| /* |
| * Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| package org.apache.camel.builder.endpoint.dsl; |
| |
| import javax.annotation.Generated; |
| import org.apache.camel.ExchangePattern; |
| import org.apache.camel.builder.EndpointConsumerBuilder; |
| import org.apache.camel.builder.EndpointProducerBuilder; |
| import org.apache.camel.builder.endpoint.AbstractEndpointBuilder; |
| import org.apache.camel.spi.ExceptionHandler; |
| |
| /** |
| * The direct component provides direct, synchronous call to another endpoint |
| * from the same CamelContext. |
| * |
| * Generated by camel-package-maven-plugin - do not edit this file! |
| */ |
| @Generated("org.apache.camel.maven.packaging.EndpointDslMojo") |
| public interface DirectEndpointBuilderFactory { |
| |
| |
| /** |
| * Builder for endpoint consumers for the Direct component. |
| */ |
| public interface DirectEndpointConsumerBuilder |
| extends |
| EndpointConsumerBuilder { |
| default AdvancedDirectEndpointConsumerBuilder advanced() { |
| return (AdvancedDirectEndpointConsumerBuilder) this; |
| } |
| /** |
| * Allows for bridging the consumer to the Camel routing Error Handler, |
| * which mean any exceptions occurred while the consumer is trying to |
| * pickup incoming messages, or the likes, will now be processed as a |
| * message and handled by the routing Error Handler. By default the |
| * consumer will use the org.apache.camel.spi.ExceptionHandler to deal |
| * with exceptions, that will be logged at WARN or ERROR level and |
| * ignored. |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: consumer |
| */ |
| default DirectEndpointConsumerBuilder bridgeErrorHandler( |
| boolean bridgeErrorHandler) { |
| doSetProperty("bridgeErrorHandler", bridgeErrorHandler); |
| return this; |
| } |
| /** |
| * Allows for bridging the consumer to the Camel routing Error Handler, |
| * which mean any exceptions occurred while the consumer is trying to |
| * pickup incoming messages, or the likes, will now be processed as a |
| * message and handled by the routing Error Handler. By default the |
| * consumer will use the org.apache.camel.spi.ExceptionHandler to deal |
| * with exceptions, that will be logged at WARN or ERROR level and |
| * ignored. |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: consumer |
| */ |
| default DirectEndpointConsumerBuilder bridgeErrorHandler( |
| String bridgeErrorHandler) { |
| doSetProperty("bridgeErrorHandler", bridgeErrorHandler); |
| return this; |
| } |
| } |
| |
| /** |
| * Advanced builder for endpoint consumers for the Direct component. |
| */ |
| public interface AdvancedDirectEndpointConsumerBuilder |
| extends |
| EndpointConsumerBuilder { |
| default DirectEndpointConsumerBuilder basic() { |
| return (DirectEndpointConsumerBuilder) this; |
| } |
| /** |
| * To let the consumer use a custom ExceptionHandler. Notice if the |
| * option bridgeErrorHandler is enabled then this option is not in use. |
| * By default the consumer will deal with exceptions, that will be |
| * logged at WARN or ERROR level and ignored. |
| * |
| * The option is a: <code>org.apache.camel.spi.ExceptionHandler</code> |
| * type. |
| * |
| * Group: consumer (advanced) |
| */ |
| default AdvancedDirectEndpointConsumerBuilder exceptionHandler( |
| ExceptionHandler exceptionHandler) { |
| doSetProperty("exceptionHandler", exceptionHandler); |
| return this; |
| } |
| /** |
| * To let the consumer use a custom ExceptionHandler. Notice if the |
| * option bridgeErrorHandler is enabled then this option is not in use. |
| * By default the consumer will deal with exceptions, that will be |
| * logged at WARN or ERROR level and ignored. |
| * |
| * The option will be converted to a |
| * <code>org.apache.camel.spi.ExceptionHandler</code> type. |
| * |
| * Group: consumer (advanced) |
| */ |
| default AdvancedDirectEndpointConsumerBuilder exceptionHandler( |
| String exceptionHandler) { |
| doSetProperty("exceptionHandler", exceptionHandler); |
| return this; |
| } |
| /** |
| * Sets the exchange pattern when the consumer creates an exchange. |
| * |
| * The option is a: <code>org.apache.camel.ExchangePattern</code> type. |
| * |
| * Group: consumer (advanced) |
| */ |
| default AdvancedDirectEndpointConsumerBuilder exchangePattern( |
| ExchangePattern exchangePattern) { |
| doSetProperty("exchangePattern", exchangePattern); |
| return this; |
| } |
| /** |
| * Sets the exchange pattern when the consumer creates an exchange. |
| * |
| * The option will be converted to a |
| * <code>org.apache.camel.ExchangePattern</code> type. |
| * |
| * Group: consumer (advanced) |
| */ |
| default AdvancedDirectEndpointConsumerBuilder exchangePattern( |
| String exchangePattern) { |
| doSetProperty("exchangePattern", exchangePattern); |
| return this; |
| } |
| /** |
| * Whether the endpoint should use basic property binding (Camel 2.x) or |
