modules/kernel/conf/axis2.xml - axis-axis2-java-core - Git at Google

 <!--
 /*
  * Copyright 2001-2004 The Apache Software Foundation.
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
  -->

 <axisconfig name="AxisJava2.0">
     <!-- ================================================= -->
     <!-- Parameters -->
     <!-- ================================================= -->
     <parameter name="hotdeployment">true</parameter>
     <parameter name="hotupdate">false</parameter>
     <parameter name="enableMTOM">false</parameter>
     <parameter name="enableSwA">false</parameter>

     <!--Uncomment if you want to enable file caching for attachments -->
     <!--parameter name="cacheAttachments">true</parameter>
     <parameter name="attachmentDIR"></parameter>
     <parameter name="sizeThreshold">4000</parameter-->

     <!--This will give out the timout of the configuration contexts, in milliseconds-->
     <parameter name="ConfigContextTimeoutInterval">30000</parameter>

     <!--During a fault, stack trace can be sent with the fault message. The following flag will control -->
     <!--that behavior.-->
     <parameter name="sendStacktraceDetailsWithFaults">false</parameter>

     <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
     <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
     <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
     <!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
     <parameter name="DrillDownToRootCauseForFaultReason">false</parameter>

     <parameter name="userName">admin</parameter>
     <parameter name="password">axis2</parameter>

     <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
     <!--<parameter name="ServicesDirectory">service</parameter>-->
     <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
     <!--<parameter name="ModulesDirectory">modules</parameter>-->


     <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
     <!--root which can configured using the following contextRoot parameter-->
     <!--<parameter name="contextRoot">axis2</parameter>-->

     <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints-->
     <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
     <!--context path to proper Axis2 servlets-->
     <!--<parameter name="servicePath">services</parameter>-->
     <!--<parameter name="restPath">rest</parameter>-->

     <!--==============================================================-->
     <!--                     Custom Deplyers                           -->
     <!--==============================================================-->
      <!--To have POJO (Service as only one class file , class can be annotated one or not)
      support uncomment the following XML tag-->
     <!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".class" directory="pojo"/>-->
     <!--To have POJO (Service as more than one class , so a jar file) support uncomment the following XML tag-->
     <!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".jar" directory="pojo"/>-->

     <!-- Following parameter will completely disable REST handling in Axis2-->
     <parameter name="disableREST" locked="true">false</parameter>

     <!-- If you have a front end host which exposes this webservice using a different public URL  -->
     <!-- use this parameter to override autodetected url -->
     <!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>-->


     <!--    The way of adding listener to the system-->
     <!--    <listener class="org.apache.axis2.ObserverIMPL">-->
     <!--        <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>-->
     <!--    </listener>-->

     <!-- ================================================= -->
     <!-- Message Receivers -->
     <!-- ================================================= -->
     <!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for -->
     <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
     <!--any operation -->
     <!--Note : You can ovrride this for a particular service by adding the same element with your requirement-->
      <messageReceivers>
         <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
                          class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
         <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
                          class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
         <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
                          class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
         <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
                          class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
     </messageReceivers>

     <!-- ================================================= -->
     <!-- Message Formatter -->
     <!-- ================================================= -->
     <!--Following content type to message formatter mapping can be used to implement support for different message -->
     <!--format  serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
     <messageFormatters>
         <messageFormatter contentType="application/x-www-form-urlencoded"
                          class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
         <messageFormatter contentType="multipart/form-data"
                          class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
         <messageFormatter contentType="application/xml"
                          class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
     </messageFormatters>

     <!-- ================================================= -->
     <!-- Message Builders -->
     <!-- ================================================= -->
     <!--Following content type to builder mapping can be used to implement support for different message -->
     <!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
     <messageBuilders>
         <messageBuilder contentType="application/xml"
                          class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
         <messageBuilder contentType="application/x-www-form-urlencoded"
                          class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
         <messageBuilder contentType="multipart/form-data"
                          class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
     </messageBuilders>

