| package network |
| |
| // Copyright (c) Microsoft and contributors. All rights reserved. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| // |
| // Code generated by Microsoft (R) AutoRest Code Generator. |
| // Changes may cause incorrect behavior and will be lost if the code is regenerated. |
| |
| import ( |
| "context" |
| "github.com/Azure/go-autorest/autorest" |
| "github.com/Azure/go-autorest/autorest/azure" |
| "github.com/Azure/go-autorest/tracing" |
| "net/http" |
| ) |
| |
| // ExpressRouteCircuitPeeringsClient is the network Client |
| type ExpressRouteCircuitPeeringsClient struct { |
| BaseClient |
| } |
| |
| // NewExpressRouteCircuitPeeringsClient creates an instance of the ExpressRouteCircuitPeeringsClient client. |
| func NewExpressRouteCircuitPeeringsClient(subscriptionID string) ExpressRouteCircuitPeeringsClient { |
| return NewExpressRouteCircuitPeeringsClientWithBaseURI(DefaultBaseURI, subscriptionID) |
| } |
| |
| // NewExpressRouteCircuitPeeringsClientWithBaseURI creates an instance of the ExpressRouteCircuitPeeringsClient client. |
| func NewExpressRouteCircuitPeeringsClientWithBaseURI(baseURI string, subscriptionID string) ExpressRouteCircuitPeeringsClient { |
| return ExpressRouteCircuitPeeringsClient{NewWithBaseURI(baseURI, subscriptionID)} |
| } |
| |
| // CreateOrUpdate creates or updates a peering in the specified express route circuits. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // circuitName - the name of the express route circuit. |
| // peeringName - the name of the peering. |
| // peeringParameters - parameters supplied to the create or update express route circuit peering operation. |
| func (client ExpressRouteCircuitPeeringsClient) CreateOrUpdate(ctx context.Context, resourceGroupName string, circuitName string, peeringName string, peeringParameters ExpressRouteCircuitPeering) (result ExpressRouteCircuitPeeringsCreateOrUpdateFuture, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ExpressRouteCircuitPeeringsClient.CreateOrUpdate") |
| defer func() { |
| sc := -1 |
| if result.Response() != nil { |
| sc = result.Response().StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.CreateOrUpdatePreparer(ctx, resourceGroupName, circuitName, peeringName, peeringParameters) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "CreateOrUpdate", nil, "Failure preparing request") |
| return |
| } |
| |
| result, err = client.CreateOrUpdateSender(req) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "CreateOrUpdate", result.Response(), "Failure sending request") |
| return |
| } |
| |
| return |
| } |
| |
| // CreateOrUpdatePreparer prepares the CreateOrUpdate request. |
| func (client ExpressRouteCircuitPeeringsClient) CreateOrUpdatePreparer(ctx context.Context, resourceGroupName string, circuitName string, peeringName string, peeringParameters ExpressRouteCircuitPeering) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "circuitName": autorest.Encode("path", circuitName), |
| "peeringName": autorest.Encode("path", peeringName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsContentType("application/json; charset=utf-8"), |
| autorest.AsPut(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/expressRouteCircuits/{circuitName}/peerings/{peeringName}", pathParameters), |
| autorest.WithJSON(peeringParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // CreateOrUpdateSender sends the CreateOrUpdate request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ExpressRouteCircuitPeeringsClient) CreateOrUpdateSender(req *http.Request) (future ExpressRouteCircuitPeeringsCreateOrUpdateFuture, err error) { |
| var resp *http.Response |
| resp, err = autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| if err != nil { |
| return |
| } |
| future.Future, err = azure.NewFutureFromResponse(resp) |
| return |
| } |
| |
| // CreateOrUpdateResponder handles the response to the CreateOrUpdate request. The method always |
| // closes the http.Response Body. |
| func (client ExpressRouteCircuitPeeringsClient) CreateOrUpdateResponder(resp *http.Response) (result ExpressRouteCircuitPeering, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusCreated), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // Delete deletes the specified peering from the specified express route circuit. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // circuitName - the name of the express route circuit. |
| // peeringName - the name of the peering. |
