| <# |
| Licensed to the Apache Software Foundation (ASF) under one |
| or more contributor license agreements. See the NOTICE file |
| distributed with this work for additional information |
| regarding copyright ownership. The ASF licenses this file |
| to you under the Apache License, Version 2.0 (the |
| "License"); you may not use this file except in compliance |
| with the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| #> |
| |
| Function Get-Commit-Sha { |
| return $($Env:APPVEYOR_REPO_COMMIT.SubString(0,7)) |
| } |
| |
| Function Get-OpenSSL-Version { |
| $openssl_version = "$($(Get-ChildItem Env:"OPENSSL_$($Env:OPENSSL_MAJOR_MINOR.Replace(".", "_"))_VERSION").Value)" |
| return $openssl_version |
| } |
| |
| Function Bison-Version-Information { |
| If (Get-Command "bison" -ErrorAction SilentlyContinue) { |
| $temporary_file = New-TemporaryFile |
| Start-Process -FilePath bison -ArgumentList "--version" -RedirectStandardOutput $($temporary_file) -Wait -NoNewWindow |
| $output = Get-Content "$($temporary_file)" -Raw |
| Write-Host "$($output.Trim())" -BackgroundColor DarkCyan |
| Remove-Item $temporary_file |
| } Else { |
| Write-Host "Bison is not available" -BackgroundColor DarkRed |
| } |
| } |
| |
| Function Perl-Version-Information { |
| If (Get-Command "perl" -ErrorAction SilentlyContinue) { |
| $temporary_file = New-TemporaryFile |
| Start-Process -FilePath perl -ArgumentList "--version" -RedirectStandardOutput $($temporary_file) -Wait -NoNewWindow |
| $output = Get-Content "$($temporary_file)" -Raw |
| Write-Host "$($output.Trim())" -BackgroundColor DarkGray |
| Remove-Item $temporary_file |
| } Else { |
| Write-Host "Perl is not available" -BackgroundColor DarkRed |
| } |
| } |
| |
| Function CMake-Version-Information { |
| If (Get-Command "cmake" -ErrorAction SilentlyContinue) { |
| $temporary_file = New-TemporaryFile |
| Start-Process -FilePath cmake -ArgumentList "--version" -RedirectStandardOutput $($temporary_file) -Wait -NoNewWindow |
| $output = Get-Content "$($temporary_file)" -Raw |
| Write-Host "$($output.Trim())" -BackgroundColor DarkBlue |
| Remove-Item $temporary_file |
| } Else { |
| Write-Host "CMake is not available" -BackgroundColor DarkRed |
| } |
| } |
| |
| Function Build-Configuration-Information { |
| $output = @" |
| Visual Studio: $($Env:CMAKE_GENERATOR.Split(" ")[-2]) [$($Env:CMAKE_GENERATOR.Split(" ")[-1])] |
| Architecture: $($Env:Platform) |
| libssh2: v$($Env:LIBSSH2_VERSION) |
| libuv: v$($Env:LIBUV_VERSION) |
| OpenSSL: v$(Get-OpenSSL-Version) |
| zlib: v$($Env:ZLIB_VERSION) |
| Build Number: $($Env:APPVEYOR_BUILD_NUMBER) |
| Branch: $($Env:APPVEYOR_REPO_BRANCH) |
| SHA: $(Get-Commit-Sha) |
| "@ |
| Write-Host "$($output)" -BackgroundColor DarkGreen |
| } |
| |
| Function Hardware-Information { |
| $computer_system = Get-CimInstance CIM_ComputerSystem |
| $operating_system = Get-CimInstance CIM_OperatingSystem |
| $processor = Get-CimInstance CIM_Processor |
| $logical_disk = Get-CimInstance Win32_LogicalDisk -Filter "DeviceID = 'C:'" |
| $capacity = "{0:N2}" -f ($logical_disk.Size / 1GB) |
| $free_space = "{0:N2}" -f ($logical_disk.FreeSpace / 1GB) |
| $free_space_percentage = "{0:P2}" -f ($logical_disk.FreeSpace / $logical_disk.Size) |
| $ram = "{0:N2}" -f ($computer_system.TotalPhysicalMemory / 1GB) |
| |
| # Determine if hyper-threading is enabled in order to display number of cores |
| $number_of_cores = "$($processor.NumberOfCores)" |
| If ($processor.NumberOfCores -lt $processor.NumberOfLogicalProcessors) { |
| $number_of_cores = "$($processor.NumberOfLogicalProcessors) (Hyper-Threading)" |
| } |
| |
| $hardware_information = @" |
| Hardware Information for $($computer_system.Name): |
| Operating System: $($operating_system.caption) (Version: $($operating_system.Version)) |
| CPU: $($processor.Name) |
| Number of Cores: $($number_of_cores) |
| HDD Capacity: $($capacity) GB |
| HDD Free Capacity: $($free_space_percentage) ($($free_space) GB) |
| RAM: $($ram) GB |
| "@ |
| Write-Host "$($hardware_information)" -BackgroundColor DarkMagenta |
| } |
| |
| Function Environment-Information { |
| Write-Host "Visual Studio Environment Variables:" -BackgroundColor DarkMagenta |
| Get-ChildItem Env:VS* | ForEach-Object { |
| Write-Host " $($_.Name) = $($_.Value)" -BackgroundColor DarkMagenta |
| } |
| } |
| |
| Function Initialize-Build-Environment { |
| # Get the versions for the third party dependencies |
| $libssh2_version = $Env:LIBSSH2_VERSION |
| $libuv_version = $Env:LIBUV_VERSION |
| $openssl_version = Get-OpenSSL-Version |
| $Env:OPENSSL_VERSION = $openssl_version |
| $zlib_version = $Env:ZLIB_VERSION |
| $kerberos_version = "4.1" |
| $bison_version = "2.4.1" |
| $perl_version = "5.26.2.1" |
| |
| # Determine the platform and create associate environment variables |
| $Env:CMAKE_PLATFORM = $Env:Platform |
| $lib_architecture = "lib64" |
