| <!-- |
| ~ Licensed to the Apache Software Foundation (ASF) under one |
| ~ or more contributor license agreements. See the NOTICE file |
| ~ distributed with this work for additional information |
| ~ regarding copyright ownership. The ASF licenses this file |
| ~ to you under the Apache License, Version 2.0 (the |
| ~ "License"); you may not use this file except in compliance |
| ~ with the License. You may obtain a copy of the License at |
| ~ |
| ~ http://www.apache.org/licenses/LICENSE-2.0 |
| ~ |
| ~ Unless required by applicable law or agreed to in writing, |
| ~ software distributed under the License is distributed on an |
| ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| ~ KIND, either express or implied. See the License for the |
| ~ specific language governing permissions and limitations |
| ~ under the License. |
| --> |
| |
| <axisconfig name="AxisJava2.0"> |
| <!-- ================================================= --> |
| <!-- Parameters --> |
| <!-- ================================================= --> |
| <parameter name="hotdeployment">true</parameter> |
| <parameter name="hotupdate">false</parameter> |
| <parameter name="enableMTOM">false</parameter> |
| <parameter name="enableSwA">false</parameter> |
| |
| <!--Uncomment if you want to enable file caching for attachments --> |
| <!--parameter name="cacheAttachments">true</parameter> |
| <parameter name="attachmentDIR"></parameter> |
| <parameter name="sizeThreshold">4000</parameter--> |
| |
| <parameter name="EnableChildFirstClassLoading">false</parameter> |
| |
| <!-- |
| The exposeServiceMetadata parameter decides whether the metadata (WSDL, schema, policy) of |
| the services deployed on Axis2 should be visible when ?wsdl, ?wsdl2, ?xsd, ?policy requests |
| are received. |
| This parameter can be defined in the axi2.xml file, in which case this will be applicable |
| globally, or in the services.xml files, in which case, it will be applicable to the |
| Service groups and/or services, depending on the level at which the parameter is declared. |
| This value of this parameter defaults to true. |
| --> |
| <parameter name="exposeServiceMetadata">true</parameter> |
| |
| |
| <!--Uncomment if you want to plugin your own attachments lifecycle implementation --> |
| <!--<attachmentsLifecycleManager class="org.apache.axiom.attachments.lifecycle.impl.LifecycleManagerImpl"/>--> |
| |
| |
| <!--Uncomment if you want to enable the reduction of the in-memory cache of WSDL definitions --> |
| <!--In some server environments, the available memory heap is limited and can fill up under load --> |
| <!--Since in-memory copies of WSDL definitions can be large, some steps can be taken--> |
| <!--to reduce the memory needed for the cached WSDL definitions. --> |
| <!--parameter name="reduceWSDLMemoryCache">true</parameter--> |
| |
| <!--This will give out the timout of the configuration contexts, in milliseconds--> |
| <parameter name="ConfigContextTimeoutInterval">30000</parameter> |
| |
| <!--During a fault, stack trace can be sent with the fault message. The following flag will control --> |
| <!--that behavior.--> |
| <parameter name="sendStacktraceDetailsWithFaults">false</parameter> |
| |
| <!--If there aren't any information available to find out the fault reason, we set the message of the exception--> |
| <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be --> |
| <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag--> |
| <!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.--> |
| <parameter name="DrillDownToRootCauseForFaultReason">false</parameter> |
| |
| <parameter name="userName">admin</parameter> |
| <parameter name="password">axis2</parameter> |
| |
| <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.--> |
| <!--ServicesDirectory only works on the following cases--> |
| <!---File based configurator and in that case the value should be a file URL (http:// not allowed)--> |
| <!---When creating URL Based configurator with URL file:// --> |
| <!--- War based configurator with expanded case , --> |
| |
| <!--All the other scenarios it will be ignored.--> |
| <!--<parameter name="ServicesDirectory">service</parameter>--> |
| <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path--> |
| <!--<parameter name="ModulesDirectory">modules</parameter>--> |
| |
| |
| <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context--> |
| <!--root which can configured using the following contextRoot parameter--> |
| <!--<parameter name="contextRoot">axis2</parameter>--> |
| |
| <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints--> |
| <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this --> |
| <!--context path to proper Axis2 servlets--> |
| <!--<parameter name="servicePath">services</parameter>--> |
| <!--<parameter name="restPath">rest</parameter>--> |
| |
| <!-- Following parameter will completely disable REST handling in Axis2--> |
