| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| |
| # Celix android builder |
| # |
| # Howto: |
| # |
| # Build docker image -> docker build -t celix-android-builder - < Dockerfile.Android |
| # Run docker image -> docker run --name builder celix-android-builder |
| # Extract filesystem -> docker export builder > fs.tar |
| # Extract /build dir from tar -> tar xf fs.tar build/output/celix |
| # |
| # |
| |
| FROM ubuntu:14.04 |
| MAINTAINER Bjoern Petri <bjoern.petri@sundevil.de> |
| |
| ENV ARCH armv7 |
| ENV PLATFORM android-18 |
| ENV ANDROID_STANDALONE_TOOLCHAIN /build/toolchain-arm |
| ENV ANDROID_CMAKE_HOME /build/resources/android-cmake |
| ENV SYSROOT $ANDROID_STANDALONE_TOOLCHAIN/sysroot |
| ENV PATH $ANDROID_STANDALONE_TOOLCHAIN/bin:$ANDROID_STANDALONE_TOOLCHAIN/usr/local/bin:$PATH |
| ENV PATH $PATH:/build/resources/android-ndk-r10e |
| ENV CROSS_COMPILE arm-linux-androideabi |
| ENV CC arm-linux-androideabi-gcc |
| ENV CCX arm-linux-androideabi-g++ |
| ENV AR arm-linux-androideabi-ar |
| ENV AS arm-linux-androideabi-as |
| ENV LD arm-linux-androideabi-ld |
| ENV RANLIB arm-linux-androideabi-ranlib |
| ENV NM arm-linux-androideabi-nm |
| ENV STRIP arm-linux-androideabi-strip |
| ENV CHOST arm-linux-androideabi |
| |
| # install needed tools |
| |
| RUN apt-get update && apt-get install -y software-properties-common && add-apt-repository ppa:george-edison55/cmake-3.x && apt-get clean |
| |
| RUN apt-get update && apt-get install -y \ |
| automake \ |
| build-essential \ |
| wget \ |
| p7zip-full \ |
| bash \ |
| curl \ |
| cmake \ |
| git \ |
| vim \ |
| && apt-get clean |
| |
| |
| RUN mkdir -p build/output |
| |
| WORKDIR /build/resources |
| |
| |
| # Extracting ndk/sdk |
| # create standalone toolchain |
| RUN curl -L -O http://dl.google.com/android/ndk/android-ndk-r10e-linux-x86_64.bin && \ |
| chmod a+x android-ndk-r10e-linux-x86_64.bin && \ |
| 7z x android-ndk-r10e-linux-x86_64.bin > /dev/null && \ |
| bash android-ndk-r10e/build/tools/make-standalone-toolchain.sh --verbose --platform=$PLATFORM --install-dir=$ANDROID_STANDALONE_TOOLCHAIN --arch=arm --toolchain=arm-linux-androideabi-4.9 --system=linux-x86_64 |
| |
| |
| |
| # uuid |
| RUN curl -L -O http://downloads.sourceforge.net/libuuid/libuuid-1.0.3.tar.gz && \ |
| tar -xvzf libuuid-1.0.3.tar.gz && \ |
| cd libuuid-1.0.3 && \ |
| ./configure --host=arm-linux-androideabi --disable-shared --enable-static --prefix=/build/output/uuid && \ |
| make && make install |
| |
| |
| # zlib |
| RUN curl -L -O http://zlib.net/zlib-1.2.8.tar.gz && \ |
| tar -xvzf zlib-1.2.8.tar.gz && \ |
| cd zlib-1.2.8 && \ |
| ./configure --prefix=/build/output/zlib && make && make install |
| |
| # curl |
| RUN curl -L -O http://curl.haxx.se/download/curl-7.38.0.tar.gz && \ |
| tar -xvzf curl-7.38.0.tar.gz && \ |
| cd curl-7.38.0 && \ |