     <!-- ================================================= -->
     <!-- Transport Ins -->
     <!-- ================================================= -->
     <transportReceiver name="http"
                        class="org.apache.axis2.transport.http.SimpleHTTPServer">
         <parameter name="port">8080</parameter>
         <!-- Here is the complete list of supported parameters (see example settings further below):
             port: the port to listen on (default 6060)
             hostname:  if non-null, url prefix used in reply-to endpoint references                                 (default null)
             originServer:  value of http Server header in outgoing messages                                         (default "Simple-Server/1.1")
             requestTimeout:  value in millis of time that requests can wait for data                                (default 20000)
             requestTcpNoDelay:  true to maximize performance and minimize latency                                   (default true)
                                 false to minimize bandwidth consumption by combining segments
             requestCoreThreadPoolSize:  number of threads available for request processing (unless queue fills up)  (default 25)
             requestMaxThreadPoolSize:  number of threads available for request processing if queue fills up         (default 150)
                                        note that default queue never fills up:  see HttpFactory
             threadKeepAliveTime:  time to keep threads in excess of core size alive while inactive                  (default 180)
                                   note that no such threads can exist with default unbounded request queue
             threadKeepAliveTimeUnit:  TimeUnit of value in threadKeepAliveTime (default SECONDS)                    (default SECONDS)
         -->
         <!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> -->
         <!-- <parameter name="originServer">My-Server/1.1</parameter>           -->
         <!-- <parameter name="requestTimeout">10000</parameter>                   -->
         <!-- <parameter name="requestTcpNoDelay">false</parameter>                   -->
         <!-- <parameter name="requestCoreThreadPoolSize">50</parameter>                      -->
         <!-- <parameter name="RequestMaxThreadPoolSize">100</parameter>                     -->
         <!-- <parameter name="threadKeepAliveTime">240000</parameter>                  -->
         <!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter>            -->
     </transportReceiver>

     <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
     <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
         <parameter name="myTopicConnectionFactory">
         	<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
         	<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
         	<parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter>
         </parameter>

         <parameter name="myQueueConnectionFactory">
         	<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
         	<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
         	<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
         </parameter>

         <parameter name="default">
         	<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
         	<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
         	<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
         </parameter>
     </transportReceiver>-->

     <!-- ================================================= -->
     <!-- Mail Transport Listener  -->
     <!-- This is a sample configuration. It assumes a mail server running in localhost.
          Listener pops  messages that comes to the email address red@localhost. Users
          password is red. Listener connect to the server every 3000 milliseconds.
          Parameters with "transport." prefix is Axis2 specific. Others are all from Java Mail API.
          http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
      -->
     <!-- ================================================= -->
     <!--<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.SimpleMailListener">
         <parameter name="mail.pop3.host">localhost</parameter>
         <parameter name="mail.pop3.user">red</parameter>
         <parameter name="mail.store.protocol">pop3</parameter>
         <parameter name="transport.mail.pop3.password">red</parameter>
         <parameter name="transport.mail.replyToAddress">red@localhost</parameter>
         <parameter name="transport.listener.interval">3000</parameter>
     </transportReceiver>-->

 	<!--Uncomment if you want to have TCP transport support-->
     <!--transportReceiver name="tcp"
                        class="org.apache.axis2.transport.tcp.TCPServer">
         <parameter name="port">6060</parameter-->>
         <!--If you want to give your own host address for EPR generation-->
         <!--uncomment the following paramter , and set it as you required.-->
         <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
     <!-- /transportReceiver -->

     <!-- ================================================= -->
     <!-- Transport Outs -->
     <!-- ================================================= -->

     <transportSender name="tcp"
                      class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
     <transportSender name="local"
                      class="org.apache.axis2.transport.local.LocalTransportSender"/>
     <transportSender name="http"
                      class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
         <parameter name="PROTOCOL">HTTP/1.1</parameter>
         <parameter name="Transfer-Encoding">chunked</parameter>

         <!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages -->
         <!--  <parameter name="OmitSOAP12Action">true</parameter>  -->
     </transportSender>

     <transportSender name="https"
                      class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
         <parameter name="PROTOCOL">HTTP/1.1</parameter>
         <parameter name="Transfer-Encoding">chunked</parameter>
     </transportSender>
     <transportSender name="jms"
                      class="org.apache.axis2.transport.jms.JMSSender"/>

     <!-- ================================================= -->
     <!-- Mail Transport Sender  -->
     <!--Only need to uncomment the sender. Configuration is achieved with every client.
         At any instant mail host should be given. Sample configuration has been given.
         http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
         -->
     <!-- ================================================= -->
    <!--<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
         <parameter name="mail.smtp.host">localhost</parameter>
     </transportSender>-->

     <!-- ================================================= -->
     <!-- Global Modules  -->
     <!-- ================================================= -->
     <!-- Comment this to disable Addressing -->
     <module ref="addressing"/>

     <!--Configuring module , providing parameters for modules whether they refer or not-->
     <!--<moduleConfig name="addressing">-->
     <!--<parameter name="addressingPara">N/A</parameter>-->
     <!--</moduleConfig>-->