| <parameter name="disableREST" locked="false">false</parameter> |
| |
| <!-- Following parameter will suppress generation of SOAP 1.2 bindings in auto-generated WSDL files --> |
| <parameter name="disableSOAP12" locked="true">false</parameter> |
| |
| <!-- ================================================= --> |
| <!-- Deployers --> |
| <!-- ================================================= --> |
| |
| <!--Service deployer , this will alow users to deploy AAR or exploded AAR as axis2 services--> |
| <deployer extension=".aar" directory="services" class="org.apache.axis2.deployment.ServiceDeployer"> |
| <serviceBuilderExtension name ="jwsbuilderExt" class="org.apache.axis2.jaxws.framework.JAXWSServiceBuilderExtension"/> |
| <serviceBuilderExtension name ="wsdlbuilderExt" class="org.apache.axis2.deployment.WSDLServiceBuilderExtension"/> |
| </deployer> |
| |
| <!--POJO deployer , this will alow users to drop .class file and make that into a service--> |
| <deployer extension=".class" directory="pojo" class="org.apache.axis2.deployment.POJODeployer"/> |
| <deployer extension=".jar" directory="servicejars" |
| class="org.apache.axis2.jaxws.framework.JAXWSDeployer"/> |
| <deployer extension=".jar" directory="transports" |
| class="org.apache.axis2.deployment.TransportDeployer"/> |
| |
| <!--CORBA deployer , this will alow users to invoke remote CORBA services through Axis2--> |
| <!--<deployer extension=".xml" directory="corba" class="org.apache.axis2.corba.deployer.CorbaDeployer"/>--> |
| |
| <!--<deployer extension=".jsa" directory="rmiservices" class="org.apache.axis2.rmi.deploy.RMIServiceDeployer"/>--> |
| |
| |
| <!-- Following parameter will set the host name for the epr--> |
| <!--<parameter name="hostname" locked="true">myhost.com</parameter>--> |
| |
| <!-- If you have a front end host which exposes this webservice using a different public URL --> |
| <!-- use this parameter to override autodetected url --> |
| <!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>--> |
| |
| <!--By default, JAXWS services are created by reading annotations. WSDL and schema are generated--> |
| <!--using a separate WSDL generator only when ?wsdl is called. Therefore, even if you engage--> |
| <!--policies etc.. to AxisService, it doesn't appear in the WSDL. By setting the following property--> |
| <!--to true, you can create the AxisService using the generated WSDL and remove the need for a--> |
| <!--WSDL generator. When ?wsdl is called, WSDL is generated in the normal way.--> |
| <parameter name="useGeneratedWSDLinJAXWS">false</parameter> |
| |
| <!-- The way of adding listener to the system--> |
| <!-- <listener class="org.apache.axis2.ObserverIMPL">--> |
| <!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>--> |
| <!-- </listener>--> |
| |
| <threadContextMigrators> |
| <threadContextMigrator listId="JAXWS-ThreadContextMigrator-List" |
| class="org.apache.axis2.jaxws.addressing.migrator.EndpointContextMapMigrator"/> |
| </threadContextMigrators> |
| |
| <!-- ================================================= --> |
| <!-- Message Receivers --> |
| <!-- ================================================= --> |
| <!--This is the default MessageReceiver for the system , if you want to have MessageReceivers for --> |
| <!--all the other MEP implement it and add the correct entry to here , so that you can refer from--> |
| <!--any operation --> |
| <!--Note : You can override this for a particular service by adding the same element with your requirement--> |
| <messageReceivers> |
| <messageReceiver mep="http://www.w3.org/ns/wsdl/in-only" |
| class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> |
| <messageReceiver mep="http://www.w3.org/ns/wsdl/in-out" |
| class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> |
| </messageReceivers> |
| |
| <!-- ================================================= --> |
| <!-- Message Formatter --> |
| <!-- ================================================= --> |
| <!--Following content type to message formatter mapping can be used to implement support for different message --> |
| <!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. --> |
| <messageFormatters> |
| <messageFormatter contentType="application/x-www-form-urlencoded" |
| class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/> |
| <messageFormatter contentType="multipart/form-data" |
| class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/> |
| <messageFormatter contentType="application/xml" |
| class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/> |
| <messageFormatter contentType="text/xml" |
| class="org.apache.axis2.transport.http.SOAPMessageFormatter"/> |
| <messageFormatter contentType="application/soap+xml" |
| class="org.apache.axis2.transport.http.SOAPMessageFormatter"/> |
| </messageFormatters> |
| |
| <!-- ================================================= --> |
