| # |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| |
| # Translation instructions. |
| # 1. Each message line is of the form key=value. |
| # Translate the value, DO NOT translate the key. |
| # 2. The messages may contain arguments that will be filled in |
| # by the runtime. These are of the form: {0}, {1}, etc. |
| # These must appear as is in the message, though the order |
| # may be changed to support proper language syntax. |
| # 3. If a single quote character is to appear in the resulting |
| # message, it must appear in this file as two consecutive |
| # single quote characters. |
| # 4. Lines beginning with "#" (like this one) are comment lines |
| # and may contain translation instructions. They need not be |
| # translated unless your translated file, rather than this file, |
| # will serve as a base for other translators. |
| # |
| # Do not remove the following comment line. It is a variable used by a translation tool. |
| # NLS_MESSAGEFORMAT_VAR |
| # NLS_ENCODING=UNICODE |
| # ISMESSAGEFILE TRUE |
| |
| ############################################################################# |
| # DO NOT TOUCH THESE PROPERTIES - THEY ARE AUTOMATICALLY UPDATED BY THE BUILD |
| # PROCESS. |
| axisVersion=Apache Axis2 version: @axisVersion@ |
| axisVersionRaw=@axisVersion@ |
| axisBuiltOnRaw=@TODAY@ |
| axisUserAgent=Axis/@axisVersion@ |
| builtOn=Built on @TODAY@ |
| ############################################################################# |
| |
| threadpoolshutdown=Thread pool is shut down. |
| errorWhileSafeShutDown=Error during safe shutdown |
| invaliduser=The user name is not valid. |
| invalidSOAPversion=The SOAP URI is not valid. Axis2 supports SOAP Version 1.1 and 1.2 only. |
| cannotInferTransport=The system cannot infer the transport information from the {0} URL. |
| cannotInferTransportNoAddr=Address information does not exist in the Endpoint Reference (EPR).The system cannot infer the transport mechanism. |
| cannotBeNullAxisOperation=The Axis operation cannot be null. |
| cannotBeNullServiceContext=The ServiceContext cannot be null. |
| cannotBeNullConfigurationContext=The ConfigurationContext cannot be null. |
| cannotBeNullOperationContext=The OperationContext cannot be null. |
| nowhereToSendError=The return response path is missing and faultTo is not specified. |
| errorwhileProcessingFault=An error occurred while processing the fault. See the previous error in the stack trace for more information. |
| unSupportedMEP=An unsupported message exchange pattern (MEP) exists in {0}. |
| mepClientSupportOnly=This message exchange pattern (MEP) client supports {0} only and the supplied Axis operations supports {1}. |
| inputstreamNull=The input stream for an incoming message is null. |
| unknownTransport=An unknown transport called {0} exists. |
| paramIsNotSpecified=The {0} parameter is not specified. |
| groovyNoanswer=An answer has not been received from groovy. |
| groovyUnableToLoad=The system cannot load {0} |
| outMessageNull=The out message is NULL, nothing to write. |
| canNotBeNull={0} cannot be NULL. |
| notFound={0} cannot be found. |
| transportError=Transport error: {0} Error: {1} |
| httpTransportError=HTTP Transport error: ''{0}'' - ''{1}'' |
| preatureEOS=A premature end of stream has occurred. |
| responseTimeOut=Time out while waiting for the server to send the response. |
| callBackCompletedWithError=The callback complete, but there was no envelope element or an error. |
| 2channelNeedAddressing=To use two transport channels you must use the WS-Addressing module. |
| useSeparateListenerLimited=Setting useSeparateListener to false is not a valid option when the Sender is {0} and Listener is {1} |
| replyNeedStarting=Before requesting the ReplyTo value, the system must start the TransportListener. The Transport is {0} |
| failedToOpenSocket=The system failed to open the socket. |
| noRecep4Email=A recipient is not specified in the e-mail message. |
| unknownMsgLabel=An unknown message label has been encountered: {0} |
| cannotCorrelateMsg= The system cannot correlate the {0} message operation to RelatesTo {1} |
| addAfterInvoke00={0}: The chain already has been invoked. |
| #AandBdonotmatch=The {0} value does not match {1} value. The system expected the {2} value, but found the {3} value. |
| rpcNeedmatchingChild=The remote procedure call (RPC) style expects the immediate child of the SOAP body. |
| unknownStyle=The {0} style is an unknown style. |
| rawXmlProviderIsLimited=The XML provider supports only the methods that contain the public OMElement <method-name>(OMElement) signature where the method-name variable can be any value. |
| methodNotImplemented=The implementation class does not define a method called |
| methodDoesNotExistInOut=The ServiceClass object does not implement the required method in the following form: OMElement {0}(OMElement e) |
| methodDoesNotExistInOnly=RawInOnlyXMLMessageReceiver can not handle this scenario since ServiceClass has implemented to take Non OMElement as method arguments. |
