source/locale/fr/LC_MESSAGES/networking/security_groups.po - cloudstack-docs-admin - Git at Google

 # Licensed to the Apache Software Foundation (ASF) under one
 # or more contributor license agreements.  See the NOTICE file
 # distributed with this work for additional information
 # regarding copyright ownership.  The ASF licenses this file
 # to you under the Apache License, Version 2.0 (the
 # "License"); you may not use this file except in compliance
 # with the License.  You may obtain a copy of the License at
 #
 #   http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing,
 # software distributed under the License is distributed on an
 # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 # KIND, either express or implied.  See the License for the
 # specific language governing permissions and limitations
 # under the License.
 #
 # Translators:
 msgid ""
 msgstr ""
 "Project-Id-Version: Apache CloudStack Administration RTD\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2014-06-30 12:52+0200\n"
 "PO-Revision-Date: 2016-12-21 10:23+0100\n"
 "Language-Team: French (http://www.transifex.com/ke4qqq/apache-cloudstack-"
 "administration-rtd/language/fr/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Language: fr\n"
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 "Last-Translator: \n"
 "X-Generator: Poedit 1.8.11\n"

 # b67087ae536e4b77ac5668f8f3f73ba8
 #: ../../networking/security_groups.rst:18
 msgid "Security Groups"
 msgstr "Groupes de sécurité"

 # 1397d3fadf7d45779a890fb7156cf142
 #: ../../networking/security_groups.rst:21
 msgid "About Security Groups"
 msgstr "A propos des groupes de sécurité"

 # 965e0935679141b0bc89e0d82dc1cff8
 #: ../../networking/security_groups.rst:23
 msgid ""
 "Security groups provide a way to isolate traffic to VMs. A security group "
 "is a group of VMs that filter their incoming and outgoing traffic according "
 "to a set of rules, called ingress and egress rules. These rules filter "
 "network traffic according to the IP address that is attempting to "
 "communicate with the VM. Security groups are particularly useful in zones "
 "that use basic networking, because there is a single guest network for all "
 "guest VMs. In advanced zones, security groups are supported only on the KVM "
 "hypervisor."
 msgstr ""

 # 7cc1c024596546c4837b5e09cef7f7db
 #: ../../networking/security_groups.rst:33
 msgid ""
 "In a zone that uses advanced networking, you can instead define multiple "
 "guest networks to isolate traffic to VMs."
 msgstr ""

 # bd8429af9a564cd398104231d1bfc2d9
 #: ../../networking/security_groups.rst:36
 msgid ""
 "Each CloudStack account comes with a default security group that denies all "
 "inbound traffic and allows all outbound traffic. The default security group "
 "can be modified so that all new VMs inherit some other desired set of rules."
 msgstr ""

 # 3eb3f0e93cf04d8a9c2a967e8ff3a11c
 #: ../../networking/security_groups.rst:41
 msgid ""
 "Any CloudStack user can set up any number of additional security groups. "
 "When a new VM is launched, it is assigned to the default security group "
 "unless another user-defined security group is specified. A VM can be a "
 "member of any number of security groups. Once a VM is assigned to a "
 "security group, it remains in that group for its entire lifetime; you can "
 "not move a running VM from one security group to another."
 msgstr ""

 # 1d91c7babdd54f38b62e9e65788a8a7c
 #: ../../networking/security_groups.rst:48
 msgid ""
 "You can modify a security group by deleting or adding any number of ingress "
 "and egress rules. When you do, the new rules apply to all VMs in the group, "
 "whether running or stopped."
 msgstr ""

 # f705f2a195b240f49ffc0cbe9aaa253a
 #: ../../networking/security_groups.rst:52
 msgid ""
 "If no ingress rules are specified, then no traffic will be allowed in, "
 "except for responses to any traffic that has been allowed out through an "
 "egress rule."
 msgstr ""

 # 7fa1798aea704a55b545171eb64a16bd
 #: ../../networking/security_groups.rst:58
 msgid "Adding a Security Group"
 msgstr "Ajouter un groupe de sécurité"

 # f7cc763899ad4df99b9e927ef37eabb4
 #: ../../networking/security_groups.rst:60
 msgid "A user or administrator can define a new security group."
 msgstr ""
 "Un utilisateur ou un administrateur peut définir un nouveau groupe de "
 "sécurité."

