| table_id: Table 6hrPlev |
| modeling_realm: atmos |
| |
| frequency: 6hr |
| |
| cmor_version: 2.5.0 ! minimum version of CMOR that can read this table |
| cf_version: 1.4 ! version of CF that output conforms to |
| project_id: CMIP5 ! project id |
| table_date: 06 January 2011 ! date this table was constructed |
| |
| missing_value: 1.e20 ! value used to indicate a missing value |
| ! in arrays output by netCDF as 32-bit IEEE |
| ! floating-point numbers (float or real) |
| |
| baseURL: http://cmip-pcmdi.llnl.gov/CMIP5/dataLocation |
| product: output |
| |
| required_global_attributes: creation_date tracking_id forcing model_id parent_experiment_id parent_experiment_rip branch_time contact institute_id ! space separated required global attribute |
| |
| forcings: N/A Nat Ant GHG SD SI SA TO SO Oz LU Sl Vl SS Ds BC MD OC AA |
| |
| expt_id_ok: '10- or 30-year run initialized in year XXXX' 'decadalXXXX' |
| expt_id_ok: 'volcano-free hindcast initialized in year XXXX' 'noVolcXXXX' |
| expt_id_ok: 'prediction with 2010 volcano' 'volcIn2010' |
| expt_id_ok: 'pre-industrial control' 'piControl' |
| expt_id_ok: 'historical' 'historical' |
| expt_id_ok: 'historical extension' 'historicalExt' |
| expt_id_ok: 'mid-Holocene' 'midHolocene' |
| expt_id_ok: 'last glacial maximum' 'lgm' |
| expt_id_ok: 'last millennium' 'past1000' |
| expt_id_ok: 'RCP4.5' 'rcp45' |
| expt_id_ok: 'RCP8.5' 'rcp85' |
| expt_id_ok: 'RCP2.6' 'rcp26' |
| expt_id_ok: 'RCP6' 'rcp60' |
| expt_id_ok: 'ESM pre-industrial control' 'esmControl' |
| expt_id_ok: 'ESM historical' 'esmHistorical' |
| expt_id_ok: 'ESM RCP8.5' 'esmrcp85' |
| expt_id_ok: 'ESM fixed climate 1' 'esmFixClim1' |
| expt_id_ok: 'ESM fixed climate 2' 'esmFixClim2' |
| expt_id_ok: 'ESM feedback 1' 'esmFdbk1' |
| expt_id_ok: 'ESM feedback 2' 'esmFdbk2' |
| expt_id_ok: '1 percent per year CO2' '1pctCO2' |
| expt_id_ok: 'abrupt 4XCO2' 'abrupt4xCO2' |
| expt_id_ok: 'natural-only' 'historicalNat' |
| expt_id_ok: 'GHG-only' 'historicalGHG' |
| expt_id_ok: 'AMIP' 'amip' |
| expt_id_ok: '2030 time-slice' 'sst2030' |
| expt_id_ok: 'control SST climatology' 'sstClim' |
| expt_id_ok: 'CO2 forcing' 'sstClim4xCO2' |
| expt_id_ok: 'all aerosol forcing' 'sstClimAerosol' |
| expt_id_ok: 'sulfate aerosol forcing' 'sstClimSulfate' |
| expt_id_ok: '4xCO2 AMIP' 'amip4xCO2' |
| expt_id_ok: 'AMIP plus patterned anomaly' 'amipFuture' |
| expt_id_ok: 'aqua planet control' 'aquaControl' |
| expt_id_ok: '4xCO2 aqua planet' 'aqua4xCO2' |
| expt_id_ok: 'aqua planet plus 4K anomaly' 'aqua4K' |
| expt_id_ok: 'AMIP plus 4K anomaly' 'amip4K' |
| |
| |
| approx_interval: 0.250000 ! approximate spacing between successive time |
| ! samples (in units of the output time |
| ! coordinate. |
| |
| !============ |
| axis_entry: longitude |
| !============ |
| !---------------------------------- |
| ! Axis attributes: |
| !---------------------------------- |
| standard_name: longitude |
| units: degrees_east |
| axis: X ! X, Y, Z, T (default: undeclared) |
| long_name: longitude |
| !---------------------------------- |
| ! Additional axis information: |
| !---------------------------------- |
| out_name: lon |
| valid_min: 0.0 |
| valid_max: 360.0 |
| stored_direction: increasing |
| type: double |
| must_have_bounds: yes |
| !---------------------------------- |
| ! |
| |
| |
| !============ |
| axis_entry: latitude |
| !============ |
| !---------------------------------- |
| ! Axis attributes: |
| !---------------------------------- |
| standard_name: latitude |
| units: degrees_north |
| axis: Y ! X, Y, Z, T (default: undeclared) |
| long_name: latitude |
| !---------------------------------- |
| ! Additional axis information: |
| !---------------------------------- |
| out_name: lat |
