| |
| /* |
| * Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdlib.h> |
| #include "axutil_error_default.h" |
| |
| AXIS2_EXPORT const axis2_char_t *axutil_error_messages[AXIS2_ERROR_LAST + |
| 10000]; |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_init( |
| ) |
| { |
| int i = 0; |
| for (i = 0; i < AXIS2_ERROR_LAST; i++) |
| { |
| axutil_error_messages[i] = "Unknown Error :("; |
| } |
| |
| /* Common Errors */ |
| axutil_error_messages[AXIS2_ERROR_NONE] = "No Error"; |
| axutil_error_messages[AXIS2_ERROR_NO_MEMORY] = "Out of memory"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_NULL_PARAM] = |
| "NULL paramater was passed when a non NULL parameter was expected"; |
| /* core:addr */ |
| |
| /* core:clientapi */ |
| axutil_error_messages[AXIS2_ERROR_BLOCKING_INVOCATION_EXPECTS_RESPONSE] = |
| "Blocking invocation expects response"; |
| axutil_error_messages[AXIS2_ERROR_CANNOT_INFER_TRANSPORT] = |
| "cannot infer transport from URL"; |
| axutil_error_messages[AXIS2_ERROR_CLIENT_SIDE_SUPPORT_ONLY_ONE_CONF_CTX] = |
| "Client side support only one configuration context"; |
| axutil_error_messages[AXIS2_ERROR_MEP_CANNOT_BE_NULL_IN_MEP_CLIENT] = |
| "MEP cannot be NULL in MEP client"; |
| axutil_error_messages[AXIS2_ERROR_MEP_MISMATCH_IN_MEP_CLIENT] = |
| "MEP Mismatch"; |
| axutil_error_messages[AXIS2_ERROR_TWO_WAY_CHANNEL_NEEDS_ADDRESSING] = |
| "Two way channel needs addressing module to be engaged"; |
| axutil_error_messages[AXIS2_ERROR_UNKNOWN_TRANSPORT] = "Unknown Transport"; |
| axutil_error_messages[AXIS2_ERROR_UNSUPPORTED_TYPE] = |
| "type is not supported"; |
| axutil_error_messages[AXIS2_ERROR_OPTIONS_OBJECT_IS_NOT_SET] = |
| "Options object is not set"; |
| /* core:clientapi:diclient */ |
| |
| /* core:context */ |
| axutil_error_messages[AXIS2_ERROR_INVALID_SOAP_ENVELOPE_STATE] = |
| "Invalid SOAP envelope state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_MSG_CTX] = |
| "Invalid message context state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_SVC] = |
| "Service accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_SVC_GRP] = |
| "Service group accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_SERVICE_NOT_YET_FOUND] = |
| "Service not yet found"; |
| /* core:deployment */ |
| axutil_error_messages[AXI2_ERROR_INVALID_PHASE] = |
| "Invalid phase found in phase validation*"; |
| axutil_error_messages[AXIS2_ERROR_CONFIG_NOT_FOUND] = |
| "axis2.xml cannot be found"; |
| axutil_error_messages[AXIS2_ERROR_DATA_ELEMENT_IS_NULL] = |
| "Data element of the OM Node is null"; |
| axutil_error_messages[AXIS2_ERROR_IN_FLOW_NOT_ALLOWED_IN_TRS_OUT] = |
| "In transport sender, Inflow is not allowed"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_HANDLER_STATE] = |
| "Invalid handler state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODUELE_REF] = |
| "Invalid Module Ref encountered"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODUELE_REF_BY_OP] = |
| "Invalid Module Reference by Operation"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODULE_CONF] = |
| "Invalid Module Configuration"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_DESC_BUILDER] = |
| "Description Builder is found to be in invalid state"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_NOT_FOUND] = "Module Not Found"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_VALIDATION_FAILED] = |