 # a026f1875e7f4cec8447b013bf2d7a78
 # 27e30ee65cbe485bb8e7370a38b75281
 #: ../../networking/security_groups.rst:62
 #: ../../networking/security_groups.rst:124
 msgid "Log in to the CloudStack UI as an administrator or end user."
 msgstr ""
 "Se connecter à l'interface de CloudStack comme administrateur ou "
 "utilisateur final."

 # 344ee6a79a674e88a4a61b24b0a01b42
 #: ../../networking/security_groups.rst:64
 msgid "In the left navigation, choose Network."
 msgstr "Dans la navigation à gauche, choisissez Réseau."

 # 07579af87ecd4f1d8bd6e66835cb2958
 #: ../../networking/security_groups.rst:66
 msgid "In Select view, choose Security Groups."
 msgstr "Dans la zone de sélection, choisir Groupes de Sécurité."

 # 23507439460f427cb5be523f65e254fb
 #: ../../networking/security_groups.rst:68
 msgid "Click Add Security Group."
 msgstr "Cliquer sur Ajouter un groupe de sécurité."

 # a530b7d59d194fb18081a92d396a272a
 #: ../../networking/security_groups.rst:70
 msgid "Provide a name and description."
 msgstr "Fournir un nom et une description."

 # 237fc184482448589b8a2eb7c3c70e76
 #: ../../networking/security_groups.rst:72
 msgid "Click OK."
 msgstr "Cliquez sur OK."

 # 34ea82240e9c456ab55ff2f0d5756566
 #: ../../networking/security_groups.rst:74
 msgid "The new security group appears in the Security Groups Details tab."
 msgstr ""
 "Le nouveau groupe de sécurité apparaît dans l'onglet Détails des Groupes de "
 "Sécurité."

 # df20adfc9c2e43b9b56c6f1119a9d73f
 #: ../../networking/security_groups.rst:76
 msgid ""
 "To make the security group useful, continue to Adding Ingress and Egress "
 "Rules to a Security Group."
 msgstr ""
 "Pour rendre le groupe de sécurité utile, continuez par Ajouter des règles "
 "Ingress et Egress à un groupe de sécurité."

 # 0a506fc7186b4a0c8a15ae463c4793e1
 #: ../../networking/security_groups.rst:81
 msgid "Security Groups in Advanced Zones (KVM Only)"
 msgstr "Groupes de sécurité dans les Zones Avancées (KVM uniquement)"

 # b2a6fb8be2384189ae73c2430ce94159
 #: ../../networking/security_groups.rst:83
 msgid ""
 "CloudStack provides the ability to use security groups to provide isolation "
 "between guests on a single shared, zone-wide network in an advanced zone "
 "where KVM is the hypervisor. Using security groups in advanced zones rather "
 "than multiple VLANs allows a greater range of options for setting up guest "
 "isolation in a cloud."
 msgstr ""

 # 180782afad3643f1ba9672b7f6da72b3
 #: ../../networking/security_groups.rst:91
 msgid "Limitations"
 msgstr "Limitations"

 # 133ba38a19484e2e9122631ab38446fa
 #: ../../networking/security_groups.rst:93
 msgid "The following are not supported for this feature:"
 msgstr ""
 "Les éléments suivants ne sont pas pris en charge pour cette fonctionnalité :"

 # 7c46f4b3ab9f405b8ba2b599ffc1985e
 #: ../../networking/security_groups.rst:95
 msgid ""
 "Two IP ranges with the same VLAN and different gateway or netmask in "
 "security group-enabled shared network."
 msgstr ""
 "Deux plages d'IP avec le même VLAN et une passerelle ou masque de réseau "
 "différent dans un réseau partagé avec groupes de sécurité."

 # 25d83dec92f045bda786a85257b3e1d1
 #: ../../networking/security_groups.rst:98
 msgid ""
 "Two IP ranges with the same VLAN and different gateway or netmask in "
 "account-specific shared networks."
 msgstr ""
 "Deux plages d'IP avec le même VLAN et une passerelle ou un masque de réseau "
 "différent dans des réseaux partagés spécifiques à un compte."

