client/WEB-INF/classes/resources/messages.properties

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
label.add.ldap.account=Add LDAP account
label.vm.ip=VM IP Address
message.listView.subselect.multi=(Ctrl/Cmd-click)
label.use.vm.ips=Use VM IPs
label.reinstall.vm=Reinstall VM
message.reinstall.vm=NOTE: Proceed with caution. This will cause the VM to be reinstalled from the template; data on the root disk will be lost. Extra data volumes, if any, will not be touched.
label.recover.vm=Recover VM
message.recover.vm=Please confirm that you would like to recover this VM.
label.port=Port
label.remove.ldap=Remove LDAP
label.configure.ldap=Configure LDAP
label.ldap.configuration=LDAP Configuration
label.ldap.port=LDAP port
label.create.nfs.secondary.staging.store=Create NFS secondary staging store
label.volatile=Volatile
label.planner.mode=Planner mode
label.deployment.planner=Deployment planner
label.quiesce.vm=Quiesce VM
label.smb.username=SMB Username
label.smb.password=SMB Password
label.smb.domain=SMB Domain
label.hypervisors=Hypervisors
label.home=Home
label.sockets=CPU Sockets
label.root.disk.size=Root disk size (GB)
label.s3.nfs.server=S3 NFS Server
label.s3.nfs.path=S3 NFS Path
label.delete.events=Delete events
label.delete.alerts=Delete alerts
label.archive.alerts=Archive alerts
label.archive.events=Archive events
label.by.alert.type=By alert type
label.by.event.type=By event type
label.by.date.start=By date (start)
label.by.date.end=By date (end)
label.switch.type=Switch Type
label.service.state=Service State
label.egress.default.policy=Egress Default Policy
label.routing=Routing
label.hvm=HVM
label.about=About
label.app.name=CloudStack
label.about.app=About CloudStack
label.custom.disk.iops=Custom IOPS
label.disk.iops.min=Min IOPS
label.disk.iops.max=Max IOPS
label.disk.iops.total=IOPS Total
label.hypervisor.snapshot.reserve=Hypervisor Snapshot Reserve
label.secondary.ips=Secondary IPs
label.edit.secondary.ips=Edit secondary IPs
label.view.secondary.ips=View secondary IPs
message.validate.invalid.characters=Invalid characters found; please correct.
message.acquire.ip.nic=Please confirm that you would like to acquire a new secondary IP for this NIC.<br/>NOTE: You need to manually configure the newly-acquired secondary IP inside the virtual machine.
message.select.affinity.groups=Please select any affinity groups you want this VM to belong to:
message.no.affinity.groups=You do not have any affinity groups. Please continue to the next step.
label.action.delete.nic=Remove NIC
message.action.delete.nic=Please confirm that want to remove this NIC, which will also remove the associated network from the VM.
changed.item.properties=Changed item properties
confirm.enable.s3=Please fill in the following information to enable support for S3-backed Secondary Storage
confirm.enable.swift=Please fill in the following information to enable support for Swift
error.could.not.change.your.password.because.ldap.is.enabled=Error could not change your password because LDAP is enabled.
error.could.not.enable.zone=Could not enable zone
error.installWizard.message=Something went wrong; you may go back and correct any errors
error.invalid.username.password=Invalid username or password
error.login=Your username/password does not match our records.
error.menu.select=Unable to perform action due to no items being selected.
error.mgmt.server.inaccessible=The Management Server is unaccessible.  Please try again later.
error.password.not.match=The password fields do not match
error.please.specify.physical.network.tags=Network offerings is not available until you specify tags for this physical network.
error.session.expired=Your session has expired.
error.something.went.wrong.please.correct.the.following=Something went wrong; please correct the following
error.unable.to.reach.management.server=Unable to reach Management Server
error.unresolved.internet.name=Your internet name cannot be resolved.
label.extractable=Extractable
force.delete.domain.warning=Warning\: Choosing this option will cause the deletion of all child domains and all associated accounts and their resources.
force.delete=Force Delete
force.remove.host.warning=Warning\: Choosing this option will cause CloudStack to forcefully stop all running virtual machines before removing this host from the cluster.
force.remove=Force Remove
force.stop.instance.warning=Warning\: Forcing a stop on this instance should be your last option. It can lead to data loss as well as inconsistent behavior of the virtual machine state.
force.stop=Force Stop
ICMP.code=ICMP Code
ICMP.type=ICMP Type
image.directory=Image Directory
inline=Inline
instances.actions.reboot.label=Reboot instance
label.accept.project.invitation=Accept project invitation
label.account.and.security.group=Account, Security group
label.account.id=Account ID
label.account.name=Account Name
label.account.specific=Account-Specific
label.account=Account
label.accounts=Accounts
label.acquire.new.ip=Acquire New IP
label.acquire.new.secondary.ip=Acquire new secondary IP
label.action.attach.disk.processing=Attaching Disk....
label.action.attach.disk=Attach Disk
label.action.attach.iso.processing=Attaching ISO....
label.action.attach.iso=Attach ISO
label.action.cancel.maintenance.mode.processing=Cancelling Maintenance Mode....
label.action.cancel.maintenance.mode=Cancel Maintenance Mode
label.action.change.password=Change Password
label.action.configure.samlauthorization=Configure SAML SSO Authorization
label.action.change.service.processing=Changing Service....
label.action.change.service=Change Service
label.action.copy.ISO.processing=Copying ISO....
label.action.copy.ISO=Copy ISO
label.action.copy.template.processing=Copying Template....
label.action.copy.template=Copy Template
label.action.create.template.from.vm=Create Template from VM
label.action.create.template.from.volume=Create Template from Volume
label.action.create.template.processing=Creating Template....
label.action.create.template=Create Template
label.action.create.vm.processing=Creating VM....
label.action.create.vm=Create VM
label.action.create.volume.processing=Creating Volume....
label.action.create.volume=Create Volume
label.action.delete.account.processing=Deleting account....
label.action.delete.account=Delete account
label.action.delete.cluster.processing=Deleting Cluster....
label.action.delete.cluster=Delete Cluster
label.action.delete.disk.offering.processing=Deleting Disk Offering....
label.action.delete.disk.offering=Delete Disk Offering
label.action.delete.domain.processing=Deleting Domain....
label.action.delete.domain=Delete Domain
label.action.delete.firewall.processing=Deleting Firewall....
label.action.delete.firewall=Delete firewall rule
label.action.delete.ingress.rule.processing=Deleting Ingress Rule....
label.action.delete.ingress.rule=Delete Ingress Rule
label.action.delete.IP.range.processing=Deleting IP Range....
label.action.delete.IP.range=Delete IP Range
label.action.delete.ISO.processing=Deleting ISO....
label.action.delete.ISO=Delete ISO
label.action.delete.load.balancer.processing=Deleting Load Balancer....
label.action.delete.load.balancer=Delete load balancer rule
label.action.delete.network.processing=Deleting Network....
label.action.delete.network=Delete Network
label.action.delete.nexusVswitch=Delete Nexus 1000v
label.action.delete.physical.network=Delete physical network
label.action.delete.pod.processing=Deleting Pod....
label.action.delete.pod=Delete Pod
label.action.delete.primary.storage.processing=Deleting Primary Storage....
label.action.delete.primary.storage=Delete Primary Storage
label.action.delete.secondary.storage.processing=Deleting Secondary Storage....
label.action.delete.secondary.storage=Delete Secondary Storage
label.action.delete.security.group.processing=Deleting Security Group....
label.action.delete.security.group=Delete Security Group
label.action.delete.service.offering.processing=Deleting Service Offering....
label.action.delete.service.offering=Delete Service Offering
label.action.delete.snapshot.processing=Deleting Snapshot....
label.action.delete.snapshot=Delete Snapshot
label.action.delete.system.service.offering=Delete System Service Offering
label.action.delete.template.processing=Deleting Template....
label.action.delete.template=Delete Template
label.action.delete.user.processing=Deleting User....
label.action.delete.user=Delete User
label.action.delete.volume.processing=Deleting Volume....
label.action.delete.volume=Delete Volume
label.action.delete.zone.processing=Deleting Zone....
label.action.delete.zone=Delete Zone
label.action.destroy.instance.processing=Destroying Instance....
label.action.destroy.instance=Destroy Instance
label.action.destroy.systemvm.processing=Destroying System VM....
label.action.destroy.systemvm=Destroy System VM
label.action.detach.disk.processing=Detaching Disk....
label.action.detach.disk=Detach Disk
label.action.detach.iso.processing=Detaching ISO....
label.action.detach.iso=Detach ISO
label.action.disable.account.processing=Disabling account....
label.action.disable.account=Disable account
label.action.disable.cluster.processing=Disabling Cluster....
label.action.disable.cluster=Disable Cluster
label.action.disable.nexusVswitch=Disable Nexus 1000v
label.action.disable.physical.network=Disable physical network
label.action.disable.pod.processing=Disabling Pod....
label.action.disable.pod=Disable Pod
label.action.disable.static.NAT.processing=Disabling Static NAT....
label.action.disable.static.NAT=Disable Static NAT
label.action.disable.user.processing=Disabling User....
label.action.disable.user=Disable User
label.action.disable.zone.processing=Disabling Zone....
label.action.disable.zone=Disable Zone
label.action.download.ISO=Download ISO
label.action.download.template=Download Template
label.action.download.volume.processing=Downloading Volume....
label.action.download.volume=Download Volume
label.action.edit.account=Edit account
label.action.edit.disk.offering=Edit Disk Offering
label.action.edit.domain=Edit Domain
label.action.edit.global.setting=Edit Global Setting
label.action.edit.host=Edit Host
label.action.edit.instance=Edit Instance
label.action.edit.ISO=Edit ISO
label.action.edit.network.offering=Edit Network Offering
label.action.edit.network.processing=Editing Network....
label.action.edit.network=Edit Network
label.action.edit.pod=Edit Pod
label.action.edit.primary.storage=Edit Primary Storage
label.action.edit.resource.limits=Edit Resource Limits
label.action.edit.service.offering=Edit Service Offering
label.action.edit.template=Edit Template
label.action.edit.user=Edit User
label.action.edit.zone=Edit Zone
label.action.enable.account.processing=Enabling account....
label.action.enable.account=Enable account
label.action.enable.cluster.processing=Enabling Cluster....
label.action.enable.cluster=Enable Cluster
label.action.enable.maintenance.mode.processing=Enabling Maintenance Mode....
label.action.enable.maintenance.mode=Enable Maintenance Mode
label.action.enable.nexusVswitch=Enable Nexus 1000v
label.action.enable.physical.network=Enable physical network
label.action.enable.pod.processing=Enabling Pod....
label.action.enable.pod=Enable Pod
label.action.enable.static.NAT.processing=Enabling Static NAT....
label.action.enable.static.NAT=Enable Static NAT
label.action.enable.user.processing=Enabling User....
label.action.enable.user=Enable User
label.action.enable.zone.processing=Enabling Zone....
label.action.enable.zone=Enable Zone
label.action.expunge.instance=Expunge Instance
label.action.expunge.instance.processing=Expunging Instance....
label.action.force.reconnect.processing=Reconnecting....
label.action.force.reconnect=Force Reconnect
label.action.generate.keys.processing=Generate Keys....
label.action.generate.keys=Generate Keys
label.action.list.nexusVswitch=List Nexus 1000v
label.action.lock.account.processing=Locking account....
label.action.lock.account=Lock account
label.action.manage.cluster.processing=Managing Cluster....
label.action.manage.cluster=Manage Cluster
label.action.migrate.instance.processing=Migrating Instance....
label.action.migrate.instance=Migrate Instance
label.action.migrate.router.processing=Migrating Router....
label.action.migrate.router=Migrate Router
label.action.migrate.systemvm.processing=Migrating System VM....
label.action.migrate.systemvm=Migrate System VM
label.action.reboot.instance.processing=Rebooting Instance....
label.action.reboot.instance=Reboot Instance
label.action.reboot.router.processing=Rebooting Router....
label.action.reboot.router=Reboot Router
label.action.reboot.systemvm.processing=Rebooting System VM....
label.action.reboot.systemvm=Reboot System VM
label.action.recurring.snapshot=Recurring Snapshots
label.action.register.iso=Register ISO
label.action.register.template=Register Template from URL
label.action.release.ip.processing=Releasing IP....
label.action.release.ip=Release IP
label.action.remove.host.processing=Removing Host....
label.action.remove.host=Remove Host
label.action.reset.password.processing=Resetting Password....
label.action.reset.password=Reset Password
label.action.resize.volume.processing=Resizing Volume....
label.action.resize.volume=Resize Volume
label.action.resource.limits=Resource limits
label.action.restore.instance.processing=Restoring Instance....
label.action.restore.instance=Restore Instance
label.action.start.instance.processing=Starting Instance....
label.action.start.instance=Start Instance
label.action.start.router.processing=Starting Router....
label.action.start.router=Start Router
label.action.start.systemvm.processing=Starting System VM....
label.action.start.systemvm=Start System VM
label.action.stop.instance.processing=Stopping Instance....
label.action.stop.instance=Stop Instance
label.action.stop.router.processing=Stopping Router....
label.action.stop.router=Stop Router
label.action.stop.systemvm.processing=Stopping System VM....
label.action.stop.systemvm=Stop System VM
label.action.take.snapshot.processing=Taking Snapshot....
label.action.take.snapshot=Take Snapshot
label.action.revert.snapshot.processing=Reverting to Snapshot...
label.action.revert.snapshot=Revert to Snapshot
label.action.unmanage.cluster.processing=Unmanaging Cluster....
label.action.unmanage.cluster=Unmanage Cluster
label.action.update.OS.preference.processing=Updating OS Preference....
label.action.update.OS.preference=Update OS Preference
label.action.update.resource.count.processing=Updating Resource Count....