| implReturnedNull=The implementation class returned a null value. |
| invalidMethodName=The {0} method name is not valid for the service implementation class. |
| blockInvocationExpectsRes=The blocking invocation does not contain a response. |
| serviceGroupIDNotFound=The SOAP session information cannot be retrieved from the correlation id that was received. |
| |
| # Client |
| operationnotfound=The {0} operation cannot be found. |
| unsupportedyype=An unsupported type exists. |
| unknownsoapversion=The system does not recognize the SOAP version. |
| cannotfindamoduletoprocess=The system cannot find a module to process {0} type assertions. |
| noendpointfound=An endpoint cannot be found in the Service {0} |
| endpointnotfound=An endpoint cannot be found. |
| unsupportdmep=An unsupported message exchange pattern (MEP) exists. |
| noservicefound=A service was not located. |
| |
| # context |
| servicenotfound=A service cannot be located. |
| threadpoolset=The thread pool is already set. |
| transportiniterror=A transport-OUT initialization error: {0} |
| invalidserviceinagroup=The {0} service, which is not valid, does not belong to the {1} service group. |
| cannotFlushRootNull=Context cannot be flushed since the root context is null |
| |
| # Deployment Errors |
| invalidWSDLFound=The WSDL file found in the service archive file is not valid. The WSDL file must have either http://www.w3.org/2006/01/wsdl or http://www.w3.org/2004/03/wsdl as the namespace of the document element. |
| #wsdlfilenotfound=The WSDL file cannot be found for the service: {0} |
| servicexmlnotfound=The services.xml file cannot be found for the service: {0} |
| modulexmlnotfound=The module.xml file cannot be found for the module: {0} |
| classnotfound=The {0} class cannot be found. |
| fileNotFound=The {0} file cannot be found. |
| repocannotbebull=The Axis2 repository cannot be null. |
| confignotfound=The system cannot find the axis2.xml file. |
| pathtoconfigcanotnull=The path to axis2.xml file cannot be NULL. |
| modulevalfailed=Module validation failed: {0} |
| invalidphase=Did not find the desired phase ''{0}'' while deploying handler ''{1}''. |
| dispatchPhaseNotFoundOnInflow=The 'Dispatch' phase is not found on the global 'InFlow' phase of the axis2.xml file. Make sure the phase is within the axis2.xml file. |
| #invalidmoduleref=The {0} service refers to the {1} module, which is not valid. |
| invalidmodulerefbyop={0} operation refers to the {1} module, which is not valid. |
| addingnewmodule=Adding new module |
| settingcl=The service is setting the {0} class loader. |
| deployingws=Deploying Web service: {0} - {1} |
| invalidservice=The {0} service, which is not valid, caused {1} |
| deployingmodule=Deploying module: {0} - {1} |
| deployingpojo=Deploying pojo: {0} - {1} |
| invalidmodule=The {0} module, which is not valid, caused {1} |
| serviceremoved=Undeploying Web service: {0} |
| typemappingnotallowed=Type Mappings are not allowed in the axis2.xml file. |
| errorinloadingmr=A {0} error occurred in loading the message receiver {1} |
| errorinloadingts=A {0} error occurred in loading the transport sender {1} |
| errorloadingbuilder=A {0} error occurred while validating the message builder {1} |
| errorloadingformatter=A {0} error occurred while validating the message formatter {1} |
| invalidconfigattribute=Attributes exist in the axis2.xml file that are not valid. {0} {1} |
| undefinedFlowType=An undefined flow type exists in {0} |
| flowtypeisrequird=The flow type is a required attribute in {0} |
| elementisnotallow=The {0} element is not allowed in the axis2.xml file. |
| # outflownotallowedintrin is not used |
| #outflownotallowedintrin=OUTFlow does not support in AxisTransportIN {0} |
| unknownelement=This element is unknown: {0} |
| inflownotallowedintrout=InFlow is not supported in TransportOutDescription {0} |
| badarguforservice=The {0} arguments are not valid for the {1} service. |
| typemappingnotimpl=Type mapping support is not available. |
| beanmappingnotimpl=Bean mapping support is not available. |
| modulenotfound=The {0} module is not valid or has not been deployed. |
| badparaagu=bad parameter arguments. name cannot be null : {0} |
| badlistagu=The listener arguments are not valid. |
| # invalidhandlerdif and thisshouldbeimplement are not used. |
| #invalidhandlerdif= The Handler cannot have both a name and a ref {0} |
| #thisshouldbeimplment=This should be implemented {0} |
| opnotfoundinwsdl=The {0} Operation Name cannot be found in the WSDL file. |
| # badopeattribute and unknownelementinop are not used. |
| #badopattribute=An attribute that is not valid was found in the operation: {0} |
| #unknownelementinop=An unknown element exists in the operation: {0} |
| modulecannothavrbothnameandref=A module cannot have both a name and a ref {0}. |
| invalideleinmodule=The {0} element is not allowed in the module.xml file. |
| # invalidphase01 is not used. |