 # 529f72b64c464f0cbbe8b287e8258f1a
 #: ../../networking/security_groups.rst:101
 msgid "Multiple VLAN ranges in security group-enabled shared network."
 msgstr ""
 "Plusieurs plages de VLAN dans un réseau partagé avec groupes de sécurité."

 # c9ffb5f82e6b45778e4e1b83b29ed310
 #: ../../networking/security_groups.rst:103
 msgid "Multiple VLAN ranges in account-specific shared networks."
 msgstr ""
 "Plusieurs plages de VLAN dans des réseaux partagés spécifiques à un compte."

 # 8488c958047d450bb250b38d098bc214
 #: ../../networking/security_groups.rst:105
 msgid ""
 "Security groups must be enabled in the zone in order for this feature to be "
 "used."
 msgstr ""
 "Les groupes de sécurité doivent être activés dans la zone pour que cette "
 "fonctionnalité soit utilisée."

 # 6c5be222e8184b8ab28d3019648e9990
 #: ../../networking/security_groups.rst:110
 msgid "Enabling Security Groups"
 msgstr "Activer les groupes de sécurité."

 # b6b2af559254408ba42336e7fddf32e6
 #: ../../networking/security_groups.rst:112
 msgid ""
 "In order for security groups to function in a zone, the security groups "
 "feature must first be enabled for the zone. The administrator can do this "
 "when creating a new zone, by selecting a network offering that includes "
 "security groups. The procedure is described in Basic Zone Configuration in "
 "the Advanced Installation Guide. The administrator can not enable security "
 "groups for an existing zone, only when creating a new zone."
 msgstr ""

 # e09d51e1a259488eab79d1fb28954b59
 #: ../../networking/security_groups.rst:122
 msgid "Adding Ingress and Egress Rules to a Security Group"
 msgstr "Ajout de règles Ingress et Egress à un Groupe de Sécurité"

 # b24e5ca705b84ea4a6c0511ef2244936
 #: ../../networking/security_groups.rst:126
 msgid "In the left navigation, choose Network"
 msgstr "Dans la navigation à gauche, choisissez Réseau."

 # e6e52ad277a249ebb052f48c14687e98
 #: ../../networking/security_groups.rst:128
 msgid ""
 "In Select view, choose Security Groups, then click the security group you "
 "want."
 msgstr ""
 "Dans la liste de choix, choisir Groupes de sécurité puis cliquer sur le "
 "groupe de sécurité désiré."

 # 4563cb9609194e7b8bfe401fa3b6219e
 #: ../../networking/security_groups.rst:131
 msgid ""
 "To add an ingress rule, click the Ingress Rules tab and fill out the "
 "following fields to specify what network traffic is allowed into VM "
 "instances in this security group. If no ingress rules are specified, then "
 "no traffic will be allowed in, except for responses to any traffic that has "
 "been allowed out through an egress rule."
 msgstr ""

 # a4934e5b794b41469ff66677df530f64
 #: ../../networking/security_groups.rst:137
 msgid ""
 "**Add by CIDR/Account**. Indicate whether the source of the traffic will be "
 "defined by IP address (CIDR) or an existing security group in a CloudStack "
 "account (Account). Choose Account if you want to allow incoming traffic "
 "from all VMs in another security group"
 msgstr ""

 # 38c863d52b6c4f3b900f9268d71a3167
 #: ../../networking/security_groups.rst:143
 msgid ""
 "**Protocol**. The networking protocol that sources will use to send traffic "
 "to the security group. TCP and UDP are typically used for data exchange and "
 "end-user communications. ICMP is typically used to send error messages or "
 "network monitoring data."
 msgstr ""

 # bcb96d430c8649f483335f10c670e649
 #: ../../networking/security_groups.rst:148
 msgid ""
 "**Start Port, End Port**. (TCP, UDP only) A range of listening ports that "
 "are the destination for the incoming traffic. If you are opening a single "
 "port, use the same number in both fields."
 msgstr ""

 # 6c1ac4c3fb7e476a8eba891bbf1fa14e
 #: ../../networking/security_groups.rst:152
 msgid ""
 "**ICMP Type, ICMP Code**. (ICMP only) The type of message and error code "
 "that will be accepted."
 msgstr ""