     <!-- ================================================= -->
     <!-- Clustering  -->
     <!-- ================================================= -->
     <!-- Configure and uncomment following for preparing Axis2 to a clustered environment -->
     <!--
     <cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager">
         <parameter name="param1">value1</parameter>
     	<configurationManager class="org.apache.axis2.cluster.tribes.configuration.TribesConfigurationManager">
     	    <listeners>
     	    </listeners>
     	</configurationManager>
     	<contextManager class="org.apache.axis2.cluster.tribes.context.TribesContextManager">
     	    <listeners>
     	    </listeners>
     	</contextManager>
     </cluster>
     -->

     <!-- ================================================= -->
     <!-- Phases  -->
     <!-- ================================================= -->
     <phaseOrder type="InFlow">
         <!--  System predefined phases       -->
         <phase name="Transport">
             <handler name="RequestURIBasedDispatcher"
                      class="org.apache.axis2.engine.RequestURIBasedDispatcher">
                 <order phase="Transport"/>
             </handler>
             <handler name="SOAPActionBasedDispatcher"
                      class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
                 <order phase="Transport"/>
             </handler>
         </phase>
         <phase name="Security"/>
         <phase name="PreDispatch"/>
         <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
             <handler name="AddressingBasedDispatcher"
                      class="org.apache.axis2.engine.AddressingBasedDispatcher">
                 <order phase="Dispatch"/>
             </handler>
             <handler name="RequestURIOperationDispatcher"
                      class="org.apache.axis2.engine.RequestURIOperationDispatcher">
                 <order phase="Dispatch"/>
             </handler>

             <handler name="SOAPMessageBodyBasedDispatcher"
                      class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
                 <order phase="Dispatch"/>
             </handler>

             <handler name="HTTPLocationBasedDispatcher"
                      class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
                 <order phase="Dispatch"/>
             </handler>

             <handler name="InstanceDispatcher"
                      class="org.apache.axis2.engine.InstanceDispatcher">
                 <order phase="Dispatch"/>
             </handler>
         </phase>
         <!--  System predefined phases       -->
         <!--   After Postdispatch phase module author or service author can add any phase he want      -->
         <phase name="OperationInPhase"/>
 	<phase name="soapmonitorPhase"/>
     </phaseOrder>
     <phaseOrder type="OutFlow">
         <!--      user can add his own phases to this area  -->
 	<phase name="soapmonitorPhase"/>
         <phase name="OperationOutPhase"/>
         <!--system predefined phase-->
         <!--these phase will run irrespective of the service-->
         <phase name="PolicyDetermination"/>
         <phase name="MessageOut"/>
         <phase name="Security"/>
     </phaseOrder>
     <phaseOrder type="InFaultFlow">
         <phase name="PreDispatch"/>
         <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
             <handler name="RequestURIBasedDispatcher"
                      class="org.apache.axis2.engine.RequestURIBasedDispatcher">
                 <order phase="Dispatch"/>
             </handler>

             <handler name="SOAPActionBasedDispatcher"
                      class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
                 <order phase="Dispatch"/>
             </handler>

             <handler name="AddressingBasedDispatcher"
                      class="org.apache.axis2.engine.AddressingBasedDispatcher">
                 <order phase="Dispatch"/>
             </handler>
             <handler name="RequestURIOperationDispatcher"
                      class="org.apache.axis2.engine.RequestURIOperationDispatcher">
                 <order phase="Dispatch"/>
             </handler>

             <handler name="SOAPMessageBodyBasedDispatcher"
                      class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
                 <order phase="Dispatch"/>
             </handler>

             <handler name="HTTPLocationBasedDispatcher"
                      class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
                 <order phase="Dispatch"/>
             </handler>

             <handler name="InstanceDispatcher"
                      class="org.apache.axis2.engine.InstanceDispatcher">
                 <order phase="PostDispatch"/>
             </handler>
         </phase>
         <!--      user can add his own phases to this area  -->
         <phase name="OperationInFaultPhase"/>
 	<phase name="soapmonitorPhase"/>
     </phaseOrder>
     <phaseOrder type="OutFaultFlow">
         <!--      user can add his own phases to this area  -->
 	<phase name="soapmonitorPhase"/>
         <phase name="OperationOutFaultPhase"/>
         <phase name="PolicyDetermination"/>
         <phase name="MessageOut"/>
     </phaseOrder>
 </axisconfig>
	<!--
	/*
	* Copyright 2001-2004 The Apache Software Foundation.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	-->