label.action.update.resource.count=Update Resource Count
label.action.vmsnapshot.create=Take VM Snapshot
label.action.vmsnapshot.delete=Delete VM snapshot
label.action.vmsnapshot.revert=Revert to VM snapshot
label.actions=Actions
label.activate.project=Activate Project
label.active.sessions=Active Sessions
label.add.account.to.project=Add account to project
label.add.account=Add Account
label.add.accounts.to=Add accounts to
label.add.accounts=Add accounts
label.add.ACL=Add ACL
label.add.affinity.group=Add new affinity group
label.add.BigSwitchBcf.device=Add BigSwitch BCF Controller
label.add.by.cidr=Add By CIDR
label.add.by.group=Add By Group
label.add.by=Add by
label.add.cluster=Add Cluster
label.add.compute.offering=Add compute offering
label.add.direct.iprange=Add Direct Ip Range
label.add.disk.offering=Add Disk Offering
label.add.domain=Add Domain
label.add.egress.rule=Add egress rule
label.add.F5.device=Add F5 device
label.add.firewall=Add firewall rule
label.add.guest.network=Add guest network
label.add.isolated.guest.network=Add Isolated Guest Network
label.add.host=Add Host
label.add.ingress.rule=Add Ingress Rule
label.add.intermediate.certificate=Add intermediate certificate
label.add.ip.range=Add IP Range
label.add.load.balancer=Add Load Balancer
label.add.more=Add More
label.add.netScaler.device=Add Netscaler device
label.add.network.ACL=Add network ACL
label.add.network.device=Add Network Device
label.add.network.offering=Add network offering
label.add.network=Add Network
label.add.new.F5=Add new F5
label.add.new.gateway=Add new gateway
label.add.new.NetScaler=Add new NetScaler
label.add.new.SRX=Add new SRX
label.add.new.PA=Add new Palo Alto
label.add.new.tier=Add new tier
label.add.NiciraNvp.device=Add Nvp Controller
label.add.NuageVsp.device=Add Nuage Virtualized Services Directory (VSD)
label.add.BrocadeVcs.device=Add Brocade Vcs Switch
label.add.physical.network=Add physical network
label.add.pod=Add Pod
label.add.port.forwarding.rule=Add port forwarding rule
label.add.primary.storage=Add Primary Storage
label.add.region=Add Region
label.add.resources=Add Resources
label.add.route=Add route
label.add.rule=Add rule
label.add.secondary.storage=Add Secondary Storage
label.add.security.group=Add Security Group
label.add.service.offering=Add Service Offering
label.add.SRX.device=Add SRX device
label.add.PA.device=Add Palo Alto device
label.add.static.nat.rule=Add static NAT rule
label.add.static.route=Add static route
label.add.system.service.offering=Add System Service Offering
label.add.template=Add Template
label.add.to.group=Add to group
label.add.user=Add User
label.add.userdata=Userdata
label.add.vlan=Add VLAN
label.add.vxlan=Add VXLAN
label.add.VM.to.tier=Add VM to tier
label.add.vm=Add VM
label.add.vms.to.lb=Add VM(s) to load balancer rule
label.add.vms=Add VMs
label.add.volume=Add Volume
label.add.vpc=Add VPC
label.add.vpn.customer.gateway=Add VPN Customer Gateway
label.add.VPN.gateway=Add VPN Gateway
label.add.vpn.user=Add VPN user
label.add.zone=Add Zone
label.add=Add
label.adding.cluster=Adding Cluster
label.adding.failed=Adding Failed
label.adding.pod=Adding Pod
label.adding.processing=Adding....
label.adding.succeeded=Adding Succeeded
label.adding.user=Adding User
label.adding.zone=Adding Zone
label.adding=Adding
label.additional.networks=Additional Networks
label.admin.accounts=Admin Accounts
label.admin=Admin
label.advanced.mode=Advanced Mode
label.advanced.search=Advance Search
label.advanced=Advanced
label.affinity.group=Affinity Group
label.affinity.groups=Affinity Groups
label.affinity=Affinity
label.agent.password=Agent Password
label.agent.port=Agent Port
label.agent.username=Agent Username
label.agree=Agree
label.alert=Alert
label.algorithm=Algorithm
label.allocated=Allocated
label.allocation.state=Allocation State
label.anti.affinity.group=Anti-affinity Group
label.anti.affinity.groups=Anti-affinity Groups
label.anti.affinity=Anti-affinity
label.api.key=API Key
label.api.version=API Version
label.apply=Apply
label.assign.to.load.balancer=Assigning instance to load balancer
label.assign=Assign
label.associated.network.id=Associated Network ID
label.associated.network=Associated Network
label.attached.iso=Attached ISO
label.author.email=Author e-mail
label.author.name=Author name
label.availability.zone=Availability Zone
label.availability=Availability
label.available.public.ips=Available Public IP Addresses
label.available=Available
label.back=Back
label.bandwidth=Bandwidth
label.basic.mode=Basic Mode
label.basic=Basic
label.bigswitch.controller.address=BigSwitch BCF Controller Address
label.bootable=Bootable
label.broadcast.domain.range=Broadcast domain range
label.broadcast.domain.type=Broadcast Domain Type
label.broadcast.uri=Broadcast URI
label.by.account=By Account
label.by.availability=By Availability
label.by.domain=By Domain
label.by.end.date=By End Date
label.by.level=By Level
label.by.pod=By Pod
label.by.role=By Role
label.by.start.date=By Start Date
label.by.state=By State
label.by.traffic.type=By Traffic Type
label.by.type.id=By Type ID
label.by.type=By Type
label.by.zone=By Zone
label.bytes.received=Bytes Received
label.bytes.sent=Bytes Sent
label.cancel=Cancel
label.capacity=Capacity
label.capacity.bytes=Capacity Bytes
label.capacity.iops=Capacity IOPS
label.certificate=Server certificate
label.change.ipaddress=Change IP address for NIC
label.change.service.offering=Change service offering
label.change.value=Change value
label.character=Character
label.md5.checksum=MD5 checksum
label.cidr.account=CIDR or Account/Security Group
label.CIDR.list=CIDR list
label.cidr.list=Source CIDR
label.CIDR.of.destination.network=CIDR of destination network
label.cidr=CIDR
label.clean.up=Clean up
label.make.redundant=Make redundant
label.clear.list=Clear list
label.close=Close
label.cloud.console=Cloud Management Console
label.cloud.managed=Cloud.com Managed
label.cluster.name=Cluster Name
label.cluster.type=Cluster Type
label.cluster=Cluster
label.clusters=Clusters
label.clvm=CLVM
label.custom.disk.offering=Custom Disk Offering
label.rbd=RBD
label.rbd.monitor=Ceph monitor
label.rbd.pool=Ceph pool
label.rbd.id=Cephx user
label.rbd.secret=Cephx secret
label.code=Code
label.community=Community
label.compute.and.storage=Compute and Storage
label.compute.offering=Compute offering
label.compute.offerings=Compute Offerings
label.compute=Compute
label.configuration=Configuration
label.configure.network.ACLs=Configure Network ACLs
label.configure.vpc=Configure VPC
label.configure=Configure
label.confirm.password=Confirm password
label.confirmation=Confirmation
label.congratulations=Congratulations\!
label.conserve.mode=Conserve mode
label.console.proxy=Console proxy
label.continue.basic.install=Continue with basic installation
label.continue=Continue
label.corrections.saved=Corrections saved
label.cpu.allocated.for.VMs=CPU Allocated for VMs
label.cpu.allocated=CPU Allocated
label.CPU.cap=CPU Cap
label.cpu.limits=CPU limits
label.cpu.mhz=CPU (in MHz)
label.cpu.utilized=CPU Utilized
label.cpu=CPU
label.create.project=Create project
label.create.ssh.key.pair=Create a SSH Key Pair
label.create.template=Create template
label.create.VPN.connection=Create VPN Connection
label.created.by.system=Created by system
label.created=Created
label.cross.zones=Cross Zones
label.custom.disk.size=Custom Disk Size
label.daily=Daily
label.data.disk.offering=Data Disk Offering
label.date=Date
label.day.of.month=Day of Month
label.day.of.week=Day of Week
label.dead.peer.detection=Dead Peer Detection
label.decline.invitation=Decline invitation
label.dedicated=Dedicated
label.default.use=Default Use
label.default.view=Default View
label.default=Default
label.delete.affinity.group=Delete Affinity Group
label.delete.BigSwitchBcf=Remove BigSwitch BCF Controller
label.delete.F5=Delete F5
label.delete.gateway=Delete gateway
label.delete.NetScaler=Delete NetScaler
label.delete.NiciraNvp=Remove Nvp Controller
label.delete.NuageVsp=Remove Nuage VSD
label.delete.BrocadeVcs=Remove Brocade Vcs Switch
label.delete.project=Delete project
label.delete.SRX=Delete SRX
label.delete.PA=Delete Palo Alto
label.delete.VPN.connection=Delete VPN connection
label.delete.VPN.customer.gateway=Delete VPN Customer Gateway
label.delete.VPN.gateway=Delete VPN Gateway
label.delete.vpn.user=Delete VPN user
label.delete=Delete
label.deleting.failed=Deleting Failed
label.deleting.processing=Deleting....
label.description=Description
label.destination.physical.network.id=Destination physical network ID
label.destination.zone=Destination Zone
label.destroy.router=Destroy router
label.destroy=Destroy
label.detaching.disk=Detaching Disk
label.details=Details
label.device.id=Device ID
label.devices=Devices
label.DHCP.server.type=DHCP Server Type
label.dhcp=DHCP
label.direct.ips=Shared Network IPs
label.disable.provider=Disable provider
label.disable.vpn=Disable Remote Access VPN
label.disabled=Disabled
label.disabling.vpn.access=Disabling VPN Access
label.disk.allocated=Disk Allocated
label.disk.bytes.read.rate=Disk Read Rate (BPS)
label.disk.bytes.write.rate=Disk Write Rate (BPS)
label.disk.iops.read.rate=Disk Read Rate (IOPS)
label.disk.iops.write.rate=Disk Write Rate (IOPS)
label.disk.offering=Disk Offering
label.disk.provisioningtype=Provisioning Type
label.disk.read.bytes=Disk Read (Bytes)
label.disk.read.io=Disk Read (IO)
label.disk.size.gb=Disk Size (in GB)
label.disk.size=Disk Size
label.disk.total=Disk Total
label.disk.volume=Disk Volume
label.disk.write.bytes=Disk Write (Bytes)
label.disk.write.io=Disk Write (IO)
label.display.text=Display Text
label.dns.1=DNS 1
label.dns.2=DNS 2
label.DNS.domain.for.guest.networks=DNS domain for Guest Networks
label.dns=DNS
label.domain.admin=Domain Admin
label.domain.id=Domain ID
label.domain.name=Domain Name
label.domain.router=Domain router
label.domain.suffix=DNS Domain Suffix (i.e., xyz.com)
label.domain=Domain
label.done=Done
label.double.quotes.are.not.allowed=Double quotes are not allowed
label.download.progress=Download Progress
label.drag.new.position=Drag to new position
label.edit.affinity.group=Edit Affinity Group
label.edit.lb.rule=Edit LB rule
label.edit.network.details=Edit network details
label.edit.project.details=Edit project details
label.edit.tags=Edit tags
label.edit.traffic.type=Edit traffic type
label.edit.vpc=Edit VPC
label.edit=Edit
label.egress.rule=Egress rule
label.egress.rules=Egress rules
label.elastic.IP=Elastic IP
label.elastic.LB=Elastic LB
label.elastic=Elastic
label.email=Email
label.enable.provider=Enable provider
label.enable.s3=Enable S3-backed Secondary Storage
label.enable.swift=Enable Swift
label.enable.vpn=Enable Remote Access VPN
label.enabling.vpn.access=Enabling VPN Access
label.enabling.vpn=Enabling VPN
label.end.IP=End IP
label.end.port=End Port
label.end.reserved.system.IP=End Reserved system IP
label.end.vlan=End VLAN
label.end.vxlan=End VXLAN
label.endpoint.or.operation=Endpoint or Operation
label.endpoint=Endpoint
label.enter.token=Enter token
label.error.code=Error Code
label.error=Error
label.ESP.encryption=ESP Encryption
label.ESP.hash=ESP Hash
label.ESP.lifetime=ESP Lifetime (second)
label.ESP.policy=ESP policy
label.esx.host=ESX/ESXi Host
label.example=Example
label.expunge=Expunge
label.external.link=External link
label.f5=F5
label.failed=Failed
label.featured=Featured
label.fetch.latest=Fetch latest
label.fingerprint=FingerPrint
label.filterBy=Filter by
label.firewall=Firewall
label.first.name=First Name
label.format=Format
label.friday=Friday
label.full.path=Full path
label.full=Full
label.gateway=Gateway
label.general.alerts=General Alerts
label.generating.url=Generating URL
label.gluster.volume=Volume
label.go.step.2=Go to Step 2
label.go.step.3=Go to Step 3
label.go.step.4=Go to Step 4
label.go.step.5=Go to Step 5
label.group.optional=Group (Optional)
label.group=Group
label.guest.cidr=Guest CIDR
label.guest.end.ip=Guest end IP
label.guest.gateway=Guest Gateway
label.guest.ip.range=Guest IP Range
label.guest.ip=Guest IP Address
label.guest.netmask=Guest Netmask
label.guest.networks=Guest networks
label.guest.start.ip=Guest start IP
label.guest.traffic=Guest Traffic
label.guest.type=Guest Type
label.guest=Guest
label.ha.enabled=HA Enabled
label.help=Help
label.hide.ingress.rule=Hide Ingress Rule
label.hints=Hints
label.host.alerts=Hosts in Alert State
label.host.MAC=Host MAC
label.host.name=Host Name
label.host.tag=Host Tag
label.host.tags=Host Tags
label.host=Host
label.hosts=Hosts
label.hourly=Hourly
label.hypervisor.capabilities=Hypervisor capabilities
label.hypervisor.type=Hypervisor Type
label.hypervisor.version=Hypervisor version
label.hypervisor=Hypervisor
label.id=ID
label.IKE.DH=IKE DH
label.IKE.encryption=IKE Encryption
label.IKE.hash=IKE Hash
label.IKE.lifetime=IKE lifetime (second)
label.IKE.policy=IKE policy
label.info=Info
label.ingress.rule=Ingress Rule
label.initiated.by=Initiated By
label.installWizard.addClusterIntro.subtitle=What is a cluster?
label.installWizard.addClusterIntro.title=Let&rsquo;s add a cluster
label.installWizard.addHostIntro.subtitle=What is a host?
label.installWizard.addHostIntro.title=Let&rsquo;s add a host
label.installWizard.addPodIntro.subtitle=What is a pod?
label.installWizard.addPodIntro.title=Let&rsquo;s add a pod
label.installWizard.addPrimaryStorageIntro.subtitle=What is primary storage?
label.installWizard.addPrimaryStorageIntro.title=Let&rsquo;s add primary storage
label.installWizard.addSecondaryStorageIntro.subtitle=What is secondary storage?
label.installWizard.addSecondaryStorageIntro.title=Let&rsquo;s add secondary storage
label.installWizard.addZone.title=Add zone
label.installWizard.addZoneIntro.subtitle=What is a zone?
label.installWizard.addZoneIntro.title=Let&rsquo;s add a zone
label.installWizard.click.launch=Click the launch button.
