| <!-- |
| /* |
| * Copyright 2001-2004 The Apache Software Foundation. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| --> |
| |
| <axisconfig name="AxisJava2.0"> |
| <!-- ================================================= --> |
| <!-- Parameters --> |
| <!-- ================================================= --> |
| <parameter name="hotdeployment">true</parameter> |
| <parameter name="hotupdate">false</parameter> |
| <parameter name="enableMTOM">false</parameter> |
| <parameter name="enableSwA">false</parameter> |
| |
| <!--Uncomment if you want to enable file caching for attachments --> |
| <!--parameter name="cacheAttachments">true</parameter> |
| <parameter name="attachmentDIR"></parameter> |
| <parameter name="sizeThreshold">4000</parameter--> |
| |
| <!--This will give out the timout of the configuration contexts, in milliseconds--> |
| <parameter name="ConfigContextTimeoutInterval">30000</parameter> |
| |
| <!--During a fault, stack trace can be sent with the fault message. The following flag will control --> |
| <!--that behavior.--> |
| <parameter name="sendStacktraceDetailsWithFaults">false</parameter> |
| |
| <!--If there aren't any information available to find out the fault reason, we set the message of the exception--> |
| <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be --> |
| <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag--> |
| <!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.--> |
| <parameter name="DrillDownToRootCauseForFaultReason">false</parameter> |
| |
| <parameter name="userName">admin</parameter> |
| <parameter name="password">axis2</parameter> |
| |
| <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.--> |
| <!--<parameter name="ServicesDirectory">service</parameter>--> |
| <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path--> |
| <!--<parameter name="ModulesDirectory">modules</parameter>--> |
| |
| |
| |
| <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context--> |
| <!--root which can configured using the following contextRoot parameter--> |
| <!--<parameter name="contextRoot">axis2</parameter>--> |
| |
| <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints--> |
| <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this --> |
| <!--context path to proper Axis2 servlets--> |
| <!--<parameter name="servicePath">services</parameter>--> |
| <!--<parameter name="restPath">rest</parameter>--> |
| |
| <!-- Following parameter will completely disable REST handling in Axis2--> |
| <parameter name="disableREST" locked="true">false</parameter> |
| |
| <!-- If you have a front end host which exposes this webservice using a different public URL --> |
| <!-- use this parameter to override autodetected url --> |
| <!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>--> |
| |
| |
| <!-- The way of adding listener to the system--> |
| <!-- <listener class="org.apache.axis2.ObserverIMPL">--> |
| <!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>--> |
| <!-- </listener>--> |
| |
| <!-- ================================================= --> |
| <!-- Deployers --> |
| <!-- ================================================= --> |
| |
| <!--Service deployer , this will alow users to deploy AAR or exploded AAR as axis2 services--> |
| <deployer extension=".aar" directory="services" class="org.apache.axis2.deployment.ServiceDeployer"> |
| <serviceBuilderExtension name ="jwsbuilderExt" class="org.apache.axis2.jaxws.framework.JAXWSServiceBuilderExtension"/> |
| <serviceBuilderExtension name ="wsdlbuilderExt" class="org.apache.axis2.deployment.WSDLServiceBuilderExtension"/> |
| </deployer> |
| |
| |
| <!-- ================================================= --> |
| <!-- Message Receivers --> |
| <!-- ================================================= --> |
| <!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for --> |
| <!--all the other MEP implement it and add the correct entry to here , so that you can refer from--> |
| <!--any operation --> |
| <!--Note : You can ovrride this for a particular service by adding the same element with your requirement--> |
| <messageReceivers> |
| <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only" |
| class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> |
| <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out" |
| class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> |
| <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only" |
| class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> |
| <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out" |
| class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> |
| </messageReceivers> |
| |
| <!-- ================================================= --> |
| <!-- Message Formatter --> |
| <!-- ================================================= --> |
| <!--Following content type to message formatter mapping can be used to implement support for different message --> |
| <!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. --> |
| <messageFormatters> |
| <messageFormatter contentType="application/x-www-form-urlencoded" |
