| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # Pylint doesn't play well with fixtures and dependency injection from pytest |
| # pylint: disable=redefined-outer-name |
| |
| import os |
| import sys |
| import shutil |
| import pytest |
| from buildstream._testing import cli # pylint: disable=unused-import |
| from buildstream._testing import create_repo |
| from buildstream import _yaml |
| from buildstream.exceptions import ErrorDomain, LoadErrorReason |
| from buildstream.types import CoreWarnings |
| |
| from tests.testutils import generate_junction |
| |
| from . import configure_project |
| |
| # Project directory |
| DATA_DIR = os.path.join( |
| os.path.dirname(os.path.realpath(__file__)), |
| ) |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| @pytest.mark.parametrize( |
| "target,fmt,expected", |
| [ |
| ("import-bin.bst", "%{name}", "import-bin.bst"), |
| ("import-bin.bst", "%{state}", "buildable"), |
| ("compose-all.bst", "%{state}", "waiting"), |
| ("import-bin.bst", "%{kind}", "import"), |
| ("compose-all.bst", "%{kind}", "compose"), |
| ], |
| ) |
| def test_show(cli, datafiles, target, fmt, expected): |
| project = str(datafiles) |
| result = cli.run(project=project, silent=True, args=["show", "--deps", "none", "--format", fmt, target]) |
| result.assert_success() |
| |
| if result.output.strip() != expected: |
| raise AssertionError("Expected output:\n{}\nInstead received output:\n{}".format(expected, result.output)) |
| |
| |
| @pytest.mark.datafiles( |
| os.path.join( |
| os.path.dirname(os.path.realpath(__file__)), |
| "invalid_element_path", |
| ) |
| ) |
| def test_show_invalid_element_path(cli, datafiles): |
| project = str(datafiles) |
| cli.run(project=project, silent=True, args=["show", "foo.bst"]) |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project_fail")) |
| def test_show_fail(cli, datafiles): |
| project = str(datafiles) |
| result = cli.run(project=project, silent=True, args=["show"]) |
| |
| result.assert_main_error(ErrorDomain.LOAD, LoadErrorReason.INVALID_DATA) |
| |
| |
| # Test behaviors of user supplied glob patterns |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "simple")) |
| @pytest.mark.parametrize( |
| "pattern,expected_elements", |
| [ |
| # Only bst files, same as "**" for `bst show` |
| # |
| ("**.bst", ["import-bin.bst", "import-dev.bst", "compose-all.bst", "target.bst", "subdir/target.bst"]), |
| # Use regular globbing without matching path separators, this should exclude |
| # the target in the subdirectory. |
| # |
| ("*.bst", ["import-bin.bst", "import-dev.bst", "compose-all.bst", "target.bst"]), |
| # Report only targets in the subdirectory |
| # |
| ("subdir/*.bst", ["subdir/target.bst"]), |
| # Report both targets which end in "target.bst" |
| # |
| ("**target.bst", ["target.bst", "subdir/target.bst"]), |
| # All elements starting with the prefix "import" |
| # |
| ("import*.bst", ["import-bin.bst", "import-dev.bst"]), |
| ], |
| ids=["**.bst", "*.bst", "subdir/*", "**target.bst", "import*"], |
| ) |
| def test_show_glob(cli, tmpdir, datafiles, pattern, expected_elements): |
| project = str(datafiles) |
| |
| result = cli.run(project=project, args=["show", "--deps", "none", "--format", "%{name}", pattern]) |
| result.assert_success() |
| |
| output = result.output.strip().splitlines() |
| |
| # Assert that the number of results match the number of expected results |
| assert len(output) == len(expected_elements) |
| |
| # Assert that each expected result was found. |
| for expected in expected_elements: |
| assert expected in output, "Expected result {} not found".format(expected) |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| @pytest.mark.parametrize( |
| "target,except_,expected", |
| [ |
| ("target.bst", "import-bin.bst", ["import-dev.bst", "compose-all.bst", "target.bst"]), |
| ("target.bst", "import-dev.bst", ["import-bin.bst", "compose-all.bst", "target.bst"]), |
| ("target.bst", "compose-all.bst", ["import-bin.bst", "target.bst"]), |
| ("compose-all.bst", "import-bin.bst", ["import-dev.bst", "compose-all.bst"]), |
| ], |
| ) |