| <!-- Message Builders --> |
| <!-- ================================================= --> |
| <!--Following content type to builder mapping can be used to implement support for different message --> |
| <!--formats in Axis2. These message formats are expected to be resolved based on the content type. --> |
| <messageBuilders> |
| <messageBuilder contentType="application/xml" |
| class="org.apache.axis2.builder.ApplicationXMLBuilder"/> |
| <messageBuilder contentType="application/x-www-form-urlencoded" |
| class="org.apache.axis2.builder.XFormURLEncodedBuilder"/> |
| <messageBuilder contentType="multipart/form-data" |
| class="org.apache.axis2.builder.MultipartFormDataBuilder"/> |
| </messageBuilders> |
| |
| <!-- ================================================= --> |
| <!-- Transport Ins --> |
| <!-- ================================================= --> |
| <transportReceiver name="http" |
| class="org.apache.axis2.transport.http.SimpleHTTPServer"> |
| <parameter name="port">8080</parameter> |
| <!-- Here is the complete list of supported parameters (see example settings further below): |
| port: the port to listen on (default 6060) |
| hostname: if non-null, url prefix used in reply-to endpoint references (default null) |
| originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1") |
| requestTimeout: value in millis of time that requests can wait for data (default 20000) |
| requestTcpNoDelay: true to maximize performance and minimize latency (default true) |
| false to minimize bandwidth consumption by combining segments |
| requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25) |
| requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150) |
| note that default queue never fills up: see HttpFactory |
| threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180) |
| note that no such threads can exist with default unbounded request queue |
| threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS) |
| --> |
| <!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> --> |
| <!-- <parameter name="originServer">My-Server/1.1</parameter> --> |
| <!-- <parameter name="requestTimeout">10000</parameter> --> |
| <!-- <parameter name="requestTcpNoDelay">false</parameter> --> |
| <!-- <parameter name="requestCoreThreadPoolSize">50</parameter> --> |
| <!-- <parameter name="requestMaxThreadPoolSize">100</parameter> --> |
| <!-- <parameter name="threadKeepAliveTime">240000</parameter> --> |
| <!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> --> |
| </transportReceiver> |
| |
| <!-- This is where you'd put custom transports. See the transports project --> |
| <!-- for more. http://ws.apache.org/commons/transport --> |
| |
| <!-- ================================================= --> |
| <!-- Transport Outs --> |
| <!-- ================================================= --> |
| |
| <transportSender name="local" |
| class="org.apache.axis2.transport.local.LocalTransportSender"/> |
| <transportSender name="http" |
| class="org.apache.axis2.transport.http.impl.httpclient4.HTTPClient4TransportSender"> |
| <parameter name="PROTOCOL">HTTP/1.1</parameter> |
| <parameter name="Transfer-Encoding">chunked</parameter> |
| |
| <!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages --> |
| <!-- <parameter name="OmitSOAP12Action">true</parameter> --> |
| </transportSender> |
| |
| <transportSender name="https" |
| class="org.apache.axis2.transport.http.impl.httpclient4.HTTPClient4TransportSender"> |
| <parameter name="PROTOCOL">HTTP/1.1</parameter> |
| <parameter name="Transfer-Encoding">chunked</parameter> |
| </transportSender> |
| |
| <!-- Please enable this if you need the java transport --> |
| <!-- <transportSender name="java" |
| class="org.apache.axis2.transport.java.JavaTransportSender"/> --> |
| |
| <!-- ================================================= --> |
| <!-- Global Modules --> |
| <!-- ================================================= --> |
| <!-- Comment this to disable Addressing --> |
| <module ref="addressing"/> |
| |
| <!--Configuring module , providing parameters for modules whether they refer or not--> |
| <!--<moduleConfig name="addressing">--> |
| <!--<parameter name="addressingPara">N/A</parameter>--> |
| <!--</moduleConfig>--> |
| |
| <!-- ================================================= --> |
| <!-- Clustering --> |
| <!-- ================================================= --> |
| <!-- |
| To enable clustering for this node, set the value of "enable" attribute of the "clustering" |
| element to "true". The initialization of a node in the cluster is handled by the class |
| corresponding to the "class" attribute of the "clustering" element. It is also responsible for |
| getting this node to join the cluster. |
| --> |
| <clustering class="org.apache.axis2.clustering.tribes.TribesClusteringAgent" enable="false"> |
| |
| <!-- |
| This parameter indicates whether the cluster has to be automatically initalized |