| $windows_architecture = "win64" |
| |
| # Determine which header file to use for determine driver version |
| $driver_header_file = "cassandra.h" |
| $driver_archive_prefix = "cassandra" |
| If ($Env:DRIVER_TYPE -Like "dse") { |
| $driver_header_file = "dse.h" |
| $driver_archive_prefix = "dse" |
| } |
| |
| # Get the driver version number from the header file |
| $version = @() |
| Get-Content "$($Env:APPVEYOR_BUILD_FOLDER)/include/$($driver_header_file)" | ForEach-Object { |
| If ($_ -Match "#define .*_VERSION_.*") { |
| $token = $_.Split(" ")[-1].Replace("`"", "") |
| If ($token) { |
| $version += , $token |
| } |
| } |
| } |
| $Env:DRIVER_VERSION = "$($version[0]).$($version[1]).$($version[2])" |
| If ($version.Length -eq 4) { |
| $Env:DRIVER_VERSION += "-$($version[3])" |
| } |
| |
| # Generate the variables for use with third party dependencies |
| $bin_location_prefix = "C:/projects/dependencies/bin/" |
| $libs_location_prefix = "C:/projects/dependencies/libs/" |
| $dependencies_location_prefix = "$($libs_location_prefix)/$($Env:Platform)/$($Env:VISUAL_STUDIO_INTERNAL_VERSION)/" |
| $download_url_prefix = "https://raw.githubusercontent.com/mikefero/cpp-driver-msvc-libs/master" |
| |
| # Generate the environment variables for use with the CMake FindXXX scripts |
| $Env:LIBUV_ROOT_DIR = "$($dependencies_location_prefix)/libuv-$($libuv_version)" |
| $Env:OPENSSL_BASE_DIR = "$($dependencies_location_prefix)/openssl-$($openssl_version)" |
| $Env:OPENSSL_ROOT_DIR = "$($Env:OPENSSL_BASE_DIR)/shared" |
| $Env:ZLIB_ROOT_DIR = "$($dependencies_location_prefix)/zlib-$($zlib_version)" |
| $Env:DRIVER_INSTALL_DIR = "C:/projects/driver/lib" |
| $Env:DRIVER_ARTIFACTS_DIR = "C:/projects/driver/artifacts" |
| $Env:DRIVER_ARTIFACTS_LOGS_DIR = "$($Env:DRIVER_ARTIFACTS_DIR)/logs" |
| |
| # Generate the environment variables for the third party archives |
| $Env:KERBEROS_ARCHIVE = "kfw-$($kerberos_version)-$($windows_architecture)-msvc100.zip" |
| $Env:LIBUV_ARTIFACT_ARCHIVE = "libuv-$($libuv_version)-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| $Env:OPENSSL_ARTIFACT_ARCHIVE = "openssl-$($openssl_version)-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| $Env:ZLIB_ARTIFACT_ARCHIVE = "zlib-$($zlib_version)-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| |
| # Generate default environment variables for per commit builds |
| If ($Env:APPVEYOR_BUILD_WORKER_IMAGE -Like "Visual Studio 2019") { |
| $boost_version_directory_suffix = "1_71_0" |
| } Else { |
| $boost_version_directory_suffix = "1_69_0" |
| } |
| $visual_studio_version = "$($Env:VISUAL_STUDIO_INTERNAL_VERSION.Insert(2, "."))" |
| |
| # Generate the default Boost environment variables |
| $Env:BOOST_ROOT = "C:/Libraries/boost_$($boost_version_directory_suffix)" |
| $Env:BOOST_INCLUDEDIR = "$($Env:BOOST_ROOT)/include" |
| |
| # Generate the Kerberos environment variables |
| $Env:KERBEROS_DOWNLOAD_URL = "$($download_url_prefix)/kerberos/$($kerberos_version)/$($Env:KERBEROS_ARCHIVE)" |
| $Env:KERBEROS_EXTRACT_DIR = "$($libs_location_prefix)/$($Env:Platform)/100/kfw-$($kerberos_version)" |
| $Env:KERBEROS_ROOT_DIR = "$($Env:KERBEROS_EXTRACT_DIR)/MIT/Kerberos" |
| |
| # Generate the default libssh2 environment variables |
| $Env:LIBSSH2_ROOT_DIR = "$($dependencies_location_prefix)/libssh2-$($libssh2_version)" |
| |
| # Generate the archive name for the driver test and examples artifacts |
| $build_version = "$($Env:APPVEYOR_BUILD_NUMBER)-$($Env:APPVEYOR_REPO_BRANCH)" |
| # TODO: Re-enable OpenSSL version appending if multiple OpenSSL versions are enabled |
| #$Env:DRIVER_ARTIFACT_EXAMPLES_ARCHIVE = "$($driver_archive_prefix)-cpp-driver-$($Env:DRIVER_VERSION)-examples-openssl-$($Env:OPENSSL_MAJOR_MINOR)-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| #$Env:DRIVER_ARTIFACT_TESTS_ARCHIVE = "$($driver_archive_prefix)-cpp-driver-$($Env:DRIVER_VERSION)-tests-openssl-$($Env:OPENSSL_MAJOR_MINOR)-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| $Env:DRIVER_ARTIFACT_EXAMPLES_ARCHIVE = "$($driver_archive_prefix)-cpp-driver-$($Env:DRIVER_VERSION)-examples-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| $Env:DRIVER_ARTIFACT_TESTS_ARCHIVE = "$($driver_archive_prefix)-cpp-driver-$($Env:DRIVER_VERSION)-tests-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| |
| # Generate the archive name for the driver packaging |
| # TODO: Re-enable OpenSSL version appending if multiple OpenSSL versions are enabled |
| #$Env:DRIVER_ARTIFACT_ARCHIVE = "$($driver_archive_prefix)-cpp-driver-$($Env:DRIVER_VERSION)-openssl-$($Env:OPENSSL_MAJOR_MINOR)-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| $Env:DRIVER_ARTIFACT_ARCHIVE = "$($driver_archive_prefix)-cpp-driver-$($Env:DRIVER_VERSION)-$($windows_architecture)-msvc$($Env:VISUAL_STUDIO_INTERNAL_VERSION).zip" |
| |
| # Generate additional download/install environments for third party build requirements |