| def test_show_except_simple(cli, datafiles, target, except_, expected): |
| project = str(datafiles) |
| result = cli.run( |
| project=project, |
| silent=True, |
| args=["show", "--deps", "all", "--format", "%{name}", "--except", except_, target], |
| ) |
| |
| result.assert_success() |
| |
| results = result.output.strip().splitlines() |
| if results != expected: |
| raise AssertionError("Expected elements:\n{}\nInstead received elements:\n{}".format(expected, results)) |
| |
| |
| # This test checks various constructions of a pipeline |
| # with one or more targets and 0 or more exception elements, |
| # each data set provides the targets, exceptions and expected |
| # result list. |
| # |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "exceptions")) |
| @pytest.mark.parametrize( |
| "targets,exceptions,expected", |
| [ |
| # Test without exceptions, lets just see the whole list here |
| ( |
| ["build.bst"], |
| None, |
| [ |
| "fourth-level-1.bst", |
| "third-level-1.bst", |
| "fourth-level-2.bst", |
| "third-level-2.bst", |
| "fourth-level-3.bst", |
| "third-level-3.bst", |
| "second-level-1.bst", |
| "first-level-1.bst", |
| "first-level-2.bst", |
| "build.bst", |
| ], |
| ), |
| # Test one target and excepting a part of the pipeline, this |
| # removes forth-level-1 and third-level-1 |
| ( |
| ["build.bst"], |
| ["third-level-1.bst"], |
| [ |
| "fourth-level-2.bst", |
| "third-level-2.bst", |
| "fourth-level-3.bst", |
| "third-level-3.bst", |
| "second-level-1.bst", |
| "first-level-1.bst", |
| "first-level-2.bst", |
| "build.bst", |
| ], |
| ), |
| # Test one target and excepting a part of the pipeline, check that |
| # excepted dependencies remain in the pipeline if depended on from |
| # outside of the except element |
| ( |
| ["build.bst"], |
| ["second-level-1.bst"], |
| [ |
| "fourth-level-2.bst", |
| "third-level-2.bst", # first-level-2 depends on this, so not excepted |
| "first-level-1.bst", |
| "first-level-2.bst", |
| "build.bst", |
| ], |
| ), |
| # The same as the above test, but excluding the toplevel build.bst, |
| # instead only select the two toplevel dependencies as targets |
| ( |
| ["first-level-1.bst", "first-level-2.bst"], |
| ["second-level-1.bst"], |
| [ |
| "fourth-level-2.bst", |
| "third-level-2.bst", # first-level-2 depends on this, so not excepted |
| "first-level-1.bst", |
| "first-level-2.bst", |
| ], |
| ), |
| # Test one target and excepting an element outisde the pipeline |
| ( |
| ["build.bst"], |
| ["unrelated-1.bst"], |
| [ |
| "fourth-level-2.bst", |
| "third-level-2.bst", # first-level-2 depends on this, so not excepted |
| "first-level-1.bst", |
| "first-level-2.bst", |
| "build.bst", |
| ], |
| ), |
| # Test one target and excepting two elements |
| ( |
| ["build.bst"], |
| ["unrelated-1.bst", "unrelated-2.bst"], |
| [ |
| "first-level-1.bst", |
| "build.bst", |
| ], |
| ), |
| ], |
| ) |
| def test_show_except(cli, datafiles, targets, exceptions, expected): |
| basedir = str(datafiles) |
| results = cli.get_pipeline(basedir, targets, except_=exceptions, scope="all") |
| if results != expected: |
| raise AssertionError("Expected elements:\n{}\nInstead received elements:\n{}".format(expected, results)) |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| def test_target_is_dependency(cli, datafiles): |
| project = str(datafiles) |
| elements = ["multiple_targets/dependency/zebry.bst", "multiple_targets/dependency/horsey.bst"] |
| |
| args = ["show", "-d", "all", "-f", "%{name}", *elements] |
| result = cli.run(project=project, args=args) |
| |
| result.assert_success() |
| |
| # Get the order |
| names = result.output.splitlines() |
| names = [name[len("multiple_targets/dependency/") :] for name in names] |
| |
| assert names == ["pony.bst", "horsey.bst", "zebry.bst"] |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| @pytest.mark.parametrize("ref_storage", [("inline"), ("project.refs")]) |
| @pytest.mark.parametrize("element_name", ["junction-dep.bst", "junction.bst:import-etc.bst"]) |
| @pytest.mark.parametrize("workspaced", [True, False], ids=["workspace", "no-workspace"]) |
