| /* |
| * Copyright 2004,2005 The Apache Software Foundation. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License") |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef SANDESHA2_ERROR_H |
| #define SANDESHA2_ERROR_H |
| |
| #include <axutil_error.h> |
| |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| /** |
| * @defgroup sandesha2_error |
| * @ingroup Sandesha2 Error |
| * @{ |
| */ |
| /** |
| * \brief Sandesha2 error codes |
| * |
| * Set of error codes for Sandesha2 |
| */ |
| typedef enum sandesha2_error_codes sandesha2_error_codes_t; |
| enum sandesha2_error_codes |
| { |
| /* No error */ |
| SANDESHA2_ERROR_NONE = SANDESHA2_ERROR_CODES_START, |
| /* A namespace that is not supported by Sandesha2 */ |
| SANDESHA2_ERROR_UNSUPPORTED_NS, |
| /* Object cannot generated since the om_element corresponding to |
| * that is NULL */ |
| SANDESHA2_ERROR_NULL_OM_ELEMENT, |
| /* The om element has no child elements or attributes */ |
| SANDESHA2_ERROR_EMPTY_OM_ELEMENT, |
| /* om_element cannot be generated since the element corresponding |
| * to that is NULL*/ |
| SANDESHA2_ERROR_TO_OM_NULL_ELEMENT, |
| /* Required OM attribute is NULL */ |
| SANDESHA2_ERROR_NULL_OM_ATTRIBUTE, |
| /* An invalid number found during object to om conversion*/ |
| SANDESHA2_ERROR_TO_OM_INVALID_NUMBER, |
| /* Ack Final now allowed in the spec */ |
| SANDESHA2_ERROR_ACK_FINAL_NOT_ALLOWED, |
| /* 'To' address is not set */ |
| SANDESHA2_ERROR_TO_ADDRESS_NOT_SET, |
| /* Service Context is NULL */ |
| SANDESHA2_ERROR_SVC_CTX_NULL, |
| /* Service is NULL */ |
| SANDESHA2_ERROR_SVC_NULL, |
| /* Result is not unique */ |
| SANDESHA2_ERROR_NON_UNIQUE_RESULT, |
| /* Key is NULL. Cannot insert */ |
| SANDESHA2_ERROR_KEY_IS_NULL, |
| /* Ack None now allowed in the spec */ |
| SANDESHA2_ERROR_ACK_NONE_NOT_ALLOWED, |
| /* unknown storage mgr */ |
| SANDESHA2_ERROR_UNKNOWN_STORAGE_MGR, |
| /* Sandesha configuration is not set in axis2 conf*/ |
| SANDESHA2_ERROR_CONFIGURATION_NOT_SET, |
| /* NULL msg context */ |
| SANDESHA2_ERROR_NULL_MSG_CTX, |
| /* Error occured while sending fault */ |
| SANDESHA2_ERROR_SENDING_FAULT, |
| /* Invalid message number specified */ |
| SANDESHA2_ERROR_INVALID_MSG_NUM, |
| /* Specified seq does not exist */ |
| SANDESHA2_ERROR_SEQ_NOT_EXIST, |
| /* RM Spec version is invalid */ |
| SANDESHA2_ERROR_INVALID_SPEC_VERSION, |
| /* Error occured while sending ack */ |
| SANDESHA2_ERROR_SENDING_ACK, |
| /* NULL to epr is specified */ |
| SANDESHA2_ERROR_NULL_TO, |
| /* Required msg part missing */ |
| SANDESHA2_ERROR_REQD_MSG_PART_MISSING, |
| /* NULL sequnce given for processing */ |
| SANDESHA2_ERROR_NULL_SEQ, |
| /* Storage Map not present */ |
| SANDESHA2_ERROR_STORAGE_MAP_NOT_PRESENT, |
| /* Entry is not present for updating */ |
| SANDESHA2_ERROR_ENTRY_IS_NOT_PRESENT_FOR_UPDATING, |
| /* Invalid namespace uri */ |
| SANDESHA2_ERROR_INVALID_NS_URI, |
| /* An incoming seq report is not present for the given seqID */ |