 # 6d982263975e486e8e1b13fe56a83ed0
 #: ../../networking/security_groups.rst:155
 msgid ""
 "**CIDR**. (Add by CIDR only) To accept only traffic from IP addresses "
 "within a particular address block, enter a CIDR or a comma-separated list "
 "of CIDRs. The CIDR is the base IP address of the incoming traffic. For "
 "example, 192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0."
 msgstr ""

 # 10e7f63d3cf94152a51416bc737199ed
 #: ../../networking/security_groups.rst:161
 msgid ""
 "**Account, Security Group**. (Add by Account only) To accept only traffic "
 "from another security group, enter the CloudStack account and name of a "
 "security group that has already been defined in that account. To allow "
 "traffic between VMs within the security group you are editing now, enter "
 "the same name you used in step 7."
 msgstr ""

 # 9d70746377c24fdb80bdb73145dda1fe
 #: ../../networking/security_groups.rst:167
 msgid "The following example allows inbound HTTP access from anywhere:"
 msgstr ""
 "L'exemple qui suit autorise l'accès HTTP entrant depuis n'importe où :"

 # f1fa895a70e745a182f076db946d9d16
 #: ../../networking/security_groups.rst:169
 msgid "|httpaccess.png|"
 msgstr "|httpaccess.png|"

 # 25c1f9eee689482ab0a99049e45c6ceb
 #: ../../networking/security_groups.rst:171
 msgid ""
 "To add an egress rule, click the Egress Rules tab and fill out the "
 "following fields to specify what type of traffic is allowed to be sent out "
 "of VM instances in this security group. If no egress rules are specified, "
 "then all traffic will be allowed out. Once egress rules are specified, the "
 "following types of traffic are allowed out: traffic specified in egress "
 "rules; queries to DNS and DHCP servers; and responses to any traffic that "
 "has been allowed in through an ingress rule"
 msgstr ""

 # 83bfb97418d545549c3ea5c0a17c5985
 #: ../../networking/security_groups.rst:180
 msgid ""
 "**Add by CIDR/Account**. Indicate whether the destination of the traffic "
 "will be defined by IP address (CIDR) or an existing security group in a "
 "CloudStack account (Account). Choose Account if you want to allow outgoing "
 "traffic to all VMs in another security group."
 msgstr ""

 # f175b78e34494795b301760a7fd5168f
 #: ../../networking/security_groups.rst:186
 msgid ""
 "**Protocol**. The networking protocol that VMs will use to send outgoing "
 "traffic. TCP and UDP are typically used for data exchange and end-user "
 "communications. ICMP is typically used to send error messages or network "
 "monitoring data."
 msgstr ""

 # 31089018bb9f47e4941651c91b2bd90c
 #: ../../networking/security_groups.rst:191
 msgid ""
 "**Start Port, End Port**. (TCP, UDP only) A range of listening ports that "
 "are the destination for the outgoing traffic. If you are opening a single "
 "port, use the same number in both fields."
 msgstr ""

 # 96661f61b9b54d448e5e7be7ba933296
 #: ../../networking/security_groups.rst:195
 msgid ""
 "**ICMP Type, ICMP Code**. (ICMP only) The type of message and error code "
 "that will be sent"
 msgstr ""

 # 7e52dd9e52524ea98f0bcf7ff00116ac
 #: ../../networking/security_groups.rst:198
 msgid ""
 "**CIDR**. (Add by CIDR only) To send traffic only to IP addresses within a "
 "particular address block, enter a CIDR or a comma-separated list of CIDRs. "
 "The CIDR is the base IP address of the destination. For example, "
 "192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0."
 msgstr ""

 # 40e0b1515ef948adb1a42642f73f490d
 #: ../../networking/security_groups.rst:204
 msgid ""
 "**Account, Security Group**. (Add by Account only) To allow traffic to be "
 "sent to another security group, enter the CloudStack account and name of a "
 "security group that has already been defined in that account. To allow "
 "traffic between VMs within the security group you are editing now, enter "
 "its name."
 msgstr ""