| def test_unfetched_junction(cli, tmpdir, datafiles, ref_storage, element_name, workspaced): |
| project = str(datafiles) |
| subproject_path = os.path.join(project, "files", "sub-project") |
| junction_path = os.path.join(project, "elements", "junction.bst") |
| element_path = os.path.join(project, "elements", "junction-dep.bst") |
| |
| configure_project(project, {"ref-storage": ref_storage}) |
| |
| # Create a repo to hold the subproject and generate a junction element for it |
| ref = generate_junction(tmpdir, subproject_path, junction_path, store_ref=(ref_storage == "inline")) |
| |
| # Create a stack element to depend on a cross junction element |
| # |
| element = {"kind": "stack", "depends": [{"junction": "junction.bst", "filename": "import-etc.bst"}]} |
| _yaml.roundtrip_dump(element, element_path) |
| |
| # Dump a project.refs if we're using project.refs storage |
| # |
| if ref_storage == "project.refs": |
| project_refs = {"projects": {"test": {"junction.bst": [{"ref": ref}]}}} |
| _yaml.roundtrip_dump(project_refs, os.path.join(project, "junction.refs")) |
| |
| # Open a workspace if we're testing workspaced behavior |
| if workspaced: |
| result = cli.run( |
| project=project, |
| silent=True, |
| args=["workspace", "open", "--no-checkout", "--directory", subproject_path, "junction.bst"], |
| ) |
| result.assert_success() |
| |
| # Assert successful bst show (requires implicit subproject fetching) |
| result = cli.run(project=project, silent=True, args=["show", element_name]) |
| result.assert_success() |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| @pytest.mark.parametrize("ref_storage", [("inline"), ("project.refs")]) |
| @pytest.mark.parametrize("workspaced", [True, False], ids=["workspace", "no-workspace"]) |
| def test_inconsistent_junction(cli, tmpdir, datafiles, ref_storage, workspaced): |
| project = str(datafiles) |
| subproject_path = os.path.join(project, "files", "sub-project") |
| junction_path = os.path.join(project, "elements", "junction.bst") |
| element_path = os.path.join(project, "elements", "junction-dep.bst") |
| |
| configure_project(project, {"ref-storage": ref_storage}) |
| |
| # Create a repo to hold the subproject and generate a junction element for it |
| generate_junction(tmpdir, subproject_path, junction_path, store_ref=False) |
| |
| # Create a stack element to depend on a cross junction element |
| # |
| element = {"kind": "stack", "depends": [{"junction": "junction.bst", "filename": "import-etc.bst"}]} |
| _yaml.roundtrip_dump(element, element_path) |
| |
| # Open a workspace if we're testing workspaced behavior |
| if workspaced: |
| result = cli.run( |
| project=project, |
| silent=True, |
| args=["workspace", "open", "--no-checkout", "--directory", subproject_path, "junction.bst"], |
| ) |
| result.assert_success() |
| |
| # Assert the correct error when trying to show the pipeline |
| dep_result = cli.run(project=project, silent=True, args=["show", "junction-dep.bst"]) |
| |
| # Assert the correct error when trying to show the pipeline |
| etc_result = cli.run(project=project, silent=True, args=["show", "junction.bst:import-etc.bst"]) |
| |
| # If a workspace is open, no ref is needed |
| if workspaced: |
| dep_result.assert_success() |
| etc_result.assert_success() |
| else: |
| # Assert that we have the expected provenance encoded into the error |
| element_node = _yaml.load(element_path, shortname="junction-dep.bst") |
| ref_node = element_node.get_sequence("depends").mapping_at(0) |
| provenance = ref_node.get_provenance() |
| assert str(provenance) in dep_result.stderr |
| |
| dep_result.assert_main_error(ErrorDomain.LOAD, LoadErrorReason.SUBPROJECT_INCONSISTENT) |
| etc_result.assert_main_error(ErrorDomain.LOAD, LoadErrorReason.SUBPROJECT_INCONSISTENT) |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| @pytest.mark.parametrize("element_name", ["junction-dep.bst", "junction.bst:import-etc.bst"]) |
| @pytest.mark.parametrize("workspaced", [True, False], ids=["workspace", "no-workspace"]) |
| def test_fetched_junction(cli, tmpdir, datafiles, element_name, workspaced): |
| project = str(datafiles) |