| SANDESHA2_ERROR_INCOMING_SEQ_REPORT_NOT_PRESENT_FOR_GIVEN_SEQ_ID, |
| /* To EPR is not set */ |
| SANDESHA2_ERROR_TO_EPR_NOT_SET, |
| /* Options object is not set */ |
| SANDESHA2_ERROR_OPTIONS_OBJECT_NOT_SET, |
| /* Unknown specification error message */ |
| SANDESHA2_ERROR_UNKNOWN_SPEC_ERROR_MESSAGE, |
| /* Could not send the terminate message */ |
| SANDESHA2_ERROR_COULD_NOT_SEND_TERMINATE_MESSAGE, |
| /* This rm spec version does not define a sequence close action */ |
| SANDESHA2_ERROR_RM_SPEC_VERSION_DOES_NOT_DEFINE_A_SEQ_CLOSE_ACTION, |
| /* Could not send the close sequence message */ |
| SANDESHA2_ERROR_COULD_NOT_SEND_THE_CLOSE_SEQ_MESSAGE, |
| /* Close Sequence feature is only available for WSRM 1.1 */ |
| SANDESHA2_ERROR_CLOSE_SEQ_FEATURE_ONLY_AVAILABLE_FOR_WSRM1_1, |
| /* Cannnot find a seq report for the given data */ |
| SANDESHA2_ERROR_CANNOT_FIND_SEQ_REPORT_FOR_GIVEN_DATA, |
| /* Cannnot find a seq report for the given sequence id */ |
| SANDESHA2_ERROR_CANNOT_FIND_SEQ_REPORT_FOR_GIVEN_SEQ_ID, |
| /* Sequence is not in a active state. Either create seq response has not |
| * being received or seq has been terminated, cannot get seqID |
| */ |
| SANDESHA2_ERROR_SEQ_NOT_IN_ACTIVE_STATE, |
| /* Sequence id bean is not set */ |
| SANDESHA2_ERROR_SEQ_ID_BEAN_NOT_SET, |
| /* Empty AckRequest messages can only be sent with the v1_1 spec */ |
| SANDESHA2_ERROR_EMPTY_ACK_REQUEST_MESSAGE, |
| /* Cannot generate the sequence report for the given internalSequenceID */ |
| SANDESHA2_ERROR_CANNOT_GENERATE_SEQ_REPORT_FOR_GIVEN_INTERNAL_SEQ_ID, |
| /* Canot send the ackRequest message since it is not active */ |
| SANDESHA2_ERROR_CANNOT_SEND_ACK_REQUEST_MESSAGE_SINCE_IS_NOT_ACTIVE, |
| /* This spec version does not define a ackRequest action */ |
| SANDESHA2_ERROR_SPEC_VERSION_DOES_NOT_DEFINE_A_ACK_REQUEST_ACTION, |
| /* This spec version does not define a ackRequest soap action */ |
| SANDESHA2_ERROR_SPEC_VERSION_DOES_NOT_DEFINE_A_ACK_REQUEST_SOAP_ACTION, |
| /* Invalid endpoint reference */ |
| SANDESHA2_ERROR_INVALID_EPR, |
| /* Cannot find the sequence id */ |
| SANDESHA2_ERROR_CANNOT_FIND_SEQ_ID, |
| /* This RM version does not allow sequence closing */ |
| SANDESHA2_ERROR_RM_VERSION_DOES_NOT_ALLOW_SEQ_CLOSING, |
| /* "Not a valid terminated sequence. Internal sequence Bean is not |
| * available for the given sequence |
| */ |
| NOT_A_VALID_TERMINATED_SEQ, |
| /* "Not a valid timedout sequence. Internal sequence Bean is not |
| * available for the given sequence |
| */ |
| NOT_A_VALID_TIMEDOUT_SEQ, |
| /* Completed messages bean is null, for the sequence */ |
| SANDESHA2_ERROR_COMPLETED_MSGS_BEAN_IS_NULL, |
| /* Sequence id is not recoreded */ |
| SANDESHA2_ERROR_UNRECORDED_SEQ_ID, |
| /* relates_to not found or invalid*/ |
| SANDESHA2_ERROR_INVALID_RELATES_TO, |
| /* To is NULL */ |
| SANDESHA2_ERROR_TO_IS_NULL, |
| /* Create Sequence Part is NULL */ |