| ./configure --host=arm-linux-androideabi --disable-shared --enable-static --disable-dependency-tracking --with-zlib=`pwd`/../../output/zlib --without-ca-bundle --without-ca-path --disable-ftp --disable-file --disable-ldap --disable-ldaps --disable-rtsp --disable-proxy --disable-dict --disable-telnet --disable-tftp --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-sspi --disable-manual --target=arm-linux-androideabi --build=x86_64-unknown-linux-gnu --prefix=/build/output/curl && \ |
| make && make install |
| |
| # jansson |
| RUN curl -L -O http://www.digip.org/jansson/releases/jansson-2.7.tar.bz2 && \ |
| tar -xvjf jansson-2.7.tar.bz2 && \ |
| cd jansson-2.7 && ./configure --host=arm-linux-androideabi --disable-shared --enable-static --prefix=/build/output/jansson && \ |
| make && make install |
| |
| |
| # libmxl2 |
| RUN curl -L -O http://xmlsoft.org/sources/libxml2-2.7.2.tar.gz && \ |
| curl -L -O https://raw.githubusercontent.com/bpetri/libxml2_android/master/config.guess && \ |
| curl -L -O https://raw.githubusercontent.com/bpetri/libxml2_android/master/config.sub && \ |
| curl -L -O https://raw.githubusercontent.com/bpetri/libxml2_android/master/libxml2.patch && \ |
| tar -xvzf libxml2-2.7.2.tar.gz && cp config.guess config.sub libxml2-2.7.2 && \ |
| patch -p1 < libxml2.patch && \ |
| cd libxml2-2.7.2 && \ |
| ./configure --host=arm-linux-androideabi --disable-shared --enable-static --prefix=/build/output/libxml2 && \ |
| make && make install |
| |
| |
| # libffi |
| RUN curl -L -O ftp://sourceware.org/pub/libffi/libffi-3.2.1.tar.gz && \ |
| tar -xvzf libffi-3.2.1.tar.gz && \ |
| cd libffi-3.2.1 && ./configure --host=arm-linux-androideabi --disable-shared --enable-static --prefix=/build/output/libffi && \ |
| echo "#define FFI_MMAP_EXEC_WRIT 1" >> ./arm-unknown-linux-androideabi/fficonfig.h && \ |
| echo "#define FFI_MMAP_EXEC_SELINUX 0" >> ./arm-unknown-linux-androideabi/fficonfig.h && \ |
| make && make install |
| |
| |
| # finally add celix src |
| |
| RUN git clone -b develop --single-branch https://github.com/apache/celix.git celix |
| |
| CMD mkdir -p celix/build-android && cd celix/build-android && cmake -DANDROID=TRUE -DENABLE_TESTING=OFF -DBUILD_EXAMPLES=OFF -DBUILD_DEPENDENCY_MANAGER_CXX=OFF -DBUILD_REMOTE_SERVICE_ADMIN=ON -DBUILD_REMOTE_SHELL=ON -DBUILD_RSA_DISCOVERY_CONFIGURED=ON -DBUILD_RSA_DISCOVERY_ETCD=ON -DBUILD_RSA_EXAMPLES=ON -DBUILD_RSA_REMOTE_SERVICE_ADMIN_HTTP=ON -DBUILD_RSA_REMOTE_SERVICE_ADMIN_DFI=OFF -DBUILD_RSA_TOPOLOGY_MANAGER=ON -DFFI_LIBRARY=/build/output/libffi/lib/libffi.a -DFFI_INCLUDE_DIR=/build/output/libffi/lib/libffi-3.2.1/include -DJANSSON_LIBRARY=/build/output/jansson/lib/libjansson.a -DJANSSON_INCLUDE_DIR=/build/output/jansson/include -DCURL_LIBRARY=/build/output/curl/lib/libcurl.a -DCURL_INCLUDE_DIR=/build/output/curl/include -DLIBXML2_LIBRARIES=/build/output/libxml2/lib/libxml2.a -DLIBXML2_INCLUDE_DIR=/build/output/libxml2/include/libxml2 -DZLIB_LIBRARY=/build/output/zlib/lib/libz.a -DZLIB_INCLUDE_DIR=/build/output/zlib/include -DUUID_LIBRARY=/build/output/uuid/lib/libuuid.a -DUUID_INCLUDE_DIR=/build/output/uuid/include -DCMAKE_INSTALL_PREFIX:PATH=/build/output/celix .. && make && make install |
| |
| # done |
