| Enterprise Integration Patterns |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| |
| // eips: START |
| [width="100%",cols="4,6",options="header"] |
| |======================================================================= |
| | EIP | Description |
| |
| | link:src/main/docs/eips/aggregate-eip.adoc[Aggregate] + |
| `<aggregate>` | Aggregates many messages into a single message |
| |
| | link:src/main/docs/eips/batch-config-eip.adoc[Batch-config] + |
| `<batch-config>` | Configures batch-processing resequence eip. |
| |
| | link:src/main/docs/eips/bean-eip.adoc[Bean] + |
| `<bean>` | Calls a java bean |
| |
| | link:src/main/docs/eips/choice-eip.adoc[Choice] + |
| `<choice>` | Routes messages based on a series of predicates |
| |
| | link:src/main/docs/eips/circuitBreaker-eip.adoc[Circuit Breaker] + |
| `<circuitBreaker>` | Circuit break load balancer |
| |
| | link:src/main/docs/eips/consulConfiguration-eip.adoc[Consul Configuration] + |
| `<consulConfiguration>` | Consul remote service call configuration |
| |
| | link:src/main/docs/eips/convertBodyTo-eip.adoc[Convert Body To] + |
| `<convertBodyTo>` | Converts the message body to another type |
| |
| | link:src/main/docs/eips/customLoadBalancer-eip.adoc[Custom Load Balancer] + |
| `<customLoadBalancer>` | Custom load balancer |
| |
| | link:src/main/docs/eips/delay-eip.adoc[Delay] + |
| `<delay>` | Delays processing for a specified length of time |
| |
| | link:src/main/docs/eips/dnsConfiguration-eip.adoc[Dns Configuration] + |
| `<dnsConfiguration>` | DNS remote service call configuration |
| |
| | link:src/main/docs/eips/dynamicRouter-eip.adoc[Dynamic Router] + |
| `<dynamicRouter>` | Routes messages based on dynamic rules |
| |
| | link:src/main/docs/eips/enrich-eip.adoc[Enrich] + |
| `<enrich>` | Enriches a message with data from a secondary resource |
| |
| | link:src/main/docs/eips/etcdConfiguration-eip.adoc[Etcd Configuration] + |
| `<etcdConfiguration>` | Etcd remote service call configuration |
| |
| | link:src/main/docs/eips/failover-eip.adoc[Failover] + |
| `<failover>` | Failover load balancer |
| |
| | link:src/main/docs/eips/filter-eip.adoc[Filter] + |
| `<filter>` | Filter out messages based using a predicate |
| |
| | link:src/main/docs/eips/from-eip.adoc[From] + |
| `<from>` | Act as a message source as input to a route |
| |
| | link:src/main/docs/eips/hystrix-eip.adoc[Hystrix] + |
| `<hystrix>` | Hystrix Circuit Breaker EIP |
| |
| | link:src/main/docs/eips/hystrixConfiguration-eip.adoc[Hystrix Configuration] + |
| `<hystrixConfiguration>` | Hystrix Circuit Breaker EIP configuration |
| |
| | link:src/main/docs/eips/idempotentConsumer-eip.adoc[Idempotent Consumer] + |
| `<idempotentConsumer>` | Filters out duplicate messages |
| |
| | link:src/main/docs/eips/inOnly-eip.adoc[In Only] + |
| `<inOnly>` | Marks the exchange pattern for the route to one way |
| |
| | link:src/main/docs/eips/inOut-eip.adoc[In Out] + |
| `<inOut>` | Marks the exchange pattern for the route to request/reply |
| |
| | link:src/main/docs/eips/kubernetesConfiguration-eip.adoc[Kubernetes Configuration] + |
| `<kubernetesConfiguration>` | Kubernetes remote service call configuration |
| |
| | link:src/main/docs/eips/loadBalance-eip.adoc[Load Balance] + |
| `<loadBalance>` | Balances message processing among a number of nodes |
| |
| | link:src/main/docs/eips/loop-eip.adoc[Loop] + |
| `<loop>` | Processes a message multiple times |
| |
| | link:src/main/docs/eips/marshal-eip.adoc[Marshal] + |
| `<marshal>` | Marshals data into a specified format for transmission over a transport or component |
| |
| | link:src/main/docs/eips/multicast-eip.adoc[Multicast] + |
| `<multicast>` | Routes the same message to multiple paths either sequentially or in parallel. |
| |
| | link:src/main/docs/eips/onFallback-eip.adoc[On Fallback] + |
| `<onFallback>` | Route to be executed when Hystrix EIP executes fallback |
| |
| | link:src/main/docs/eips/otherwise-eip.adoc[Otherwise] + |
| `<otherwise>` | Route to be executed when all other choices evaluate to false |
| |
| | link:src/main/docs/eips/pipeline-eip.adoc[Pipeline] + |
| `<pipeline>` | Routes the message to a sequence of processors. |
| |
| | link:src/main/docs/eips/pollEnrich-eip.adoc[Poll Enrich] + |
| `<pollEnrich>` | Enriches messages with data polled from a secondary resource |
| |
| | link:src/main/docs/eips/process-eip.adoc[Process] + |
| `<process>` | Calls a Camel processor. |
| |
| | link:src/main/docs/eips/random-eip.adoc[Random] + |
| `<random>` | Random load balancer |
| |
| | link:src/main/docs/eips/recipientList-eip.adoc[Recipient List] + |
