| /* |
| * Copyright 2004,2005 The Apache Software Foundation. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef AXIS2_DEP_ENGINE_H |
| #define AXIS2_DEP_ENGINE_H |
| |
| /** |
| * @defgroup axis2_dep_engine Deployment Engine |
| * @ingroup axis2_deployment |
| * @{ |
| */ |
| |
| /** |
| * @file axis2_dep_engine.h |
| * @brief Axis2 Deployment Engine interface |
| */ |
| |
| #include <axis2_const.h> |
| #include <axis2_error.h> |
| #include <axis2_defines.h> |
| #include <axis2_env.h> |
| #include <axis2_allocator.h> |
| #include "axis2_arch_file_data.h" |
| #include "axis2_ws_info.h" |
| #include "axis2_conf_builder.h" |
| #include "axis2_repos_listener.h" |
| |
| |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| struct axis2_arch_file_data; |
| struct axis2_arch_reader; |
| struct axis2_ws_info; |
| struct axis2_phases_info; |
| struct axis2_svc; |
| |
| /** Type name for struct axis2_dep_engine */ |
| typedef struct axis2_dep_engine axis2_dep_engine_t; |
| /** Type name for struct axis2_dep_engine_ops */ |
| typedef struct axis2_dep_engine_ops axis2_dep_engine_ops_t; |
| |
| /** |
| * Deployment Engine ops struct |
| * Encapsulator struct for ops of axis2_dep_engine |
| */ |
| struct axis2_dep_engine_ops |
| { |
| /** |
| * De-allocate memory |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| free)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| |
| /** |
| * while parsing the axis2.xml the module refferences have to be stored some |
| * where , since at that time none of module availble (they load after parsing |
| * the document) |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param module_qname <code>QName</code> |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| add_module)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| axis2_qname_t *module_qname); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param module_name pointer to module name |
| */ |
| struct axis2_module_desc *(AXIS2_CALL * |
| get_module)( |
| const axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| axis2_qname_t *module_name); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| */ |
| struct axis2_arch_file_data *(AXIS2_CALL * |
| get_current_file_item)( |
| const axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param file pointer to file |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| add_ws_to_deploy)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| struct axis2_arch_file_data *file); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param file pointer to file |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| add_ws_to_undeploy)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| struct axis2_ws_info *file); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| */ |
| struct axis2_phases_info *(AXIS2_CALL * |
| get_phases_info)( |
| const axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @return AxisConfiguration <code>AxisConfiguration</code> |
| */ |
| struct axis2_conf *(AXIS2_CALL * |
| get_axis_conf)( |
| const axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| */ |
| struct axis2_conf *(AXIS2_CALL * |
| load)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| */ |
| struct axis2_conf *(AXIS2_CALL * |
| load_client)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| const axis2_char_t *client_home); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param dll_name pointer to dll_name |
| */ |
| void *(AXIS2_CALL * |
| get_handler_dll)( |
| const axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| axis2_char_t *dll_name); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| do_deploy)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| undeploy)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| */ |
| axis2_bool_t (AXIS2_CALL * |
| is_hot_update)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param phases_info pointer to phases info |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| set_phases_info)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| struct axis2_phases_info *phases_info); |
