| #!/bin/sh | |
| # Licensed to the Apache Software Foundation (ASF) under one | |
| # or more contributor license agreements. See the NOTICE file | |
| # distributed with this work for additional information | |
| # regarding copyright ownership. The ASF licenses this file | |
| # to you under the Apache License, Version 2.0 (the | |
| # "License"); you may not use this file except in compliance | |
| # with the License. You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, | |
| # software distributed under the License is distributed on an | |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY | |
| # KIND, either express or implied. See the License for the | |
| # specific language governing permissions and limitations | |
| # under the License. | |
| # prepare dnsmasq on external dhcp server | |
| # Usage: | |
| # sh prepare_dnsmasq gateway dns self_ip | |
| gateway=$1 | |
| dns=$2 | |
| self_ip=$3 | |
| exit_with_error() { | |
| echo $1 | |
| exit 1 | |
| } | |
| config_dnsmasq() { | |
| echo "$*" >> /etc/dnsmasq.conf | |
| [ $? -ne 0 ] && exit_with_error "echo $* failed" | |
| } | |
| [ $# -ne 3 ] && exit_with_error "Usage: prepare_dnsmasq gateway dns self_ip" | |
| [ -f /etc/dnsmasq.conf ] || exit_with_error "Can not found /etc/dnsmasq.conf" | |
| touch /var/log/dnsmasq.log | |
| [ $? -ne 0 ] && exit_with_error "touch /var/log/dnsmasq.log failed" | |
| touch /etc/dnsmasq-resolv.conf | |
| [ $? -ne 0 ] && exit_with_error "touch /etc/dnsmasq-resolv.conf failed" | |
| echo "nameserver $dns">/etc/dnsmasq-resolv.conf | |
| [ $? -ne 0 ] && exit_with_error "echo \"nameserver $dns\">/etc/dnsmasq-resolv.conf failed" | |
| touch /var/lib/dnsmasq.trace | |
| [ $? -ne 0 ] && exit_with_error "touch /var/lib/dnsmasq.trace failed" | |
| #produce echoer.sh | |
| cat > /usr/bin/echoer.sh<<'EOF' | |
| #!/bin/sh | |
| sed -i /"$*"/d /var/lib/dnsmasq.trace | |
| echo "$*" >> /var/lib/dnsmasq.trace | |
| EOF | |
| [ $? -ne 0 ] && exit_with_error "can't produce /usr/bin/echoer.sh" | |
| #produce lease_checker.sh | |
| cat > /usr/bin/lease_checker.sh<<'EOF' | |
| #!/bin/sh | |
| # Usage: lease_checker dhcp_entry_state(add/old/del) mac ip | |
| state=$1 | |
| mac=$2 | |
| ip=$3 | |
| exit_with_error() { | |
| echo $1 | |
| exit $2 | |
| } | |
| [ $# -ne 3 ] && exit_with_error "Wrong arguments.Usage: lease_checker dhcp_entry_state(add/old/del) mac ip" -3 | |
| [ -f /var/lib/dnsmasq.trace ] || exit_with_error "Cannot find /var/lib/dnsmasq" -1 | |
| pidof dnsmasq &>/dev/null | |
| [ $? -ne 0 ] && exit_with_error "Dnsmasq is not running" -2 | |
| grep "$state $mac $ip" /var/lib/dnsmasq.trace | |
| if [ $? -ne 0 ]; then | |
| exit $? | |
| else | |
| sed -i /"$state $mac $ip"/d /var/lib/dnsmasq.trace | |
| exit 0 | |
| fi | |
| EOF | |
| chmod +x /usr/bin/echoer.sh | |
| [ $? -ne 0 ] && exit_with_error "chmod +x /usr/bin/echoer.sh failed" | |
| # Configure dnsmasq with comments | |
| echo "# This is produced by CloudStack" > /etc/dnsmasq.conf | |
| config_dnsmasq "# Never forward plain names (without a dot or domain part)" | |
| config_dnsmasq domain-needed | |
| config_dnsmasq "# Never forward addresses in the non-routed address spaces." | |