label.installWizard.subtitle=This tour will aid you in setting up your CloudStack&\#8482 installation
label.installWizard.title=Hello and Welcome to CloudStack&\#8482
label.instance.limits=Instance Limits
label.instance.name=Instance Name
label.instance=Instance
label.instances=Instances
label.intermediate.certificate=Intermediate certificate {0}
label.internal.dns.1=Internal DNS 1
label.internal.dns.2=Internal DNS 2
label.internal.name=Internal name
label.interval.type=Interval Type
label.introduction.to.cloudstack=Introduction to CloudStack&\#8482
label.invalid.integer=Invalid Integer
label.invalid.number=Invalid Number
label.invitations=Invitations
label.invite.to=Invite to
label.invite=Invite
label.invited.accounts=Invited accounts
label.ip.address=IP Address
label.ip.allocations=IP Allocations
label.ip.limits=Public IP Limits
label.ip.or.fqdn=IP or FQDN
label.ip.range=IP Range
label.ip.ranges=IP Ranges
label.ip=IP
label.ipaddress=IP Address
label.ips=IPs
label.IPsec.preshared.key=IPsec Preshared-Key
label.is.default=Is Default
label.is.redundant.router=Redundant
label.is.shared=Is Shared
label.is.system=Is System
label.iscsi=iSCSI
label.iso.boot=ISO Boot
label.iso=ISO
label.isolated.networks=Isolated networks
label.isolation.method=Isolation method
label.isolation.mode=Isolation Mode
label.isolation.uri=Isolation URI
label.item.listing=Item listing
label.keep=Keep
label.key=Key
label.keyboard.type=Keyboard type
label.kvm.traffic.label=KVM traffic label
label.label=Label
label.lang.arabic=Arabic
label.lang.brportugese=Brazilian Portugese
label.lang.catalan=Catalan
label.lang.chinese=Chinese (Simplified)
label.lang.dutch=Dutch (Netherlands)
label.lang.english=English
label.lang.french=French
label.lang.german=German
label.lang.italian=Italian
label.lang.japanese=Japanese
label.lang.korean=Korean
label.lang.norwegian=Norwegian
label.lang.polish=Polish
label.lang.russian=Russian
label.lang.spanish=Spanish
label.lang.hungarian=Hungarian
label.last.disconnected=Last Disconnected
label.last.name=Last Name
label.latest.events=Latest events
label.launch.vm=Launch VM
label.launch.zone=Launch zone
label.launch=Launch
label.lb.algorithm.leastconn=Least connections
label.lb.algorithm.roundrobin=Round-robin
label.lb.algorithm.source=Source
label.LB.isolation=LB isolation
label.level=Level
label.linklocal.ip=Link Local IP Address
label.load.balancer=Load Balancer
label.load.balancing.policies=Load balancing policies
label.load.balancing=Load Balancing
label.loading=Loading
label.local.storage.enabled=Enable local storage for User VMs
label.local.storage.enabled.system.vms=Enable local storage for System VMs
label.local.storage=Local Storage
label.local=Local
label.local.file=Local file
label.login=Login
label.logout=Logout
label.saml.enable=Authorize SAML SSO
label.saml.entity=Identity Provider
label.add.LDAP.account=Add LDAP Account
label.LUN.number=LUN \#
label.lun=LUN
label.make.project.owner=Make account project owner
label.manage.resources=Manage Resources
label.management.server=Management Server
label.manage=Manage
label.managed=Managed
label.management.ips=Management IP Addresses
label.management=Management
label.max.cpus=Max. CPU cores
label.max.guest.limit=Max guest limit
label.max.memory=Max. memory (MiB)
label.max.networks=Max. networks
label.max.primary.storage=Max. primary (GiB)
label.max.public.ips=Max. public IPs
label.max.secondary.storage=Max. secondary (GiB)
label.max.snapshots=Max. snapshots
label.max.templates=Max. templates
label.max.vms=Max. user VMs
label.max.volumes=Max. volumes
label.max.vpcs=Max. VPCs
label.maximum=Maximum
label.may.continue=You may now continue.
label.memory.allocated=Memory Allocated
label.memory.limits=Memory limits (MiB)
label.memory.mb=Memory (in MB)
label.memory.total=Memory Total
label.memory.used=Memory Used
label.memory=Memory
label.menu.accounts=Accounts
label.menu.alerts=Alerts
label.menu.all.accounts=All Accounts
label.menu.all.instances=All Instances
label.menu.community.isos=Community ISOs
label.menu.community.templates=Community Templates
label.menu.configuration=Configuration
label.menu.dashboard=Dashboard
label.menu.destroyed.instances=Destroyed Instances
label.menu.disk.offerings=Disk Offerings
label.menu.domains=Domains
label.menu.events=Events
label.menu.featured.isos=Featured ISOs
label.menu.featured.templates=Featured Templates
label.menu.global.settings=Global Settings
label.menu.infrastructure=Infrastructure
label.menu.instances=Instances
label.menu.ipaddresses=IP Addresses
label.menu.isos=ISOs
label.menu.my.accounts=My Accounts
label.menu.my.instances=My Instances
label.menu.my.isos=My ISOs
label.menu.my.templates=My Templates
label.menu.network.offerings=Network Offerings
label.menu.network=Network
label.menu.physical.resources=Physical Resources
label.menu.regions=Regions
label.menu.running.instances=Running Instances
label.menu.security.groups=Security Groups
label.menu.service.offerings=Service Offerings
label.menu.snapshots=Snapshots
label.menu.stopped.instances=Stopped Instances
label.menu.storage=Storage
label.menu.system.service.offerings=System Offerings
label.menu.system.vms=System VMs
label.menu.system=System
label.menu.templates=Templates
label.menu.virtual.appliances=Virtual Appliances
label.menu.virtual.resources=Virtual Resources
label.menu.volumes=Volumes
label.menu.sshkeypair=SSH KeyPair
label.metrics=Metrics
label.metrics.allocated=Allocated
label.metrics.clusters=Clusters
label.metrics.cpu.allocated=CPU Allocation
label.metrics.cpu.max.dev=Deviation
label.metrics.cpu.total=Total
label.metrics.cpu.usage=CPU Usage
label.metrics.cpu.used.avg=Used
label.metrics.disk=Disk
label.metrics.disk.iops.total=IOPS
label.metrics.disk.read=Read
label.metrics.disk.size=Size
label.metrics.disk.storagetype=Type
label.metrics.disk.usage=Disk Usage
label.metrics.disk.used=Used
label.metrics.disk.total=Total
label.metrics.disk.allocated=Allocated
label.metrics.disk.unallocated=Unallocated
label.metrics.disk.write=Write
label.metrics.hosts=Hosts
label.metrics.memory.allocated=Mem Allocation
label.metrics.memory.max.dev=Deviation
label.metrics.memory.total=Total
label.metrics.memory.usage=Mem Usage
label.metrics.memory.used.avg=Used
label.metrics.name=Name
label.metrics.network.usage=Network Usage
label.metrics.network.read=Read
label.metrics.network.write=Write
label.metrics.num.cpu.cores=Cores
label.metrics.property=Property
label.metrics.scope=Scope
label.metrics.state=State
label.metrics.outofbandmanagementpowerstate=Power State
label.metrics.storagepool=Storage Pool
label.metrics.vm.name=VM Name
label.migrate.instance.to.host=Migrate instance to another host
label.migrate.instance.to.ps=Migrate instance to another primary storage
label.migrate.instance.to=Migrate instance to
label.migrate.router.to=Migrate Router to
label.migrate.systemvm.to=Migrate System VM to
label.migrate.to.host=Migrate to host
label.migrate.to.storage=Migrate to storage
label.migrate.volume.to.primary.storage=Migrate volume to another primary storage
label.migrate.volume=Migrate Volume
label.minimum=Minimum
label.minute.past.hour=minute(s) past the hour
label.monday=Monday
label.monthly=Monthly
label.more.templates=More Templates
label.move.down.row=Move down one row
label.move.to.bottom=Move to bottom
label.move.to.top=Move to top
label.move.up.row=Move up one row
label.my.account=My Account
label.my.network=My network
label.my.templates=My templates
label.na=N/A
label.name.optional=Name (Optional)
label.name=Name
label.nat.port.range=NAT Port Range
label.netmask=Netmask
label.netScaler=NetScaler
label.network.ACL.total=Network ACL Total
label.network.ACL=Network ACL
label.network.ACLs=Network ACLs
label.network.desc=Network Desc
label.network.device.type=Network Device Type
label.network.device=Network Device
label.network.domain.text=Network domain
label.network.domain=Network Domain
label.network.id=Network ID
label.network.label.display.for.blank.value=Use default gateway
label.network.limits=Network limits
label.network.name=Network Name
label.network.offering.display.text=Network Offering Display Text
label.network.offering.id=Network Offering ID
label.network.offering.name=Network Offering Name
label.network.offering=Network Offering
label.network.rate.megabytes=Network Rate (MB/s)
label.network.rate=Network Rate (Mb/s)
label.network.read=Network Read
label.network.service.providers=Network Service Providers
label.network.type=Network Type
label.network.write=Network Write
label.network=Network
label.networking.and.security=Networking and security
label.networks=Networks
label.new.password=New Password
label.new.project=New Project
label.new.ssh.key.pair=New SSH Key Pair
label.new.vm=New VM
label.new=New
label.next=Next
label.nexusVswitch=Nexus 1000v
label.nfs.server=NFS Server
label.nfs.storage=NFS Storage
label.nfs=NFS
label.nic.adapter.type=NIC adapter type
label.nicira.controller.address=Controller Address
label.nicira.l2gatewayserviceuuid=L2 Gateway Service Uuid
label.nicira.l3gatewayserviceuuid=L3 Gateway Service Uuid
label.nicira.transportzoneuuid=Transport Zone Uuid
label.brocade.vcs.address=Vcs Switch Address
label.nics=NICs
label.no.actions=No Available Actions
label.no.alerts=No Recent Alerts
label.no.data=No data to show
label.no.errors=No Recent Errors
label.no.isos=No available ISOs
label.no.items=No Available Items
label.no.security.groups=No Available Security Groups
label.no.thanks=No thanks
label.no=No
label.none=None
label.not.found=Not Found
label.notifications=Notifications
label.num.cpu.cores=\# of CPU Cores
label.number.of.clusters=Number of Clusters
label.number.of.hosts=Number of Hosts
label.number.of.pods=Number of Pods
label.number.of.system.vms=Number of System VMs
label.number.of.virtual.routers=Number of Virtual Routers
label.number.of.zones=Number of Zones
label.numretries=Number of Retries
label.ocfs2=OCFS2
label.offer.ha=Offer HA
label.ok=OK
label.optional=Optional
label.order=Order
label.os.preference=OS Preference
label.os.type=OS Type
label.ovm3.vip=Master Vip IP
label.ovm3.pool=Native Pooling
label.ovm3.cluster=Native Clustering
label.ovm3.traffic.label=OVM3 traffic label
label.owned.public.ips=Owned Public IP Addresses
label.owner.account=Owner Account
label.owner.domain=Owner Domain
label.PA.log.profile=Palo Alto Log Profile
label.PA.threat.profile=Palo Alto Threat Profile
label.parent.domain=Parent Domain
label.password.enabled=Password Enabled
label.password=Password
label.path=Path
label.perfect.forward.secrecy=Perfect Forward Secrecy
label.physical.network.ID=Physical network ID
label.physical.network=Physical Network
label.PING.CIFS.password=PING CIFS password
label.PING.CIFS.username=PING CIFS username
label.PING.dir=PING Directory
label.PING.storage.IP=PING storage IP
label.please.specify.netscaler.info=Please specify Netscaler info
label.please.wait=Please Wait
label.plugin.details=Plugin details
label.plugins=Plugins
label.pod.name=Pod name
label.pod=Pod
label.pods=Pods
label.port.forwarding.policies=Port forwarding policies
label.port.forwarding=Port Forwarding
label.port.range=Port Range
label.powerstate=Power State
label.outofbandmanagement=Out-of-band Management
label.outofbandmanagement.action.issue=Issue Out-of-band Management Power Action
label.outofbandmanagement.action=Action
label.outofbandmanagement.address=Address
label.outofbandmanagement.changepassword=Change Out-of-band Management Password
label.outofbandmanagement.configure=Configure Out-of-band Management
label.outofbandmanagement.driver=Driver
label.outofbandmanagement.disable=Disable Out-of-band Management
label.outofbandmanagement.enable=Enable Out-of-band Management
label.outofbandmanagement.password=Password
label.outofbandmanagement.reenterpassword=Re-enter Password
label.outofbandmanagement.port=Port
label.outofbandmanagement.username=Username
message.outofbandmanagement.changepassword=Change Out-of-band Management password
message.outofbandmanagement.configure=Configure Out-of-band Management
message.outofbandmanagement.disable=Disable Out-of-band Management
message.outofbandmanagement.enable=Enable Out-of-band Management
message.outofbandmanagement.issue=Issue Out-of-band Management Power Action
message.outofbandmanagement.action.maintenance=Warning host is in maintenance mode
label.PreSetup=PreSetup
label.prev=Prev
label.previous=Previous
label.primary.allocated=Primary Storage Allocated
label.primary.network=Primary Network
label.primary.storage.count=Primary Storage Pools
label.primary.storage.limits=Primary Storage limits (GiB)
label.primary.storage=Primary Storage
label.primary.used=Primary Storage Used
label.private.Gateway=Private Gateway
label.private.interface=Private Interface
label.private.ip.range=Private IP Range
label.private.ip=Private IP Address
label.private.ips=Private IP Addresses
label.private.key=Private Key
label.private.network=Private network
label.private.port=Private Port
label.private.zone=Private Zone
label.privatekey=PKCS\#8 Private Key
label.project.dashboard=Project dashboard
label.project.id=Project ID
label.project.invite=Invite to project
label.project.name=Project name
label.project.view=Project View
label.project=Project
label.projects=Projects
label.protocol=Protocol
label.provider=Provider
label.providers=Providers
label.public.interface=Public Interface
label.public.ip=Public IP Address
label.public.ips=Public IP Addresses
label.public.key=Public Key
label.public.network=Public network
label.public.port=Public Port
label.public.traffic=Public traffic
label.public.zone=Public Zone
label.public=Public
label.purpose=Purpose
label.Pxe.server.type=Pxe Server Type
label.quickview=Quickview
label.reboot=Reboot
label.recent.errors=Recent Errors
label.redundant.router.capability=Redundant router capability
label.redundant.router=Redundant Router
label.redundant.vpc=Redundant VPC
label.redundant.state=Redundant state
label.refresh=Refresh
label.region=Region
label.related=Related
label.remind.later=Remind me later
label.remove.ACL=Remove ACL
label.remove.egress.rule=Remove egress rule
label.remove.from.load.balancer=Removing instance from load balancer
label.remove.ingress.rule=Remove ingress rule
label.remove.ip.range=Remove IP range
label.remove.pf=Remove port forwarding rule
label.remove.project.account=Remove account from project
label.remove.region=Remove Region
label.remove.rule=Remove rule
label.remove.ssh.key.pair=Remove SSH Key Pair
label.remove.static.nat.rule=Remove static NAT rule
label.remove.static.route=Remove static route
label.remove.tier=Remove tier
label.remove.vm.from.lb=Remove VM from load balancer rule
label.remove.vpc=Remove VPC
label.removing.user=Removing User
label.removing=Removing
label.required=Required
label.reserved.system.gateway=Reserved system gateway
label.reserved.system.ip=Reserved System IP
label.reserved.system.netmask=Reserved system netmask
label.reset.ssh.key.pair=Reset SSH Key Pair
label.reset.ssh.key.pair.on.vm=Reset SSH Key Pair on VM
label.reset.VPN.connection=Reset VPN connection
label.resize.new.offering.id=New Offering
label.resize.new.size=New Size (GB)
label.resize.shrink.ok=Shrink OK
label.resource.limits=Resource Limits
label.resource.state=Resource state
label.resource=Resource
label.resources=Resources
label.restart.network=Restart network
label.restart.required=Restart required
label.restart.vpc=Restart VPC
message.restart.vpc.remark=Please confirm that you want to restart the VPC <p><small><i>Remark: making a non-redundant VPC redundant will force a clean up. The networks will not be available for a couple of minutes</i>.</small></p>
label.restore=Restore
label.retry.interval=Retry Interval
label.review=Review
label.revoke.project.invite=Revoke invitation
label.role=Role
label.roles=Roles
label.roletype=Role Type
label.add.role=Add Role
label.edit.role=Edit Role
label.delete.role=Delete Role
message.role.ordering.fail=Reordering of rule permissions aborted as the list has changed while you were making changes. Please try again.