	<axisconfig name="AxisJava2.0">
	<!-- ================================================= -->
	<!-- Parameters -->
	<!-- ================================================= -->
	<parameter name="hotdeployment">true</parameter>
	<parameter name="hotupdate">false</parameter>
	<parameter name="enableMTOM">false</parameter>
	<parameter name="enableSwA">false</parameter>

	<!--Uncomment if you want to enable file caching for attachments -->
	<!--parameter name="cacheAttachments">true</parameter>
	<parameter name="attachmentDIR"></parameter>
	<parameter name="sizeThreshold">4000</parameter-->

	<!--This will give out the timout of the configuration contexts, in milliseconds-->
	<parameter name="ConfigContextTimeoutInterval">30000</parameter>

	<!--During a fault, stack trace can be sent with the fault message. The following flag will control -->
	<!--that behavior.-->
	<parameter name="sendStacktraceDetailsWithFaults">false</parameter>

	<!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
	<!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
	<!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
	<!--is set, then Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
	<parameter name="DrillDownToRootCauseForFaultReason">false</parameter>

	<parameter name="userName">admin</parameter>
	<parameter name="password">axis2</parameter>

	<!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
	<!--<parameter name="ServicesDirectory">service</parameter>-->
	<!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
	<!--<parameter name="ModulesDirectory">modules</parameter>-->



	<!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
	<!--root which can configured using the following contextRoot parameter-->
	<!--<parameter name="contextRoot">axis2</parameter>-->

	<!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguiush those endpoints-->
	<!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this -->
	<!--context path to proper Axis2 servlets-->
	<!--<parameter name="servicePath">services</parameter>-->
	<!--<parameter name="restPath">rest</parameter>-->

	<!--==============================================================-->
	<!-- Custom Deplyers -->
	<!--==============================================================-->
	<!--To have POJO (Service as only one class file , class can be annotated one or not)
	support uncomment the following XML tag-->
	<!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".class" directory="pojo"/>-->
	<!--To have POJO (Service as more than one class , so a jar file) support uncomment the following XML tag-->
	<!--<deployer class="org.apache.axis2.deployment.POJODeployer" extension=".jar" directory="pojo"/>-->

	<!-- Following parameter will completely disable REST handling in Axis2-->
	<parameter name="disableREST" locked="true">false</parameter>

	<!-- If you have a front end host which exposes this webservice using a different public URL -->
	<!-- use this parameter to override autodetected url -->
	<!--<parameter name="httpFrontendHostUrl">https://someotherhost/context</parameter>-->


	<!-- The way of adding listener to the system-->
	<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
	<!-- <parameter name="RSS_URL">http://127.0.0.1/rss</parameter>-->
	<!-- </listener>-->

	<!-- ================================================= -->
	<!-- Message Receivers -->
	<!-- ================================================= -->
	<!--This is the deafult MessageReceiver for the system , if you want to have MessageReceivers for -->
	<!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
	<!--any operation -->
	<!--Note : You can ovrride this for a particular service by adding the same element with your requirement-->
	<messageReceivers>
	<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
	class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
	<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
	class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
	<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
	class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
	<messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
	class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
	</messageReceivers>

	<!-- ================================================= -->
	<!-- Message Formatter -->
	<!-- ================================================= -->
	<!--Following content type to message formatter mapping can be used to implement support for different message -->
	<!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
	<messageFormatters>
	<messageFormatter contentType="application/x-www-form-urlencoded"
	class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
	<messageFormatter contentType="multipart/form-data"
	class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
	<messageFormatter contentType="application/xml"
	class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
	</messageFormatters>

	<!-- ================================================= -->
	<!-- Message Builders -->
	<!-- ================================================= -->
	<!--Following content type to builder mapping can be used to implement support for different message -->
	<!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
	<messageBuilders>
	<messageBuilder contentType="application/xml"
	class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
	<messageBuilder contentType="application/x-www-form-urlencoded"
	class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
	<messageBuilder contentType="multipart/form-data"
	class="org.apache.axis2.builder.MultipartFormDataBuilder"/>
	</messageBuilders>