| config_dnsmasq bogus-priv | |
| config_dnsmasq " | |
| # Change this line if you want dns to get its upstream servers from | |
| # somewhere other that /etc/resolv.conf" | |
| config_dnsmasq resolv-file=/etc/dnsmasq-resolv.conf | |
| config_dnsmasq " | |
| # Add local-only domains here, queries in these domains are answered | |
| # from /etc/hosts or DHCP only." | |
| config_dnsmasq local=/cloudnine.internal/ | |
| config_dnsmasq " | |
| # On systems which support it, dnsmasq binds the wildcard address, | |
| # even when it is listening on only some interfaces. It then discards | |
| # requests that it shouldn't reply to. This has the advantage of | |
| # working even when interfaces come and go and change address. If you | |
| # want dnsmasq to really bind only the interfaces it is listening on, | |
| # uncomment this option. About the only time you may need this is when | |
| # running another nameserver on the same machine." | |
| config_dnsmasq bind-interfaces | |
| config_dnsmasq " | |
| # Set this (and domain: see below) if you want to have a domain | |
| # automatically added to simple names in a hosts-file." | |
| config_dnsmasq expand-hosts | |
| config_dnsmasq " | |
| # does the following things. | |
| # 1) Allows DHCP hosts to have fully qualified domain names, as long | |
| # as the domain part matches this setting. | |
| # 2) Sets the \"domain\" DHCP option thereby potentially setting the | |
| # domain of all systems configured by DHCP | |
| # 3) Provides the domain part for \"expand-hosts\" | |
| " | |
| config_dnsmasq domain=cloudnine.internal | |
| config_dnsmasq " | |
| # Send options to hosts which ask for a DHCP lease. | |
| # See RFC 2132 for details of available options. | |
| # Common options can be given to dnsmasq by name: | |
| # run \"dnsmasq --help dhcp\" to get a list. | |
| # Note that all the common settings, such as netmask and | |
| # broadcast address, DNS server and default route, are given | |
| # sane defaults by dnsmasq. You very likely will not need | |
| # any dhcp-options. If you use Windows clients and Samba, there | |
| # are some options which are recommended, they are detailed at the | |
| # end of this section. | |
| # Override the default route supplied by dnsmasq, which assumes the | |
| # router is the same machine as the one running dnsmasq." | |
| config_dnsmasq dhcp-option=option:router,$gateway | |
| config_dnsmasq " | |
| # Uncomment this to enable the integrated DHCP server, you need | |
| # to supply the range of addresses available for lease and optionally | |
| # a lease time. If you have more than one network, you will need to | |
| # repeat this for each network on which you want to supply DHCP | |
| # service." | |
| config_dnsmasq dhcp-range=$self_ip,static | |
| config_dnsmasq dhcp-hostsfile=/etc/dhcphosts.txt | |
| config_dnsmasq "# Set the domain" | |
| config_dnsmasq dhcp-option=15,"cloudnine.internal" | |
| config_dnsmasq " | |
| # Send microsoft-specific option to tell windows to release the DHCP lease | |
| # when it shuts down. Note the \"i\" flag, to tell dnsmasq to send the | |
| # value as a four-byte integer - that's what microsoft wants. See | |
| # http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true" | |