label.root.certificate=Root certificate
label.root.disk.controller=Root disk controller
label.root.disk.offering=Root Disk Offering
label.permission=Permission
label.rule=Rule
label.rules=Rules
label.running.vms=Running VMs
label.s3.access_key=Access Key
label.s3.bucket=Bucket
label.s3.connection_timeout=Connection Timeout
label.s3.endpoint=Endpoint
label.s3.max_error_retry=Max Error Retry
label.s3.secret_key=Secret Key
label.s3.socket_timeout=Socket Timeout
label.s3.use_https=Use HTTPS
label.saturday=Saturday
label.save.and.continue=Save and continue
label.save=Save
label.saving.processing=Saving....
label.scope=Scope
label.search=Search
label.secondary.storage.count=Secondary Storage Pools
label.secondary.storage.limits=Secondary Storage limits (GiB)
label.secondary.storage.vm=Secondary storage VM
label.secondary.storage=Secondary Storage
label.secondary.used=Secondary Storage Used
label.secret.key=Secret Key
label.security.group.name=Security Group Name
label.security.group=Security Group
label.security.groups.enabled=Security Groups Enabled
label.security.groups=Security Groups
label.select-view=Select view
label.select.a.template=Select a template
label.select.a.zone=Select a zone
label.select.instance.to.attach.volume.to=Select instance to attach volume to
label.select.instance=Select instance
label.select.iso.or.template=Select ISO or template
label.select.offering=Select offering
label.select.project=Select Project
label.select.tier=Select Tier
label.select.vm.for.static.nat=Select VM for static NAT
label.select=Select
label.sent=Sent
label.server=Server
label.service.capabilities=Service Capabilities
label.service.offering=Service Offering
label.session.expired=Session Expired
label.set.up.zone.type=Set up zone type
label.setup.network=Set up Network
label.setup.zone=Set up Zone
label.setup=Setup
label.shared=Shared
label.SharedMountPoint=SharedMountPoint
label.show.ingress.rule=Show Ingress Rule
label.shutdown.provider=Shutdown provider
label.site.to.site.VPN=Site-to-site VPN
label.size=Size
label.skip.guide=I have used CloudStack before, skip this guide
label.snapshot.limits=Snapshot Limits
label.snapshot.name=Snapshot Name
label.snapshot.s=Snapshots
label.snapshot.schedule=Set up Recurring Snapshot
label.snapshot=Snapshot
label.snapshots=Snapshots
label.source.nat=Source NAT
label.specify.IP.ranges=Specify IP ranges
label.specify.vlan=Specify VLAN
label.specify.vxlan=Specify VXLAN
label.SR.name=SR Name-Label
label.srx=SRX
label.ssh.key.pair=SSH Key Pair
label.ssh.key.pair.details=SSH Key Pair Details
label.PA=Palo Alto
label.start.IP=Start IP
label.start.port=Start Port
label.start.reserved.system.IP=Start Reserved system IP
label.start.vlan=Start VLAN
label.start.vxlan=Start VXLAN
label.state=State
label.static.nat.enabled=Static NAT Enabled
label.static.nat.to=Static NAT to
label.static.nat.vm.details=Static NAT VM Details
label.static.nat=Static NAT
label.statistics=Statistics
label.status=Status
label.step.1.title=Step 1\: <strong>Select a Template</strong>
label.step.1=Step 1
label.step.2.title=Step 2\: <strong>Service Offering</strong>
label.step.2=Step 2
label.step.3.title=Step 3\: <strong id\="step3_label">Select a Disk Offering</strong>
label.step.3=Step 3
label.step.4.title=Step 4\: <strong>Network</strong>
label.step.4=Step 4
label.step.5.title=Step 5\: <strong>Review</strong>
label.step.5=Step 5
label.stickiness=Stickiness
label.sticky.cookie-name=Cookie name
label.sticky.domain=Domain
label.sticky.expire=Expires
label.sticky.holdtime=Hold time
label.sticky.indirect=Indirect
label.sticky.length=Length
label.sticky.mode=Mode
label.sticky.nocache=No cache
label.sticky.postonly=Post only
label.sticky.prefix=Prefix
label.sticky.request-learn=Request learn
label.sticky.tablesize=Table size
label.stop=Stop
label.stopped.vms=Stopped VMs
label.storage.tags=Storage Tags
label.storage.traffic=Storage Traffic
label.storage.type=Storage Type
label.qos.type=QoS Type
label.cache.mode=Write-cache Type
label.storage=Storage
label.subdomain.access=Subdomain Access
label.submit=Submit
label.submitted.by=[Submitted by\: <span id\="submitted_by"></span>]
label.succeeded=Succeeded
label.sunday=Sunday
label.super.cidr.for.guest.networks=Super CIDR for Guest Networks
label.supported.services=Supported Services
label.supported.source.NAT.type=Supported Source NAT type
label.suspend.project=Suspend Project
label.system.capacity=System Capacity
label.system.offering=System Offering
label.system.service.offering=System Service Offering
label.system.vm.type=System VM Type
label.system.vm=System VM
label.system.vms=System VMs
label.system.wide.capacity=System-wide capacity
label.tagged=Tagged
label.tags=Tags
label.target.iqn=Target IQN
label.task.completed=Task completed
label.template.limits=Template Limits
label.template=Template
label.TFTP.dir=TFTP Directory
label.theme.default=Default Theme
label.theme.grey=Custom - Grey
label.theme.lightblue=Custom - Light Blue
label.thursday=Thursday
label.tier.details=Tier details
label.tier=Tier
label.time.zone=Timezone
label.time=Time
label.timeout.in.second = Timeout (seconds)
label.timeout=Timeout
label.timezone=Timezone
label.token=Token
label.total.CPU=Total CPU
label.total.cpu=Total CPU
label.total.hosts=Total Hosts
label.total.memory=Total Memory
label.total.of.ip=Total of IP Addresses
label.total.of.vm=Total of VMs
label.total.storage=Total Storage
label.total.vms=Total VMs
label.traffic.label=Traffic label
label.traffic.type=Traffic Type
label.traffic.types=Traffic Types
label.tuesday=Tuesday
label.type.id=Type ID
label.type=Type
label.unavailable=Unavailable
label.unlimited=Unlimited
label.untagged=Untagged
label.update.project.resources=Update project resources
label.update.ssl.cert= SSL Certificate
label.update.ssl= SSL Certificate
label.updating=Updating
label.upload.from.local=Upload from Local
label.upload.template.from.local=Upload Template from Local
label.upload.volume=Upload volume
label.upload.volume.from.local=Upload Volume from Local
label.upload.volume.from.url=Upload volume from URL
label.upload=Upload
label.url=URL
label.usage.interface=Usage Interface
label.use.vm.ip=Use VM IP\:
label.used=Used
label.user=User
label.username=Username
label.users=Users
label.value=Value
label.vcdcname=vCenter DC name
label.vcenter.cluster=vCenter Cluster
label.vcenter.datacenter=vCenter Datacenter
label.vcenter.datastore=vCenter Datastore
label.vcenter.host=vCenter Host
label.vcenter.password=vCenter Password
label.vcenter.username=vCenter Username
label.vcipaddress=vCenter IP Address
label.version=Version
label.view.all=View all
label.view.console=View console
label.view.more=View more
label.view=View
label.viewing=Viewing
label.virtual.appliance=Virtual Appliance
label.virtual.appliances=Virtual Appliances
label.virtual.machines=Virtual Machines
label.virtual.machine=Virtual Machine
label.virtual.network=Virtual Network
label.virtual.router=Virtual Router
label.virtual.routers=Virtual Routers
label.vlan.id=VLAN/VNI ID
label.vlan.range=VLAN/VNI Range
label.vlan=VLAN/VNI
label.vnet=VLAN/VNI
label.vnet.id=VLAN/VNI ID
label.vxlan.id=VXLAN ID
label.vxlan.range=VXLAN Range
label.vxlan=VXLAN
label.vm.add=Add Instance
label.vm.destroy=Destroy
label.vm.display.name=VM display name
label.vm.name=VM name
label.vm.reboot=Reboot
label.vm.start=Start
label.vm.state=VM state
label.vm.stop=Stop
label.VMFS.datastore=VMFS datastore
label.vmfs=VMFS
label.VMs.in.tier=VMs in tier
label.vms=VMs
label.vmsnapshot.current=isCurrent
label.vmsnapshot.memory=Snapshot memory
label.vmsnapshot.parentname=Parent
label.vmsnapshot.type=Type
label.vmsnapshot=VM Snapshots
label.vmware.traffic.label=VMware traffic label
label.volgroup=Volume Group
label.volume.limits=Volume Limits
label.volume.name=Volume Name
label.volume=Volume
label.volumes=Volumes
label.vpc.id=VPC ID
label.VPC.router.details=VPC router details
label.vpc=VPC
label.VPN.connection=VPN Connection
label.VPN.customer.gateway=VPN Customer Gateway
label.vpn.customer.gateway=VPN Customer Gateway
label.VPN.gateway=VPN Gateway
label.vpn=VPN
label.vsmctrlvlanid=Control VLAN ID
label.vsmpktvlanid=Packet VLAN ID
label.vsmstoragevlanid=Storage VLAN ID
label.vsphere.managed=vSphere Managed
label.waiting=Waiting
label.warn=Warn
label.warning=Warning
label.wednesday=Wednesday
label.weekly=Weekly
label.welcome.cloud.console=Welcome to Management Console
label.welcome=Welcome
label.what.is.cloudstack=What is CloudStack&\#8482?
label.xenserver.traffic.label=XenServer traffic label
label.yes=Yes
label.zone.details=Zone details
label.zone.id=Zone ID
label.zone.step.1.title=Step 1\: <strong>Select a Network</strong>
label.zone.step.2.title=Step 2\: <strong>Add a Zone</strong>
label.zone.step.3.title=Step 3\: <strong>Add a Pod</strong>
label.zone.step.4.title=Step 4\: <strong>Add an IP range</strong>
label.zone.type=Zone Type
label.zone.wide=Zone-Wide
label.zone=Zone
label.zones=Zones
label.zoneWizard.trafficType.guest=Guest\: Traffic between end-user virtual machines
label.zoneWizard.trafficType.management=Management\: Traffic between CloudStack\\\\'s internal resources, including any components that communicate with the Management Server, such as hosts and CloudStack system VMs
label.zoneWizard.trafficType.public=Public\: Traffic between the internet and virtual machines in the cloud.