| $Env:BISON_BINARIES_ARCHIVE = "bison-$($bison_version)-bin.zip" |
| $Env:BISON_BINARIES_DOWNLOAD_URL = "http://downloads.sourceforge.net/gnuwin32/$($Env:BISON_BINARIES_ARCHIVE)" |
| $Env:BISON_DEPENDENCIES_ARCHIVE = "bison-$($bison_version)-dep.zip" |
| $Env:BISON_DEPENDENCIES_DOWNLOAD_URL = "http://downloads.sourceforge.net/gnuwin32/$($Env:BISON_DEPENDENCIES_ARCHIVE)" |
| $Env:BISON_ROOT_DIR = "$($bin_location_prefix)/bison-$($bison_version)" |
| $Env:PERL_STANDALONE_ARCHIVE = "strawberry-perl-$($perl_version)-64bit-portable.zip" |
| $Env:PERL_STANDALONE_DOWNLOAD_URL = "http://strawberryperl.com/download/$($perl_version)/$($Env:PERL_STANDALONE_ARCHIVE)" |
| $Env:PERL_ROOT_DIR = "$($bin_location_prefix)/perl-$($perl_version)" |
| |
| # Update the PATH to include the third party build requirement tools (prepend) |
| $Env:PATH = "$($Env:BISON_ROOT_DIR)/bin;$($Env:PERL_ROOT_DIR)/perl/site/bin;$($Env:PERL_ROOT_DIR)/perl/bin;$($Env:PERL_ROOT_DIR)/c/bin;$($Env:KERBEROS_ROOT_DIR)/bin;$($Env:LIBUV_ROOT_DIR)/bin;$($Env:OPENSSL_ROOT_DIR)/bin;$($Env:PATH)" |
| } |
| |
| Function Install-Driver-Environment { |
| # Remove pre-installed OpenSSL (resolve conflicts) |
| Remove-Item -Force -Recurse -Path "C:/OpenSSL-*" |
| |
| # Determine if Bison needs to be installed (cached) |
| If (-Not (Test-Path -Path "$($Env:BISON_ROOT_DIR)")) { |
| # Download and extract the dependency |
| try { |
| Write-Host "Downloading and extracting Bison for Windows" |
| New-Item -ItemType Directory -Force -Path "$($Env:BISON_ROOT_DIR)" | Out-Null |
| $is_download_complete = $False |
| $retries = 0 |
| do { |
| try { |
| Invoke-WebRequest -Uri "$($Env:BISON_BINARIES_DOWNLOAD_URL)" -OutFile $Env:BISON_BINARIES_ARCHIVE -UserAgent [Microsoft.PowerShell.Commands.PSUserAgent]::Chrome |
| $is_download_complete = $True |
| } catch { |
| Write-Host "Error downloading Bison binaries; sleeping for 10 seconds ... " -NoNewLine -BackgroundColor DarkRed |
| Start-Sleep -s 10 |
| Write-Host "done." -BackgroundColor DarkRed |
| Write-Host "Retrying Bison binaries download" |
| } |
| $retries++ |
| } while($is_download_complete -eq $False -and $retries -lt 10) |
| $argument_list = @" |
| -o"$($Env:BISON_ROOT_DIR)" x "$($Env:BISON_BINARIES_ARCHIVE)" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Remove-Item -Force -Recurse -Path "$($Env:BISON_ROOT_DIR)" |
| Throw "Failed to extract Bison binaries" |
| } |
| $is_download_complete = $False |
| $retries = 0 |
| do { |
| try { |
| Invoke-WebRequest -Uri "$($Env:BISON_DEPENDENCIES_DOWNLOAD_URL)" -OutFile $Env:BISON_DEPENDENCIES_ARCHIVE -UserAgent [Microsoft.PowerShell.Commands.PSUserAgent]::Chrome |
| $is_download_complete = $True |
| } catch { |
| Write-Host "Error downloading Bison dependencies; sleeping for 10 seconds ... " -NoNewLine -BackgroundColor DarkRed |
| Start-Sleep -s 10 |
| Write-Host "done." -BackgroundColor DarkRed |
| Write-Host "Retrying Bison dependencies download" |
| } |
| $retries++ |
| } while($is_download_complete -eq $False -and $retries -lt 10) |
| $argument_list = @" |
| -aoa -o"$($Env:BISON_ROOT_DIR)" x "$($Env:BISON_DEPENDENCIES_ARCHIVE)" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Remove-Item -Force -Recurse -Path "$($Env:BISON_ROOT_DIR)" |
| Throw "Failed to extract Bison dependencies" |
| } |
| |
| # Delete the binary archive |
| Remove-Item $Env:BISON_BINARIES_ARCHIVE |
| Remove-Item $Env:BISON_DEPENDENCIES_ARCHIVE |
| } catch { |
| Remove-Item -Force -Recurse -Path "$($Env:BISON_ROOT_DIR)" |
| Throw $PSItem |
| } |
| } |
| |
| # Display the Bison version information |
| Bison-Version-Information |
| |
| # Determine if Strawberry Perl needs to be installed (cached) |
| If (-Not (Test-Path -Path "$($Env:PERL_ROOT_DIR)")) { |
| # Download and extract the dependency |
| try { |
| Write-Host "Downloading and extracting Strawberry Perl for Windows" |
| New-Item -ItemType Directory -Force -Path "$($Env:PERL_ROOT_DIR)" | Out-Null |
| If ($Env:APPVEYOR -Like "True") { |
| Start-FileDownload "$($Env:PERL_STANDALONE_DOWNLOAD_URL)" -FileName $Env:PERL_STANDALONE_ARCHIVE |
| } Else { |
| curl.exe -o "$($Env:PERL_STANDALONE_ARCHIVE)" "$($Env:PERL_STANDALONE_DOWNLOAD_URL)" |
| } |
| $argument_list = @" |
| -o"$($Env:PERL_ROOT_DIR)" x "$($Env:PERL_STANDALONE_ARCHIVE)" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Remove-Item -Force -Recurse -Path "$($Env:PERL_ROOT_DIR)" |
| Throw "Failed to extract Strawberry Perl" |
| } |
| |
| # Delete the binary archive |
| Remove-Item $Env:PERL_STANDALONE_ARCHIVE |
| } catch { |
| Remove-Item -Force -Recurse -Path "$($Env:PERL_ROOT_DIR)" |
| Throw $PSItem |
| } |
| } |
| |
| # Display the Perl and CMake version information |
| Perl-Version-Information |
| CMake-Version-Information |
| |
| # Determine the location of the CMake modules (external projects) |
| $cmake_modules_dir = "$($Env:APPVEYOR_BUILD_FOLDER -Replace `"\\`", `"/`")/" |