| func (client ExpressRouteCircuitPeeringsClient) Delete(ctx context.Context, resourceGroupName string, circuitName string, peeringName string) (result ExpressRouteCircuitPeeringsDeleteFuture, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ExpressRouteCircuitPeeringsClient.Delete") |
| defer func() { |
| sc := -1 |
| if result.Response() != nil { |
| sc = result.Response().StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.DeletePreparer(ctx, resourceGroupName, circuitName, peeringName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "Delete", nil, "Failure preparing request") |
| return |
| } |
| |
| result, err = client.DeleteSender(req) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "Delete", result.Response(), "Failure sending request") |
| return |
| } |
| |
| return |
| } |
| |
| // DeletePreparer prepares the Delete request. |
| func (client ExpressRouteCircuitPeeringsClient) DeletePreparer(ctx context.Context, resourceGroupName string, circuitName string, peeringName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "circuitName": autorest.Encode("path", circuitName), |
| "peeringName": autorest.Encode("path", peeringName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsDelete(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/expressRouteCircuits/{circuitName}/peerings/{peeringName}", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // DeleteSender sends the Delete request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ExpressRouteCircuitPeeringsClient) DeleteSender(req *http.Request) (future ExpressRouteCircuitPeeringsDeleteFuture, err error) { |
| var resp *http.Response |
| resp, err = autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| if err != nil { |
| return |
| } |
| future.Future, err = azure.NewFutureFromResponse(resp) |
| return |
| } |
| |
| // DeleteResponder handles the response to the Delete request. The method always |
| // closes the http.Response Body. |
| func (client ExpressRouteCircuitPeeringsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted, http.StatusNoContent), |
| autorest.ByClosing()) |
| result.Response = resp |
| return |
| } |
| |
| // Get gets the specified authorization from the specified express route circuit. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // circuitName - the name of the express route circuit. |
| // peeringName - the name of the peering. |
| func (client ExpressRouteCircuitPeeringsClient) Get(ctx context.Context, resourceGroupName string, circuitName string, peeringName string) (result ExpressRouteCircuitPeering, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ExpressRouteCircuitPeeringsClient.Get") |
| defer func() { |
| sc := -1 |
| if result.Response.Response != nil { |
| sc = result.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| req, err := client.GetPreparer(ctx, resourceGroupName, circuitName, peeringName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "Get", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.GetSender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "Get", resp, "Failure sending request") |
| return |
| } |
| |
| result, err = client.GetResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "Get", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // GetPreparer prepares the Get request. |
| func (client ExpressRouteCircuitPeeringsClient) GetPreparer(ctx context.Context, resourceGroupName string, circuitName string, peeringName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "circuitName": autorest.Encode("path", circuitName), |
| "peeringName": autorest.Encode("path", peeringName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/expressRouteCircuits/{circuitName}/peerings/{peeringName}", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // GetSender sends the Get request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ExpressRouteCircuitPeeringsClient) GetSender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // GetResponder handles the response to the Get request. The method always |
| // closes the http.Response Body. |
| func (client ExpressRouteCircuitPeeringsClient) GetResponder(resp *http.Response) (result ExpressRouteCircuitPeering, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // List gets all peerings in a specified express route circuit. |
| // Parameters: |
| // resourceGroupName - the name of the resource group. |
| // circuitName - the name of the express route circuit. |