label.zoneWizard.trafficType.storage=Storage\: Traffic between primary and secondary storage servers, such as VM templates and snapshots
label.ldap.group.name=LDAP Group
label.password.reset.confirm=Password has been reset to 
label.provider=Provider
label.resetVM=Reset VM
label.openDaylight=OpenDaylight
label.assign.instance.another=Assign Instance to Another Account
label.network.addVM=Add network to VM
label.set.default.NIC=Set default NIC
label.Xenserver.Tools.Version61plus=Original XS Version is 6.1\+
label.supportsstrechedl2subnet=Supports Streched L2 Subnet
label.menu.vpc.offerings=VPC Offerings
label.vpc.offering=VPC Offering
label.regionlevelvpc=Region Level VPC
label.add.vpc.offering=Add VPC Offering
label.distributedrouter=Distributed Router
label.vpc.offering.details=VPC offering details
label.disable.vpc.offering=Disable VPC offering
label.enable.vpc.offering=Enable VPC offering
label.remove.vpc.offering=Remove VPC offering
label.vpc.distributedvpcrouter=Distributed VPC Router
label.vpc.supportsregionlevelvpc=Supports Region Level VPC
label.dynamically.scalable=Dynamically Scalable
label.instance.scaled.up=Instance scaled to the requested offering
label.tag.key=Tag Key
label.tag.value=Tag Value
label.ipv6.address=IPv6 IP Address
label.ipv6.gateway=IPv6 Gateway
label.ipv6.CIDR=IPv6 CIDR
label.VPC.limits=VPC limits
label.edit.region=Edit Region
label.gslb.domain.name=GSLB Domain Name
label.add.gslb=Add GSLB
label.gslb.servicetype=Service Type
label.gslb.details=GSLB details
label.gslb.delete=Delete GSLB
label.opendaylight.controller=OpenDaylight Controller
label.opendaylight.controllers=OpenDaylight Controllers
label.portable.ip.ranges=Portable IP Ranges
label.add.portable.ip.range=Add Portable IP Range
label.delete.portable.ip.range=Delete Portable IP Range
label.opendaylight.controllerdetail=OpenDaylight Controller Details
label.portable.ip.range.details=Portable IP Range details
label.portable.ips=Portable IPs
label.gslb.assigned.lb=Assigned load balancing
label.gslb.assigned.lb.more=Assign more load balancing
label.gslb.lb.rule=Load balancing rule
label.gslb.lb.details=Load balancing details
label.gslb.lb.remove=Remove load balancing from this GSLB
label.enable.autoscale=Enable Autoscale
label.disable.autoscale=Disable Autoscale
label.min.instances=Min Instances
label.max.instances=Max Instances
label.add.OpenDaylight.device=Add OpenDaylight Controller
label.show.advanced.settings=Show advanced settings
label.delete.OpenDaylight.device=Delete OpenDaylight Controller
label.polling.interval.sec=Polling Interval (in sec)
label.quiet.time.sec=Quiet Time (in sec)
label.usage.type=Usage Type
label.usage.unit=Unit
label.quota.value=Quota Value
label.quota.description=Quota Description
label.quota.configuration=Quota Configuration
label.quota.configure=Configure Quota
label.quota.remove=Remove Quota
label.quota.totalusage=Total Usage
label.quota.balance=Balance
label.quota.minbalance=Min Balance
label.quota.enforcequota=Enforce Quota
label.quota.summary=Summary
label.quota.fullsummary=All Accounts
label.quota.tariff=Tariff
label.quota.state=State
label.quota.startdate=Start Date
label.quota.enddate=End Date
label.quota.total=Total
label.quota.startquota=Start Quota
label.quota.endquota=End Quota
label.quota.type.name=Usage Type
label.quota.type.unit=Usage Unit
label.quota.usage=Quota Consumption
label.quota.add.credits=Add Credits
label.quota.email.template=Email Template
label.quota.statement=Statement
label.quota.statement.balance=Quota Balance
label.quota.statement.quota=Quota Usage
label.quota.statement.tariff=Quota Tariff
label.quota.tariff.value=Tariff Value
label.quota.tariff.edit=Edit Tariff
label.quota.tariff.effectivedate=Effective Date
label.quota.date=Date
label.quota.dates=Update Dates
label.quota.credit=Credit
label.quota.credits=Credits
label.quota.value=Quota Value
label.quota.statement.bydates=Statement
label.quota.email.subject=Subject
label.quota.email.body=Body
label.quota.email.lastupdated=Last Update
label.destroy.vm.graceperiod=Destroy VM Grace Period
label.SNMP.community=SNMP Community
label.SNMP.port=SNMP Port
label.add.ucs.manager=Add UCS Manager
label.ovm.traffic.label=OVM traffic label
label.lxc.traffic.label=LXC Traffic Label
label.hyperv.traffic.label=HyperV Traffic Label
label.resource.name=Resource Name
label.reource.id=Resource ID
label.vnmc.devices=VNMC Devices
label.add.vnmc.provider=Add VNMC provider
label.enable.vnmc.provider=Enable VNMC provider
label.add.vnmc.device=Add VNMC device
label.ciscovnmc.resource.details=CiscoVNMC resource details
label.delete.ciscovnmc.resource=Delete CiscoVNMC resource
label.enable.vnmc.device=Enable VNMC device
label.disbale.vnmc.device=Disable VNMC device
label.disable.vnmc.provider=Disable VNMC provider
label.services=Services
label.secondary.staging.store=Secondary Staging Store
label.release.account=Release from Account
label.release.account.lowercase=Release from account
label.vlan.vni.ranges=VLAN/VNI Range(s)
label.dedicated.vlan.vni.ranges=Dedicated VLAN/VNI Ranges
label.dedicate.vlan.vni.range=Dedicate VLAN/VNI Range
label.vlan.vni.range=VLAN/VNI Range
label.vlan.range.details=VLAN Range details
label.release.dedicated.vlan.range=Release dedicated VLAN range
label.broadcat.uri=Broadcast URI
label.ipv4.cidr=IPv4 CIDR
label.guest.network.details=Guest network details
label.ipv4.gateway=IPv4 Gateway
label.release.dedicated.vlan.range=Release dedicated VLAN range
label.vlan.ranges=VLAN Range(s)
label.virtual.appliance.details=Virtual applicance details
label.start.lb.vm=Start LB VM
label.stop.lb.vm=Stop LB VM
label.migrate.lb.vm=Migrate LB VM
label.vpc.virtual.router=VPC Virtual Router
label.ovs=OVS
label.gslb.service=GSLB service
label.gslb.service.public.ip=GSLB service Public IP
label.gslb.service.private.ip=GSLB service Private IP
label.baremetal.dhcp.provider=Baremetal DHCP Provider
label.add.baremetal.dhcp.device=Add Baremetal DHCP Device
label.baremetal.pxe.provider=Baremetal PXE Provider
label.baremetal.pxe.device=Add Baremetal PXE Device
label.tftp.root.directory=Tftp root directory
label.add.vmware.datacenter=Add VMware datacenter
label.remove.vmware.datacenter=Remove VMware datacenter
label.dc.name=DC Name
label.vcenter=vcenter
label.dedicate.zone=Dedicate Zone
label.zone.dedicated=Zone Dedicated
label.release.dedicated.zone=Release Dedicated Zone
label.ipv6.dns1=IPv6 DNS1
label.ipv6.dns2=IPv6 DNS2
label.vmware.datacenter.name=VMware datacenter Name
label.vmware.datacenter.vcenter=VMware datacenter vcenter
label.vmware.datacenter.id=VMware datacenter ID
label.system.vm.details=System VM details
label.system.vm.scaled.up=System VM Scaled Up
label.console.proxy.vm=Console Proxy VM
label.settings=Settings
label.requires.upgrade=Requires Upgrade
label.upgrade.router.newer.template=Upgrade Router to Use Newer Template
label.router.vm.scaled.up=Router VM Scaled Up
label.total.virtual.routers=Total of Virtual Routers
label.upgrade.required=Upgrade is required
label.virtual.routers.group.zone=Virtual Routers group by zone
label.total.virtual.routers.upgrade=Total of Virtual Routers that require upgrade
label.virtual.routers.group.pod=Virtual Routers group by pod
label.virtual.routers.group.cluster=Virtual Routers group by cluster
label.zone.lower=zone
label.virtual.routers.group.account=Virtual Routers group by account
label.netscaler.details=NetScaler details
label.baremetal.dhcp.devices=Baremetal DHCP Devices
label.baremetal.pxe.devices=Baremetal PXE Devices
label.addes.new.f5=Added new F5
label.f5.details=F5 details
label.srx.details=SRX details
label.palo.alto.details=Palo Alto details
label.added.nicira.nvp.controller=Added new Nicira NVP Controller
label.nicira.nvp.details=Nicira NVP details
label.added.brocade.vcs.switch=Added new Brocade Vcs Switch
label.brocade.vcs.details=Brocade Vcs Switch details
label.added.new.bigswitch.bcf.controller=Added new BigSwitch BCF Controller
label.bigswitch.bcf.details=BigSwitch BCF details
label.bigswitch.bcf.nat=BigSwitch BCF NAT Enabled
label.dedicate=Dedicate
label.dedicate.pod=Dedicate Pod
label.pod.dedicated=Pod Dedicated
label.release.dedicated.pod=Release Dedicated Pod
label.override.public.traffic=Override Public-Traffic
label.public.traffic.vswitch.type=Public Traffic vSwitch Type
label.public.traffic.vswitch.name=Public Traffic vSwitch Name
label.override.guest.traffic=Override Guest-Traffic
label.guest.traffic.vswitch.type=Guest Traffic vSwitch Type
label.guest.traffic.vswitch.name=Guest Traffic vSwitch Name
label.cisco.nexus1000v.ip.address=Nexus 1000v IP Address
label.cisco.nexus1000v.username=Nexus 1000v Username
label.cisco.nexus1000v.password=Nexus 1000v Password
label.dedicate.cluster=Dedicate Cluster
label.release.dedicated.cluster=Release Dedicated Cluster
label.dedicate.host=Dedicate Host
label.release.dedicated.host=Release Dedicated Host
label.number.of.cpu.sockets=The Number of CPU Sockets
label.delete.ucs.manager=Delete UCS Manager
label.blades=Blades
label.chassis=Chassis
label.blade.id=Blade ID
label.associated.profile=Associated Profile
label.refresh.blades=Refresh Blades
label.instanciate.template.associate.profile.blade=Instanciate Template and Associate Profile to Blade
label.select.template=Select Template
label.profile=Profile
label.delete.profile=Delete Profile
label.disassociate.profile.blade=Disassociate Profile from Blade
label.secondary.storage.details=Secondary storage details
label.secondary.staging.store.details=Secondary Staging Store details
label.add.nfs.secondary.staging.store=Add NFS Secondary Staging Store
label.delete.secondary.staging.store=Delete Secondary Staging Store
label.ipv4.start.ip=IPv4 Start IP
label.ipv4.end.ip=IPv4 End IP
label.ipv6.start.ip=IPv6 Start IP
label.ipv6.end.ip=IPv6 End IP
label.vm.password=Password of the VM is
label.group.by.zone=Group by zone
label.group.by.pod=Group by pod
label.group.by.cluster=Group by cluster
label.group.by.account=Group by account
label.no.grouping=(no grouping)
label.create.nfs.secondary.staging.storage=Create NFS Secondary Staging Store
label.username.lower=username
label.password.lower=password
label.email.lower=email
label.firstname.lower=firstname
label.lastname.lower=lastname
label.domain.lower=domain
label.account.lower=account
label.type.lower=type
label.rule.number=Rule Number
label.action=Action
label.name.lower=name
label.ucs=UCS
label.change.affinity=Change Affinity
label.persistent=Persistent 
label.broadcasturi=broadcasturi
label.network.cidr=Network CIDR
label.reserved.ip.range=Reserved IP Range
label.autoscale=AutoScale
label.health.check=Health Check
label.public.load.balancer.provider=Public Load Balancer Provider
label.add.isolated.network=Add Isolated Network
label.add.isolated.guest.network=Add Isolated Guest Network
label.vlan.only=VLAN
label.secondary.isolated.vlan.id=Secondary Isolated VLAN ID
label.ipv4.netmask=IPv4 Netmask
label.custom=Custom
label.disable.network.offering=Disable network offering
label.enable.network.offering=Enable network offering
label.remove.network.offering=Remove network offering
label.system.offering.for.router=System Offering for Router
label.mode=Mode
label.associate.public.ip=Associate Public IP
label.acl=ACL
label.user.data=User Data
label.virtual.networking=Virtual Networking
label.allow=Allow
label.deny=Deny
label.default.egress.policy=Default egress policy
label.xenserver.tools.version.61.plus=Original XS Version is 6.1\+
label.gpu=GPU
label.vgpu.type=vGPU type
label.vgpu.video.ram=Video RAM
label.vgpu.max.resolution=Max resolution
label.vgpu.max.vgpu.per.gpu=vGPUs per GPU
label.vgpu.remaining.capacity=Remaining capacity
label.routing.host=Routing Host
label.usage.server=Usage Server
label.user.vm=User VM
label.resource.limit.exceeded=Resource Limit Exceeded
label.direct.attached.public.ip=Direct Attached Public IP
label.usage.sanity.result=Usage Sanity Result
label.select.region=Select region
label.info.upper=INFO
label.warn.upper=WARN
label.error.upper=ERROR
label.event.deleted=Event Deleted
label.add.ciscoASA1000v=Add CiscoASA1000v Resource
label.delete.ciscoASA1000v=Delete CiscoASA1000v
label.inside.port.profile=Inside Port Profile
label.archive=Archive
label.event.archived=Event Archived
label.alert.details=Alert details
label.alert.deleted=Alert Deleted
label.alert.archived=Alert Archived
label.volume.details=Volume details
label.volume.migrated=Volume migrated
label.storage.pool=Storage Pool
label.enable.host=Enable Host
label.disable.host=Disable Host
label.copying.iso=Copying ISO
label.add.internal.lb=Add Internal LB
label.internal.lb.details=Internal LB details
label.delete.internal.lb=Delete Internal LB
label.remove.vm.load.balancer=Remove VM from load balancer
label.add.acl.list=Add ACL List
label.add.list.name=ACL List Name
label.add.network.acl.list=Add Network ACL List
label.delete.acl.list=Delete ACL List
label.acl.replaced=ACL replaced
label.ipv4.dns1=IPv4 DNS1
label.ipv4.dns2=IPv4 DNS2
label.protocol.number=Protocol Number
label.edit.acl.rule=Edit ACL rule
label.source.ip.address=Source IP Address
label.source.port=Source Port
label.instance.port=Instance Port
label.assigned.vms=Assigned VMs
label.replace.acl=Replace ACL
label.source.nat.supported=SourceNAT Supported
label.acl.name=ACL Name
label.acl.id=ACL ID
label.passive=Passive
label.replace.acl.list=Replace ACL List
label.vswitch.name=vSwitch Name
label.vSwitch.type=vSwitch Type
label.ping.path=Ping Path
label.response.timeout.in.sec=Response Timeout (in sec)
label.health.check.interval.in.sec=Health Check Interval (in sec)
label.healthy.threshold=Healthy Threshold
label.unhealthy.threshold=Unhealthy Threshold
label.other=Other
label.vm.id=VM ID
label.vnmc=VNMC
label.scale.up.policy=SCALE UP POLICY
label.counter=Counter
label.operator=Operator
label.threshold=Threshold
label.load.balancer.type=Load Balancer Type
label.vgpu=VGPU
label.sticky.name=Sticky Name
label.stickiness.method=Stickiness method
label.gslb=GSLB
label.portable.ip=Portable IP
label.internallbvm=InternalLbVm
label.agent.state=Agent State
label.duration.in.sec=Duration (in sec)
managed.state=Managed State
message.acquire.new.ip.vpc=Please confirm that you would like to acquire a new IP for this VPC.
message.acquire.new.ip=Please confirm that you would like to acquire a new IP for this network.
message.acquire.public.ip=Please select a zone from which you want to acquire your new IP from.
message.action.cancel.maintenance.mode=Please confirm that you want to cancel this maintenance.
message.action.cancel.maintenance=Your host has been successfully canceled for maintenance. This process can take up to several minutes.
message.action.change.service.warning.for.instance=Your instance must be stopped before attempting to change its current service offering.
message.action.change.service.warning.for.router=Your router must be stopped before attempting to change its current service offering.
message.action.delete.cluster=Please confirm that you want to delete this cluster.