| SANDESHA2_ERROR_CREATE_SEQ_PART_IS_NULL, |
| /* AcksTo is NULL */ |
| SANDESHA2_ERROR_ACKS_TO_IS_NULL, |
| /* Create sequence message does not have the WSA:Action value */ |
| SANDESHA2_ERROR_CREATE_SEQ_MSG_DOES_NOT_HAVE_WSA_ACTION_VALUE, |
| /* Create sequence message does not has a valid RM namespace value. |
| * Can't decide the RM version |
| */ |
| SANDESHA2_ERROR_CREATE_SEQ_MSG_DOES_NOT_HAVE_VALID_RM_NS_VALUE, |
| |
| /* Application message is NULL */ |
| SANDESHA2_ERROR_APPLICATION_MSG_NULL, |
| /* Configuration Context is NULL */ |
| SANDESHA2_ERROR_CONF_CTX_NULL, |
| /* Cannot find the rmVersion of the given message */ |
| SANDESHA2_ERROR_CANNOT_FIND_RM_VERSION_OF_GIVEN_MSG, |
| /* Given message has rmNamespace value, which is different from the |
| * reqistered namespace for the sequence |
| */ |
| SANDESHA2_ERROR_RM_NS_VALUE_IS_DIFFERENT_FROM_REGISTERED_NS_FOR_SEQ, |
| /* Cannot initialize the message */ |
| SANDESHA2_ERROR_CANNOT_INIT_MSG, |
| /* Error in processing the message */ |
| SANDESHA2_ERROR_CANNOT_PROCESS_MSG, |
| /* String array is invalid */ |
| SANDESHA2_ERROR_INVALID_STRING_ARRAY, |
| /** The following has to be the last error value all the time. |
| All other error codes should appear above this. |
| SANDESHA_ERROR_LAST is used to track the number of error codes present |
| for the purpose of sizing the error message array. |
| */ |
| /* MessagePending header must have an attribute named 'pending'" */ |
| SANDESHA2_ERROR_PENDING_HEADER_MUST_HAVE_ATTRIBUTE_PENDING, |
| /* Attribute 'pending' must have value 'true' or 'false' */ |
| SANDESHA2_ERROR_ATTRIBUTE_PENDING_MUST_HAVE_VALUE_TRUE_OR_FALSE, |
| /* MakeConnection element should have at lease one of Address and Identifier subelements */ |
| SANDESHA2_ERROR_MAKE_CONNECTION_ELEMENT_SHOULD_HAVE_AT_LEAST_ADDRESS_OR_IDENTIFIER, |
| /* Invalid MakeConnection object. Both Identifier and Address are null */ |
| SANDESHA2_ERROR_INVALID_MAKE_CONNECTION_BOTH_IDENTIFER_AND_ADDRESS_NULL, |
| /* MakeConnection is not supported in this RM version */ |
| SANDESHA2_ERROR_MAKE_CONNECTION_IS_NOT_SUPPORTED_IN_THIS_RM_VERSION, |
| /* Invalid MakeConnection message. Either Address or Identifier must be present */ |
| SANDESHA2_ERROR_INVALID_MAKE_CONNECTION_MSG, |
| /* Database cannot be opened */ |
| SANDESHA2_ERROR_CANNOT_OPEN_DATABASE, |
| /* There is an sql error. Please refer logs */ |
| SANDESHA2_ERROR_SQL_ERROR, |
| /* Cannot build message context since service is not present */ |
| SANDESHA2_ERROR_CANNOT_BUILD_MSG_CTX_WHEN_SVC_NOT_PRESENT, |
| /* Cannot find a operation for generated message */ |
| SANDESHA2_ERROR_CANNOT_FIND_OP_FOR_GENERATED_MSG, |
| /* Invalid persistence property string */ |
| SANDESHA2_ERROR_INVALID_PERSISTENCE_PROPERTY_STRING, |
| SANDESHA2_ERROR_LAST |
| }; |
| |
| axis2_status_t AXIS2_CALL |
| sandesha2_error_init(); |
| |
| /** @} */ |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /*SANDESHA2_ERROR_H*/ |