| [[xquery-language]] |
| = XQuery Language |
| :page-source: components/camel-saxon/src/main/docs/xquery-language.adoc |
| |
| *Since Camel 1.0* |
| |
| Camel supports http://www.w3.org/TR/xquery/[XQuery] to allow an |
| Expression or Predicate to be |
| used in the DSL or xref:manual::xml-configuration.adoc[Xml |
| Configuration]. For example you could use XQuery to create an |
| Predicate in a xref:manual::filter-eip.adoc[Message |
| Filter] or as an Expression for a |
| Recipient List. |
| |
| == XQuery Language options |
| |
| // language options: START |
| The XQuery language supports 3 options, which are listed below. |
| |
| |
| |
| [width="100%",cols="2,1m,1m,6",options="header"] |
| |=== |
| | Name | Default | Java Type | Description |
| | type | | String | Sets the class name of the result type (type from output) The default result type is NodeSet |
| | headerName | | String | Name of header to use as input, instead of the message body |
| | trim | true | Boolean | Whether to trim the value to remove leading and trailing whitespaces and line breaks |
| |=== |
| // language options: END |
| // spring-boot-auto-configure options: START |
| == Spring Boot Auto-Configuration |
| |
| When using Spring Boot make sure to use the following Maven dependency to have support for auto configuration: |
| |
| [source,xml] |
| ---- |
| <dependency> |
| <groupId>org.apache.camel.springboot</groupId> |
| <artifactId>camel-saxon-starter</artifactId> |
| <version>x.x.x</version> |
| <!-- use the same version as your Camel core version --> |
| </dependency> |
| ---- |
| |
| |
| The component supports 10 options, which are listed below. |
| |
| |
| |
| [width="100%",cols="2,5,^1,2",options="header"] |
| |=== |
| | Name | Description | Default | Type |
| | *camel.component.xquery.basic-property-binding* | Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | Boolean |
| | *camel.component.xquery.bridge-error-handler* | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | Boolean |
| | *camel.component.xquery.configuration* | To use a custom Saxon configuration. The option is a net.sf.saxon.Configuration type. | | String |
| | *camel.component.xquery.configuration-properties* | To set custom Saxon configuration properties | | Map |
| | *camel.component.xquery.enabled* | Enable xquery component | true | Boolean |
| | *camel.component.xquery.lazy-start-producer* | Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing. | false | Boolean |
| | *camel.component.xquery.module-u-r-i-resolver* | To use the custom ModuleURIResolver. The option is a net.sf.saxon.lib.ModuleURIResolver type. | | String |
| | *camel.language.xquery.enabled* | Enable xquery language | true | Boolean |
| | *camel.language.xquery.trim* | Whether to trim the value to remove leading and trailing whitespaces and line breaks | true | Boolean |
| | *camel.language.xquery.type* | Sets the class name of the result type (type from output) The default result type is NodeSet | | String |
| |=== |
| // spring-boot-auto-configure options: END |
| |
| == Examples |
| |
| [source,java] |
| --------------------------- |
| from("queue:foo") |
| .filter().xquery("//foo") |
| .to("queue:bar") |
| --------------------------- |
| |
| You can also use functions inside your query, in which case you need an |
| explicit type conversion (or you will get a org.w3c.dom.DOMException: |
| HIERARCHY_REQUEST_ERR) by passing the Class as a second argument to the |
| *xquery()* method. |
| |
| [source,java] |
| ----------------------------------------------------------------------------- |
| from("direct:start") |
| .recipientList().xquery("concat('mock:foo.', /person/@city)", String.class); |
| ----------------------------------------------------------------------------- |
| |
| == Variables |
| |
| The IN message body will be set as the `contextItem`. Besides this these |
| Variables is also added as parameters: |
| |
| [width="100%",cols="10%,10%,80%",options="header",] |
| |======================================================================= |
| |Variable |Type |Description |
| |
| |exchange |Exchange |The current Exchange |
| |
| |in.body |Object |The In message's body |
| |
| |out.body |Object |The OUT message's body (if any) |
| |
| |in.headers.* |Object |You can access the value of exchange.in.headers with key *foo* by using |
| the variable which name is in.headers.foo |
| |
| |out.headers.* |Object |You can access the value of exchange.out.headers with key *foo* by using |
| the variable which name is out.headers.foo variable |
| |
| |*key name* |Object |Any exchange.properties and exchange.in.headers and any additional |
| parameters set using `setParameters(Map)`. These parameters is added |
| with they own key name, for instance if there is an IN header with the |
| key name *foo* then its added as *foo*. |
| |======================================================================= |
| |
| == Using XML configuration |
| |
| If you prefer to configure your routes in your Spring |
| XML file then you can use XPath expressions as follows |
| |
| [source,xml] |
| --------------------------------------------------------------------------------------------------------------- |
| <beans xmlns="http://www.springframework.org/schema/beans" |
| xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" |
| xmlns:foo="http://example.com/person" |
| xsi:schemaLocation=" |
| http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd |
| http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd"> |
| |
| <camelContext id="camel" xmlns="http://activemq.apache.org/camel/schema/spring"> |
| <route> |
| <from uri="activemq:MyQueue"/> |
| <filter> |
| <xquery>/foo:person[@name='James']</xquery> |
| <to uri="mqseries:SomeOtherQueue"/> |
| </filter> |
| </route> |
| </camelContext> |
| </beans> |
| --------------------------------------------------------------------------------------------------------------- |
| |
| Notice how we can reuse the namespace prefixes, *foo* in this case, in |
| the XPath expression for easier namespace based XQuery expressions! |
| |
| When you use functions in your XQuery expression you need an explicit |
| type conversion which is done in the xml configuration via the *@type* |
| attribute: |
| |
| [source,xml] |
| ------------------------------------------------------------------------------- |
| <xquery type="java.lang.String">concat('mock:foo.', /person/@city)</xquery> |
| ------------------------------------------------------------------------------- |
| |
| == Learning XQuery |
| |
| XQuery is a very powerful language for querying, searching, sorting and |
| returning XML. For help learning XQuery try these tutorials |
| |
| * Mike Kay's http://www.stylusstudio.com/xquery_primer.html[XQuery |
| Primer] |
| * the W3Schools http://www.w3schools.com/xquery/default.asp[XQuery |
| Tutorial] |
| |
| You might also find the http://www.w3.org/TR/xpath-functions/[XQuery |
| function reference] useful |
| |
| == Loading script from external resource |
| |
| You can externalize the script and have Camel load it from a resource |
| such as `"classpath:"`, `"file:"`, or `"http:"`. + |
| This is done using the following syntax: `"resource:scheme:location"`, |
| eg to refer to a file on the classpath you can do: |
| |
| [source,java] |
| ------------------------------------------------------------------------------ |
| .setHeader("myHeader").xquery("resource:classpath:myxquery.txt", String.class) |
| ------------------------------------------------------------------------------ |
| |
| == Dependencies |
| |
| To use XQuery in your camel routes you need to add the a dependency on |
| *camel-saxon* which implements the XQuery language. |
| |
| If you use maven you could just add the following to your pom.xml, |
| substituting the version number for the latest & greatest release (see |
| the download page for the latest versions). |
| |
| [source,java] |
| -------------------------------------- |
| <dependency> |
| <groupId>org.apache.camel</groupId> |
| <artifactId>camel-saxon</artifactId> |
| <version>x.x.x</version> |
| </dependency> |
| -------------------------------------- |