| # This file has been modified by ./apt-proxy-to-apt-cacher |
| # Some lines may have been appended at the bottom of this file |
| # This file has been modified by /usr/share/apt-cacher/apt-proxy-to-apt-cacher |
| # Some lines may have been appended at the bottom of this file |
| ################################################################# |
| # This is the config file for apt-cacher. On most Debian systems |
| # you can safely leave the defaults alone. |
| ################################################################# |
| |
| # cache_dir is used to set the location of the local cache. This can |
| # become quite large, so make sure it is somewhere with plenty of space. |
| cache_dir=/var/cache/apt-cacher |
| |
| # The email address of the administrator is displayed in the info page |
| # and traffic reports. |
| admin_email=root@localhost |
| |
| # For the daemon startup settings please edit the file /etc/default/apt-cacher. |
| |
| # Daemon port setting, only useful in stand-alone mode. You need to run the |
| # daemon as root to use privileged ports (<1024). |
| daemon_port = 3142 |
| |
| # optional settings, user and group to run the daemon as. Make sure they have |
| # sufficient permissions on the cache and log directories. Comment the settings |
| # to run apt-cacher as the native user. |
| group=www-data |
| user=www-data |
| |
| # optional setting, binds the listening daemon to one specified IP. Use IP |
| # ranges for more advanced configuration, see below. |
| # daemon_addr=localhost |
| |
| # If your apt-cacher machine is directly exposed to the Internet and you are |
| # worried about unauthorised machines fetching packages through it, you can |
| # specify a list of IPv4 addresses which are allowed to use it and another |
| # list of IPv4 addresses which aren't. |
| # Localhost (127.0.0.1) is always allowed. Other addresses must be matched |
| # by allowed_hosts and not by denied_hosts to be permitted to use the cache. |
| # Setting allowed_hosts to "*" means "allow all". |
| # Otherwise the format is a comma-separated list containing addresses, |
| # optionally with masks (like 10.0.0.0/22), or ranges of addresses (two |
| # addresses separated by a hyphen, no masks, like '192.168.0.3-192.168.0.56'). |
| allowed_hosts=* |
| denied_hosts= |
| |
| # And similiarly for IPv6 with allowed_hosts_6 and denied_hosts_6. |
| # Note that IPv4-mapped IPv6 addresses (::ffff:w.x.y.z) are truncated to |
| # w.x.y.z and are handled as IPv4. |
| allowed_hosts_6=fec0::/16 |
| denied_hosts_6= |
| |
| # This thing can be done by Apache but is much simplier here - limit access to |
| # Debian mirrors based on server names in the URLs |
| #allowed_locations=ftp.uni-kl.de,ftp.nerim.net,debian.tu-bs.de |
| |
| # Apt-cacher can generate usage reports every 24 hours if you set this |
| # directive to 1. You can view the reports in a web browser by pointing |
| # to your cache machine with '/apt-cacher/report' on the end, like this: |
| # http://yourcache.example.com/apt-cacher/report |
| # Generating reports is very fast even with many thousands of logfile |
| # lines, so you can safely turn this on without creating much |
| # additional system load. |
| generate_reports=1 |
| |
| # Apt-cacher can clean up its cache directory every 24 hours if you set |
| # this directive to 1. Cleaning the cache can take some time to run |
| # (generally in the order of a few minutes) and removes all package |
| # files that are not mentioned in any existing 'Packages' lists. This |
| # has the effect of deleting packages that have been superseded by an |
| # updated 'Packages' list. |
| clean_cache=1 |
| |
| # The directory to use for apt-cacher access and error logs. |
| # The access log records every request in the format: |
| # date-time|client ip address|HIT/MISS/EXPIRED|object size|object name |
| # The error log is slightly more free-form, and is also used for debug |
| # messages if debug mode is turned on. |
| # Note that the old 'logfile' and 'errorfile' directives are |
| # deprecated: if you set them explicitly they will be honoured, but it's |
| # better to just get rid of them from old config files. |
| logdir=/var/log/apt-cacher |
| |
| # apt-cacher can use different methods to decide whether package lists need to |
| # be updated, |
| # A) looking at the age of the cached files |
| # B) getting HTTP header from server and comparing that with cached data. This |
| # method is more reliable and avoids desynchronisation of data and index files |
| # but needs to transfer few bytes from the server every time somebody requests |
| # the files ("apt-get update") |
| # Set the following value to the maximum age (in hours) for method A or to 0 |
| # for method B |
| expire_hours=0 |
| |
| # Apt-cacher can pass all its requests to an external http proxy like |
| # Squid, which could be very useful if you are using an ISP that blocks |
| # port 80 and requires all web traffic to go through its proxy. The |
| # format is 'hostname:port', eg: 'proxy.example.com:8080'. |
| http_proxy=proxy.example.com:8080 |
| |
| # Use of an external proxy can be turned on or off with this flag. |
| # Value should be either 0 (off) or 1 (on). |
| use_proxy=0 |
| |
| # External http proxy sometimes need authentication to get full access. The |
| # format is 'username:password'. |
| http_proxy_auth=proxyuser:proxypass |
| |
| # Use of external proxy authentication can be turned on or off with this flag. |
| # Value should be either 0 (off) or 1 (on). |
| use_proxy_auth=0 |
| |
| # Rate limiting sets the maximum bandwidth in bytes per second to use |
| # for fetching packages. Syntax is fully defined in 'man wget'. |
| # Use 'k' or 'm' to use kilobits or megabits / second: eg, 'limit=25k'. |
| # Use 0 or a negative value for no rate limiting. |
| limit=0 |
| |
| # Debug mode makes apt-cacher spew a lot of extra debug junk to the |
| # error log (whose location is defined with the 'logdir' directive). |
| # Leave this off unless you need it, or your error log will get very |
| # big. Acceptable values are 0 or 1. |
| debug=0 |
| |
| # Adapt the line in the usage info web page to match your server configuration |
| # example_sources_line=deb http://<b>my.cacher.server:3142/</b>ftp.au.debian.org/debian unstable main contrib non-free |
| |
| # Print a 410 (Gone) HTTP message with the specified text when accessed via |
| # CGI. Useful to tell users to adapt their sources.list files when the |
| # apt-cacher server is beeing relocated (via apt-get's error messages while |
| # running "update") |
| #cgi_advise_to_use = Please use http://cacheserver:3142/ as apt-cacher access URL |
| #cgi_advise_to_use = Server relocated. To change sources.list, run perl -pe "s,/apt-cacher\??,:3142," -i /etc/apt/sources.list |
| |
| # Server mapping - this allows to hide real server names behind virtual paths |
| # that appear in the access URL. This method is known from apt-proxy. This is |
| # also the only method to use FTP access to the target hosts. The syntax is simple, the part of the beginning to replace, followed by a list of mirror urls, all space separated. Multiple profile are separated by semicolons |
| # path_map = debian ftp.uni-kl.de/pub/linux/debian ftp2.de.debian.org/debian ; ubuntu archive.ubuntu.com/ubuntu ; security security.debian.org/debian-security ftp2.de.debian.org/debian-security |
| # Note that you need to specify all target servers in the allowed_locations |
| # options if you make use of it. Also note that the paths should not overlap |
| # each other. FTP access method not supported yet, maybe in the future. |
| |
| # extra setting from apt-proxy configuration |
| path_map = ubuntu us.archive.ubuntu.com/ubuntu ; ubuntu-security security.ubuntu.com/ubuntu ; debian debian.osuosl.org/debian/ ; security security.debian.org/debian-security |