| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information# |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| # Makefile for Sphinx documentation |
| # |
| |
| # You can set these variables from the command line. |
| SPHINXOPTS = |
| SPHINXBUILD = sphinx-build |
| PAPER = |
| BUILDDIR = build |
| |
| # User-friendly check for sphinx-build |
| ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) |
| $(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) |
| endif |
| |
| # Internal variables. |
| PAPEROPT_a4 = -D latex_paper_size=a4 |
| PAPEROPT_letter = -D latex_paper_size=letter |
| ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source |
| # the i18n builder cannot share the environment and doctrees with the others |
| I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source |
| |
| .PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext |
| |
| help: |
| @echo "Please use \`make <target>' where <target> is one of" |
| @echo " html to make standalone HTML files" |
| @echo " dirhtml to make HTML files named index.html in directories" |
| @echo " singlehtml to make a single large HTML file" |
| @echo " pickle to make pickle files" |
| @echo " json to make JSON files" |
| @echo " htmlhelp to make HTML files and a HTML help project" |
| @echo " qthelp to make HTML files and a qthelp project" |
| @echo " devhelp to make HTML files and a Devhelp project" |
| @echo " epub to make an epub" |
| @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" |
| @echo " latexpdf to make LaTeX files and run them through pdflatex" |
| @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" |
| @echo " text to make text files" |
| @echo " man to make manual pages" |
| @echo " texinfo to make Texinfo files" |
| @echo " info to make Texinfo files and run them through makeinfo" |
| @echo " gettext to make PO message catalogs" |
| @echo " changes to make an overview of all changed/added/deprecated items" |
| @echo " xml to make Docutils-native XML files" |
| @echo " pseudoxml to make pseudoxml-XML files for display purposes" |
| @echo " linkcheck to check all external links for integrity" |
| @echo " doctest to run all doctests embedded in the documentation (if enabled)" |
| |
| clean: |
| rm -rf $(BUILDDIR)/* |
| |
| html: |
| $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html |
| @echo |
| @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." |
| |
| dirhtml: |
| $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml |
| @echo |
| @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." |
| |
| singlehtml: |
| $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml |
| @echo |
| @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." |
| |
| pickle: |
| $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle |
| @echo |
| @echo "Build finished; now you can process the pickle files." |
| |
| json: |
| $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json |
| @echo |
| @echo "Build finished; now you can process the JSON files." |
| |
| htmlhelp: |
| $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp |
| @echo |
| @echo "Build finished; now you can run HTML Help Workshop with the" \ |
| ".hhp project file in $(BUILDDIR)/htmlhelp." |
| |
| qthelp: |
| $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp |
| @echo |
| @echo "Build finished; now you can run "qcollectiongenerator" with the" \ |
| ".qhcp project file in $(BUILDDIR)/qthelp, like this:" |
| @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/CloudStackReleaseNotes.qhcp" |
| @echo "To view the help file:" |
| @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/CloudStackReleaseNotes.qhc" |
| |
| devhelp: |
| $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp |
| @echo |
| @echo "Build finished." |
| @echo "To view the help file:" |
| @echo "# mkdir -p $$HOME/.local/share/devhelp/CloudStackReleaseNotes" |
| @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/CloudStackReleaseNotes" |
| @echo "# devhelp" |
| |
| epub: |
| $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub |
| @echo |
| @echo "Build finished. The epub file is in $(BUILDDIR)/epub." |
| |
| latex: |
| $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex |
| @echo |
| @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." |
| @echo "Run \`make' in that directory to run these through (pdf)latex" \ |
| "(use \`make latexpdf' here to do that automatically)." |
| |
| latexpdf: |
| $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex |
| @echo "Running LaTeX files through pdflatex..." |
| $(MAKE) -C $(BUILDDIR)/latex all-pdf |
| @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." |
| |
| latexpdfja: |
| $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex |
| @echo "Running LaTeX files through platex and dvipdfmx..." |
| $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja |
| @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." |
| |
| text: |
| $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text |
| @echo |
| @echo "Build finished. The text files are in $(BUILDDIR)/text." |
| |
| man: |
| $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man |
| @echo |
| @echo "Build finished. The manual pages are in $(BUILDDIR)/man." |
| |
| texinfo: |
| $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo |
| @echo |
| @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." |
| @echo "Run \`make' in that directory to run these through makeinfo" \ |
| "(use \`make info' here to do that automatically)." |
| |
| info: |
| $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo |
| @echo "Running Texinfo files through makeinfo..." |
| make -C $(BUILDDIR)/texinfo info |
| @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." |
| |
| gettext: |
| $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) source/locale/pot |
| @echo |
| @echo "Build finished. The message catalogs are in source/locale/pot" |
| |
| changes: |
| $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes |
| @echo |
| @echo "The overview file is in $(BUILDDIR)/changes." |
| |
| linkcheck: |
| $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck |
| @echo |
| @echo "Link check complete; look for any errors in the above output " \ |
| "or in $(BUILDDIR)/linkcheck/output.txt." |
| |
| doctest: |
| $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest |
| @echo "Testing of doctests in the sources finished, look at the " \ |
| "results in $(BUILDDIR)/doctest/output.txt." |
| |
| xml: |
| $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml |
| @echo |
| @echo "Build finished. The XML files are in $(BUILDDIR)/xml." |
| |
| pseudoxml: |
| $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml |
| @echo |
| @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." |