| |
| /** |
| * This method is used to fill a axisservice object using services.xml , first it should create |
| * an axisservice object using WSDL and then fill that using given servic.xml and load all the requed |
| * class and build the chains , finally add the servicecontext to EngineContext and axisservice into |
| * EngineConfiguration |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param svc pointer to service |
| * @param file_name pointer to file name |
| */ |
| struct axis2_svc *(AXIS2_CALL * |
| build_svc)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| struct axis2_svc *svc, |
| axis2_char_t *file_name); |
| |
| /** |
| * This method can be used to build ModuleDescription for a given module archiev file |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param module_archive pointer to module archive |
| * @param conf pointer to conf |
| */ |
| struct axis2_module_desc *(AXIS2_CALL * |
| build_module)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| axis2_file_t *module_archive, |
| struct axis2_conf *conf); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| */ |
| axis2_char_t *(AXIS2_CALL * |
| get_repos_path)( |
| const axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param file_data pointer to file data |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| set_current_file_item)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| struct axis2_arch_file_data *file_data); |
| |
| /** |
| * @param dep_engine pointer to deployment engine |
| * @param env pointer to environment struct |
| * @param arch_reader pointer to arch reader |
| * @return AXIS2_SUCCESS on success, else AXIS2_FAILURE |
| */ |
| axis2_status_t (AXIS2_CALL * |
| set_arch_reader)( |
| axis2_dep_engine_t *dep_engine, |
| const axis2_env_t *env, |
| struct axis2_arch_reader *arch_reader); |
| }; |
| |
| /** |
| * Deployment Engine struct |
| */ |
| struct axis2_dep_engine |
| { |
| /** Operations of deployment engine */ |
| axis2_dep_engine_ops_t *ops; |
| }; |
| |
| /** |
| * No param constructor is need to deploye module and service programatically |
| * @param env pointer to environment struct |
| * @return pointer to newly created deployment engine |
| */ |
| AXIS2_EXTERN axis2_dep_engine_t *AXIS2_CALL |
| axis2_dep_engine_create( |
| const axis2_env_t *env); |
| |
| /** |
| * Creates description builder struct |
| * This the constructor which is used by Engine in order to start |
| * Deployment module, |
| * @param env pointer to environment struct |
| * @param repos_path is the path to which Repositary Listner should listen. |
| * @return pointer to newly created deployment engine |
| */ |
| AXIS2_EXTERN axis2_dep_engine_t *AXIS2_CALL |
| axis2_dep_engine_create_with_repos_name( |
| const axis2_env_t *env, |
| const axis2_char_t *repos_path); |
| |
| /** |
| * Creates deployment engine struct |
| * @param env pointer to environment struct |
| * @param repos_path is the path to which Repositary Listner should listen. |
| * @param svr_xml_file pointer to service xml file |
| * @return pointer to newly created deployment engine |
| */ |
| AXIS2_EXTERN axis2_dep_engine_t *AXIS2_CALL |
| axis2_dep_engine_create_with_repos_name_and_svr_xml_file( |
| const axis2_env_t *env, |
| const axis2_char_t *repos_path, |
| const axis2_char_t *svr_xml_file); |
| |
| /*************************** Function macros **********************************/ |
| |
| /** Frees the deployment engine. |
| @sa axis2_dep_engine_ops#free */ |
| #define AXIS2_DEP_ENGINE_FREE(dep_engine, env) \ |
| ((dep_engine)->ops->free (dep_engine, env)) |
| |
| /** Adds the module. |
| @sa axis2_dep_engine_ops#add_module */ |
| #define AXIS2_DEP_ENGINE_ADD_MODULE(dep_engine, env, module_qname) \ |
| ((dep_engine)->ops->add_module (dep_engine, env, module_qname)) |
| |
| /** Get module. |
| @sa axis2_dep_engine_ops#get_module */ |