| If ($Env:DRIVER_TYPE -Like "dse") { |
| $cmake_modules_dir += "cpp-driver/" |
| } |
| $cmake_modules_dir += "cmake" |
| |
| # Build and install the dependencies (if needed; cached) |
| $dependencies_build_location_prefix = "C:/projects/dependencies/build/" |
| If (-Not (Test-Path -Path "$($Env:LIBUV_ROOT_DIR)/lib")) { # lib directory checked due to external project being CMake (automatically creates root directory) |
| New-Item -ItemType Directory -Force -Path "$($dependencies_build_location_prefix)/libuv" | Out-Null |
| Push-Location -Path "$($dependencies_build_location_prefix)/libuv" |
| |
| $cmakelists_contents = @" |
| cmake_minimum_required(VERSION 3.10 FATAL_ERROR) |
| project(libuv) |
| set(PROJECT_DISPLAY_NAME "AppVeyor CI Build for libuv") |
| set(PROJECT_MODULE_DIR $cmake_modules_dir) |
| set(CMAKE_MODULE_PATH `${CMAKE_MODULE_PATH} `${PROJECT_MODULE_DIR}) |
| include(ExternalProject-libuv) |
| set(GENERATED_SOURCE_FILE `${CMAKE_CURRENT_BINARY_DIR}/main.cpp) |
| file(REMOVE `${GENERATED_SOURCE_FILE}) |
| file(WRITE `${GENERATED_SOURCE_FILE} "int main () { return 0; }") |
| add_executable(`${PROJECT_NAME} `${GENERATED_SOURCE_FILE}) |
| add_dependencies(`${PROJECT_NAME} `${LIBUV_LIBRARY_NAME}) |
| "@ |
| $cmakelists_contents | Out-File -FilePath "CMakeLists.txt" -Encoding Utf8 -Force |
| |
| Write-Host "Configuring libuv" |
| cmake -G "$($Env:CMAKE_GENERATOR)" -A $Env:CMAKE_PLATFORM -DBUILD_SHARED_LIBS=On "-DLIBUV_VERSION=$($Env:LIBUV_VERSION)" "-DLIBUV_INSTALL_PREFIX=$($Env:LIBUV_ROOT_DIR)" . |
| If ($LastExitCode -ne 0) { |
| If (Test-Path -Path "build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeOutput.log" -DeploymentName "libuv Output Log" |
| } |
| If (Test-Path -Path "build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeError.log" -DeploymentName "libuv Error Log" |
| } |
| Pop-Location |
| Throw "Failed to configure libuv for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| Write-Host "Building and Installing libuv" |
| cmake --build . --config RelWithDebInfo |
| If ($LastExitCode -ne 0) { |
| If (Test-Path -Path "build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeOutput.log" -DeploymentName "libuv Output Log" |
| } |
| If (Test-Path -Path "build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeError.log" -DeploymentName "libuv Error Log" |
| } |
| Pop-Location |
| Throw "Failed to build libuv for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| |
| Pop-Location |
| } |
| |
| $library_types = ("shared", "static") |
| $library_types | foreach { |
| If (-Not (Test-Path -Path "$($Env:OPENSSL_BASE_DIR)/$_")) { |
| New-Item -ItemType Directory -Force -Path "$($dependencies_build_location_prefix)/openssl/$_" | Out-Null |
| Push-Location -Path "$($dependencies_build_location_prefix)/openssl/$_" |
| |
| $cmakelists_contents = @" |
| cmake_minimum_required(VERSION 3.10 FATAL_ERROR) |
| project(OpenSSL) |
| set(PROJECT_DISPLAY_NAME "AppVeyor CI Build for OpenSSL") |
| set(PROJECT_MODULE_DIR $cmake_modules_dir) |
| set(CMAKE_MODULE_PATH `${CMAKE_MODULE_PATH} `${PROJECT_MODULE_DIR}) |
| include(ExternalProject-OpenSSL) |
| set(GENERATED_SOURCE_FILE `${CMAKE_CURRENT_BINARY_DIR}/main.cpp) |
| file(REMOVE `${GENERATED_SOURCE_FILE}) |
| file(WRITE `${GENERATED_SOURCE_FILE} "int main () { return 0; }") |
| add_executable(`${PROJECT_NAME} `${GENERATED_SOURCE_FILE}) |
| add_dependencies(`${PROJECT_NAME} `${OPENSSL_LIBRARY_NAME}) |
| "@ |
| $cmakelists_contents | Out-File -FilePath "CMakeLists.txt" -Encoding Utf8 -Force |
| |
| Write-Host "Configuring OpenSSL [$_]" |
| $shared_libs = "Off" |
| if ("$_" -Like "shared") { |
| $shared_libs = "On" |
| } |
| cmake -G "$($Env:CMAKE_GENERATOR)" -A $Env:CMAKE_PLATFORM "-DBUILD_SHARED_LIBS=$($shared_libs)" "-DOPENSSL_VERSION=$($Env:OPENSSL_VERSION)" "-DOPENSSL_INSTALL_PREFIX=$($Env:OPENSSL_BASE_DIR)/$_" . |
| If ($LastExitCode -ne 0) { |
| If (Test-Path -Path "build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeOutput.log" -DeploymentName "OpenSSL Output Log" |
| } |
| If (Test-Path -Path "build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeError.log" -DeploymentName "OpenSSL Error Log" |
| } |
| Pop-Location |
| Throw "Failed to configure OpenSSL for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| Write-Host "Building and Installing OpenSSL [$_]" |
| cmake --build . --config RelWithDebInfo |
| If ($LastExitCode -ne 0) { |
| If (Test-Path -Path "build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeOutput.log" -DeploymentName "OpenSSL Output Log" |
| } |
| If (Test-Path -Path "build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeError.log" -DeploymentName "OpenSSL Error Log" |
| } |
| Pop-Location |
| Throw "Failed to build OpenSSL for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| |
| Pop-Location |
| } |
| } |
| |
| If (-Not (Test-Path -Path "$($Env:ZLIB_ROOT_DIR)/lib")) { |