| "Module Validation Failed"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_XML_NOT_FOUND_FOR_THE_MODULE] = |
| "Module xml file is not found in the given path"; |
| axutil_error_messages[AXIS2_ERROR_NO_DISPATCHER_FOUND] = |
| "No dispatcher found"; |
| axutil_error_messages[AXIS2_ERROR_OP_NAME_MISSING] = |
| "Operation name is missing"; |
| axutil_error_messages[AXIS2_ERROR_OUT_FLOW_NOT_ALLOWED_IN_TRS_IN] = |
| "In transport Receiver, Outflow is not allowed"; |
| axutil_error_messages[AXIS2_ERROR_REPO_CAN_NOT_BE_NULL] = |
| "Repository name cannot be NULL"; |
| axutil_error_messages[AXIS2_ERROR_REPOSITORY_NOT_EXIST] = |
| "Repository in path does not exist"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_LISTENER_INIT_FAILED] = |
| "Repository Listener initialization failed"; |
| axutil_error_messages[AXIS2_ERROR_SERVICE_XML_NOT_FOUND] = |
| "Service xml file is not found in the given path"; |
| axutil_error_messages[AXIS2_ERROR_SVC_NAME_ERROR] = "Service Name Error"; |
| axutil_error_messages[AXIS2_ERROR_TRANSPORT_SENDER_ERROR] = |
| "Transport Sender Error"; |
| axutil_error_messages[AXIS2_PATH_TO_CONFIG_CAN_NOT_BE_NULL] = |
| "Path to Config can not be NULL"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_SVC] = "Invalid Service"; |
| /* core:description */ |
| axutil_error_messages[AXIS2_ERROR_CANNOT_CORRELATE_MSG] = |
| "Cannot correlate message"; |
| axutil_error_messages[AXIS2_ERROR_COULD_NOT_MAP_MEP_URI_TO_MEP_CONSTANT] = |
| "Could not Map the MEP URI to a axis MEP constant value"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MESSAGE_ADDITION] = |
| "Invalid messge addition operation context completed"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_MODULE_DESC] = |
| "Module description accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_PARAM_CONTAINER] = |
| "Parameter container not set"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_ALREADY_ENGAGED_TO_OP] = |
| "module has alredy engaged to the op op terminated !!!"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_ALREADY_ENGAGED_TO_SVC] = |
| "module has alredy been engaged on the service.Operation terminated !!!"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_ALREADY_ENGAGED_TO_SVC_GRP] = |
| "module has alredy been engaged on the service. Group Operation terminated !!!"; |
| axutil_error_messages[AXIS2_ERROR_PARAMETER_LOCKED_CANNOT_OVERRIDE] = |
| "Parameter locked, Cannot override"; |
| axutil_error_messages[AXIS2_ERROR_EMPTY_SCHEMA_LIST] = |
| "schema list is empty or NULL in svc "; |
| /* core:engine */ |
| axutil_error_messages[AXIS2_ERROR_BEFORE_AFTER_HANDLERS_SAME] = |
| "Both before and after handlers cannot be the same"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_HANDLER_RULES] = |
| "Invalid handler rules"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODULE] = "Invalid Module"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_PHASE_FIRST_HANDLER] = |
| "Invalid first handler for phase"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_PHASE_LAST_HANDLER] = |
| "Invalid last handler for phase"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_CONF] = |
| "Invalid engine config state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_PROCESSING_FAULT_ALREADY] = |
| "Message context processing a fault already"; |
| axutil_error_messages[AXIS2_ERROR_NOWHERE_TO_SEND_FAULT] = |
| "fault to field not specified in message context"; |
