| // kafka-connector options: START |
| [[camel-braintree-kafka-connector-source]] |
| = camel-braintree-kafka-connector source configuration |
| |
| When using camel-braintree-kafka-connector as source make sure to use the following Maven dependency to have support for the connector: |
| |
| [source,xml] |
| ---- |
| <dependency> |
| <groupId>org.apache.camel.kafkaconnector</groupId> |
| <artifactId>camel-braintree-kafka-connector</artifactId> |
| <version>x.x.x</version> |
| <!-- use the same version as your Camel Kafka connector version --> |
| </dependency> |
| ---- |
| |
| |
| The camel-braintree source connector supports 39 options, which are listed below. |
| |
| |
| |
| [width="100%",cols="2,5,^1,2",options="header"] |
| |=== |
| | Name | Description | Default | Priority |
| | *camel.source.path.apiName* | What kind of operation to perform One of: [ADDON] [ADDRESS] [CLIENTTOKEN] [CREDITCARDVERIFICATION] [CUSTOMER] [DISCOUNT] [DISPUTE] [DOCUMENTUPLOAD] [MERCHANTACCOUNT] [PAYMENTMETHOD] [PAYMENTMETHODNONCE] [PLAN] [REPORT] [SETTLEMENTBATCHSUMMARY] [SUBSCRIPTION] [TRANSACTION] [WEBHOOKNOTIFICATION] | null | HIGH |
| | *camel.source.path.methodName* | What sub operation to use for the selected operation | null | MEDIUM |
| | *camel.source.endpoint.environment* | The environment Either SANDBOX or PRODUCTION | null | MEDIUM |
| | *camel.source.endpoint.inBody* | Sets the name of a parameter to be passed in the exchange In Body | null | MEDIUM |
| | *camel.source.endpoint.merchantId* | The merchant id provided by Braintree. | null | MEDIUM |
| | *camel.source.endpoint.bridgeErrorHandler* | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | MEDIUM |
| | *camel.source.endpoint.sendEmptyMessageWhenIdle* | If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead. | false | MEDIUM |
| | *camel.source.endpoint.exceptionHandler* | To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored. | null | MEDIUM |
| | *camel.source.endpoint.exchangePattern* | Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut] | null | MEDIUM |
| | *camel.source.endpoint.pollStrategy* | A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel. | null | MEDIUM |
| | *camel.source.endpoint.basicPropertyBinding* | Whether the endpoint should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | MEDIUM |
| | *camel.source.endpoint.httpReadTimeout* | Set read timeout for http calls. | null | MEDIUM |
| | *camel.source.endpoint.synchronous* | Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported). | false | MEDIUM |
| | *camel.source.endpoint.backoffErrorThreshold* | The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in. | null | MEDIUM |
| | *camel.source.endpoint.backoffIdleThreshold* | The number of subsequent idle polls that should happen before the backoffMultipler should kick-in. | null | MEDIUM |
| | *camel.source.endpoint.backoffMultiplier* | To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured. | null | MEDIUM |
| | *camel.source.endpoint.delay* | Milliseconds before the next poll. You can also specify time values using units, such as 60s (60 seconds), 5m30s (5 minutes and 30 seconds), and 1h (1 hour). | 500L | MEDIUM |
| | *camel.source.endpoint.greedy* | If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages. | false | MEDIUM |
| | *camel.source.endpoint.initialDelay* | Milliseconds before the first poll starts. You can also specify time values using units, such as 60s (60 seconds), 5m30s (5 minutes and 30 seconds), and 1h (1 hour). | 1000L | MEDIUM |
| | *camel.source.endpoint.repeatCount* | Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever. | 0L | MEDIUM |
| | *camel.source.endpoint.runLoggingLevel* | The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF] | "TRACE" | MEDIUM |
| | *camel.source.endpoint.scheduledExecutorService* | Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool. | null | MEDIUM |
| | *camel.source.endpoint.scheduler* | To use a cron scheduler from either camel-spring or camel-quartz component One of: [none] [spring] [quartz] | "none" | MEDIUM |
| | *camel.source.endpoint.schedulerProperties* | To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler. | null | MEDIUM |
| | *camel.source.endpoint.startScheduler* | Whether the scheduler should be auto started. | true | MEDIUM |
| | *camel.source.endpoint.timeUnit* | Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS] | "MILLISECONDS" | MEDIUM |
| | *camel.source.endpoint.useFixedDelay* | Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details. | true | MEDIUM |
| | *camel.source.endpoint.httpLogLevel* | Set logging level for http calls, see java.util.logging.Level | null | MEDIUM |
| | *camel.source.endpoint.httpLogName* | Set log category to use to log http calls. | "Braintree" | MEDIUM |
| | *camel.source.endpoint.logHandlerEnabled* | Sets whether to enable the BraintreeLogHandler. It may be desirable to set this to 'false' where an existing JUL - SLF4J logger bridge is on the classpath. This option can also be configured globally on the BraintreeComponent. | true | MEDIUM |
| | *camel.source.endpoint.proxyHost* | The proxy host | null | MEDIUM |
| | *camel.source.endpoint.proxyPort* | The proxy port | null | MEDIUM |
| | *camel.source.endpoint.accessToken* | The access token granted by a merchant to another in order to process transactions on their behalf. Used in place of environment, merchant id, public key and private key fields. | null | MEDIUM |
| | *camel.source.endpoint.privateKey* | The private key provided by Braintree. | null | MEDIUM |
| | *camel.source.endpoint.publicKey* | The public key provided by Braintree. | null | MEDIUM |
| | *camel.component.braintree.configuration* | To use the shared configuration | null | MEDIUM |
| | *camel.component.braintree.bridgeErrorHandler* | Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored. | false | MEDIUM |
| | *camel.component.braintree.basicPropertyBinding* | Whether the component should use basic property binding (Camel 2.x) or the newer property binding with additional capabilities | false | MEDIUM |
| | *camel.component.braintree.logHandlerEnabled* | Sets whether to enable the BraintreeLogHandler. It may be desirable to set this to false where an existing JUL - SLF4J logger bridge is on the classpath. | true | MEDIUM |
| |=== |
| // kafka-connector options: END |