	<!-- ================================================= -->
	<!-- Transport Ins -->
	<!-- ================================================= -->
	<transportReceiver name="http"
	class="org.apache.axis2.transport.http.SimpleHTTPServer">
	<parameter name="port">8080</parameter>
	<!-- Here is the complete list of supported parameters (see example settings further below):
	port: the port to listen on (default 6060)
	hostname: if non-null, url prefix used in reply-to endpoint references (default null)
	originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1")
	requestTimeout: value in millis of time that requests can wait for data (default 20000)
	requestTcpNoDelay: true to maximize performance and minimize latency (default true)
	false to minimize bandwidth consumption by combining segments
	requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25)
	requestMaxThreadPoolSize: number of threads available for request processing if queue fills up (default 150)
	note that default queue never fills up: see HttpFactory
	threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180)
	note that no such threads can exist with default unbounded request queue
	threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS)
	-->
	<!-- <parameter name="hostname">http://www.myApp.com/ws</parameter> -->
	<!-- <parameter name="originServer">My-Server/1.1</parameter> -->
	<!-- <parameter name="requestTimeout">10000</parameter> -->
	<!-- <parameter name="requestTcpNoDelay">false</parameter> -->
	<!-- <parameter name="requestCoreThreadPoolSize">50</parameter> -->
	<!-- <parameter name="RequestMaxThreadPoolSize">100</parameter> -->
	<!-- <parameter name="threadKeepAliveTime">240000</parameter> -->
	<!-- <parameter name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> -->
	</transportReceiver>

	<!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ)
	<transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener">
	<parameter name="myTopicConnectionFactory">
	<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
	<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
	<parameter name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter>
	</parameter>

	<parameter name="myQueueConnectionFactory">
	<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
	<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
	<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
	</parameter>

	<parameter name="default">
	<parameter name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter>
	<parameter name="java.naming.provider.url">tcp://localhost:61616</parameter>
	<parameter name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter>
	</parameter>
	</transportReceiver>-->

	<!-- ================================================= -->
	<!-- Mail Transport Listener -->
	<!-- This is a sample configuration. It assumes a mail server running in localhost.
	Listener pops messages that comes to the email address red@localhost. Users
	password is red. Listener connect to the server every 3000 milliseconds.
	Parameters with "transport." prefix is Axis2 specific. Others are all from Java Mail API.
	http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
	-->
	<!-- ================================================= -->
	<!--<transportReceiver name="mailto" class="org.apache.axis2.transport.mail.SimpleMailListener">
	<parameter name="mail.pop3.host">localhost</parameter>
	<parameter name="mail.pop3.user">red</parameter>
	<parameter name="mail.store.protocol">pop3</parameter>
	<parameter name="transport.mail.pop3.password">red</parameter>
	<parameter name="transport.mail.replyToAddress">red@localhost</parameter>
	<parameter name="transport.listener.interval">3000</parameter>
	</transportReceiver>-->

	<!--Uncomment if you want to have TCP transport support-->
	<!--transportReceiver name="tcp"
	class="org.apache.axis2.transport.tcp.TCPServer">
	<parameter name="port">6060</parameter-->>
	<!--If you want to give your own host address for EPR generation-->
	<!--uncomment the following paramter , and set it as you required.-->
	<!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
	<!-- /transportReceiver -->

	<!-- ================================================= -->
	<!-- Transport Outs -->
	<!-- ================================================= -->

	<transportSender name="tcp"
	class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
	<transportSender name="local"
	class="org.apache.axis2.transport.local.LocalTransportSender"/>
	<transportSender name="http"
	class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
	<parameter name="PROTOCOL">HTTP/1.1</parameter>
	<parameter name="Transfer-Encoding">chunked</parameter>

	<!-- If following is set to 'true', optional action part of the Content-Type will not be added to the SOAP 1.2 messages -->
	<!-- <parameter name="OmitSOAP12Action">true</parameter> -->
	</transportSender>

	<transportSender name="https"
	class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
	<parameter name="PROTOCOL">HTTP/1.1</parameter>
	<parameter name="Transfer-Encoding">chunked</parameter>
	</transportSender>
	<transportSender name="jms"
	class="org.apache.axis2.transport.jms.JMSSender"/>

	<!-- ================================================= -->
	<!-- Mail Transport Sender -->
	<!--Only need to uncomment the sender. Configuration is achieved with every client.
	At any instant mail host should be given. Sample configuration has been given.
	http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html
	-->
	<!-- ================================================= -->
	<!--<transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender">
	<parameter name="mail.smtp.host">localhost</parameter>
	</transportSender>-->

	<!-- ================================================= -->
	<!-- Global Modules -->
	<!-- ================================================= -->
	<!-- Comment this to disable Addressing -->
	<module ref="addressing"/>