 # 39febf06883a4d248d1ac5ad19510065
 #: ../../networking/security_groups.rst:210
 msgid "Click Add."
 msgstr "Cliquer sur Ajouter."
	# Licensed to the Apache Software Foundation (ASF) under one
	# or more contributor license agreements. See the NOTICE file
	# distributed with this work for additional information
	# regarding copyright ownership. The ASF licenses this file
	# to you under the Apache License, Version 2.0 (the
	# "License"); you may not use this file except in compliance
	# with the License. You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing,
	# software distributed under the License is distributed on an
	# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	# KIND, either express or implied. See the License for the
	# specific language governing permissions and limitations
	# under the License.
	#
	# Translators:
	msgid ""
	msgstr ""
	"Project-Id-Version: Apache CloudStack Administration RTD\n"
	"Report-Msgid-Bugs-To: \n"
	"POT-Creation-Date: 2014-06-30 12:52+0200\n"
	"PO-Revision-Date: 2016-12-21 10:23+0100\n"
	"Language-Team: French (http://www.transifex.com/ke4qqq/apache-cloudstack-"
	"administration-rtd/language/fr/)\n"
	"MIME-Version: 1.0\n"
	"Content-Type: text/plain; charset=UTF-8\n"
	"Content-Transfer-Encoding: 8bit\n"
	"Language: fr\n"
	"Plural-Forms: nplurals=2; plural=(n > 1);\n"
	"Last-Translator: \n"
	"X-Generator: Poedit 1.8.11\n"

	# b67087ae536e4b77ac5668f8f3f73ba8
	#: ../../networking/security_groups.rst:18
	msgid "Security Groups"
	msgstr "Groupes de sécurité"

	# 1397d3fadf7d45779a890fb7156cf142
	#: ../../networking/security_groups.rst:21
	msgid "About Security Groups"
	msgstr "A propos des groupes de sécurité"

	# 965e0935679141b0bc89e0d82dc1cff8
	#: ../../networking/security_groups.rst:23
	msgid ""
	"Security groups provide a way to isolate traffic to VMs. A security group "
	"is a group of VMs that filter their incoming and outgoing traffic according "
	"to a set of rules, called ingress and egress rules. These rules filter "
	"network traffic according to the IP address that is attempting to "
	"communicate with the VM. Security groups are particularly useful in zones "
	"that use basic networking, because there is a single guest network for all "
	"guest VMs. In advanced zones, security groups are supported only on the KVM "
	"hypervisor."
	msgstr ""

	# 7cc1c024596546c4837b5e09cef7f7db
	#: ../../networking/security_groups.rst:33
	msgid ""
	"In a zone that uses advanced networking, you can instead define multiple "
	"guest networks to isolate traffic to VMs."
	msgstr ""

	# bd8429af9a564cd398104231d1bfc2d9
	#: ../../networking/security_groups.rst:36
	msgid ""
	"Each CloudStack account comes with a default security group that denies all "
	"inbound traffic and allows all outbound traffic. The default security group "
	"can be modified so that all new VMs inherit some other desired set of rules."
	msgstr ""

	# 3eb3f0e93cf04d8a9c2a967e8ff3a11c
	#: ../../networking/security_groups.rst:41
	msgid ""
	"Any CloudStack user can set up any number of additional security groups. "
	"When a new VM is launched, it is assigned to the default security group "
	"unless another user-defined security group is specified. A VM can be a "
	"member of any number of security groups. Once a VM is assigned to a "
	"security group, it remains in that group for its entire lifetime; you can "
	"not move a running VM from one security group to another."
	msgstr ""

	# 1d91c7babdd54f38b62e9e65788a8a7c
	#: ../../networking/security_groups.rst:48
	msgid ""
	"You can modify a security group by deleting or adding any number of ingress "
	"and egress rules. When you do, the new rules apply to all VMs in the group, "
	"whether running or stopped."
	msgstr ""

	# f705f2a195b240f49ffc0cbe9aaa253a
	#: ../../networking/security_groups.rst:52
	msgid ""
	"If no ingress rules are specified, then no traffic will be allowed in, "
	"except for responses to any traffic that has been allowed out through an "
	"egress rule."
	msgstr ""

	# 7fa1798aea704a55b545171eb64a16bd
	#: ../../networking/security_groups.rst:58
	msgid "Adding a Security Group"
	msgstr "Ajouter un groupe de sécurité"

	# f7cc763899ad4df99b9e927ef37eabb4
	#: ../../networking/security_groups.rst:60
	msgid "A user or administrator can define a new security group."
	msgstr ""
	"Un utilisateur ou un administrateur peut définir un nouveau groupe de "
	"sécurité."