| * the newer property binding with additional capabilities. |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointConsumerBuilder basicPropertyBinding( |
| boolean basicPropertyBinding) { |
| doSetProperty("basicPropertyBinding", basicPropertyBinding); |
| return this; |
| } |
| /** |
| * Whether the endpoint should use basic property binding (Camel 2.x) or |
| * the newer property binding with additional capabilities. |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointConsumerBuilder basicPropertyBinding( |
| String basicPropertyBinding) { |
| doSetProperty("basicPropertyBinding", basicPropertyBinding); |
| return this; |
| } |
| /** |
| * Sets whether synchronous processing should be strictly used, or Camel |
| * is allowed to use asynchronous processing (if supported). |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointConsumerBuilder synchronous( |
| boolean synchronous) { |
| doSetProperty("synchronous", synchronous); |
| return this; |
| } |
| /** |
| * Sets whether synchronous processing should be strictly used, or Camel |
| * is allowed to use asynchronous processing (if supported). |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointConsumerBuilder synchronous( |
| String synchronous) { |
| doSetProperty("synchronous", synchronous); |
| return this; |
| } |
| } |
| |
| /** |
| * Builder for endpoint producers for the Direct component. |
| */ |
| public interface DirectEndpointProducerBuilder |
| extends |
| EndpointProducerBuilder { |
| default AdvancedDirectEndpointProducerBuilder advanced() { |
| return (AdvancedDirectEndpointProducerBuilder) this; |
| } |
| /** |
| * If sending a message to a direct endpoint which has no active |
| * consumer, then we can tell the producer to block and wait for the |
| * consumer to become active. |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: producer |
| */ |
| default DirectEndpointProducerBuilder block(boolean block) { |
| doSetProperty("block", block); |
| return this; |
| } |
| /** |
| * If sending a message to a direct endpoint which has no active |
| * consumer, then we can tell the producer to block and wait for the |
| * consumer to become active. |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: producer |
| */ |
| default DirectEndpointProducerBuilder block(String block) { |
| doSetProperty("block", block); |
| return this; |
| } |
| /** |
| * Whether the producer should fail by throwing an exception, when |
| * sending to a DIRECT endpoint with no active consumers. |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: producer |
| */ |
| default DirectEndpointProducerBuilder failIfNoConsumers( |
| boolean failIfNoConsumers) { |
| doSetProperty("failIfNoConsumers", failIfNoConsumers); |
| return this; |
| } |
| /** |
| * Whether the producer should fail by throwing an exception, when |
| * sending to a DIRECT endpoint with no active consumers. |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: producer |
| */ |
| default DirectEndpointProducerBuilder failIfNoConsumers( |
| String failIfNoConsumers) { |
| doSetProperty("failIfNoConsumers", failIfNoConsumers); |
| return this; |
| } |
| /** |
| * Whether the producer should be started lazy (on the first message). |
| * By starting lazy you can use this to allow CamelContext and routes to |
| * startup in situations where a producer may otherwise fail during |
| * starting and cause the route to fail being started. By deferring this |
| * startup to be lazy then the startup failure can be handled during |
| * routing messages via Camel's routing error handlers. Beware that when |
| * the first message is processed then creating and starting the |
| * producer may take a little time and prolong the total processing time |
| * of the processing. |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: producer |
| */ |
| default DirectEndpointProducerBuilder lazyStartProducer( |
| boolean lazyStartProducer) { |
| doSetProperty("lazyStartProducer", lazyStartProducer); |
| return this; |
| } |
| /** |
| * Whether the producer should be started lazy (on the first message). |
| * By starting lazy you can use this to allow CamelContext and routes to |
| * startup in situations where a producer may otherwise fail during |
| * starting and cause the route to fail being started. By deferring this |
| * startup to be lazy then the startup failure can be handled during |
| * routing messages via Camel's routing error handlers. Beware that when |
| * the first message is processed then creating and starting the |
| * producer may take a little time and prolong the total processing time |
| * of the processing. |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: producer |
| */ |
| default DirectEndpointProducerBuilder lazyStartProducer( |
| String lazyStartProducer) { |
| doSetProperty("lazyStartProducer", lazyStartProducer); |
| return this; |
| } |
| /** |
| * The timeout value to use if block is enabled. |
| * |
| * The option is a: <code>long</code> type. |
| * |
| * Group: producer |
| */ |