| subproject_path = os.path.join(project, "files", "sub-project") |
| junction_path = os.path.join(project, "elements", "junction.bst") |
| element_path = os.path.join(project, "elements", "junction-dep.bst") |
| |
| # Create a repo to hold the subproject and generate a junction element for it |
| generate_junction(tmpdir, subproject_path, junction_path, store_ref=True) |
| |
| # Create a stack element to depend on a cross junction element |
| # |
| element = {"kind": "stack", "depends": [{"junction": "junction.bst", "filename": "import-etc.bst"}]} |
| _yaml.roundtrip_dump(element, element_path) |
| |
| result = cli.run(project=project, silent=True, args=["source", "fetch", "junction.bst"]) |
| result.assert_success() |
| |
| # Open a workspace if we're testing workspaced behavior |
| if workspaced: |
| result = cli.run( |
| project=project, |
| silent=True, |
| args=["workspace", "open", "--no-checkout", "--directory", subproject_path, "junction.bst"], |
| ) |
| result.assert_success() |
| |
| # Assert the correct error when trying to show the pipeline |
| result = cli.run(project=project, silent=True, args=["show", "--format", "%{name}-%{state}", element_name]) |
| |
| results = result.output.strip().splitlines() |
| assert "junction.bst:import-etc.bst-buildable" in results |
| |
| |
| ############################################################### |
| # Testing recursion depth # |
| ############################################################### |
| @pytest.mark.parametrize("dependency_depth", [100, 150, 1200]) |
| def test_exceed_max_recursion_depth(cli, tmpdir, dependency_depth): |
| project_name = "recursion-test" |
| path = str(tmpdir) |
| project_path = os.path.join(path, project_name) |
| |
| def setup_test(): |
| """ |
| Creates a bst project with dependencydepth + 1 elements, each of which |
| depends of the previous element to be created. Each element created |
| is of type import and has an empty source file. |
| """ |
| os.mkdir(project_path) |
| |
| result = cli.run(silent=True, args=["init", "--project-name", project_name, project_path]) |
| result.assert_success() |
| |
| sourcefiles_path = os.path.join(project_path, "files") |
| os.mkdir(sourcefiles_path) |
| |
| element_path = os.path.join(project_path, "elements") |
| for i in range(0, dependency_depth + 1): |
| element = { |
| "kind": "import", |
| "sources": [{"kind": "local", "path": "files/source{}".format(str(i))}], |
| "depends": ["element{}.bst".format(str(i - 1))], |
| } |
| if i == 0: |
| del element["depends"] |
| _yaml.roundtrip_dump(element, os.path.join(element_path, "element{}.bst".format(str(i)))) |
| |
| source = os.path.join(sourcefiles_path, "source{}".format(str(i))) |
| open(source, "x", encoding="utf-8").close() # pylint: disable=consider-using-with |
| assert os.path.exists(source) |
| |
| setup_test() |
| result = cli.run(project=project_path, silent=True, args=["show", "element{}.bst".format(str(dependency_depth))]) |
| |
| recursion_limit = sys.getrecursionlimit() |
| if dependency_depth <= recursion_limit: |
| result.assert_success() |
| else: |
| # Assert exception is thown and handled |
| assert not result.unhandled_exception |
| assert result.exit_code == -1 |
| |
| shutil.rmtree(project_path) |
| |
| |
| ############################################################### |
| # Testing format symbols # |
| ############################################################### |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| @pytest.mark.parametrize( |
| "dep_kind, expected_deps", |
| [ |
| ("%{deps}", "- import-dev.bst\n- import-links.bst\n- import-bin.bst"), |
| ("%{build-deps}", "- import-dev.bst\n- import-links.bst"), |
| ("%{runtime-deps}", "- import-links.bst\n- import-bin.bst"), |
| ], |
| ids=["deps", "build-deps", "runtime-deps"], |
| ) |
| def test_format_deps(cli, datafiles, dep_kind, expected_deps): |
| project = str(datafiles) |
| target = "format-deps.bst" |
| result = cli.run(project=project, silent=True, args=["show", "--deps", "none", "--format", dep_kind, target]) |
| result.assert_success() |
| |