	# a026f1875e7f4cec8447b013bf2d7a78
	# 27e30ee65cbe485bb8e7370a38b75281
	#: ../../networking/security_groups.rst:62
	#: ../../networking/security_groups.rst:124
	msgid "Log in to the CloudStack UI as an administrator or end user."
	msgstr ""
	"Se connecter à l'interface de CloudStack comme administrateur ou "
	"utilisateur final."

	# 344ee6a79a674e88a4a61b24b0a01b42
	#: ../../networking/security_groups.rst:64
	msgid "In the left navigation, choose Network."
	msgstr "Dans la navigation à gauche, choisissez Réseau."

	# 07579af87ecd4f1d8bd6e66835cb2958
	#: ../../networking/security_groups.rst:66
	msgid "In Select view, choose Security Groups."
	msgstr "Dans la zone de sélection, choisir Groupes de Sécurité."

	# 23507439460f427cb5be523f65e254fb
	#: ../../networking/security_groups.rst:68
	msgid "Click Add Security Group."
	msgstr "Cliquer sur Ajouter un groupe de sécurité."

	# a530b7d59d194fb18081a92d396a272a
	#: ../../networking/security_groups.rst:70
	msgid "Provide a name and description."
	msgstr "Fournir un nom et une description."

	# 237fc184482448589b8a2eb7c3c70e76
	#: ../../networking/security_groups.rst:72
	msgid "Click OK."
	msgstr "Cliquez sur OK."

	# 34ea82240e9c456ab55ff2f0d5756566
	#: ../../networking/security_groups.rst:74
	msgid "The new security group appears in the Security Groups Details tab."
	msgstr ""
	"Le nouveau groupe de sécurité apparaît dans l'onglet Détails des Groupes de "
	"Sécurité."

	# df20adfc9c2e43b9b56c6f1119a9d73f
	#: ../../networking/security_groups.rst:76
	msgid ""
	"To make the security group useful, continue to Adding Ingress and Egress "
	"Rules to a Security Group."
	msgstr ""
	"Pour rendre le groupe de sécurité utile, continuez par Ajouter des règles "
	"Ingress et Egress à un groupe de sécurité."

	# 0a506fc7186b4a0c8a15ae463c4793e1
	#: ../../networking/security_groups.rst:81
	msgid "Security Groups in Advanced Zones (KVM Only)"
	msgstr "Groupes de sécurité dans les Zones Avancées (KVM uniquement)"

	# b2a6fb8be2384189ae73c2430ce94159
	#: ../../networking/security_groups.rst:83
	msgid ""
	"CloudStack provides the ability to use security groups to provide isolation "
	"between guests on a single shared, zone-wide network in an advanced zone "
	"where KVM is the hypervisor. Using security groups in advanced zones rather "
	"than multiple VLANs allows a greater range of options for setting up guest "
	"isolation in a cloud."
	msgstr ""

	# 180782afad3643f1ba9672b7f6da72b3
	#: ../../networking/security_groups.rst:91
	msgid "Limitations"
	msgstr "Limitations"

	# 133ba38a19484e2e9122631ab38446fa
	#: ../../networking/security_groups.rst:93
	msgid "The following are not supported for this feature:"
	msgstr ""
	"Les éléments suivants ne sont pas pris en charge pour cette fonctionnalité :"

	# 7c46f4b3ab9f405b8ba2b599ffc1985e
	#: ../../networking/security_groups.rst:95
	msgid ""
	"Two IP ranges with the same VLAN and different gateway or netmask in "
	"security group-enabled shared network."
	msgstr ""
	"Deux plages d'IP avec le même VLAN et une passerelle ou masque de réseau "
	"différent dans un réseau partagé avec groupes de sécurité."

	# 25d83dec92f045bda786a85257b3e1d1
	#: ../../networking/security_groups.rst:98
	msgid ""
	"Two IP ranges with the same VLAN and different gateway or netmask in "
	"account-specific shared networks."
	msgstr ""
	"Deux plages d'IP avec le même VLAN et une passerelle ou un masque de réseau "
	"différent dans des réseaux partagés spécifiques à un compte."