| when the AxisConfiguration is built. If set to "true" the initialization will not be |
| done at that stage, and some other party will have to explictly initialize the cluster. |
| --> |
| <parameter name="AvoidInitiation">true</parameter> |
| |
| <!-- |
| The membership scheme used in this setup. The only values supported at the moment are |
| "multicast" and "wka" |
| |
| 1. multicast - membership is automatically discovered using multicasting |
| 2. wka - Well-Known Address based multicasting. Membership is discovered with the help |
| of one or more nodes running at a Well-Known Address. New members joining a |
| cluster will first connect to a well-known node, register with the well-known node |
| and get the membership list from it. When new members join, one of the well-known |
| nodes will notify the others in the group. When a member leaves the cluster or |
| is deemed to have left the cluster, it will be detected by the Group Membership |
| Service (GMS) using a TCP ping mechanism. |
| --> |
| <parameter name="membershipScheme">multicast</parameter> |
| |
| <!-- |
| The clustering domain/group. Nodes in the same group will belong to the same multicast |
| domain. There will not be interference between nodes in different groups. |
| --> |
| <parameter name="domain">wso2.carbon.domain</parameter> |
| |
| <!-- |
| When a Web service request is received, and processed, before the response is sent to the |
| client, should we update the states of all members in the cluster? If the value of |
| this parameter is set to "true", the response to the client will be sent only after |
| all the members have been updated. Obviously, this can be time consuming. In some cases, |
| such this overhead may not be acceptable, in which case the value of this parameter |
| should be set to "false" |
| --> |
| <parameter name="synchronizeAll">true</parameter> |
| |
| <!-- |
| The maximum number of times we need to retry to send a message to a particular node |
| before giving up and considering that node to be faulty |
| --> |
| <parameter name="maxRetries">10</parameter> |
| |
| <!-- The multicast address to be used --> |
| <parameter name="mcastAddress">228.0.0.4</parameter> |
| |
| <!-- The multicast port to be used --> |
| <parameter name="mcastPort">45564</parameter> |
| |
| <!-- The frequency of sending membership multicast messages (in ms) --> |
| <parameter name="mcastFrequency">500</parameter> |
| |
| <!-- The time interval within which if a member does not respond, the member will be |
| deemed to have left the group (in ms) |
| --> |
| <parameter name="memberDropTime">3000</parameter> |
| |
| <!-- |
| The IP address of the network interface to which the multicasting has to be bound to. |
| Multicasting would be done using this interface. |
| --> |
| <parameter name="mcastBindAddress">127.0.0.1</parameter> |
| |
| <!-- The host name or IP address of this member --> |
| <parameter name="localMemberHost">127.0.0.1</parameter> |
| |
| <!-- |
| The TCP port used by this member. This is the port through which other nodes will |
| contact this member |
| --> |
| <parameter name="localMemberPort">4000</parameter> |
| |
| <!-- |
| Preserve message ordering. This will be done according to sender order. |
| --> |
| <parameter name="preserveMessageOrder">true</parameter> |
| |
| <!-- |
| Maintain atmost-once message processing semantics |
| --> |
| <parameter name="atmostOnceMessageSemantics">true</parameter> |
| |
| <!-- |
| Properties specific to this member |
| --> |
| <parameter name="properties"> |
| <property name="backendServerURL" value="https://${hostName}:${httpsPort}/services/"/> |
| <property name="mgtConsoleURL" value="https://${hostName}:${httpsPort}/"/> |
| </parameter> |
| |
| <!-- |
| The list of static or well-known members. These entries will only be valid if the |
| "membershipScheme" above is set to "wka" |
| --> |
| <members> |
| <member> |
| <hostName>127.0.0.1</hostName> |
| <port>4000</port> |
| </member> |
| <member> |
| <hostName>127.0.0.1</hostName> |
| <port>4001</port> |
| </member> |
| </members> |
| |
| <!-- |
| Enable the groupManagement entry if you need to run this node as a cluster manager. |
| Multiple application domains with different GroupManagementAgent implementations |
| can be defined in this section. |
| --> |
| <groupManagement enable="false"> |
| <applicationDomain name="apache.axis2.application.domain" |
| description="Axis2 group" |
| agent="org.apache.axis2.clustering.management.DefaultGroupManagementAgent"/> |
| </groupManagement> |
| |
| <!-- |
| This interface is responsible for handling management of a specific node in the cluster |
| The "enable" attribute indicates whether Node management has been enabled |
| --> |
| <nodeManager class="org.apache.axis2.clustering.management.DefaultNodeManager" |
| enable="true"/> |
| |
| <!-- |