| expected = "{deps}".format(deps=expected_deps) |
| if result.output.strip() != expected: |
| raise AssertionError("Expected output:\n{}\nInstead received output:\n{}".format(expected, result.output)) |
| |
| |
| # This tests the resolved value of the 'max-jobs' variable, |
| # ensuring at least that the variables are resolved according |
| # to how the user has configured max-jobs |
| # |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| @pytest.mark.parametrize( |
| "cli_value, config_value", |
| [ |
| (None, None), |
| (None, "16"), |
| ("16", None), |
| ("5", "16"), |
| ("0", "16"), |
| ("16", "0"), |
| ], |
| ) |
| def test_max_jobs(cli, datafiles, cli_value, config_value): |
| project = str(datafiles) |
| target = "target.bst" |
| |
| # Specify `--max-jobs` if this test sets it |
| args = [] |
| if cli_value is not None: |
| args += ["--max-jobs", cli_value] |
| args += ["show", "--deps", "none", "--format", "%{vars}", target] |
| |
| # Specify `max-jobs` in user configuration if this test sets it |
| if config_value is not None: |
| cli.configure({"build": {"max-jobs": config_value}}) |
| |
| result = cli.run(project=project, silent=True, args=args) |
| result.assert_success() |
| loaded = _yaml.load_data(result.output) |
| loaded_value = loaded.get_int("max-jobs") |
| |
| # We expect the value provided on the command line to take |
| # precedence over the configuration file value, if specified. |
| # |
| # If neither are specified then we expect the default |
| expected_value = cli_value or config_value or "0" |
| |
| if expected_value == "0": |
| # If we are expecting the automatic behavior of using the maximum |
| # number of cores available, just check that it is a value > 0 |
| assert loaded_value > 0, "Automatic setting of max-jobs didnt work" |
| else: |
| # Check that we got the explicitly set value |
| assert loaded_value == int(expected_value) |
| |
| |
| # This tests that cache keys behave as expected when |
| # dependencies have been specified as `strict` and |
| # when building in strict mode. |
| # |
| # This test will: |
| # |
| # * Build the target once (and assert that it is cached) |
| # * Modify some local files which are imported |
| # by an import element which the target depends on |
| # * Assert that the cached state of the target element |
| # is as expected |
| # |
| # We run the test twice, once with an element which strict |
| # depends on the changing import element, and one which |
| # depends on it regularly. |
| # |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "strict-depends")) |
| @pytest.mark.parametrize( |
| "target, expected_state", |
| [ |
| ("non-strict-depends.bst", "cached"), |
| ("strict-depends.bst", "waiting"), |
| ], |
| ) |
| def test_strict_dependencies(cli, datafiles, target, expected_state): |
| project = str(datafiles) |
| |
| # Configure non strict mode, this will have |
| # an effect on the build and the `bst show` |
| # commands run via cli.get_element_states() |
| cli.configure({"projects": {"test": {"strict": False}}}) |
| |
| result = cli.run(project=project, silent=True, args=["build", target]) |
| result.assert_success() |
| |
| states = cli.get_element_states(project, ["base.bst", target]) |
| assert states["base.bst"] == "cached" |
| assert states[target] == "cached" |
| |
| # Now modify the file, effectively causing the common base.bst |
| # dependency to change it's cache key |
| hello_path = os.path.join(project, "files", "hello.txt") |
| with open(hello_path, "w", encoding="utf-8") as f: |
| f.write("Goodbye") |
| |
| # Now assert that we have the states we expect as a result |
| states = cli.get_element_states(project, ["base.bst", target]) |
| assert states["base.bst"] == "buildable" |
| assert states[target] == expected_state |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| @pytest.mark.parametrize("fatal", [True, False], ids=["fatal", "non-fatal"]) |
| def test_unaliased_url(cli, tmpdir, datafiles, fatal): |
| project = str(datafiles) |
| if fatal: |
| configure_project(project, {"fatal-warnings": [CoreWarnings.UNALIASED_URL]}) |
| |