	# 529f72b64c464f0cbbe8b287e8258f1a
	#: ../../networking/security_groups.rst:101
	msgid "Multiple VLAN ranges in security group-enabled shared network."
	msgstr ""
	"Plusieurs plages de VLAN dans un réseau partagé avec groupes de sécurité."

	# c9ffb5f82e6b45778e4e1b83b29ed310
	#: ../../networking/security_groups.rst:103
	msgid "Multiple VLAN ranges in account-specific shared networks."
	msgstr ""
	"Plusieurs plages de VLAN dans des réseaux partagés spécifiques à un compte."

	# 8488c958047d450bb250b38d098bc214
	#: ../../networking/security_groups.rst:105
	msgid ""
	"Security groups must be enabled in the zone in order for this feature to be "
	"used."
	msgstr ""
	"Les groupes de sécurité doivent être activés dans la zone pour que cette "
	"fonctionnalité soit utilisée."

	# 6c5be222e8184b8ab28d3019648e9990
	#: ../../networking/security_groups.rst:110
	msgid "Enabling Security Groups"
	msgstr "Activer les groupes de sécurité."

	# b6b2af559254408ba42336e7fddf32e6
	#: ../../networking/security_groups.rst:112
	msgid ""
	"In order for security groups to function in a zone, the security groups "
	"feature must first be enabled for the zone. The administrator can do this "
	"when creating a new zone, by selecting a network offering that includes "
	"security groups. The procedure is described in Basic Zone Configuration in "
	"the Advanced Installation Guide. The administrator can not enable security "
	"groups for an existing zone, only when creating a new zone."
	msgstr ""

	# e09d51e1a259488eab79d1fb28954b59
	#: ../../networking/security_groups.rst:122
	msgid "Adding Ingress and Egress Rules to a Security Group"
	msgstr "Ajout de règles Ingress et Egress à un Groupe de Sécurité"

	# b24e5ca705b84ea4a6c0511ef2244936
	#: ../../networking/security_groups.rst:126
	msgid "In the left navigation, choose Network"
	msgstr "Dans la navigation à gauche, choisissez Réseau."

	# e6e52ad277a249ebb052f48c14687e98
	#: ../../networking/security_groups.rst:128
	msgid ""
	"In Select view, choose Security Groups, then click the security group you "
	"want."
	msgstr ""
	"Dans la liste de choix, choisir Groupes de sécurité puis cliquer sur le "
	"groupe de sécurité désiré."

	# 4563cb9609194e7b8bfe401fa3b6219e
	#: ../../networking/security_groups.rst:131
	msgid ""
	"To add an ingress rule, click the Ingress Rules tab and fill out the "
	"following fields to specify what network traffic is allowed into VM "
	"instances in this security group. If no ingress rules are specified, then "
	"no traffic will be allowed in, except for responses to any traffic that has "
	"been allowed out through an egress rule."
	msgstr ""

	# a4934e5b794b41469ff66677df530f64
	#: ../../networking/security_groups.rst:137
	msgid ""
	"Add by CIDR/Account. Indicate whether the source of the traffic will be "
	"defined by IP address (CIDR) or an existing security group in a CloudStack "
	"account (Account). Choose Account if you want to allow incoming traffic "
	"from all VMs in another security group"
	msgstr ""

	# 38c863d52b6c4f3b900f9268d71a3167
	#: ../../networking/security_groups.rst:143
	msgid ""
	"Protocol. The networking protocol that sources will use to send traffic "
	"to the security group. TCP and UDP are typically used for data exchange and "
	"end-user communications. ICMP is typically used to send error messages or "
	"network monitoring data."
	msgstr ""

	# bcb96d430c8649f483335f10c670e649
	#: ../../networking/security_groups.rst:148
	msgid ""
	"Start Port, End Port. (TCP, UDP only) A range of listening ports that "
	"are the destination for the incoming traffic. If you are opening a single "
	"port, use the same number in both fields."
	msgstr ""

	# 6c1ac4c3fb7e476a8eba891bbf1fa14e
	#: ../../networking/security_groups.rst:152
	msgid ""
	"ICMP Type, ICMP Code. (ICMP only) The type of message and error code "
	"that will be accepted."
	msgstr ""