| #invalidphase01=Invalid Phase : {0} for the handler {1} does not exit in axis2.xml or refering to phase in different flow |
| invalidmodulerefbyconfig=A reference by the axis2.xml file is made to the {0} module, which is not valid. |
| phasedosenotspecified=A Phase is specified for the {0} handler. |
| servicemodulecannothaveglobal=A service-specific module cannot refer system pre-defined phases: {0} |
| fnf=The file cannot be found. |
| fnf_e=The {0} file cannot be found. |
| StreamException=XMLStreamException : {0} |
| mnf={0} : The module cannot be found. |
| invalid_storage=The definition of the storage class is not valid because the class name is missing. |
| no_dispatcher_found=A dispatcher cannot be found and cannot continue. |
| noMetaInf=Invalid service. META-INF directory not found. |
| ivs=Invalid service. META-INF directory not found. |
| badModuleFromOperation=An error occurred in the {0} engaging module to the {1} operation. A module reference that is not valid exists at the operation. |
| badModuleFromService=An error occurred in the {0} engaging module to the {1} service. A module reference that is not valid exists at the service. |
| InstantiationException=An InstantiationException error occurred in Axis storage processing {0} |
| IllegalAccessException=An IllegalAccessException error occurred in Axis storage processing {0} |
| transportSenderError=The TransportSender implementation class is required for the transport {0} |
| obsererror=An implemenation class of the Observer object is required. |
| invalidmoduleconfig=A module configuration exists that is not valid. |
| invalidhandler=Invalid handler config! Name: {0} Reason: {1} |
| parameterlockederror=The {0} parameter is locked at the top level and cannot be overridden. |
| op_error=Processing Operations Modules with an error of {0} |
| servicenameeror=A service name is required. |
| invalid_op=The operation is not valid: {0} |
| cannotCorrelateMsg01=Cannot correlate MessageID {1} to {0} |
| fileExistsNoOverwrite=The {0} file cannot be overwritten. |
| cannotConnectError=Unable to connect |
| failedJMSConnectorShutdown=A failure occurred in the JMSConnectorShutdown |
| errorinschemagen=The following error occurred during schema generation: {0} |
| errorininputstreamclose=An error occurred in closing input stream. |
| phaseclassnotfound=The system cannot find the phase class: {0} : {1} |
| modulenamecannotbenull=The following attribute /defaultModuleVersions/module/@name is not set in axis2.xml |
| moduleversioncannotbenull=The following attribute /defaultModuleVersions/module/@version is not set in axis2.xml |
| # documentcreatingerror is not used. |
| #documentcreatingerror=An exception occurred when creating the document from the WSDL file: {0} |
| noserviceelemtfound=The javax.wsdl.Service element cannot be found. |
| serviceporterror=The system must specify at least one port. |
| soapbindingerror=The system must specify at least one port with a SOAP binding. |
| axisoperationcreateerror=An exception when creating AxisOperation for the AxisService: {0} |
| wrapperelementcreaterror=An exception occurred when creating the wrapper element. |
| policyprocessingerror=An exception occurred when processing policy elements. |
| bothrepoandconfignull=The repository location is not specified and the axis2.xml file is not provided. The system will use the default configuration, which uses the default_axis2.xml file. |
| cannotfindrepo=The system cannot locate the specified repository location: {0} |
| norepofoundinaxis2=A repository location is not found in the axis2.xml file. |
| noservicedirfound=No services directory was found under {0}. |
| nomoduledirfound=No modules directory was found under {0}. |
| confdirnotfound=The conf directory cannot be found and the axis2.xml file is not provided. The system will use the default_axis2.xml file. |
| noaxis2xmlfound=The axis2.xml file cannot be found in conf directory. The system will use the default_axis2.xml file. |
| badelementfound=The system was looking for the ''{0}'' element, but it found ''{1}'' |
| messagelabelcannotfound=The message label cannot be null. |
| paramterlockedbyparent=The {0} parameter is already locked and the value cannot be overridden. |
| modulealredyengaged=The {0} module is already engaged. The operation has been stopped. |
| mepmappingerror=The system cannot map the message exchange pattern (MEP) URI to a constant value for the axis2 MEP. |
| mepnotyetimplemented=The message exchange pattern (MEP) {0} has not implemented the createClient method. |
| modulealredyengagetoservice=The system is attempting to engage a module that is already engaged: {0} |
| invalidoperation=The following operation is not valid: {0} |
| noschemafound=A schema cannot be found for the service. |
| modulenotavailble=The system is attempting to engage a module that is not available: {0} |
| modulealredyengagedtoservicegroup=The {0} module has already been engaged on the service group. The operation has been stopped. |