| New-Item -ItemType Directory -Force -Path "$($dependencies_build_location_prefix)/zlib" | Out-Null |
| Push-Location -Path "$($dependencies_build_location_prefix)/zlib" |
| |
| $cmakelists_contents = @" |
| cmake_minimum_required(VERSION 3.10 FATAL_ERROR) |
| project(zlib) |
| set(PROJECT_DISPLAY_NAME "AppVeyor CI Build for zlib") |
| set(PROJECT_MODULE_DIR $cmake_modules_dir) |
| set(CMAKE_MODULE_PATH `${CMAKE_MODULE_PATH} `${PROJECT_MODULE_DIR}) |
| include(ExternalProject-zlib) |
| set(GENERATED_SOURCE_FILE `${CMAKE_CURRENT_BINARY_DIR}/main.cpp) |
| file(REMOVE `${GENERATED_SOURCE_FILE}) |
| file(WRITE `${GENERATED_SOURCE_FILE} "int main () { return 0; }") |
| add_executable(`${PROJECT_NAME} `${GENERATED_SOURCE_FILE}) |
| add_dependencies(`${PROJECT_NAME} `${ZLIB_LIBRARY_NAME}) |
| "@ |
| $cmakelists_contents | Out-File -FilePath "CMakeLists.txt" -Encoding Utf8 -Force |
| |
| Write-Host "Configuring zlib" |
| cmake -G "$($Env:CMAKE_GENERATOR)" -A $Env:CMAKE_PLATFORM -DBUILD_SHARED_LIBS=On "-DZLIB_VERSION=$($Env:ZLIB_VERSION)" "-DZLIB_INSTALL_PREFIX=$($Env:ZLIB_ROOT_DIR)" . |
| If ($LastExitCode -ne 0) { |
| If (Test-Path -Path "build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeOutput.log" -DeploymentName "zlib Output Log" |
| } |
| If (Test-Path -Path "build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeError.log" -DeploymentName "zlib Error Log" |
| } |
| Pop-Location |
| Throw "Failed to configure zlib for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| Write-Host "Building and Installing zlib" |
| cmake --build . --config RelWithDebInfo |
| If ($LastExitCode -ne 0) { |
| If (Test-Path -Path "build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeOutput.log" -DeploymentName "zlib Output Log" |
| } |
| If (Test-Path -Path "build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeError.log" -DeploymentName "zlib Error Log" |
| } |
| Pop-Location |
| Throw "Failed to build zlib for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| |
| Pop-Location |
| } |
| |
| # Determine if Kerberos for Windows should be installed (cached) |
| If (-Not (Test-Path -Path "$($Env:KERBEROS_ROOT_DIR)")) { |
| # Download and extract the dependency |
| try { |
| Write-Host "Downloading and extracting Kerberos for Windows" |
| New-Item -ItemType Directory -Force -Path "$($Env:KERBEROS_ROOT_DIR)" | Out-Null |
| If ($Env:APPVEYOR -Like "True") { |
| Start-FileDownload "$($Env:KERBEROS_DOWNLOAD_URL)" -FileName $Env:KERBEROS_ARCHIVE |
| } Else { |
| curl.exe -o "$($Env:KERBEROS_ARCHIVE)" "$($Env:KERBEROS_DOWNLOAD_URL)" |
| } |
| $argument_list = @" |
| -o"$($Env:KERBEROS_EXTRACT_DIR)" x "$($Env:KERBEROS_ARCHIVE)" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Remove-Item -Force -Recurse -Path "$($Env:KERBEROS_EXTRACT_DIR)" |
| Throw "Failed to extract Kerberos" |
| } |
| |
| # Delete the binary archive |
| Remove-Item $Env:KERBEROS_ARCHIVE |
| } catch { |
| Remove-Item -Force -Recurse -Path "$($Env:KERBEROS_EXTRACT_DIR)" |
| Throw $PSItem |
| } |
| } |
| |
| # Determine if libssh2 should be installed (cached) |
| If (-Not (Test-Path -Path "$($Env:LIBSSH2_ROOT_DIR)/lib")) { # lib directory checked due to external project being CMake (automatically creates root directory) |
| New-Item -ItemType Directory -Force -Path "$($dependencies_build_location_prefix)/libssh2" | Out-Null |
| Push-Location -Path "$($dependencies_build_location_prefix)/libssh2" |
| |
| $cmakelists_contents = @" |
| cmake_minimum_required(VERSION 3.10 FATAL_ERROR) |
| project(libssh2) |
| set(PROJECT_DISPLAY_NAME "AppVeyor CI Build for libssh2") |
| set(PROJECT_MODULE_DIR $cmake_modules_dir) |
| set(CMAKE_MODULE_PATH `${CMAKE_MODULE_PATH} `${PROJECT_MODULE_DIR}) |
| include(ExternalProject-libssh2) |
| set(GENERATED_SOURCE_FILE `${CMAKE_CURRENT_BINARY_DIR}/main.cpp) |
| file(REMOVE `${GENERATED_SOURCE_FILE}) |
| file(WRITE `${GENERATED_SOURCE_FILE} "int main () { return 0; }") |
| add_executable(`${PROJECT_NAME} `${GENERATED_SOURCE_FILE}) |
| add_dependencies(`${PROJECT_NAME} `${LIBSSH2_LIBRARY_NAME}) |
| "@ |
| $cmakelists_contents | Out-File -FilePath "CMakeLists.txt" -Encoding Utf8 -Force |
| |
| Write-Host "Configuring libssh2" |
| cmake -G "$($Env:CMAKE_GENERATOR)" -A $Env:CMAKE_PLATFORM "-DLIBSSH2_VERSION=$($Env:LIBSSH2_VERSION)" "-DLIBSSH2_INSTALL_PREFIX=$($Env:LIBSSH2_ROOT_DIR)" . |
| If ($LastExitCode -ne 0) { |
| If (Test-Path -Path "build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeOutput.log" -DeploymentName "libssh2 Output Log" |
| } |
| If (Test-Path -Path "build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeError.log" -DeploymentName "libssh2 Error Log" |
| } |
| Pop-Location |
| Throw "Failed to configure libssh2 for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| Write-Host "Building and Installing libssh2" |
| cmake --build . --config RelWithDebInfo |