| #define AXIS2_DEP_ENGINE_GET_MODULE(dep_engine, env, module_qname) \ |
| ((dep_engine)->ops->get_module (dep_engine, env, module_qname)) |
| |
| /** Gets the current file item. |
| @sa axis2_dep_engine_ops#get_current_file_item */ |
| #define AXIS2_DEP_ENGINE_GET_CURRENT_FILE_ITEM(dep_engine, env) \ |
| ((dep_engine)->ops->get_current_file_item (dep_engine, env)) |
| |
| /** Adds web service to deploy. |
| @sa axis2_dep_engine_ops#add_ws_to_deploy */ |
| #define AXIS2_DEP_ENGINE_ADD_WS_TO_DEPLOY(dep_engine, env, file) \ |
| ((dep_engine)->ops->add_ws_to_deploy (dep_engine, env, file)) |
| |
| /** Adds web service to undelploy |
| @sa axis2_dep_engine_ops#add_ws_to_undeploy */ |
| #define AXIS2_DEP_ENGINE_ADD_WS_TO_UNDEPLOY(dep_engine, env, file) \ |
| ((dep_engine)->ops->add_ws_to_undeploy (dep_engine, env, file)) |
| |
| /** Do deploy. |
| @sa axis2_dep_engine_ops#do_deploy */ |
| #define AXIS2_DEP_ENGINE_DO_DEPLOY(dep_engine, env) \ |
| ((dep_engine)->ops->do_deploy (dep_engine, env)) |
| |
| /** Undeploy. |
| @sa axis2_dep_engine_ops#undeploy */ |
| #define AXIS2_DEP_ENGINE_UNDEPLOY(dep_engine, env) \ |
| ((dep_engine)->ops->undeploy (dep_engine, env)) |
| |
| /** Gets the phases infomation.. |
| @sa axis2_dep_engine_ops#get_phases_info */ |
| #define AXIS2_DEP_ENGINE_GET_PHASES_INFO(dep_engine, env) \ |
| ((dep_engine)->ops->get_phases_info (dep_engine, env)) |
| |
| /** Gets the axis2 configuration. |
| @sa axis2_dep_engine_ops#get_axis2_conf */ |
| #define AXIS2_DEP_ENGINE_GET_AXIS2_CONF(dep_engine, env) \ |
| ((dep_engine)->ops->get_axis_conf (dep_engine, env)) |
| |
| /** Load. |
| @sa axis2_dep_engine_ops#load */ |
| #define AXIS2_DEP_ENGINE_LOAD(dep_engine, env) \ |
| ((dep_engine)->ops->load (dep_engine, env)) |
| |
| /** Loads the client. |
| @sa axis2_dep_engine_ops#load_client */ |
| #define AXIS2_DEP_ENGINE_LOAD_CLIENT(dep_engine, env, client_home) \ |
| ((dep_engine)->ops->load_client (dep_engine, env, client_home)) |
| |
| /** Gets the handler dll. |
| @sa axis2_dep_engine_ops#get_handler_dll */ |
| #define AXIS2_DEP_ENGINE_GET_HANDLER_DLL(dep_engine, env, dll_name) \ |
| ((dep_engine)->ops->get_handler_dll (dep_engine, env, dll_name)) |
| |
| /** Is hot update. |
| @sa axis2_dep_engine_ops#is_hot_update */ |
| #define AXIS2_DEP_ENGINE_IS_HOT_UPDATE(dep_engine, env) \ |
| ((dep_engine)->ops->is_hot_update (dep_engine, env)) |
| |
| /** Sets phases info. |
| @sa axis2_dep_engine_ops#set_phases_info */ |
| #define AXIS2_DEP_ENGINE_SET_PHASES_INFO(dep_engine, env, phases_info) \ |
| ((dep_engine)->ops->set_phases_info (dep_engine, env, phases_info)) |
| |
| /** Build the service. |
| @sa axis2_dep_engine_ops#build_svc */ |
| #define AXIS2_DEP_ENGINE_BUILD_SVC(dep_engine, env, svc, file_name) \ |
| ((dep_engine)->ops->build_svc (dep_engine, env, svc, file_name)) |
| |
| /** Builds the module. |
| @sa axis2_dep_engine_ops#build_module */ |
| #define AXIS2_DEP_ENGINE_BUILD_MODULE(dep_engine, env, module_archive, conf) \ |
| ((dep_engine)->ops->build_module (dep_engine, env, module_archive, conf)) |
| |
| /** Gets the repos path. |
| @sa axis2_dep_engine_ops#get_repos_path */ |
| #define AXIS2_DEP_ENGINE_GET_REPOS_PATH(dep_engine, env) \ |
| ((dep_engine)->ops->get_repos_path (dep_engine, env)) |
| |
| /** Sets the current file item. |
| @sa axis2_dep_engine_ops#set_current_file_item */ |
| #define AXIS2_DEP_ENGINE_SET_CURRENT_FILE_ITEM(dep_engine, env, file_data) \ |
| ((dep_engine)->ops->set_current_file_item (dep_engine, env, file_data)) |
| |
| /** Sets the arch reader. |
| @sa axis2_dep_engine_ops#set_arch_reader */ |
| #define AXIS2_DEP_ENGINE_SET_ARCH_READER(dep_engine, env, arch_reader) \ |
| ((dep_engine)->ops->set_arch_reader (dep_engine, env, arch_reader)) |
| |
| /*************************** End of function macros ***************************/ |
| |
| /** @} */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| #endif /* AXIS2_DEP_ENGINE_H */ |