| servicenotfoundinwsdl=The {0} service cannot be found in the WSDL file. |
| noservicefoundinwsdl=The service cannot be found in the given WSDL file. |
| noporttypefoundfor=A port cannot be found for the {0} port name. |
| noporttypefound=A port cannot be found in the service element. |
| modulenf=A module cannot be found. |
| mepcompleted=A message was added that is not valid. However, the operation context was complete. |
| invalidacess= An access occurred that is not valid. |
| mepiscomplted=The message exchange pattern (MEP) is already complete. Use the reset method before re-running. |
| outmsgctxnull=The out message context is null. Set the out message context before calling this method. |
| cannotreset=The message exchange pattern (MEP) is not complete. Cannot reset |
| cannotaddmsgctx=The system cannot add the message context again until client runs. |
| clusterImplNotFound=Clustering implementation class {0} not found |
| contextManagerListenerIsNull=Cluster ContextManager entry not found in axis2.xml |
| configurationManagerListenerIsNull=Cluster ConfigurationManager entry not found in axis2.xml |
| cannotLoadClusterImpl=Cluster implementation cannot be loaded |
| classAttributeNotFound=The element {0} must have an attribute with the name ''class'' |
| |
| #Policy |
| emptypolicy=The Policy ID is either null or empty. |
| # outMessageNull is not used. |
| #outMessageNull=The out message is null. |
| malformedURLException00=MalformedURLException: |
| exception00=Exception: |
| #Byte code reading for Java2WSDL |
| badClassFile00=An error occurred when looking for parameter names in the bytecode. The input might not be a valid class file. |
| cantLoadByecode=The system cannot load the bytecode for the class "{0}" |
| unexpectedEOF00=An error occurred when looking for the parameter names in the bytecode. The end of the file was reached unexpectedly. |
| unexpectedBytes00=An error occurred when looking for the parameter names in the bytecode. There are unexpected bytes in the file. |
| #description |
| servicefound=Found AxisService : {0} |
| operationfound=Found AxisOperation : {0} |
| checkingoperation=The system is checking for the operation using the following WSAAction: {0} |
| checkingserviceforepr=The system is checking for the service using the following toEPR address: {0} |
| checkingrelatesto=The system is checking the following RelatesTo: {0} |
| twoservicecannothavesamename=Two services cannot have same name. A service with the {0} name already exists in the system. |
| cannotaddapplicationscopeservice=The system cannot add a service with application scope after the system has started. |
| invalidservicegroupname=The {0} service group name is not valid. |
| modulealredyengagedglobaly=An attempt was made to engage the {0} module, which is already engaged. |
| refertoinvalidmodule=A reference was made to a module that has not been deployed. |
| serviceinactive=The system is attempting to access an inactive service: {0} |
| servicenamenotvalid=The {0} service name in not valid. |
| enginestarted=The Axis engine started. |
| mustunderstandfailed=Must Understand check failed for header {0} : {1} |
| mustunderstandfailed2=Must Understand check failed for headers: {0} |
| receivederrormessage=The system received an error message with the {0} ID. |
| servicenotfoundforepr=The service cannot be found for the endpoint reference (EPR) {0} |
| bindingDisabled={0} binding is disabled for this service. |
| operationnotfoundforepr=The endpoint reference (EPR) for the Operation not found is {0} and the WSA Action = {1} |
| operationnotfoundforepr2=The endpoint reference (EPR) for the Operation not found is {0} and the WSA Action = {1}. If this EPR was previously reachable, please contact the server administrator. |
| unabletofindservice=The requested service could not be found -- the operation has been stopped. |
| invalidservicegrouoid=The {0} Service Group ID is not valid. |
| servicenotfoundinthesystem=The {0} service is not found in the system. |
| transportnotfound=The transport is not found: {0} |
| CannotConfigureAxis2=The system cannot configure Axis2. |
| wsaddressingrequirednotpresent=WS-Addressing is required, but it cannot be found. |
| nomessagereciever=Message Receiver not found for AxisOperation: {0} |
| duplicaterelatesto=The message is a duplicate (has the same reply relationship value) of an already processed message. RelatesTo = {0} |
| getMessageContextError=The message context could not be retrieved due to the following error: {0} |
| mismatchedModuleVersions=Tried to deploy (to {0}) a module ''{1}'' when ''{2}'' was already deployed - version mismatch! |
| deployingexception=Deploying Exception Occured with {0} |
| stroringfaultyservice=Exception occured and made the service faulty with {0} |
| jaxwsjarsmissing=JAXWS jars are missing in the classpath with {0}, switching to annongen |
| faultyserviceremoval=Predicting faulty service with {0}, and removing it |