| If ($LastExitCode -ne 0) { |
| If (Test-Path -Path "build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeOutput.log" -DeploymentName "libssh2 Output Log" |
| } |
| If (Test-Path -Path "build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "build/CMakeFiles/CMakeError.log" -DeploymentName "libssh2 Error Log" |
| } |
| Pop-Location |
| Throw "Failed to build libssh2 for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| |
| Pop-Location |
| } |
| |
| # Archive any dependency builds logs and perform cleanup |
| Get-ChildItem -File -Filter "*.log" -Recurse -Path "C:/projects/dependencies/build" | ForEach-Object { |
| If ($_.FullName.ToLower() -Match "-stamp" -And |
| $_.Length -gt 0kb) { |
| New-Item -ItemType Directory -Force -Path "$($Env:DRIVER_ARTIFACTS_LOGS_DIR)" | Out-Null |
| Copy-Item -Force -Path "$($_.FullName)" "$($Env:DRIVER_ARTIFACTS_LOGS_DIR)" |
| } |
| } |
| } |
| |
| Function Build-Driver { |
| # Ensure Boost atomic is used for Visual Studio 2010 (increased performance) |
| $use_boost_atomic = "Off" |
| If ($Env:VISUAL_STUDIO_INTERNAL_VERSION -Like "100") { |
| $use_boost_atomic = "On" # Enable Boost atomic usage |
| } |
| |
| # Build the driver |
| $driver_type = "Apache Cassandra and DataStax Products" |
| If ($Env:DRIVER_TYPE -Like "dse") { |
| $driver_type = "DSE" |
| } |
| New-Item -ItemType Directory -Force -Path "$($Env:APPVEYOR_BUILD_FOLDER)/build" |
| Push-Location "$($Env:APPVEYOR_BUILD_FOLDER)/build" |
| Write-Host "Configuring DataStax C/C++ $($driver_type) Driver" |
| cmake -G "$($Env:CMAKE_GENERATOR)" -A $Env:CMAKE_PLATFORM "-D$($Env:DRIVER_TYPE)_MULTICORE_COMPILATION=On" "-D$($Env:DRIVER_TYPE)_USE_KERBEROS=On" "-D$($Env:DRIVER_TYPE)_USE_OPENSSL=On" "-D$($Env:DRIVER_TYPE)_USE_ZLIB=On" "-D$($Env:DRIVER_TYPE)_USE_BOOST_ATOMIC=$($use_boost_atomic)" "-D$($Env:DRIVER_TYPE)_BUILD_EXAMPLES=On" "-D$($Env:DRIVER_TYPE)_BUILD_TESTS=On" "-D$($Env:DRIVER_TYPE)_USE_LIBSSH2=On" "-DCMAKE_INSTALL_PREFIX=`"$($Env:DRIVER_INSTALL_DIR)`"" .. |
| If ($LastExitCode -ne 0) { |
| Pop-Location |
| Throw "Failed to configure DataStax C/C++ $($driver_type) Driver for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| Write-Host "Building and Installing DataStax C/C++ $($driver_type) Driver" |
| cmake --build . --config RelWithDebInfo --target install |
| If ($LastExitCode -ne 0) { |
| Pop-Location |
| Throw "Failed to build DataStax C/C++ $($driver_type) Driver for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| Pop-Location |
| |
| # Copy the binary artifacts |
| New-Item -ItemType Directory -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/bin/examples" | Out-Null |
| New-Item -ItemType Directory -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/bin/tests" | Out-Null |
| Get-ChildItem -File -Filter "*.exe" -Recurse -Path "$($Env:APPVEYOR_BUILD_FOLDER)/build" | ForEach-Object { |
| If ($_.FullName.ToLower() -Match "relwithdebinfo") { |
| $suffix="bin" |
| If ($_.FullName.ToLower() -Match "examples") { |
| $suffix+="/examples" |
| } ElseIf ($_.FullName.ToLower() -Match "test.*exe") { |
| $suffix+="/tests" |
| } |
| Copy-Item -Force -Path "$($_.FullName)" "$($Env:DRIVER_ARTIFACTS_DIR)/$($suffix)" |
| } |
| } |
| } |
| |
| Function Execute-Driver-Unit-Tests { |
| # Update the PATH for the test executables to run with output |
| $Env:PATH = "$($Env:DRIVER_ARTIFACTS_DIR)/bin/tests;$($Env:PATH)" |
| |
| # Execute the unit tests |
| $is_failure = $False |
| cassandra-unit-tests.exe --gtest_output=xml:"$($Env:DRIVER_ARTIFACTS_DIR)\bin\tests\unit-tests-gtest-results.xml" |
| If ($LastExitCode -ne 0) { |
| Throw "Error Executing Unit tests: Check tests tab or download from the artifacts" |
| } |
| } |
| |
| Function Push-Driver-Unit-Tests-Results { |
| # Push the unit test(s) results |
| If ($Env:APPVEYOR -Like "True") { |
| $web_client = New-Object "System.Net.WebClient" |
| Get-ChildItem -File -Filter "*.xml" -Path "$($Env:DRIVER_ARTIFACTS_DIR)/bin/tests" -Recurse | ForEach-Object { |
| $web_client.UploadFile("https://ci.appveyor.com/api/testresults/junit/$($Env:APPVEYOR_JOB_ID)", (Resolve-Path "$($_.FullName)")) |
| } |
| } |
| } |
| |
| Function Package-Artifacts { |
| # Package the driver artifacts |
| New-Item -ItemType Directory -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)" | Out-Null |
| $argument_list = @" |
| a -tzip "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:DRIVER_ARTIFACT_ARCHIVE)" -r "$($Env:DRIVER_INSTALL_DIR)/*" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Throw "Failed to archive driver for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| |
| # Package the driver example and test artifacts |
| $argument_list = @" |
| a -tzip "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:DRIVER_ARTIFACT_EXAMPLES_ARCHIVE)" -r "$($Env:DRIVER_ARTIFACTS_DIR)/bin/examples/*" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Throw "Failed to archive driver examples for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| $argument_list = @" |