	# 6d982263975e486e8e1b13fe56a83ed0
	#: ../../networking/security_groups.rst:155
	msgid ""
	"CIDR. (Add by CIDR only) To accept only traffic from IP addresses "
	"within a particular address block, enter a CIDR or a comma-separated list "
	"of CIDRs. The CIDR is the base IP address of the incoming traffic. For "
	"example, 192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0."
	msgstr ""

	# 10e7f63d3cf94152a51416bc737199ed
	#: ../../networking/security_groups.rst:161
	msgid ""
	"Account, Security Group. (Add by Account only) To accept only traffic "
	"from another security group, enter the CloudStack account and name of a "
	"security group that has already been defined in that account. To allow "
	"traffic between VMs within the security group you are editing now, enter "
	"the same name you used in step 7."
	msgstr ""

	# 9d70746377c24fdb80bdb73145dda1fe
	#: ../../networking/security_groups.rst:167
	msgid "The following example allows inbound HTTP access from anywhere:"
	msgstr ""
	"L'exemple qui suit autorise l'accès HTTP entrant depuis n'importe où :"

	# f1fa895a70e745a182f076db946d9d16
	#: ../../networking/security_groups.rst:169
	msgid "\|httpaccess.png\|"
	msgstr "\|httpaccess.png\|"

	# 25c1f9eee689482ab0a99049e45c6ceb
	#: ../../networking/security_groups.rst:171
	msgid ""
	"To add an egress rule, click the Egress Rules tab and fill out the "
	"following fields to specify what type of traffic is allowed to be sent out "
	"of VM instances in this security group. If no egress rules are specified, "
	"then all traffic will be allowed out. Once egress rules are specified, the "
	"following types of traffic are allowed out: traffic specified in egress "
	"rules; queries to DNS and DHCP servers; and responses to any traffic that "
	"has been allowed in through an ingress rule"
	msgstr ""

	# 83bfb97418d545549c3ea5c0a17c5985
	#: ../../networking/security_groups.rst:180
	msgid ""
	"Add by CIDR/Account. Indicate whether the destination of the traffic "
	"will be defined by IP address (CIDR) or an existing security group in a "
	"CloudStack account (Account). Choose Account if you want to allow outgoing "
	"traffic to all VMs in another security group."
	msgstr ""

	# f175b78e34494795b301760a7fd5168f
	#: ../../networking/security_groups.rst:186
	msgid ""
	"Protocol. The networking protocol that VMs will use to send outgoing "
	"traffic. TCP and UDP are typically used for data exchange and end-user "
	"communications. ICMP is typically used to send error messages or network "
	"monitoring data."
	msgstr ""

	# 31089018bb9f47e4941651c91b2bd90c
	#: ../../networking/security_groups.rst:191
	msgid ""
	"Start Port, End Port. (TCP, UDP only) A range of listening ports that "
	"are the destination for the outgoing traffic. If you are opening a single "
	"port, use the same number in both fields."
	msgstr ""

	# 96661f61b9b54d448e5e7be7ba933296
	#: ../../networking/security_groups.rst:195
	msgid ""
	"ICMP Type, ICMP Code. (ICMP only) The type of message and error code "
	"that will be sent"
	msgstr ""

	# 7e52dd9e52524ea98f0bcf7ff00116ac
	#: ../../networking/security_groups.rst:198
	msgid ""
	"CIDR. (Add by CIDR only) To send traffic only to IP addresses within a "
	"particular address block, enter a CIDR or a comma-separated list of CIDRs. "
	"The CIDR is the base IP address of the destination. For example, "
	"192.168.0.0/22. To allow all CIDRs, set to 0.0.0.0/0."
	msgstr ""

	# 40e0b1515ef948adb1a42642f73f490d
	#: ../../networking/security_groups.rst:204
	msgid ""
	"Account, Security Group. (Add by Account only) To allow traffic to be "
	"sent to another security group, enter the CloudStack account and name of a "
	"security group that has already been defined in that account. To allow "
	"traffic between VMs within the security group you are editing now, enter "
	"its name."
	msgstr ""

	# 39febf06883a4d248d1ac5ad19510065
	#: ../../networking/security_groups.rst:210
	msgid "Click Add."
	msgstr "Cliquer sur Ajouter."