| `<recipientList>` | Routes messages to a number of dynamically specified recipients (dynamic to) |
| |
| | link:src/main/docs/eips/removeHeader-eip.adoc[Remove Header] + |
| `<removeHeader>` | Removes a named header from the message |
| |
| | link:src/main/docs/eips/removeHeaders-eip.adoc[Remove Headers] + |
| `<removeHeaders>` | Removes message headers whose name matches a specified pattern |
| |
| | link:src/main/docs/eips/removeProperties-eip.adoc[Remove Properties] + |
| `<removeProperties>` | Removes message exchange properties whose name matches a specified pattern |
| |
| | link:src/main/docs/eips/removeProperty-eip.adoc[Remove Property] + |
| `<removeProperty>` | Removes a named property from the message exchange |
| |
| | link:src/main/docs/eips/resequence-eip.adoc[Resequence] + |
| `<resequence>` | Resequences (re-order) messages based on an expression |
| |
| | link:src/main/docs/eips/ribbonConfiguration-eip.adoc[Ribbon Configuration] + |
| `<ribbonConfiguration>` | Ribbon remote service call configuration |
| |
| | link:src/main/docs/eips/rollback-eip.adoc[Rollback] + |
| `<rollback>` | Forces a rollback by stopping routing the message |
| |
| | link:src/main/docs/eips/roundRobin-eip.adoc[Round Robin] + |
| `<roundRobin>` | Round robin load balancer |
| |
| | link:src/main/docs/eips/routingSlip-eip.adoc[Routing Slip] + |
| `<routingSlip>` | Routes a message through a series of steps that are pre-determined (the slip) |
| |
| | link:src/main/docs/eips/sample-eip.adoc[Sample] + |
| `<sample>` | Extract a sample of the messages passing through a route |
| |
| | link:src/main/docs/eips/script-eip.adoc[Script] + |
| `<script>` | Executes a script from a language which does not change the message body. |
| |
| | link:src/main/docs/eips/serviceCall-eip.adoc[Service Call] + |
| `<serviceCall>` | Remote service call |
| |
| | link:src/main/docs/eips/setBody-eip.adoc[Set Body] + |
| `<setBody>` | Sets the contents of the message body |
| |
| | link:src/main/docs/eips/setFaultBody-eip.adoc[Set Fault Body] + |
| `<setFaultBody>` | Sets the contents of a fault message's body |
| |
| | link:src/main/docs/eips/setHeader-eip.adoc[Set Header] + |
| `<setHeader>` | Sets the value of a message header |
| |
| | link:src/main/docs/eips/setOutHeader-eip.adoc[Set Out Header] + |
| `<setOutHeader>` | *deprecated* Sets the value of a header on the outbound message |
| |
| | link:src/main/docs/eips/setProperty-eip.adoc[Set Property] + |
| `<setProperty>` | Sets a named property on the message exchange |
| |
| | link:src/main/docs/eips/sort-eip.adoc[Sort] + |
| `<sort>` | Sorts the contents of the message |
| |
| | link:src/main/docs/eips/split-eip.adoc[Split] + |
| `<split>` | Splits a single message into many sub-messages. |
| |
| | link:src/main/docs/eips/sticky-eip.adoc[Sticky] + |
| `<sticky>` | Sticky load balancer |
| |
| | link:src/main/docs/eips/stop-eip.adoc[Stop] + |
| `<stop>` | Stops the processing of the current message |
| |
| | link:src/main/docs/eips/stream-config-eip.adoc[Stream-config] + |
| `<stream-config>` | Configures stream-processing resequence eip. |
| |
| | link:src/main/docs/eips/threads-eip.adoc[Threads] + |
| `<threads>` | Specifies that all steps after this node are processed asynchronously |
| |
| | link:src/main/docs/eips/throttle-eip.adoc[Throttle] + |
| `<throttle>` | Controls the rate at which messages are passed to the next node in the route |
| |
| | link:src/main/docs/eips/to-eip.adoc[To] + |
| `<to>` | Sends the message to a static endpoint |
| |
| | link:src/main/docs/eips/toD-eip.adoc[To D] + |
| `<toD>` | Sends the message to a dynamic endpoint |
| |
| | link:src/main/docs/eips/topic-eip.adoc[Topic] + |
| `<topic>` | Topic load balancer |
| |
| | link:src/main/docs/eips/transform-eip.adoc[Transform] + |
| `<transform>` | Transforms the message body based on an expression |
| |
| | link:src/main/docs/eips/unmarshal-eip.adoc[Unmarshal] + |
| `<unmarshal>` | Converts the message data received from the wire into a format that Apache Camel processors can consume |
| |
| | link:src/main/docs/eips/validate-eip.adoc[Validate] + |
| `<validate>` | Validates a message based on an expression |
| |
| | link:src/main/docs/eips/weighted-eip.adoc[Weighted] + |
| `<weighted>` | Weighted load balancer |
| |
| | link:src/main/docs/eips/when-eip.adoc[When] + |
| `<when>` | Triggers a route when an expression evaluates to true |
| |
| | link:src/main/docs/eips/wireTap-eip.adoc[Wire Tap] + |
| `<wireTap>` | Routes a copy of a message (or creates a new message) to a secondary destination while continue routing the original message. |
| |
| |======================================================================= |
| // eips: END |
| |