	<!--Configuring module , providing parameters for modules whether they refer or not-->
	<!--<moduleConfig name="addressing">-->
	<!--<parameter name="addressingPara">N/A</parameter>-->
	<!--</moduleConfig>-->

	<!-- ================================================= -->
	<!-- Clustering -->
	<!-- ================================================= -->
	<!-- Configure and uncomment following for preparing Axis2 to a clustered environment -->
	<!--
	<cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager">
	<parameter name="param1">value1</parameter>
	<configurationManager class="org.apache.axis2.cluster.tribes.configuration.TribesConfigurationManager">
	<listeners>
	</listeners>
	</configurationManager>
	<contextManager class="org.apache.axis2.cluster.tribes.context.TribesContextManager">
	<listeners>
	</listeners>
	</contextManager>
	</cluster>
	-->

	<!-- ================================================= -->
	<!-- Phases -->
	<!-- ================================================= -->
	<phaseOrder type="InFlow">
	<!-- System predefined phases -->
	<phase name="Transport">
	<handler name="RequestURIBasedDispatcher"
	class="org.apache.axis2.engine.RequestURIBasedDispatcher">
	<order phase="Transport"/>
	</handler>
	<handler name="SOAPActionBasedDispatcher"
	class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
	<order phase="Transport"/>
	</handler>
	</phase>
	<phase name="Security"/>
	<phase name="PreDispatch"/>
	<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
	<handler name="AddressingBasedDispatcher"
	class="org.apache.axis2.engine.AddressingBasedDispatcher">
	<order phase="Dispatch"/>
	</handler>
	<handler name="RequestURIOperationDispatcher"
	class="org.apache.axis2.engine.RequestURIOperationDispatcher">
	<order phase="Dispatch"/>
	</handler>

	<handler name="SOAPMessageBodyBasedDispatcher"
	class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
	<order phase="Dispatch"/>
	</handler>

	<handler name="HTTPLocationBasedDispatcher"
	class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
	<order phase="Dispatch"/>
	</handler>

	<handler name="InstanceDispatcher"
	class="org.apache.axis2.engine.InstanceDispatcher">
	<order phase="Dispatch"/>
	</handler>
	</phase>
	<!-- System predefined phases -->
	<!-- After Postdispatch phase module author or service author can add any phase he want -->
	<phase name="OperationInPhase"/>
	<phase name="soapmonitorPhase"/>
	</phaseOrder>
	<phaseOrder type="OutFlow">
	<!-- user can add his own phases to this area -->
	<phase name="soapmonitorPhase"/>
	<phase name="OperationOutPhase"/>
	<!--system predefined phase-->
	<!--these phase will run irrespective of the service-->
	<phase name="PolicyDetermination"/>
	<phase name="MessageOut"/>
	<phase name="Security"/>
	</phaseOrder>
	<phaseOrder type="InFaultFlow">
	<phase name="PreDispatch"/>
	<phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
	<handler name="RequestURIBasedDispatcher"
	class="org.apache.axis2.engine.RequestURIBasedDispatcher">
	<order phase="Dispatch"/>
	</handler>

	<handler name="SOAPActionBasedDispatcher"
	class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
	<order phase="Dispatch"/>
	</handler>

	<handler name="AddressingBasedDispatcher"
	class="org.apache.axis2.engine.AddressingBasedDispatcher">
	<order phase="Dispatch"/>
	</handler>
	<handler name="RequestURIOperationDispatcher"
	class="org.apache.axis2.engine.RequestURIOperationDispatcher">
	<order phase="Dispatch"/>
	</handler>

	<handler name="SOAPMessageBodyBasedDispatcher"
	class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
	<order phase="Dispatch"/>
	</handler>

	<handler name="HTTPLocationBasedDispatcher"
	class="org.apache.axis2.engine.HTTPLocationBasedDispatcher">
	<order phase="Dispatch"/>
	</handler>

	<handler name="InstanceDispatcher"
	class="org.apache.axis2.engine.InstanceDispatcher">
	<order phase="PostDispatch"/>
	</handler>
	</phase>
	<!-- user can add his own phases to this area -->
	<phase name="OperationInFaultPhase"/>
	<phase name="soapmonitorPhase"/>
	</phaseOrder>
	<phaseOrder type="OutFaultFlow">
	<!-- user can add his own phases to this area -->
	<phase name="soapmonitorPhase"/>
	<phase name="OperationOutFaultPhase"/>
	<phase name="PolicyDetermination"/>
	<phase name="MessageOut"/>
	</phaseOrder>
	</axisconfig>