| config_dnsmasq dhcp-option=vendor:MSFT,2,1i | |
| config_dnsmasq " | |
| # The DHCP server needs somewhere on disk to keep its lease database. | |
| # This defaults to a sane location, but if you want to change it, use | |
| # the line below. | |
| #dhcp-leasefile=/var/lib/misc/dnsmasq.leases" | |
| config_dnsmasq leasefile-ro | |
| config_dnsmasq " | |
| # For debugging purposes, log each DNS query as it passes through | |
| # dnsmasq." | |
| config_dnsmasq log-queries | |
| config_dnsmasq log-facility=/var/log/dnsmasq.log | |
| config_dnsmasq " | |
| # Run an executable when a DHCP lease is created or destroyed. | |
| # The arguments sent to the script are \"add\" or \"del\", | |
| # then the MAC address, the IP address and finally the hostname | |
| # if there is one." | |
| config_dnsmasq dhcp-script=/usr/bin/echoer.sh | |
| config_dnsmasq dhcp-scriptuser=root | |
| config_dnsmasq dhcp-authoritative | |
| config_dnsmasq " | |
| # Ignore any bootp and pxe boot request | |
| " | |
| config_dnsmasq dhcp-ignore=bootp | |
| config_dnsmasq dhcp-vendorclass=pxestuff,PXEClient | |
| config_dnsmasq dhcp-ignore=pxestuff | |
| [ -f /usr/sbin/setenforce ] && /usr/sbin/setenforce 0 | |
| [ $? -ne 0 ] && exit_with_error "Can not set seLinux to passive mode" | |
| # Open DHCP ports in iptable | |
| chkconfig --list iptables | grep "on" | |
| if [ $? -eq 0 ]; then | |
| iptables-save | grep 'A INPUT -p udp -m udp --dport 67 -j ACCEPT' >/dev/null | |
| if [ $? -ne 0 ]; then | |
| iptables -I INPUT 1 -p udp --dport 67 -j ACCEPT | |
| if [ $? -ne 0 ]; then | |
| exit_with_error "iptables -I INPUT 1 -p udp --dport 67 -j ACCEPT failed" | |
| fi | |
| echo "iptables:Open udp port 67 for DHCP" | |
| fi | |
| iptables-save | grep 'A INPUT -p tcp -m tcp --dport 67 -j ACCEPT' >/dev/null | |
| if [ $? -ne 0 ]; then | |
| iptables -I INPUT 1 -p tcp --dport 67 -j ACCEPT | |
| if [ $? -ne 0 ]; then | |
| exit_with_error "iptables -I INPUT 1 -p tcp --dport 67 -j ACCEPT failed" | |
| fi | |
| echo "iptables:Open tcp port 67 for DHCP" | |
| fi | |
| iptables-save | grep 'A INPUT -p udp -m udp --dport 53 -j ACCEPT' >/dev/null | |
| if [ $? -ne 0 ]; then | |
| iptables -I INPUT 1 -p udp --dport 53 -j ACCEPT | |
| if [ $? -ne 0 ]; then | |
| exit_with_error "iptables -I INPUT 1 -p udp --dport 53 -j ACCEPT failed" | |
| fi | |
| echo "iptables:Open udp port 53 for DHCP" | |
| fi | |
| iptables-save | grep 'A INPUT -p tcp -m tcp --dport 53 -j ACCEPT' >/dev/null | |
| if [ $? -ne 0 ]; then | |
| iptables -I INPUT 1 -p tcp --dport 53 -j ACCEPT | |
| if [ $? -ne 0 ]; then | |
| exit_with_error "iptables -I INPUT 1 -p tcp --dport 53 -j ACCEPT failed" | |
| fi | |
| echo "iptables:Open tcp port 53 for DHCP" | |
| fi | |
| service iptables save | |
| if [ $? -ne 0 ]; then | |
| exit_with_error "service iptables save failed" | |
| fi | |
| fi | |
| # Set up upstream DNS | |
| [ -f /etc/dnsmasq-resolv.conf ] || echo nameserver $dns > /etc/dnsmasq-resolv.conf | |
| [ $? -ne 0 ] && exit_with_error "cannot create /etc/dnsmasq-resolv.conf" | |
| service dnsmasq restart | |
| [ $? -ne 0 ] && exit_with_error "service dnsmasq restart failed" | |
| exit 0 |