| This interface is responsible for handling state replication. The property changes in |
| the Axis2 context hierarchy in this node, are propagated to all other nodes in the cluster. |
| |
| The "excludes" patterns can be used to specify the prefixes (e.g. local_*) or |
| suffixes (e.g. *_local) of the properties to be excluded from replication. The pattern |
| "*" indicates that all properties in a particular context should not be replicated. |
| |
| The "enable" attribute indicates whether context replication has been enabled |
| --> |
| <stateManager class="org.apache.axis2.clustering.state.DefaultStateManager" |
| enable="true"> |
| <replication> |
| <defaults> |
| <exclude name="local_*"/> |
| <exclude name="LOCAL_*"/> |
| </defaults> |
| <context class="org.apache.axis2.context.ConfigurationContext"> |
| <exclude name="local_*"/> |
| </context> |
| <context class="org.apache.axis2.context.ServiceGroupContext"> |
| <exclude name="local_*"/> |
| </context> |
| <context class="org.apache.axis2.context.ServiceContext"> |
| <exclude name="local_*"/> |
| </context> |
| </replication> |
| </stateManager> |
| </clustering> |
| |
| <!-- ================================================= --> |
| <!-- Phases --> |
| <!-- ================================================= --> |
| <phaseOrder type="InFlow"> |
| <!-- System predefined phases --> |
| <phase name="Transport"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"> |
| <order phase="Transport"/> |
| </handler> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"> |
| <order phase="Transport"/> |
| </handler> |
| </phase> |
| <phase name="Addressing"> |
| <handler name="AddressingBasedDispatcher" |
| class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> |
| <order phase="Addressing"/> |
| </handler> |
| </phase> |
| <phase name="Security"/> |
| <phase name="PreDispatch"/> |
| <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> |
| <handler name="RequestURIOperationDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> |
| <handler name="SOAPMessageBodyBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> |
| <handler name="HTTPLocationBasedDispatcher" |
| class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> |
| <handler name="GenericProviderDispatcher" |
| class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/> |
| <handler name="MustUnderstandValidationDispatcher" |
| class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/> |
| </phase> |
| <phase name="RMPhase"/> |
| <!-- System predefined phases --> |
| <!-- After Postdispatch phase module author or service author can add any phase he want --> |
| <phase name="OperationInPhase"> |
| <handler name="MustUnderstandChecker" |
| class="org.apache.axis2.jaxws.dispatchers.MustUnderstandChecker"> |
| <order phase="OperationInPhase"/> |
| </handler> |
| </phase> |
| <phase name="soapmonitorPhase"/> |
| </phaseOrder> |
| <phaseOrder type="OutFlow"> |
| <!-- user can add his own phases to this area --> |
| <phase name="soapmonitorPhase"/> |
| <phase name="OperationOutPhase"/> |
| <!--system predefined phase--> |
| <!--these phase will run irrespective of the service--> |
| <phase name="RMPhase"/> |
| <phase name="PolicyDetermination"/> |
| <phase name="MessageOut"/> |
| <phase name="Security"/> |
| </phaseOrder> |
| <phaseOrder type="InFaultFlow"> |
| <phase name="Addressing"> |
| <handler name="AddressingBasedDispatcher" |
| class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> |
| <order phase="Addressing"/> |
| </handler> |
| </phase> |
| <phase name="Security"/> |
| <phase name="PreDispatch"/> |
| <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> |
| <handler name="RequestURIBasedDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> |
| <handler name="SOAPActionBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> |
| <handler name="RequestURIOperationDispatcher" |
| class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> |
| <handler name="SOAPMessageBodyBasedDispatcher" |
| class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> |
| <handler name="HTTPLocationBasedDispatcher" |
| class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> |
| <handler name="GenericProviderDispatcher" |
| class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/> |
| <handler name="MustUnderstandValidationDispatcher" |
| class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/> |
| </phase> |
| <phase name="RMPhase"/> |
| <!-- user can add his own phases to this area --> |
| <phase name="OperationInFaultPhase"/> |
| <phase name="soapmonitorPhase"/> |
| </phaseOrder> |
| <phaseOrder type="OutFaultFlow"> |
| <!-- user can add his own phases to this area --> |
| <phase name="soapmonitorPhase"/> |
| <phase name="OperationOutFaultPhase"/> |
| <phase name="RMPhase"/> |
| <phase name="PolicyDetermination"/> |
| <phase name="MessageOut"/> |
| <phase name="Security"/> |
| </phaseOrder> |
| </axisconfig> |
| |