message.action.delete.disk.offering=Please confirm that you want to delete this disk offering.
message.action.delete.domain=Please confirm that you want to delete this domain.
message.action.delete.external.firewall=Please confirm that you would like to remove this external firewall. Warning\: If you are planning to add back the same external firewall, you must reset usage data on the device.
message.action.delete.external.load.balancer=Please confirm that you would like to remove this external load balancer. Warning\: If you are planning to add back the same external load balancer, you must reset usage data on the device.
message.action.delete.ingress.rule=Please confirm that you want to delete this ingress rule.
message.action.delete.ISO.for.all.zones=The ISO is used by all zones. Please confirm that you want to delete it from all zones.
message.action.delete.ISO=Please confirm that you want to delete this ISO.
message.action.delete.network=Please confirm that you want to delete this network.
message.action.delete.nexusVswitch=Please confirm that you want to delete this nexus 1000v
message.action.delete.physical.network=Please confirm that you want to delete this physical network
message.action.delete.pod=Please confirm that you want to delete this pod.
message.action.delete.primary.storage=Please confirm that you want to delete this primary storage.
message.action.delete.secondary.storage=Please confirm that you want to delete this secondary storage.
message.action.delete.security.group=Please confirm that you want to delete this security group.
message.action.delete.service.offering=Please confirm that you want to delete this service offering.
message.action.delete.snapshot=Please confirm that you want to delete this snapshot.
message.action.delete.system.service.offering=Please confirm that you want to delete this system service offering.
message.action.delete.template.for.all.zones=The template is used by all zones. Please confirm that you want to delete it from all zones.
message.action.delete.template=Please confirm that you want to delete this template.
message.action.delete.volume=Please confirm that you want to delete this volume.
message.action.delete.zone=Please confirm that you want to delete this zone.
message.action.destroy.instance=Please confirm that you want to destroy this instance.
message.action.destroy.systemvm=Please confirm that you want to destroy this System VM.
message.action.disable.cluster=Please confirm that you want to disable this cluster.
message.action.disable.nexusVswitch=Please confirm that you want to disable this nexus 1000v
message.action.disable.physical.network=Please confirm that you want to disable this physical network.
message.action.disable.pod=Please confirm that you want to disable this pod.
message.action.disable.static.NAT=Please confirm that you want to disable static NAT.
message.action.disable.zone=Please confirm that you want to disable this zone.
message.action.download.iso=Please confirm that you want to download this ISO.
message.action.download.template=Please confirm that you want to download this template.
message.action.enable.cluster=Please confirm that you want to enable this cluster.
message.action.enable.maintenance=Your host has been successfully prepared for maintenance.  This process can take up to several minutes or longer depending on how many VMs are currently on this host.
message.action.enable.nexusVswitch=Please confirm that you want to enable this nexus 1000v
message.action.enable.physical.network=Please confirm that you want to enable this physical network.
message.action.enable.pod=Please confirm that you want to enable this pod.
message.action.enable.zone=Please confirm that you want to enable this zone.
message.action.expunge.instance=Please confirm that you want to expunge this instance.
message.action.force.reconnect=Your host has been successfully forced to reconnect.  This process can take up to several minutes.
message.action.host.enable.maintenance.mode=Enabling maintenance mode will cause a live migration of all running instances on this host to any available host.
message.action.instance.reset.password=Please confirm that you want to change the ROOT password for this virtual machine.
message.action.manage.cluster=Please confirm that you want to manage the cluster.
message.action.primarystorage.enable.maintenance.mode=Warning\: placing the primary storage into maintenance mode will cause all VMs using volumes from it to be stopped.  Do you want to continue?
message.action.reboot.instance=Please confirm that you want to reboot this instance.
message.action.reboot.router=All services provided by this virtual router will be interrupted. Please confirm that you want to reboot this router.
message.action.reboot.systemvm=Please confirm that you want to reboot this system VM.
message.action.release.ip=Please confirm that you want to release this IP.
message.action.remove.host=Please confirm that you want to remove this host.
message.action.reset.password.off=Your instance currently does not support this feature.
message.action.reset.password.warning=Your instance must be stopped before attempting to change its current password.
message.action.restore.instance=Please confirm that you want to restore this instance.
message.action.start.instance=Please confirm that you want to start this instance.
message.action.start.router=Please confirm that you want to start this router.
message.action.start.systemvm=Please confirm that you want to start this system VM.
message.action.stop.instance=Please confirm that you want to stop this instance.
message.action.stop.router=All services provided by this virtual router will be interrupted. Please confirm that you want to stop this router.
message.action.stop.systemvm=Please confirm that you want to stop this system VM.
message.action.take.snapshot=Please confirm that you want to take a snapshot of this volume.
message.action.revert.snapshot=Please confirm that you want to revert the owning volume to this snapshot.
message.action.unmanage.cluster=Please confirm that you want to unmanage the cluster.
message.action.vmsnapshot.delete=Please confirm that you want to delete this VM snapshot.
message.action.vmsnapshot.revert=Revert VM snapshot
message.activate.project=Are you sure you want to activate this project?
message.add.cluster.zone=Add a hypervisor managed cluster for zone <b><span id\="zone_name"></span></b>
message.add.cluster=Add a hypervisor managed cluster for zone <b><span id\="zone_name"></span></b>, pod <b><span id\="pod_name"></span></b>
message.add.disk.offering=Please specify the following parameters to add a new disk offering
message.add.domain=Please specify the subdomain you want to create under this domain
message.add.firewall=Add a firewall to zone
message.add.guest.network=Please confirm that you would like to add a guest network
message.add.host=Please specify the following parameters to add a new host
message.add.ip.range.direct.network=Add an IP range to direct network <b><span id\="directnetwork_name"></span></b> in zone <b><span id\="zone_name"></span></b>
message.add.ip.range.to.pod=<p>Add an IP range to pod\: <b><span id\="pod_name_label"></span></b></p>
message.add.ip.range=Add an IP range to public network in zone
message.add.load.balancer.under.ip=The load balancer rule has been added under IP\:
message.add.load.balancer=Add a load balancer to zone
message.add.network=Add a new network for zone\: <b><span id\="zone_name"></span></b>
message.add.new.gateway.to.vpc=Please specify the information to add a new gateway to this VPC.
message.add.pod.during.zone.creation=Each zone must contain in one or more pods, and we will add the first pod now. A pod contains hosts and primary storage servers, which you will add in a later step. First, configure a range of reserved IP addresses for CloudStack\'s internal management traffic. The reserved IP range must be unique for each zone in the cloud.
message.add.pod=Add a new pod for zone <b><span id\="add_pod_zone_name"></span></b>
message.add.primary.storage=Add a new Primary Storage for zone <b><span id\="zone_name"></span></b>, pod <b><span id\="pod_name"></span></b>
message.add.primary=Please specify the following parameters to add a new primary storage
message.add.region=Please specify the required information to add a new region.
message.add.secondary.storage=Add a new storage for zone <b><span id\="zone_name"></span></b>
message.add.service.offering=Please fill in the following data to add a new compute offering.
message.add.system.service.offering=Please fill in the following data to add a new system service offering.
message.add.template=Please enter the following data to create your new template
message.add.volume=Please fill in the following data to add a new volume.
message.add.VPN.gateway=Please confirm that you want to add a VPN Gateway
message.adding.host=Adding host
message.adding.Netscaler.device=Adding Netscaler device
message.adding.Netscaler.provider=Adding Netscaler provider
message.additional.networks.desc=Please select additional network(s) that your virtual instance will be connected to.
message.advanced.mode.desc=Choose this network model if you wish to enable VLAN support.  This network model provides the most flexibility in allowing administrators to provide custom network offerings such as providing firewall, vpn, or load balancer support as well as enabling direct vs virtual networking.
message.advanced.security.group=Choose this if you wish to use security groups to provide guest VM isolation.
message.advanced.virtual=Choose this if you wish to use zone-wide VLANs to provide guest VM isolation.
message.after.enable.s3=S3-backed Secondary Storage configured. Note\: When you leave this page, you will not be able to re-configure S3 again.
message.after.enable.swift=Swift configured. Note\: When you leave this page, you will not be able to re-configure Swift again.
message.alert.state.detected=Alert state detected
message.allow.vpn.access=Please enter a username and password of the user that you want to allow VPN access.
message.apply.snapshot.policy=You have successfully updated your current snapshot policy.
message.attach.iso.confirm=Please confirm that you want to attach the ISO to this virtual instance.
message.attach.volume=Please fill in the following data to attach a new volume. If you are attaching a disk volume to a Windows based virtual machine, you will need to reboot the instance to see the attached disk.
message.basic.mode.desc=Choose this network model if you do <b>*<u>not</u>*</b> want to enable any VLAN support.  All virtual instances created under this network model will be assigned an IP directly from the network and security groups are used to provide security and segregation.
message.change.ipaddress=Please confirm that you would like to change the IP address for this NIC on VM.
message.change.offering.confirm=Please confirm that you wish to change the service offering of this virtual instance.
message.change.password=Please change your password.
message.configure.all.traffic.types=You have multiple physical networks; please configure labels for each traffic type by clicking on the Edit button.
message.configuring.guest.traffic=Configuring guest traffic
message.configuring.physical.networks=Configuring physical networks
message.configuring.public.traffic=Configuring public traffic
message.configuring.storage.traffic=Configuring storage traffic
message.confirm.action.force.reconnect=Please confirm that you want to force reconnect this host.
message.confirm.delete.F5=Please confirm that you would like to delete F5
message.confirm.delete.BigSwitchBcf=Please confirm that you would like to delete this BigSwitch BCF Controller
message.confirm.delete.BrocadeVcs=Please confirm that you would like to delete Brocade Vcs Switch
message.confirm.delete.NetScaler=Please confirm that you would like to delete NetScaler
message.confirm.delete.NuageVsp=Please confirm that you would like to delete Nuage Virtualized Services Directory
message.confirm.delete.SRX=Please confirm that you would like to delete SRX
message.confirm.delete.PA=Please confirm that you would like to delete Palo Alto
message.confirm.destroy.router=Please confirm that you would like to destroy this router
message.confirm.disable.provider=Please confirm that you would like to disable this provider
message.confirm.enable.provider=Please confirm that you would like to enable this provider
message.confirm.join.project=Please confirm you wish to join this project.
message.confirm.remove.IP.range=Please confirm that you would like to remove this IP range.
message.confirm.shutdown.provider=Please confirm that you would like to shutdown this provider
message.confirm.current.guest.CIDR.unchanged=Do you want to keep the current guest network CIDR unchanged?
message.confirm.delete.ciscoASA1000v=Please confirm you want to delete CiscoASA1000v
message.confirm.remove.selected.events=Please confirm you would like to remove the selected events
message.confirm.archive.selected.events=Please confirm you would like to archive the selected events
message.confirm.remove.event=Are you sure you want to remove this event?
message.confirm.archive.event=Please confirm that you want to archive this event.
message.confirm.remove.selected.alerts=Please confirm you would like to remove the selected alerts
message.confirm.archive.selected.alerts=Please confirm you would like to archive the selected alerts
message.confirm.delete.alert=Are you sure you want to delete this alert ?
message.confirm.archive.alert=Please confirm that you want to archive this alert.
message.confirm.migrate.volume=Do you want to migrate this volume?
message.confirm.attach.disk=Are you sure you want to attach disk?
message.confirm.create.volume=Are you sure you want to create volume?
message.confirm.enable.host=Please confirm that you want to enable the host
message.confirm.disable.host=Please confirm that you want to disable the host
message.confirm.delete.internal.lb=Please confirm you want to delete Internal LB
message.confirm.remove.load.balancer=Please confirm you want to remove VM from load balancer
message.confirm.delete.acl.list=Are you sure you want to delete this ACL list?
message.confirm.replace.acl.new.one=Do you want to replace the ACL with a new one?
message.copy.iso.confirm=Please confirm that you wish to copy your ISO to
message.copy.template=Copy template <b id\="copy_template_name_text">XXX</b> from zone <b id\="copy_template_source_zone_text"></b> to
message.create.template.vm=Create VM from template <b id\="p_name"></b>
message.create.template.volume=Please specify the following information before creating a template of your disk volume\: <b><span id\="volume_name"></span></b>. Creation of the template can range from several minutes to longer depending on the size of the volume.
message.create.template=Are you sure you want to create template?
message.creating.cluster=Creating cluster
message.creating.guest.network=Creating guest network
message.creating.physical.networks=Creating physical networks
message.creating.pod=Creating pod
message.creating.primary.storage=Creating primary storage
message.creating.secondary.storage=Creating secondary storage
message.creating.zone=Creating zone
message.decline.invitation=Are you sure you want to decline this project invitation?
message.dedicate.zone=Dedicating zone
message.delete.account=Please confirm that you want to delete this account.
message.delete.affinity.group=Please confirm that you would like to remove this affinity group.
message.delete.gateway=Please confirm you want to delete the gateway
message.delete.project=Are you sure you want to delete this project?
message.delete.user=Please confirm that you would like to delete this user.
message.delete.VPN.connection=Please confirm that you want to delete VPN connection
message.delete.VPN.customer.gateway=Please confirm that you want to delete this VPN Customer Gateway
message.delete.VPN.gateway=Please confirm that you want to delete this VPN Gateway
message.desc.advanced.zone=For more sophisticated network topologies. This network model provides the most flexibility in defining guest networks and providing custom network offerings such as firewall, VPN, or load balancer support.
message.desc.basic.zone=Provide a single network where each VM instance is assigned an IP directly from the network. Guest isolation can be provided through layer-3 means such as security groups (IP address source filtering).
message.desc.cluster=Each pod must contain one or more clusters, and we will add the first cluster now. A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Each cluster consists of one or more hosts and one or more primary storage servers.
message.desc.created.ssh.key.pair=Created a SSH Key Pair.
message.desc.host=Each cluster must contain at least one host (computer) for guest VMs to run on, and we will add the first host now. For a host to function in CloudStack, you must install hypervisor software on the host, assign an IP address to the host, and ensure the host is connected to the CloudStack management server.<br/><br/>Give the host\\'s DNS or IP address, the user name (usually root) and password, and any labels you use to categorize hosts.
message.desc.primary.storage=Each cluster must contain one or more primary storage servers, and we will add the first one now. Primary storage contains the disk volumes for all the VMs running on hosts in the cluster. Use any standards-compliant protocol that is supported by the underlying hypervisor.
message.desc.reset.ssh.key.pair=Please specify a ssh key pair that you would like to add to this VM. Please note the root password will be changed by this operation if password is enabled.