| result = cli.run(project=project, silent=True, args=["show", "unaliased-tar.bst"]) |
| |
| if fatal: |
| result.assert_main_error(ErrorDomain.PLUGIN, CoreWarnings.UNALIASED_URL) |
| else: |
| result.assert_success() |
| assert "WARNING [unaliased-url]" in result.stderr |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "project")) |
| def test_invalid_alias(cli, tmpdir, datafiles): |
| project = str(datafiles) |
| configure_project(project, {"aliases": {"pony": "https://pony.org/tarballs", "horsy": "http://horsy.tv/shows"}}) |
| result = cli.run(project=project, silent=True, args=["show", "invalid-alias.bst"]) |
| result.assert_main_error(ErrorDomain.SOURCE, "invalid-source-alias") |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "source-info")) |
| @pytest.mark.parametrize( |
| "target, expected_kind, expected_url, expected_medium, expected_version_type, expected_version, expected_guess_version, expected_homepage, expected_issue_tracker", |
| [ |
| ( |
| "local.bst", |
| "local", |
| "files/testfile", |
| "local", |
| "cas-digest", |
| "9391a5943daf287b46520c4289d41cab5f6b33e643f7661bcf620de7f02c1c9b/82", |
| None, |
| None, |
| None, |
| ), |
| ( |
| "tar.bst", |
| "tar", |
| "https://flying-ponies.com/releases/1.2/pony-flight-1.2.3.tgz", |
| "remote-file", |
| "sha256", |
| "9d0c936c78d0dfe3a67cae372c9a2330476ea87a2eec16b2daada64a664ca501", |
| "1.2.3", |
| None, |
| None, |
| ), |
| ( |
| "tar-no-micro.bst", |
| "tar", |
| "https://flying-ponies.com/releases/pony-flight-1.2.tgz", |
| "remote-file", |
| "sha256", |
| "9d0c936c78d0dfe3a67cae372c9a2330476ea87a2eec16b2daada64a664ca501", |
| "1.2", |
| None, |
| None, |
| ), |
| ( |
| "tar-custom-version.bst", |
| "tar", |
| "https://flying-ponies.com/releases/pony_v2_4_93.tgz", |
| "remote-file", |
| "sha256", |
| "9d0c936c78d0dfe3a67cae372c9a2330476ea87a2eec16b2daada64a664ca501", |
| "2.4.93", |
| None, |
| None, |
| ), |
| ( |
| "tar-explicit.bst", |
| "tar", |
| "https://flying-ponies.com/releases/9d0c936c78/pony-flight-release.tgz", |
| "remote-file", |
| "sha256", |
| "9d0c936c78d0dfe3a67cae372c9a2330476ea87a2eec16b2daada64a664ca501", |
| "3.2.1", |
| None, |
| None, |
| ), |
| ( |
| "testsource.bst", |
| "testsource", |
| "http://ponyfarm.com/ponies", |
| "pony-ride", |
| "pony-age", |
| "1234567", |
| "12", |
| None, |
| None, |
| ), |
| ( |
| "user-provenance.bst", |
| "tar", |
| "https://flying-ponies.com/releases/1.2/pony-flight-1.2.3.tgz", |
| "remote-file", |
| "sha256", |
| "9d0c936c78d0dfe3a67cae372c9a2330476ea87a2eec16b2daada64a664ca501", |
| "1.2.3", |
| "https://flying-ponies.com/index.html", |
| "https://bugs.flying-ponies.com/issues", |
| ), |
| ], |
| ids=[ |
| "local", |
| "tar-full-version", |
| "tar-no-micro", |
| "tar-custom-version", |
| "tar-explicit", |
| "testsource", |
| "user-provenance", |
| ], |
| ) |
| def test_source_info( |
| cli, |
| datafiles, |
| target, |
| expected_url, |
| expected_kind, |
| expected_medium, |
| expected_version_type, |
| expected_version, |
| expected_guess_version, |
| expected_homepage, |
| expected_issue_tracker, |
| ): |
| project = str(datafiles) |
| result = cli.run(project=project, silent=True, args=["show", "--format", "%{name}:\n%{source-info}", target]) |
| result.assert_success() |
| |
| loaded = _yaml.load_data(result.output) |
| sources = loaded.get_sequence(target) |
| source_info = sources.mapping_at(0) |
| |
| assert source_info.get_str("kind") == expected_kind |
| assert source_info.get_str("url") == expected_url |
| assert source_info.get_str("medium") == expected_medium |
| assert source_info.get_str("version-type") == expected_version_type |
| assert source_info.get_str("version") == expected_version |
| |
| # Optional fields |
| assert source_info.get_str("version-guess", None) == expected_guess_version |
| assert source_info.get_str("homepage", None) == expected_homepage |
| assert source_info.get_str("issue-tracker", None) == expected_issue_tracker |
| |
| |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "source-info")) |
| def test_source_info_extra_data(cli, datafiles): |
| project = str(datafiles) |
| result = cli.run( |