| a -tzip "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:DRIVER_ARTIFACT_TESTS_ARCHIVE)" -r "$($Env:DRIVER_ARTIFACTS_DIR)/bin/tests/*.exe" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Throw "Failed to archive driver tests for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| |
| # Clean up the library dependency directories for libuv packaging |
| New-Item -ItemType Directory -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/libuv" | Out-Null |
| Copy-Item -Force -Recurse -Path "$($Env:LIBUV_ROOT_DIR)/*" "$($Env:DRIVER_ARTIFACTS_DIR)/libuv" | Out-Null |
| $argument_list = @" |
| a -tzip "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:LIBUV_ARTIFACT_ARCHIVE)" -r "$($Env:DRIVER_ARTIFACTS_DIR)/libuv/*" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Throw "Failed to archive libuv for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| |
| # Clean up the library dependency directories for OpenSSL packaging |
| New-Item -ItemType Directory -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl" | Out-Null |
| Copy-Item -Force -Recurse -Path "$($Env:OPENSSL_BASE_DIR)/*" "$($Env:DRIVER_ARTIFACTS_DIR)/openssl" | Out-Null |
| Move-Item -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/static/LICENSE" "$($Env:DRIVER_ARTIFACTS_DIR)/openssl" | Out-Null |
| Move-Item -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/static/include" "$($Env:DRIVER_ARTIFACTS_DIR)/openssl" | Out-Null |
| Move-Item -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/static/openssl.cnf" "$($Env:DRIVER_ARTIFACTS_DIR)/openssl" | Out-Null |
| If (Test-Path -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/static/openssl.cnf.dist") { |
| Move-Item -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/static/openssl.cnf.dist" "$($Env:DRIVER_ARTIFACTS_DIR)/openssl" | Out-Null |
| } |
| Remove-Item -Force -Recurse -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/shared/include" | Out-Null |
| Remove-Item -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/shared/LICENSE" | Out-Null |
| Remove-Item -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/shared/openssl.cnf" | Out-Null |
| If (Test-Path -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/shared/openssl.cnf.dist") { |
| Remove-Item -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/shared/openssl.cnf.dist" | Out-Null |
| } |
| $argument_list = @" |
| a -tzip "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:OPENSSL_ARTIFACT_ARCHIVE)" -r "$($Env:DRIVER_ARTIFACTS_DIR)/openssl/*" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Throw "Failed to archive OpenSSL for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| |
| # Clean up the library dependency directories for zlib packaging |
| New-Item -ItemType Directory -Force -Path "$($Env:DRIVER_ARTIFACTS_DIR)/zlib" | Out-Null |
| Copy-Item -Force -Recurse -Path "$($Env:ZLIB_ROOT_DIR)/*" "$($Env:DRIVER_ARTIFACTS_DIR)/zlib" | Out-Null |
| $argument_list = @" |
| a -tzip "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:ZLIB_ARTIFACT_ARCHIVE)" -r "$($Env:DRIVER_ARTIFACTS_DIR)/zlib/*" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -ne 0) { |
| Throw "Failed to archive zlib for MSVC $($Env:VISUAL_STUDIO_INTERNAL_VERSION)-$($Env:Platform)" |
| } |
| } |
| |
| Function Push-Artifacts { |
| If ($Env:APPVEYOR -Like "True") { |
| $driver_type = "Apache Cassandra and DataStax Products" |
| If ($Env:DRIVER_TYPE -Like "dse") { |
| $driver_type = "DSE" |
| } |
| |
| Push-AppveyorArtifact "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:DRIVER_ARTIFACT_ARCHIVE)" -DeploymentName "DataStax C/C++ $($driver_type) Driver" |
| Push-AppveyorArtifact "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:DRIVER_ARTIFACT_EXAMPLES_ARCHIVE)" -DeploymentName "DataStax C/C++ $($driver_type) Driver Examples" |
| Push-AppveyorArtifact "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:DRIVER_ARTIFACT_TESTS_ARCHIVE)" -DeploymentName "DataStax C/C++ $($driver_type) Driver Tests" |
| Push-AppveyorArtifact "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:LIBUV_ARTIFACT_ARCHIVE)" -DeploymentName "libuv v$($Env:LIBUV_VERSION)" |
| Push-AppveyorArtifact "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:OPENSSL_ARTIFACT_ARCHIVE)" -DeploymentName "OpenSSL v$($Env:OPENSSL_VERSION)" |
| Push-AppveyorArtifact "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:ZLIB_ARTIFACT_ARCHIVE)" -DeploymentName "zlib v$($Env:ZLIB_VERSION)" |
| } |
| } |
| |
| Function Publish-Artifact-To-Artifactory { |
| Param ( |
| [Parameter(Mandatory=$True)] [String] $Uri, |
| [Parameter(Mandatory=$True)] [String] $FilePath, |
| [Parameter(Mandatory=$False)] [Int] $TimeoutSec = 480 |
| ) |
| |
| # Create the credentials and checksum headers |
| $username = "$($Env:ARTIFACTORY_USERNAME)" |