message.desc.secondary.storage=Each zone must have at least one NFS or secondary storage server, and we will add the first one now. Secondary storage stores VM templates, ISO images, and VM disk volume snapshots. This server must be available to all hosts in the zone.<br/><br/>Provide the IP address and exported path.
message.desc.zone=A zone is the largest organizational unit in CloudStack, and it typically corresponds to a single datacenter. Zones provide physical isolation and redundancy. A zone consists of one or more pods (each of which contains hosts and primary storage servers) and a secondary storage server which is shared by all pods in the zone.
message.detach.disk=Are you sure you want to detach this disk?
message.detach.iso.confirm=Please confirm that you want to detach the ISO from this virtual instance.
message.disable.account=Please confirm that you want to disable this account.  By disabling the account, all users for this account will no longer have access to their cloud resources.  All running virtual machines will be immediately shut down.
message.disable.snapshot.policy=You have successfully disabled your current snapshot policy.
message.disable.user=Please confirm that you would like to disable this user.
message.disable.vpn.access=Please confirm that you want to disable Remote Access VPN.
message.disable.vpn=Are you sure you want to disable VPN?
message.download.ISO=Please click <a href\="\#">00000</a> to download ISO
message.download.template=Please click <a href\="\#">00000</a> to download template
message.download.volume.confirm=Please confirm that you want to download this volume.
message.download.volume=Please click <a href\="\#">00000</a> to download volume
message.edit.account=Edit ("-1" indicates no limit to the amount of resources create)
message.edit.confirm=Please confirm your changes before clicking "Save".
message.edit.limits=Please specify limits to the following resources.  A "-1" indicates no limit to the amount of resources create.
message.edit.traffic.type=Please specify the traffic label you want associated with this traffic type.
message.enable.account=Please confirm that you want to enable this account.
message.enable.user=Please confirm that you would like to enable this user.
message.enable.vpn.access=VPN is currently disabled for this IP Address.  Would you like to enable VPN access?
message.enable.vpn=Please confirm that you want Remote Access VPN enabled for this IP address.
message.enabled.vpn.ip.sec=Your IPSec pre-shared key is
message.enabled.vpn=Your Remote Access VPN is currently enabled and can be accessed via the IP
message.enabling.security.group.provider=Enabling Security Group provider
message.enabling.zone=Enabling zone
message.enter.token=Please enter the token that you were given in your invite e-mail.
message.generate.keys=Please confirm that you would like to generate new keys for this user.
message.guest.traffic.in.advanced.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of VLAN IDs to carry guest traffic for each physical network.
message.guest.traffic.in.basic.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of IP addresses that CloudStack can assign to guest VMs. Make sure this range does not overlap the reserved system IP range.
message.installWizard.click.retry=Click the button to retry launch.
message.installWizard.copy.whatIsACluster=A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Virtual machine instances (VMs) can be live-migrated from one host to another within the same cluster, without interrupting service to the user. A cluster is the third-largest organizational unit within a CloudStack&\#8482; deployment. Clusters are contained within pods, and pods are contained within zones.<br/><br/>CloudStack&\#8482; allows multiple clusters in a cloud deployment, but for a Basic Installation, we only need one cluster.
message.installWizard.copy.whatIsAHost=A host is a single computer. Hosts provide the computing resources that run the guest virtual machines. Each host has hypervisor software installed on it to manage the guest VMs (except for bare metal hosts, which are a special case discussed in the Advanced Installation Guide). For example, a Linux KVM-enabled server, a Citrix XenServer server, and an ESXi server are hosts. In a Basic Installation, we use a single host running XenServer or KVM.<br/><br/>The host is the smallest organizational unit within a CloudStack&\#8482; deployment. Hosts are contained within clusters, clusters are contained within pods, and pods are contained within zones.
message.installWizard.copy.whatIsAPod=A pod often represents a single rack. Hosts in the same pod are in the same subnet.<br/><br/>A pod is the second-largest organizational unit within a CloudStack&\#8482; deployment. Pods are contained within zones. Each zone can contain one or more pods; in the Basic Installation, you will have just one pod in your zone.
message.installWizard.copy.whatIsAZone=A zone is the largest organizational unit within a CloudStack&\#8482; deployment. A zone typically corresponds to a single datacenter, although it is permissible to have multiple zones in a datacenter. The benefit of organizing infrastructure into zones is to provide physical isolation and redundancy. For example, each zone can have its own power supply and network uplink, and the zones can be widely separated geographically (though this is not required).
message.installWizard.copy.whatIsCloudStack=CloudStack&\#8482 is a software platform that pools computing resources to build public, private, and hybrid Infrastructure as a Service (IaaS) clouds. CloudStack&\#8482 manages the network, storage, and compute nodes that make up a cloud infrastructure. Use CloudStack&\#8482 to deploy, manage, and configure cloud computing environments.<br/><br/>Extending beyond individual virtual machine images running on commodity hardware, CloudStack&\#8482 provides a turnkey cloud infrastructure software stack for delivering virtual datacenters as a service - delivering all of the essential components to build, deploy, and manage multi-tier and multi-tenant cloud applications. Both open-source and Premium versions are available, with the open-source version offering nearly identical features.
message.installWizard.copy.whatIsPrimaryStorage=A CloudStack&\#8482; cloud infrastructure makes use of two types of storage\: primary storage and secondary storage. Both of these can be iSCSI or NFS servers, or localdisk.<br/><br/><strong>Primary storage</strong> is associated with a cluster, and it stores the disk volumes of each guest VM for all the VMs running on hosts in that cluster. The primary storage server is typically located close to the hosts.
message.installWizard.copy.whatIsSecondaryStorage=Secondary storage is associated with a zone, and it stores the following\:<ul><li>Templates - OS images that can be used to boot VMs and can include additional configuration information, such as installed applications</li><li>ISO images - OS images that can be bootable or non-bootable</li><li>Disk volume snapshots - saved copies of VM data which can be used for data recovery or to create new templates</ul>
message.installWizard.now.building=Now building your cloud...
message.installWizard.tooltip.addCluster.name=A name for the cluster.  This can be text of your choosing and is not used by CloudStack.
message.installWizard.tooltip.addHost.hostname=The DNS name or IP address of the host.
message.installWizard.tooltip.addHost.password=This is the password for the user named above (from your XenServer install).
message.installWizard.tooltip.addHost.username=Usually root.
message.installWizard.tooltip.addPod.name=A name for the pod
message.installWizard.tooltip.addPod.reservedSystemEndIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers.
message.installWizard.tooltip.addPod.reservedSystemGateway=The gateway for the hosts in that pod.
message.installWizard.tooltip.addPod.reservedSystemNetmask=The netmask in use on the subnet the guests will use.
message.installWizard.tooltip.addPod.reservedSystemStartIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers.
message.installWizard.tooltip.addPrimaryStorage.name=The name for the storage device.
message.installWizard.tooltip.addPrimaryStorage.path=(for NFS) In NFS this is the exported path from the server. Path (for SharedMountPoint).  With KVM this is the path on each host that is where this primary storage is mounted.  For example, "/mnt/primary".
message.installWizard.tooltip.addPrimaryStorage.server=(for NFS, iSCSI, or PreSetup) The IP address or DNS name of the storage device.
message.installWizard.tooltip.addSecondaryStorage.nfsServer=The IP address of the NFS server hosting the secondary storage
message.installWizard.tooltip.addSecondaryStorage.path=The exported path, located on the server you specified above
message.installWizard.tooltip.addZone.dns1=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here.
message.installWizard.tooltip.addZone.dns2=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here.
message.installWizard.tooltip.addZone.internaldns1=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here.
message.installWizard.tooltip.addZone.internaldns2=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here.
message.installWizard.tooltip.addZone.name=A name for the zone
message.installWizard.tooltip.configureGuestTraffic.description=A description for your network
message.installWizard.tooltip.configureGuestTraffic.guestEndIp=The range of IP addresses that will be available for allocation to guests in this zone.  If one NIC is used, these IPs should be in the same CIDR as the pod CIDR.
message.installWizard.tooltip.configureGuestTraffic.guestGateway=The gateway that the guests should use
message.installWizard.tooltip.configureGuestTraffic.guestNetmask=The netmask in use on the subnet that the guests should use
message.installWizard.tooltip.configureGuestTraffic.guestStartIp=The range of IP addresses that will be available for allocation to guests in this zone.  If one NIC is used, these IPs should be in the same CIDR as the pod CIDR.
message.installWizard.tooltip.configureGuestTraffic.name=A name for your network
message.instanceWizard.noTemplates=You do not have any templates available; please add a compatible template, and re-launch the instance wizard.
message.ip.address.changed=Your IP addresses may have changed; would you like to refresh the listing? Note that in this case the details pane will close.
message.iso.desc=Disc image containing data or bootable media for OS
message.join.project=You have now joined a project. Please switch to Project view to see the project.
message.launch.vm.on.private.network=Do you wish to launch your instance on your own private dedicated network?
message.launch.zone=Zone is ready to launch; please proceed to the next step.
message.lock.account=Please confirm that you want to lock this account.  By locking the account, all users for this account will no longer be able to manage their cloud resources.  Existing resources can still be accessed.
message.migrate.instance.confirm=Please confirm the host you wish to migrate the virtual instance to.
message.migrate.instance.to.host=Please confirm that you want to migrate instance to another host.
message.migrate.instance.to.ps=Please confirm that you want to migrate instance to another primary storage.
message.migrate.router.confirm=Please confirm the host you wish to migrate the router to\:
message.migrate.systemvm.confirm=Please confirm the host you wish to migrate the system VM to\:
message.migrate.volume=Please confirm that you want to migrate volume to another primary storage.
message.new.user=Specify the following to add a new user to the account
message.no.network.support.configuration.not.true=You do not have any zone that has security group enabled. Thus, no additional network features.  Please continue to step 5.
message.no.network.support=Your selected hypervisor, vSphere, does not have any additional network features.  Please continue to step 5.
message.no.projects.adminOnly=You do not have any projects.<br/>Please ask your administrator to create a new project.
message.no.projects=You do not have any projects.<br/>Please create a new one from the projects section.
message.number.clusters=<h2><span> \# of </span> Clusters</h2>
message.number.hosts=<h2><span> \# of </span> Hosts</h2>
message.number.pods=<h2><span> \# of </span> Pods</h2>
message.number.storage=<h2><span> \# of </span> Primary Storage Volumes</h2>
message.number.zones=<h2><span> \# of </span> Zones</h2>
message.pending.projects.1=You have pending project invitations\:
message.pending.projects.2=To view, please go to the projects section, then select invitations from the drop-down.
message.please.add.at.lease.one.traffic.range=Please add at least one traffic range.
message.please.proceed=Please proceed to the next step.
message.please.select.a.configuration.for.your.zone=Please select a configuration for your zone.
message.please.select.a.different.public.and.management.network.before.removing=Please select a different public and management network before removing
message.please.select.networks=Please select networks for your virtual machine.
message.please.wait.while.zone.is.being.created=Please wait while your zone is being created; this may take a while...
message.project.invite.sent=Invite sent to user; they will be added to the project once they accept the invitation
message.public.traffic.in.advanced.zone=Public traffic is generated when VMs in the cloud access the internet. Publicly-accessible IPs must be allocated for this purpose. End users can use the CloudStack UI to acquire these IPs to implement NAT between their guest network and their public network.<br/><br/>Provide at least one range of IP addresses for internet traffic.
message.public.traffic.in.basic.zone=Public traffic is generated when VMs in the cloud access the Internet or provide services to clients over the Internet. Publicly accessible IPs must be allocated for this purpose. When a instance is created, an IP from this set of Public IPs will be allocated to the instance in addition to the guest IP address. Static 1-1 NAT will be set up automatically between the public IP and the guest IP. End users can also use the CloudStack UI to acquire additional IPs to implement static NAT between their instances and the public IP.
message.redirecting.region=Redirecting to region...
message.remove.region=Are you sure you want to remove this region from this management server?
message.remove.vpc=Please confirm that you want to remove the VPC
message.remove.vpn.access=Please confirm that you want to remove VPN access from the following user.
message.reset.password.warning.notPasswordEnabled=The template of this instance was created without password enabled
message.reset.password.warning.notStopped=Your instance must be stopped before attempting to change its current password
message.reset.VPN.connection=Please confirm that you want to reset VPN connection
message.restart.mgmt.server=Please restart your management server(s) for your new settings to take effect.
message.restart.mgmt.usage.server=Please restart your management server(s) and usage server(s) for your new settings to take effect.
message.restart.network=All services provided by this network will be interrupted. Please confirm that you want to restart this network.
message.restart.vpc=Please confirm that you want to restart the VPC
message.security.group.usage=(Use <strong>Ctrl-click</strong> to select all applicable security groups)
message.select.a.zone=A zone typically corresponds to a single datacenter. Multiple zones help make the cloud more reliable by providing physical isolation and redundancy.
message.select.instance=Please select an instance.
message.select.iso=Please select an ISO for your new virtual instance.
message.select.item=Please select an item.
message.select.security.groups=Please select security group(s) for your new VM
message.select.template=Please select a template for your new virtual instance.
message.setup.physical.network.during.zone.creation.basic=When adding a basic zone, you can set up one physical network, which corresponds to a NIC on the hypervisor. The network carries several types of traffic.<br/><br/>You may also <strong>drag and drop</strong> other traffic types onto the physical network.
message.setup.physical.network.during.zone.creation=When adding an advanced zone, you need to set up one or more physical networks. Each network corresponds to a NIC on the hypervisor. Each physical network can carry one or more types of traffic, with certain restrictions on how they may be combined.<br/><br/><strong>Drag and drop one or more traffic types</strong> onto each physical network.
message.setup.successful=Cloud setup successful\!
message.snapshot.schedule=You can set up recurring snapshot schedules by selecting from the available options below and applying your policy preference
message.specify.url=Please specify URL
message.step.1.continue=Please select a template or ISO to continue
message.step.1.desc=Please select a template for your new virtual instance. You can also choose to select a blank template from which an ISO image can be installed onto.
message.step.2.continue=Please select a service offering to continue
message.step.3.continue=Please select a disk offering to continue
message.step.4.continue=Please select at least one network to continue
message.step.4.desc=Please select the primary network that your virtual instance will be connected to.
message.storage.traffic=Traffic between CloudStack\\'s internal resources, including any components that communicate with the Management Server, such as hosts and CloudStack system VMs. Please configure storage traffic here.
message.suspend.project=Are you sure you want to suspend this project?
message.template.desc=OS image that can be used to boot VMs
message.tooltip.dns.1=Name of a DNS server for use by VMs in the zone. The public IP addresses for the zone must have a route to this server.