| class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/> |
| <messageFormatter contentType="multipart/form-data" |
| class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/> |
| <messageFormatter contentType="application/xml" |
| class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/> |
| </messageFormatters> |
| |
| <!-- ================================================= --> |
| <!-- Message Builders --> |
| <!-- ================================================= --> |
| <!--Following content type to builder mapping can be used to implement support for different message --> |
| <!--formats in Axis2. These message formats are expected to be resolved based on the content type. --> |
| <messageBuilders> |
| <messageBuilder contentType="application/xml" |
| class="org.apache.axis2.builder.ApplicationXMLBuilder"/> |
| <messageBuilder contentType="application/x-www-form-urlencoded" |
| class="org.apache.axis2.builder.XFormURLEncodedBuilder"/> |
| <messageBuilder contentType="multipart/form-data" |
| class="org.apache.axis2.builder.MultipartFormDataBuilder"/> |
| </messageBuilders> |
| |
| <!-- ================================================= --> |
| <!-- Transport Ins --> |
| <!-- ================================================= --> |
| <transportReceiver name="http" |
| class="org.apache.axis2.transport.http.SimpleHTTPServer"> |
| <parameter name="port">0</parameter> |
| <!-- Here is the complete list of supported parameters (see example settings further below): |
| port: the port to listen on (default 6060) |
| hostname: if non-null, url prefix used in reply-to endpoint references (default null) |
| originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1") |
| requestTimeout: value in millis of time that requests can wait for data (default 20000) |
| requestTcpNoDelay: true to maximize performance and minimize latency (default true) |
| false to minimize bandwidth consumption by combining segments |
| requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25) |
| requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150) |
| note that default queue never fills up: see HttpFactory |
| threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180) |
| note that no such threads can exist with default unbounded request queue |
| threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS) |
| --> |
| <!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> --> |
| <!-- <parameter name="originServer">My-Server/1.1</parameter> --> |
| <!-- <parameter name="requestTimeout">10000</parameter> --> |
| <!-- <parameter name="requestTcpNoDelay">false</parameter> --> |
| <!-- <parameter name="requestCoreThreadPoolSize">50</parameter> --> |
| <!-- <parameter name="RequestMaxThreadPoolSize">100</parameter> --> |
| <!-- <parameter name="threadKeepAliveTime">240000</parameter> --> |
| <!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> --> |
| </transportReceiver> |
| |
| <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ) |
| <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener"> |
| <parameter name="myTopicConnectionFactory"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter> |
| </parameter> |
| |
| <parameter name="myQueueConnectionFactory"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter> |
| </parameter> |
| |
| <parameter name="default"> |
| <parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> |
| <parameter name="java.naming.provider.url">tcp://localhost:61616</parameter> |
| <parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter> |
| </parameter> |
| </transportReceiver>--> |
| |
| <!-- ================================================= --> |
| <!-- Mail Transport Listener --> |
| <!-- This is a sample configuration. It assumes a mail server running in localhost. |
| Listener pops messages that comes to the email address red@localhost. Users |
| password is red. Listener connect to the server every 3000 milliseconds. |
| Parameters with "transport." prefix is Axis2 specific. Others are all from Java Mail API. |
| http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html |
| --> |
| <!-- ================================================= --> |
| <!--<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.SimpleMailListener"> |
| <parameter name="mail.pop3.host">localhost</parameter> |
| <parameter name="mail.pop3.user">red</parameter> |
| <parameter name="mail.store.protocol">pop3</parameter> |
| <parameter name="transport.mail.pop3.password">red</parameter> |
| <parameter name="transport.mail.replyToAddress">red@localhost</parameter> |
| <parameter name="transport.listener.interval">3000</parameter> |
| </transportReceiver>--> |
| |
| <!-- ================================================= --> |
| <!-- Transport Outs --> |
| <!-- ================================================= --> |
| |
| <transportSender name="local" |
| class="org.apache.axis2.transport.local.LocalTransportSender"/> |
| <transportSender name="http" |
| class="org.apache.axis2.transport.http.CommonsHTTPTransportSender"> |
| <parameter name="PROTOCOL">HTTP/1.1</parameter> |
| <parameter name="Transfer-Encoding">chunked</parameter> |