| default DirectEndpointProducerBuilder timeout(long timeout) { |
| doSetProperty("timeout", timeout); |
| return this; |
| } |
| /** |
| * The timeout value to use if block is enabled. |
| * |
| * The option will be converted to a <code>long</code> type. |
| * |
| * Group: producer |
| */ |
| default DirectEndpointProducerBuilder timeout(String timeout) { |
| doSetProperty("timeout", timeout); |
| return this; |
| } |
| } |
| |
| /** |
| * Advanced builder for endpoint producers for the Direct component. |
| */ |
| public interface AdvancedDirectEndpointProducerBuilder |
| extends |
| EndpointProducerBuilder { |
| default DirectEndpointProducerBuilder basic() { |
| return (DirectEndpointProducerBuilder) this; |
| } |
| /** |
| * Whether the endpoint should use basic property binding (Camel 2.x) or |
| * the newer property binding with additional capabilities. |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointProducerBuilder basicPropertyBinding( |
| boolean basicPropertyBinding) { |
| doSetProperty("basicPropertyBinding", basicPropertyBinding); |
| return this; |
| } |
| /** |
| * Whether the endpoint should use basic property binding (Camel 2.x) or |
| * the newer property binding with additional capabilities. |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointProducerBuilder basicPropertyBinding( |
| String basicPropertyBinding) { |
| doSetProperty("basicPropertyBinding", basicPropertyBinding); |
| return this; |
| } |
| /** |
| * Sets whether synchronous processing should be strictly used, or Camel |
| * is allowed to use asynchronous processing (if supported). |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointProducerBuilder synchronous( |
| boolean synchronous) { |
| doSetProperty("synchronous", synchronous); |
| return this; |
| } |
| /** |
| * Sets whether synchronous processing should be strictly used, or Camel |
| * is allowed to use asynchronous processing (if supported). |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointProducerBuilder synchronous( |
| String synchronous) { |
| doSetProperty("synchronous", synchronous); |
| return this; |
| } |
| } |
| |
| /** |
| * Builder for endpoint for the Direct component. |
| */ |
| public interface DirectEndpointBuilder |
| extends |
| DirectEndpointConsumerBuilder, DirectEndpointProducerBuilder { |
| default AdvancedDirectEndpointBuilder advanced() { |
| return (AdvancedDirectEndpointBuilder) this; |
| } |
| } |
| |
| /** |
| * Advanced builder for endpoint for the Direct component. |
| */ |
| public interface AdvancedDirectEndpointBuilder |
| extends |
| AdvancedDirectEndpointConsumerBuilder, AdvancedDirectEndpointProducerBuilder { |
| default DirectEndpointBuilder basic() { |
| return (DirectEndpointBuilder) this; |
| } |
| /** |
| * Whether the endpoint should use basic property binding (Camel 2.x) or |
| * the newer property binding with additional capabilities. |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointBuilder basicPropertyBinding( |
| boolean basicPropertyBinding) { |
| doSetProperty("basicPropertyBinding", basicPropertyBinding); |
| return this; |
| } |
| /** |
| * Whether the endpoint should use basic property binding (Camel 2.x) or |
| * the newer property binding with additional capabilities. |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointBuilder basicPropertyBinding( |
| String basicPropertyBinding) { |
| doSetProperty("basicPropertyBinding", basicPropertyBinding); |
| return this; |
| } |
| /** |
| * Sets whether synchronous processing should be strictly used, or Camel |
| * is allowed to use asynchronous processing (if supported). |
| * |
| * The option is a: <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointBuilder synchronous(boolean synchronous) { |
| doSetProperty("synchronous", synchronous); |
| return this; |
| } |
| /** |
| * Sets whether synchronous processing should be strictly used, or Camel |
| * is allowed to use asynchronous processing (if supported). |
| * |
| * The option will be converted to a <code>boolean</code> type. |
| * |
| * Group: advanced |
| */ |
| default AdvancedDirectEndpointBuilder synchronous(String synchronous) { |
| doSetProperty("synchronous", synchronous); |
| return this; |
| } |
| } |
| /** |
| * Direct (camel-direct) |
| * The direct component provides direct, synchronous call to another |
| * endpoint from the same CamelContext. |
| * |
| * Category: core,endpoint |
| * Available as of version: 1.0 |
| * Maven coordinates: org.apache.camel:camel-direct |
| * |
| * Syntax: <code>direct:name</code> |
| * |
| * Path parameter: name (required) |
| * Name of direct endpoint |
| */ |
| default DirectEndpointBuilder direct(String path) { |
| class DirectEndpointBuilderImpl extends AbstractEndpointBuilder implements DirectEndpointBuilder, AdvancedDirectEndpointBuilder { |
| public DirectEndpointBuilderImpl(String path) { |
| super("direct", path); |
| } |
| } |
| return new DirectEndpointBuilderImpl(path); |
| } |
| } |