message.tooltip.dns.2=A second DNS server name for use by VMs in the zone. The public IP addresses for the zone must have a route to this server.
message.tooltip.internal.dns.1=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server.
message.tooltip.internal.dns.2=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server.
message.tooltip.network.domain=A DNS suffix that will create a custom domain name for the network that is accessed by guest VMs.
message.tooltip.pod.name=A name for this pod.
message.tooltip.reserved.system.gateway=The gateway for the hosts in the pod.
message.tooltip.reserved.system.netmask=The network prefix that defines the pod subnet. Uses CIDR notation.
message.tooltip.zone.name=A name for the zone.
message.update.os.preference=Please choose a OS preference for this host.  All virtual instances with similar preferences will be first allocated to this host before choosing another.
message.update.resource.count=Please confirm that you want to update resource counts for this account.
message.update.ssl=Please submit a new X.509 compliant SSL certificate chain to be updated to each console proxy and secondary storage virtual instance\:
message.update.ssl.succeeded=Update SSL Certificates succeeded
message.update.ssl.failed=Failed to update SSL Certificate.
message.validate.instance.name=Instance name can not be longer than 63 characters. Only ASCII letters a~z, A~Z, digits 0~9, hyphen are allowed. Must start with a letter and end with a letter or a digit.
message.virtual.network.desc=A dedicated virtualized network for your account.  The broadcast domain is contained within a VLAN and all public network access is routed out by a virtual router.
message.vm.create.template.confirm=Create Template will reboot the VM automatically.
message.vm.review.launch=Please review the following information and confirm that your virtual instance is correct before launch.
message.volume.create.template.confirm=Please confirm that you wish to create a template for this disk volume.  Creation of the template can range from several minutes to longer depending on the size of the volume.
message.you.must.have.at.least.one.physical.network=You must have at least one physical network
message.zone.creation.complete.would.you.like.to.enable.this.zone=Zone creation complete. Would you like to enable this zone?
message.Zone.creation.complete=Zone creation complete
message.zone.no.network.selection=The zone you selected does not have any choices for network selection.
message.zone.step.1.desc=Please select a network model for your zone.
message.zone.step.2.desc=Please enter the following info to add a new zone
message.zone.step.3.desc=Please enter the following info to add a new pod
message.zoneWizard.enable.local.storage=WARNING\: If you enable local storage for this zone, you must do the following, depending on where you would like your system VMs to launch\:<br/><br/>1. If system VMs need to be launched in shared primary storage, shared primary storage needs to be added to the zone after creation. You must also start the zone in a disabled state.<br/><br/>2. If system VMs need to be launched in local primary storage, system.vm.use.local.storage needs to be set to true before you enable the zone.<br/><br/><br/>Would you like to continue?
message.validate.fieldrequired=This field is required.
message.validate.fixfield=Please fix this field.
message.validate.email.address=Please enter a valid email address.
message.validate.URL=Please enter a valid URL.
message.validate.date=Please enter a valid date.
message.validate.date.ISO=Please enter a valid date (ISO).
message.validate.number=Please enter a valid number.
message.validate.digits=Please enter only digits.
message.validate.creditcard=Please enter a valid credit card number.
message.validate.equalto=Please enter the same value again.
message.validate.accept=Please enter a value with a valid extension.
message.validate.maxlength=Please enter no more than {0} characters.
message.validate.minlength=Please enter at least {0} characters.
message.validate.range.length=Please enter a value between {0} and {1} characters long.
message.validate.range=Please enter a value between {0} and {1}.
message.validate.max=Please enter a value less than or equal to {0}.
messgae.validate.min=Please enter a value greater than or equal to {0}.
message.creating.systemVM=Creating system VMs (this may take a while)
message.enabling.zone.dots=Enabling zone...
message.restoreVM=Do you want to restore the VM ?
message.no.host.available=No Hosts are available for Migration
message.network.addVM.desc=Please specify the network that you would like to add this VM to. A new NIC will be added for this network.
message.network.addVMNIC=Please confirm that you would like to add a new VM NIC for this network.
message.set.default.NIC=Please confirm that you would like to make this NIC the default for this VM.
message.set.default.NIC.manual=Please manually update the default NIC on the VM now.
message.instance.scaled.up.confirm=Do you really want to scale Up your instance ?
message.copy.template.confirm=Are you sure you want to copy template?
message.template.copying=Template is being copied.
message.XSTools61plus.update.failed=Failed to update Original XS Version is 6.1\+ field. Error\:
message.gslb.delete.confirm=Please confirm you want to delete this GSLB
message.portable.ip.delete.confirm=Please confirm you want to delete Portable IP Range
message.gslb.lb.remove.confirm=Please confirm you want to remove load balancing from GSLB
message.admin.guide.read=For VMware-based VMs, please read the dynamic scaling section in the admin guide before scaling. Would you like to continue?\,
message.tier.required=Tier is required
message.remove.ldap=Are you sure you want to delete the LDAP configuration?
message.action.downloading.template=Downloading template.
message.configure.ldap=Please confirm you would like to configure LDAP.
message.confirm.delete.ciscovnmc.resource=Please confirm you want to delete CiscoVNMC resource
message.confirm.add.vnmc.provider=Please confirm you would like to add the VNMC provider.
message.confirm.enable.vnmc.provider=Please confirm you would like to enable the VNMC provider.
message.confirm.disable.vnmc.provider=Please confirm you would like to disable the VNMC provider.
message.vnmc.available.list=VNMC is not available from provider list.
message.vnmc.not.available.list=VNMC is not available from provider list.
message.confirm.release.dedicate.vlan.range=Please confirm you want to release dedicated VLAN range
message.confirm.start.lb.vm=Please confirm you want to start LB VM
message.confirm.stop.lb.vm=Please confirm you want to stop LB VM
message.confirm.remove.vmware.datacenter=Please confirm you want to remove VMware datacenter
message.confirm.dedicate.zone=Do you really want to dedicate this zone to a domain/account?
message.confirm.release.dedicated.zone=Do you want to release this dedicated zone ? 
message.dedicated.zone.released=Zone dedication released
message.read.admin.guide.scaling.up=Please read the dynamic scaling section in the admin guide before scaling up.
message.confirm.scale.up.system.vm=Do you really want to scale up the system VM ?
message.confirm.upgrade.router.newer.template=Please confirm that you want to upgrade router to use newer template
message.confirm.scale.up.router.vm=Do you really want to scale up the Router VM ?
message.confirm.upgrade.routers.newtemplate=Please confirm that you want to upgrade all routers in this zone to use newer template
message.confirm.upgrade.routers.pod.newtemplate=Please confirm that you want to upgrade all routers in this pod to use newer template
message.confirm.upgrade.routers.cluster.newtemplate=Please confirm that you want to upgrade all routers in this cluster to use newer template
message.confirm.upgrade.routers.account.newtemplate=Please confirm that you want to upgrade all routers in this account to use newer template
message.confirm.dedicate.pod.domain.account=Do you really want to dedicate this pod to a domain/account? 
message.confirm.release.dedicated.pod=Do you want to release this dedicated pod ?
message.pod.dedication.released=Pod dedication released
message.confirm.dedicate.cluster.domain.account=Do you really want to dedicate this cluster to a domain/account? 
message.cluster.dedicated=Cluster Dedicated
message.confirm.release.dedicated.cluster=Do you want to release this dedicated cluster ?
message.cluster.dedication.released=Cluster dedication released
message.confirm.dedicate.host.domain.account=Do you really want to dedicate this host to a domain/account? 
message.host.dedicated=Host Dedicated
message.confirm.release.dedicated.host=Do you want to release this dedicated host ?
message.host.dedication.released=Host dedication released
message.confirm.delete.ucs.manager=Please confirm that you want to delete UCS Manager
message.confirm.refresh.blades=Please confirm that you want to refresh blades.
message.confirm.delete.secondary.staging.store=Please confirm you want to delete Secondary Staging Store.
message.select.tier=Please select a tier
message.disallowed.characters=Disallowed characters: \<\,\>
message.waiting.for.builtin.templates.to.load=Waiting for builtin templates to load...
message.systems.vms.ready=System VMs ready.
message.your.cloudstack.is.ready=Your CloudStack is ready\!
message.specifiy.tag.key.value=Please specify a tag key and value
message.enter.seperated.list.multiple.cidrs=Please enter a comma separated list of CIDRs if more than one
message.disabling.network.offering=Disabling network offering
message.confirm.enable.network.offering=Are you sure you want to enable this network offering?
message.enabling.network.offering=Enabling network offering
message.confirm.remove.network.offering=Are you sure you want to remove this network offering?
message.confirm.disable.network.offering=Are you sure you want to disable this network offering?
message.disabling.vpc.offering=Disabling VPC offering
message.confirm.enable.vpc.offering=Are you sure you want to enable this VPC offering?
message.enabling.vpc.offering=Enabling VPC offering
message.confirm.remove.vpc.offering=Are you sure you want to remove this VPC offering?
message.confirm.disable.vpc.offering=Are you sure you want to disable this VPC offering?
mode=Mode
network.rate=Network Rate
notification.reboot.instance=Reboot instance
notification.start.instance=Start instance
notification.stop.instance=Stop instance
side.by.side=Side by Side
state.Accepted=Accepted
state.Active=Active
state.Allocated=Allocated
state.Allocating=Allocating
state.BackedUp=Backed Up
state.BackingUp=Backing Up
state.Completed=Completed
state.Creating=Creating
state.Declined=Declined
state.Destroyed=Destroyed
state.detached=Detached
state.Disabled=Disabled
state.Enabled=Enabled
state.Error=Error
state.Expunging=Expunging
state.Migrating=Migrating
state.Pending=Pending
state.Ready=Ready
state.Running=Running
state.Starting=Starting
state.Stopped=Stopped
state.Stopping=Stopping
state.Suspended=Suspended
ui.listView.filters.all=All
ui.listView.filters.mine=Mine
label.na=N/A
label.added.network.offering=Added network offering
hint.type.part.storage.tag=Type in part of a storage tag
hint.type.part.host.tag=Type in part of a host tag
hint.no.storage.tags=No storage tags found
hint.no.host.tags=No host tags found
label.availabilityZone=availabilityZone
label.diskoffering=diskoffering
title.upload.volume=Upload Volume
label.format.lower=format
label.checksum=checksum
label.assign.vms=Assign VMs
label.extractable.lower=extractable
label.globo.dns=GloboDNS
label.add.globo.dns=Add GloboDNS
label.globo.dns.configuration=GloboDNS Configuration
label.region.details=Region details
label.baremetal.rack.configuration=Baremetal Rack Configuration
label.add.baremetal.rack.configuration=Add Baremetal Rack Configuration
label.delete.baremetal.rack.configuration=Delete Baremetal Rack Configuration
message.confirm.delete.baremetal.rack.configuration=Please confirm that you want to delete Baremetal Rack Configuration.
message.added.new.nuage.vsp.controller=Added new Nuage Vsp Controller
message.added.vpc.offering=Added VPC offering
label.keyboard.language=Keyboard language
label.standard.us.keyboard=Standard (US) keyboard
label.uk.keyboard=UK keyboard
label.japanese.keyboard=Japanese keyboard
label.simplified.chinese.keyboard=Simplified Chinese keyboard
label.display.name=Display Name
label.zone.name=Zone Name
label.instances=Instances
label.event=Event
label.minutes.past.hour=minutes(s) past the hour
label.time.colon=Time:
label.min.past.the.hr=min past the hr
label.timezone.colon=Timezone:
label.keep.colon=Keep:
label.every=Every
label.day=Day
label.of.month=of month
label.add.private.gateway=Add Private Gateway
label.link.domain.to.ldap=Link Domain to LDAP
message.link.domain.to.ldap=Enable autosync for this domain in LDAP
label.ldap.link.type=Type
label.account.type=Account Type
message.desc.created.ssh.key.pair=Created a SSH Key Pair.
message.please.confirm.remove.ssh.key.pair=Please confirm that you want to remove this SSH Key Pair
message.password.has.been.reset.to=Password has been reset to
message.password.of.the.vm.has.been.reset.to=Password of the VM has been reset to
message.question.are.you.sure.you.want.to.add=Are you sure you want to add
label.domain.details=Domain details
label.account.details=Account details
label.user.details=User details
label.service.offering.details=Service offering details
label.system.service.offering.details=System service offering details
label.disk.offering.details=Disk offering details
label.network.offering.details=Network offering details
label.remove.this.physical.network=Remove this physical network
label.physical.network.name=Physical network name
label.save.changes=Save changes
label.autoscale.configuration.wizard=AutoScale Configuration Wizard
label.health.check.wizard=Health Check Wizard
label.health.check.message.desc=Your load balancer will automatically perform health checks on your cloudstack instances and only route traffic to instances that pass the health check
label.health.check.configurations.options=Configuration Options:
label.health.check.advanced.options=Advanced Options:
label.add.isolated.guest.network.with.sourcenat=Add Isolated Guest Network with SourceNat
message.network.remote.access.vpn.configuration=Remote Access VPN configuration has been generated, but it failed to apply. Please check connectivity of the network element, then re-try.
label.vpc.router.details=VPC Router Details
label.edit.rule=Edit rule
label.advanced.search=Advanced Search
label.internal.lb=Internal LB
label.public.lb=Public LB
label.acl.list.rules=ACL List Rules
label.static.routes=Static Routes
label.network.details=Network Details
label.scaleup.policy=ScaleUp Policy
label.scaledown.policy=ScaleDown Policy
label.configure.sticky.policy=Configure Sticky Policy
label.please.complete.the.following.fields=Please complete the following fields
message.desc.add.new.lb.sticky.rule=Add new LB sticky rule
label.ssh.key.pairs=SSH Key Pairs
message.desc.create.ssh.key.pair=Please fill in the following data to create or register a ssh key pair.<br><br>(1) If public key is set, CloudStack will register the public key. You can use it through your private key.<br><br>(2) If public key is not set, CloudStack will create a new SSH Key pair. In this case, please copy and save the private key. CloudStack will not keep it.<br>
message.removed.ssh.key.pair=Removed a SSH Key Pair
message.please.select.ssh.key.pair.use.with.this.vm=Please select a ssh key pair you want this VM to use:
message.configure.firewall.rules.allow.traffic=Configure the rules to allow Traffic
message.configure.firewall.rules.block.traffic=Configure the rules to block Traffic
message.ldap.group.import=All The users from the given group name will be imported
label.vpn.force.encapsulation=Force UDP Encapsulation of ESP Packets