| project=project, silent=True, args=["show", "--format", "%{name}:\n%{source-info}", "extradata.bst"] |
| ) |
| result.assert_success() |
| |
| loaded = _yaml.load_data(result.output) |
| sources = loaded.get_sequence("extradata.bst") |
| source_info = sources.mapping_at(0) |
| |
| assert source_info.get_str("kind") == "extradata" |
| assert source_info.get_str("url") == "http://ponyfarm.com/ponies" |
| assert source_info.get_str("medium") == "pony-ride" |
| assert source_info.get_str("version-type") == "pony-age" |
| assert source_info.get_str("version") == "1234567" |
| assert source_info.get_str("version-guess", None) == "12" |
| |
| extra_data = source_info.get_mapping("extra-data", None) |
| assert extra_data is not None |
| assert extra_data.get_str("pony", "green") |
| |
| |
| # Test what happens when encountering a source that doesn't implement collect_source_info() |
| # |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "source-info-unimplemented")) |
| @pytest.mark.parametrize( |
| "subdir, expect_fatal", |
| [ |
| ("non-fatal", False), |
| ("fatal", True), |
| ], |
| ids=["non-fatal", "fatal"], |
| ) |
| def test_source_info_unimplemented(cli, datafiles, subdir, expect_fatal): |
| project = os.path.join(str(datafiles), subdir) |
| result = cli.run(project=project, silent=True, args=["show", "--format", "%{source-info}", "unimplemented.bst"]) |
| if expect_fatal: |
| result.assert_main_error(ErrorDomain.PLUGIN, CoreWarnings.UNAVAILABLE_SOURCE_INFO) |
| else: |
| # Assert empty list but no errors for a source not implementing collect_source_info() |
| # |
| # Note that buildstream internal _yaml doesn't support loading a list as a toplevel element |
| # in the stream, so we just assert the string instead. |
| result.assert_success() |
| assert result.output == "[]\n\n" |
| assert "WARNING [unavailable-source-info]" in result.stderr |
| |
| |
| # This checks how Source.collect_source_info() works on a workspace, |
| # in order to do this we use a workspace *on a tarball* which we generate, |
| # so that we avoid the weird case of opening a workspace on a local source. |
| # |
| @pytest.mark.datafiles(os.path.join(DATA_DIR, "source-info")) |
| def test_source_info_workspace(cli, datafiles, tmpdir): |
| project = str(datafiles) |
| element_dir = os.path.join(project, "elements") |
| workspace_path = os.path.join(project, "workspace") |
| |
| # Create a tar repo |
| repo = create_repo("tar", str(tmpdir)) |
| repo.create(os.path.join(str(datafiles), "files")) |
| |
| # Generate an import element for this tarball |
| input_config = { |
| "kind": "import", |
| "sources": [repo.source_config()], |
| } |
| input_file = os.path.join(element_dir, "test-workspace.bst") |
| _yaml.roundtrip_dump(input_config, input_file) |
| |
| # Track the element so that there is a ref (required for workspace checkout) |
| result = cli.run( |
| project=project, |
| silent=True, |
| args=["source", "track", "test-workspace.bst"], |
| ) |
| result.assert_success() |
| |
| # Open a workspace on the tarball |
| result = cli.run( |
| project=project, |
| silent=True, |
| args=["workspace", "open", "--directory", workspace_path, "test-workspace.bst"], |
| ) |
| result.assert_success() |
| |
| # Lets see what happens |
| result = cli.run( |
| project=project, silent=True, args=["show", "--format", "%{name}:\n%{source-info}", "test-workspace.bst"] |
| ) |
| result.assert_success() |
| |
| # Lets check the results |
| loaded = _yaml.load_data(result.output) |
| sources = loaded.get_sequence("test-workspace.bst") |
| source_info = sources.mapping_at(0) |
| |
| # The URL is a local path for a workspace, so we just check it exists |
| assert source_info.get_str("url") is not None |
| assert source_info.get_str("medium") == "workspace" |
| assert source_info.get_str("version-type") == "cas-digest" |
| |
| # Tarball repo generation is not deterministic, so we just assert that there is a digest |
| assert source_info.get_str("version", None) is not None |
| |
| # There is no version guessing for a workspace |
| assert source_info.get_str("version-guess", None) is None |