| |
| <!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages --> |
| <!-- <parameter name="OmitSOAP12Action">true</parameter> --> |
| </transportSender> |
| |
| <transportSender name="https" |
| class="org.apache.axis2.transport.http.CommonsHTTPTransportSender"> |
| <parameter name="PROTOCOL">HTTP/1.1</parameter> |
| <parameter name="Transfer-Encoding">chunked</parameter> |
| </transportSender> |
| <!-- |
| <transportSender name="jms" |
| class="org.apache.axis2.transport.jms.JMSSender"/> |
| --> |
| <!-- ================================================= --> |
| <!-- Mail Transport Sender --> |
| <!--Only need to uncomment the sender. Configuration is achieved with every client. |
| At any instant mail host should be given. Sample configuration has been given. |
| http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html |
| --> |
| <!-- ================================================= --> |
| <!--<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender"> |
| <parameter name="mail.smtp.host">localhost</parameter> |
| </transportSender>--> |
| |
| <!-- ================================================= --> |
| <!-- Global Modules --> |
| <!-- ================================================= --> |
| <!-- Comment this to disable Addressing --> |
| <module ref="addressing"/> |
| |
| <module ref="sandesha2"/> |
| |
| <!--Configuring module , providing parameters for modules whether they refer or not--> |
| <!--<moduleConfig name="addressing">--> |
| <!--<parameter name="addressingPara">N/A</parameter>--> |
| <!--</moduleConfig>--> |
| |
| <!-- ================================================= --> |
| <!-- Clustering --> |
| <!-- ================================================= --> |
| <!-- Configure and uncomment following for preparing Axis2 to a clustered environment --> |
| <!-- |
| <cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager"> |
| <parameter name="param1">value1</parameter> |
| <configurationManager class="org.apache.axis2.cluster.tribes.configuration.TribesConfigurationManager"> |
| <listeners> |
| </listeners> |
| </configurationManager> |
| <contextManager class="org.apache.axis2.cluster.tribes.context.TribesContextManager"> |
| <listeners> |
| </listeners> |
| </contextManager> |
| </cluster> |
| --> |
| |
| <!-- ================================================= --> |
| <!-- Phases --> |
| <!-- ================================================= --> |
| <phaseOrder type="InFlow"> |
| <!-- System predefined phases --> |
| <phase name="Transport"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"> |
| <order phase="Transport"/> |
| </handler> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"> |
| <order phase="Transport"/> |
| </handler> |
| </phase> |
| <phase name="Addressing"> |
| <handler name="AddressingBasedDispatcher" |
| class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> |
| <order phase="Addressing"/> |
| </handler> |
| </phase> |
| <phase name="Security"/> |
| <phase name="PreDispatch"/> |
| <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> |
| <handler name="RequestURIOperationDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> |
| <handler name="SOAPMessageBodyBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> |
| |
| <handler name="HTTPLocationBasedDispatcher" |
| class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> |
| </phase> |
| <phase name="RMPhase"/> |
| </phaseOrder> |
| <phaseOrder type="OutFlow"> |
| <!-- user can add his own phases to this area --> |
| <phase name="soapmonitorPhase"/> |
| <phase name="RMPhase"/> |
| <phase name="OperationOutPhase"/> |
| <!--system predefined phase--> |
| <!--these phase will run irrespective of the service--> |
| <phase name="PolicyDetermination"/> |
| <phase name="MessageOut"/> |
| <phase name="Security"/> |
| </phaseOrder> |
| <phaseOrder type="InFaultFlow"> |
| <phase name="Transport"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"> |
| <order phase="Transport"/> |
| </handler> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"> |
| <order phase="Transport"/> |
| </handler> |
| </phase> |
| <phase name="Addressing"> |
| <handler name="AddressingBasedDispatcher" |
| class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> |
| <order phase="Addressing"/> |
| </handler> |
| </phase> |
| <phase name="Security"/> |
| <phase name="PreDispatch"/> |
| <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> |
| <handler name="RequestURIOperationDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> |
| <handler name="SOAPMessageBodyBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> |
| |
| <handler name="HTTPLocationBasedDispatcher" |
| class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> |
| </phase> |
| <phase name="RMPhase"/> |
| </phaseOrder> |
| <phaseOrder type="OutFaultFlow"> |
| <!-- user can add his own phases to this area --> |
| <phase name="soapmonitorPhase"/> |
| <phase name="RMPhase"/> |
| <phase name="OperationOutFaultPhase"/> |
| <phase name="PolicyDetermination"/> |
| <phase name="MessageOut"/> |
| </phaseOrder> |
| </axisconfig> |