| valid_min: -90.0 |
| valid_max: 90.0 |
| stored_direction: increasing |
| type: double |
| must_have_bounds: yes |
| !---------------------------------- |
| ! |
| |
| |
| !============ |
| axis_entry: plev3 |
| !============ |
| !---------------------------------- |
| ! Axis attributes: |
| !---------------------------------- |
| standard_name: air_pressure |
| units: Pa |
| axis: Z ! X, Y, Z, T (default: undeclared) |
| positive: down ! up or down (default: undeclared) |
| long_name: pressure |
| !---------------------------------- |
| ! Additional axis information: |
| !---------------------------------- |
| out_name: plev |
| stored_direction: decreasing |
| tolerance: 0.001 |
| type: double |
| requested: 85000. 50000. 25000. ! space-separated list of requested coordinates |
| must_have_bounds: no |
| !---------------------------------- |
| ! |
| |
| |
| !============ |
| axis_entry: time1 |
| !============ |
| !---------------------------------- |
| ! Axis attributes: |
| !---------------------------------- |
| standard_name: time |
| units: days since ? |
| axis: T ! X, Y, Z, T (default: undeclared) |
| long_name: time |
| !---------------------------------- |
| ! Additional axis information: |
| !---------------------------------- |
| out_name: time |
| stored_direction: increasing |
| type: double |
| must_have_bounds: no |
| !---------------------------------- |
| ! |
| |
| !============ |
| variable_entry: ua |
| !============ |
| modeling_realm: atmos |
| !---------------------------------- |
| ! Variable attributes: |
| !---------------------------------- |
| standard_name: eastward_wind |
| units: m s-1 |
| long_name: Eastward Wind |
| !---------------------------------- |
| ! Additional variable information: |
| !---------------------------------- |
| dimensions: longitude latitude plev3 time1 |
| out_name: ua |
| type: real |
| valid_min: -90.0 |
| valid_max: 145.0 |
| !---------------------------------- |
| ! |
| |
| !============ |
| variable_entry: va |
| !============ |
| modeling_realm: atmos |
| !---------------------------------- |
| ! Variable attributes: |
| !---------------------------------- |
| standard_name: northward_wind |
| units: m s-1 |
| long_name: Northward Wind |
| !---------------------------------- |
| ! Additional variable information: |
| !---------------------------------- |
| dimensions: longitude latitude plev3 time1 |
| out_name: va |
| type: real |
| valid_min: -80.0 |
| valid_max: 80.0 |
| !---------------------------------- |
| ! |
| |
| !============ |
| variable_entry: ta |
| !============ |
| modeling_realm: atmos |
| !---------------------------------- |
| ! Variable attributes: |
| !---------------------------------- |
| standard_name: air_temperature |
| units: K |
| cell_measures: area: areacella |
| long_name: Air Temperature |
| !---------------------------------- |
| ! Additional variable information: |
| !---------------------------------- |
| dimensions: longitude latitude plev3 time1 |
| out_name: ta |
| type: real |
| valid_min: 144.0 |
| valid_max: 330.0 |
| !---------------------------------- |
| ! |
| |
| !============ |
| variable_entry: psl |
| !============ |
| modeling_realm: atmos |
| !---------------------------------- |
| ! Variable attributes: |
| !---------------------------------- |
| standard_name: air_pressure_at_sea_level |
| units: Pa |
| cell_measures: area: areacella |
| long_name: Sea Level Pressure |
| !---------------------------------- |
| ! Additional variable information: |
| !---------------------------------- |
| dimensions: longitude latitude time1 |
| out_name: psl |
| type: real |
| valid_min: 92500.0 |
| valid_max: 113000.0 |
| !---------------------------------- |
| ! |
| |