| func (client ExpressRouteCircuitPeeringsClient) List(ctx context.Context, resourceGroupName string, circuitName string) (result ExpressRouteCircuitPeeringListResultPage, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ExpressRouteCircuitPeeringsClient.List") |
| defer func() { |
| sc := -1 |
| if result.ercplr.Response.Response != nil { |
| sc = result.ercplr.Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| result.fn = client.listNextResults |
| req, err := client.ListPreparer(ctx, resourceGroupName, circuitName) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "List", nil, "Failure preparing request") |
| return |
| } |
| |
| resp, err := client.ListSender(req) |
| if err != nil { |
| result.ercplr.Response = autorest.Response{Response: resp} |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "List", resp, "Failure sending request") |
| return |
| } |
| |
| result.ercplr, err = client.ListResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "List", resp, "Failure responding to request") |
| } |
| |
| return |
| } |
| |
| // ListPreparer prepares the List request. |
| func (client ExpressRouteCircuitPeeringsClient) ListPreparer(ctx context.Context, resourceGroupName string, circuitName string) (*http.Request, error) { |
| pathParameters := map[string]interface{}{ |
| "circuitName": autorest.Encode("path", circuitName), |
| "resourceGroupName": autorest.Encode("path", resourceGroupName), |
| "subscriptionId": autorest.Encode("path", client.SubscriptionID), |
| } |
| |
| const APIVersion = "2017-09-01" |
| queryParameters := map[string]interface{}{ |
| "api-version": APIVersion, |
| } |
| |
| preparer := autorest.CreatePreparer( |
| autorest.AsGet(), |
| autorest.WithBaseURL(client.BaseURI), |
| autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Network/expressRouteCircuits/{circuitName}/peerings", pathParameters), |
| autorest.WithQueryParameters(queryParameters)) |
| return preparer.Prepare((&http.Request{}).WithContext(ctx)) |
| } |
| |
| // ListSender sends the List request. The method will close the |
| // http.Response Body if it receives an error. |
| func (client ExpressRouteCircuitPeeringsClient) ListSender(req *http.Request) (*http.Response, error) { |
| return autorest.SendWithSender(client, req, |
| azure.DoRetryWithRegistration(client.Client)) |
| } |
| |
| // ListResponder handles the response to the List request. The method always |
| // closes the http.Response Body. |
| func (client ExpressRouteCircuitPeeringsClient) ListResponder(resp *http.Response) (result ExpressRouteCircuitPeeringListResult, err error) { |
| err = autorest.Respond( |
| resp, |
| client.ByInspecting(), |
| azure.WithErrorUnlessStatusCode(http.StatusOK), |
| autorest.ByUnmarshallingJSON(&result), |
| autorest.ByClosing()) |
| result.Response = autorest.Response{Response: resp} |
| return |
| } |
| |
| // listNextResults retrieves the next set of results, if any. |
| func (client ExpressRouteCircuitPeeringsClient) listNextResults(ctx context.Context, lastResults ExpressRouteCircuitPeeringListResult) (result ExpressRouteCircuitPeeringListResult, err error) { |
| req, err := lastResults.expressRouteCircuitPeeringListResultPreparer(ctx) |
| if err != nil { |
| return result, autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "listNextResults", nil, "Failure preparing next results request") |
| } |
| if req == nil { |
| return |
| } |
| resp, err := client.ListSender(req) |
| if err != nil { |
| result.Response = autorest.Response{Response: resp} |
| return result, autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "listNextResults", resp, "Failure sending next results request") |
| } |
| result, err = client.ListResponder(resp) |
| if err != nil { |
| err = autorest.NewErrorWithError(err, "network.ExpressRouteCircuitPeeringsClient", "listNextResults", resp, "Failure responding to next results request") |
| } |
| return |
| } |
| |
| // ListComplete enumerates all values, automatically crossing page boundaries as required. |
| func (client ExpressRouteCircuitPeeringsClient) ListComplete(ctx context.Context, resourceGroupName string, circuitName string) (result ExpressRouteCircuitPeeringListResultIterator, err error) { |
| if tracing.IsEnabled() { |
| ctx = tracing.StartSpan(ctx, fqdn+"/ExpressRouteCircuitPeeringsClient.List") |
| defer func() { |
| sc := -1 |
| if result.Response().Response.Response != nil { |
| sc = result.page.Response().Response.Response.StatusCode |
| } |
| tracing.EndSpan(ctx, sc, err) |
| }() |
| } |
| result.page, err = client.List(ctx, resourceGroupName, circuitName) |
| return |
| } |