| $password = ConvertTo-SecureString -String "$($Env:ARTIFACTORY_PASSWORD)" -AsPlainText -Force |
| $credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $username, $password |
| $md5_hash = $(Get-FileHash "$($FilePath)" -Algorithm MD5).Hash |
| $sha1_hash = $(Get-FileHash "$($FilePath)" -Algorithm SHA1).Hash |
| $sha256_hash = $(Get-FileHash "$($FilePath)" -Algorithm SHA256).Hash |
| $headers = @{ |
| # "X-Checksum-Deploy" = $True |
| "X-Checksum-Md5" = $md5_hash |
| "X-Checksum-Sha1" = $sha1_hash |
| "X-Checksum-Sha256" = $sha256_hash |
| } |
| |
| # Publish the artifacts to artifactory |
| Try { |
| [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12 # Ensure TLS v1.2 is enabled |
| $result = Invoke-RestMethod -Headers $headers -Uri "$($Uri)" -Method Put -InFile "$($FilePath)" -Credential $credential -ContentType "multipart/form-data" -TimeoutSec $TimeoutSec |
| } Catch { |
| $error_code = $_.Exception.Response.StatusCode.value__ |
| $message = $_.Exception.Message |
| $filename = Split-Path $FilePath -leaf |
| If ($Env:APPVEYOR -Like "True") { |
| Add-AppveyorMessage -Category Error -Message "Unable to Upload $($filename) [$($error_code)]" -Details "$($message)" |
| } Else { |
| Write-Error -Message "Unable to Upload $($filename) [$($error_code)]: $($message)" |
| } |
| return $error_code |
| } |
| return 0 |
| } |
| |
| Function Publish-Artifacts { |
| # Determine if the artifacts should to published to Artifactory |
| If ($Env:APPVEYOR_REPO_TAG -Like "True") { |
| # Create the upload environment |
| $driver_type = "cassandra" |
| If ($Env:DRIVER_TYPE -Like "dse") { |
| $driver_type = "dse" |
| } |
| |
| # Create the Uri and FilePath components for the upload |
| $base_uri = "$($Env:ARTIFACTORY_BASE_URI)/$($Env:DRIVER_VERSION)/$(Get-Commit-Sha)/windows" |
| $driver_uri = "$($base_uri)/$($driver_type)/v$($Env:DRIVER_VERSION)/$($Env:DRIVER_ARTIFACT_ARCHIVE)" |
| $driver_archive = "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:DRIVER_ARTIFACT_ARCHIVE)" |
| $libuv_uri = "$($base_uri)/dependencies/libuv/v$($Env:LIBUV_VERSION)/$($Env:LIBUV_ARTIFACT_ARCHIVE)" |
| $libuv_archive = "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:LIBUV_ARTIFACT_ARCHIVE)" |
| #TODO: Need to handle OpenSSL v1.1.x if enabled |
| $openssl_uri = "$($base_uri)/dependencies/openssl/v$($Env:OPENSSL_VERSION)/$($Env:OPENSSL_ARTIFACT_ARCHIVE)" |
| $openssl_archive = "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:OPENSSL_ARTIFACT_ARCHIVE)" |
| $zlib_uri = "$($base_uri)/dependencies/zlib/v$($Env:ZLIB_VERSION)/$($Env:ZLIB_ARTIFACT_ARCHIVE)" |
| $zlib_archive = "$($Env:DRIVER_ARTIFACTS_DIR)/$($Env:ZLIB_ARTIFACT_ARCHIVE)" |
| |
| # Publish/Upload the driver and it dependencies to Artifactory |
| $is_failure = $False |
| $failed_upload = @() |
| If ((Publish-Artifact-To-Artifactory -Uri "$($driver_uri)" -FilePath "$($driver_archive)") -ne 0) { |
| $is_failure = $True |
| $failed_upload += "Driver" |
| } |
| If ((Publish-Artifact-To-Artifactory -Uri "$($libuv_uri)" -FilePath "$($libuv_archive)") -ne 0) { |
| $is_failure = $True |
| $failed_upload += "libuv" |
| } |
| #TODO: Need to handle OpenSSL v1.1.x if enabled |
| If ((Publish-Artifact-To-Artifactory -Uri "$($openssl_uri)" -FilePath "$($openssl_archive)") -ne 0) { |
| $is_failure = $True |
| $failed_upload += "OpenSSL" |
| } |
| If ((Publish-Artifact-To-Artifactory -Uri "$($zlib_uri)" -FilePath "$($zlib_archive)") -ne 0) { |
| $is_failure = $True |
| $failed_upload += "zlib" |
| } |
| |
| # Check to see if there was a failure uploading the artifacts |
| If ($is_failure) { |
| Throw "Error Uploading Artifacts to Artifactory: $($failed_upload -Join ", ")" |
| } |
| } |
| } |
| |
| Function Push-Build-Logs { |
| If ($Env:APPVEYOR -Like "True") { |
| # Determine the prefix directory based on driver type |
| $prefix_dir = "./" |
| If ($Env:DRIVER_TYPE -Like "dse") { |
| $prefix_dir += "cpp-driver" |
| } |
| |
| # Push the logs for the builds that occurred |
| If (Test-Path -Path "$($Env:DRIVER_ARTIFACTS_LOGS_DIR)") { |
| $argument_list = @" |
| a -tzip "cmake_external_project_logs.zip" -r "$($Env:DRIVER_ARTIFACTS_LOGS_DIR)/*.log" |
| "@ |
| $process = Start-Process -FilePath 7z -ArgumentList $argument_list -PassThru -Wait -NoNewWindow |
| If ($process.ExitCode -eq 0) { |
| Push-AppveyorArtifact "cmake_external_project_logs.zip" -DeploymentName "CMake External Project Logs" |
| } |
| } |
| If (Test-Path -Path "$($Env:APPVEYOR_BUILD_FOLDER)/build/CMakeFiles/CMakeOutput.log") { |
| Push-AppveyorArtifact "$($Env:APPVEYOR_BUILD_FOLDER)/build/CMakeFiles/CMakeOutput.log" -DeploymentName "Driver Output Log" |
| } |
| If (Test-Path -Path "$($Env:APPVEYOR_BUILD_FOLDER)/build/CMakeFiles/CMakeError.log") { |
| Push-AppveyorArtifact "$($Env:APPVEYOR_BUILD_FOLDER)/build/CMakeFiles/CMakeError.log" -DeploymentName "Driver Error Log" |
| } |
| } |
| } |