| axutil_error_messages[AXIS2_ERROR_PHASE_ADD_HANDLER_INVALID] = |
| "Only one handler allowed for phase, adding another handler is not allowed"; |
| axutil_error_messages[AXIS2_ERROR_PHASE_FIRST_HANDLER_ALREADY_SET] = |
| "First handler of phase already set"; |
| axutil_error_messages[AXIS2_ERROR_PHASE_LAST_HANDLER_ALREADY_SET] = |
| "Last handler of phase already set"; |
| axutil_error_messages[AXIS2_ERROR_TWO_SVCS_CANNOT_HAVE_SAME_NAME] = |
| "Two service can not have same name, a service with same name alredy"; |
| /* core:phaseresolver */ |
| axutil_error_messages[AXIS2_ERROR_INVALID_MODULE_REF] = |
| "Invalid Module Ref"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_PHASE] = "Invalid Phase"; |
| axutil_error_messages[AXIS2_ERROR_NO_TRANSPORT_IN_CONFIGURED] = |
| "There are no in transport chains configured"; |
| axutil_error_messages[AXIS2_ERROR_NO_TRANSPORT_OUT_CONFIGURED] = |
| "There are no out transport chains configured"; |
| axutil_error_messages[AXIS2_ERROR_PHASE_IS_NOT_SPECIFED] = |
| "Phase is not specified"; |
| axutil_error_messages[AXIS2_ERROR_SERVICE_MODULE_CAN_NOT_REFER_GLOBAL_PHASE] |
| = "Service module can not refer global phase"; |
| /* core:wsdl */ |
| axutil_error_messages[AXIS2_ERROR_WSDL_SCHEMA_IS_NULL] = "Schema is NULL"; |
| /* core:receivers */ |
| axutil_error_messages[AXIS2_ERROR_OM_ELEMENT_INVALID_STATE] = |
| "Om Element has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_OM_ELEMENT_MISMATCH] = |
| "Om Elements do not match"; |
| axutil_error_messages[AXIS2_ERROR_RPC_NEED_MATCHING_CHILD] = |
| "RPC style soap body don't have a child element"; |
| axutil_error_messages[AXIS2_ERROR_UNKNOWN_STYLE] = |
| "Operation Description has unknown operation style"; |
| axutil_error_messages[AXIS2_ERROR_STRING_DOES_NOT_REPRESENT_A_VALID_NC_NAME] |
| = "String does not represent a valid NCName"; |
| /* core:transport */ |
| |
| /* core:transport:http */ |
| axutil_error_messages[AXIS2_ERROR_HTTP_CLIENT_TRANSPORT_ERROR] = |
| "Error occured in transport"; |
| axutil_error_messages[AXIS2_ERROR_HTTP_REQUEST_NOT_SENT] = |
| "A read attempt(HTTP) for the reply without sending the request"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_HEADER] = |
| "Invalid string passed as a http header"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_HTTP_HEADER_START_LINE] = |
| "Invalid status line or invalid request line"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_TRANSPORT_PROTOCOL] = |
| "Transport protocol is unsupported by axis2"; |
| axutil_error_messages[AXIS2_ERROR_NULL_BODY] = |
| "No body present in the request or the response"; |
| axutil_error_messages[AXIS2_ERROR_NULL_CONFIGURATION_CONTEXT] = |
| "A valid conf_ctx is reqd for the http worker"; |
| axutil_error_messages[AXIS2_ERROR_NULL_HTTP_VERSION] = |
| "HTTP version cannot be null in the status/request line"; |
| axutil_error_messages[AXIS2_ERROR_NULL_IN_STREAM_IN_MSG_CTX] = |
| "Input stream is NULL in msg_ctx"; |
| axutil_error_messages[AXIS2_ERROR_NULL_OM_OUTPUT] = "OM output is NULL"; |
| axutil_error_messages[AXIS2_ERROR_NULL_SOAP_ENVELOPE_IN_MSG_CTX] = |
| "Null soap envelope in msg_ctx"; |
| axutil_error_messages[AXIS2_ERROR_NULL_STREAM_IN_CHUNKED_STREAM] = |
| "NULL stream in the http chunked stream"; |
| axutil_error_messages[AXIS2_ERROR_NULL_STREAM_IN_RESPONSE_BODY] = |
| "We got a NULL stream in the response body"; |
| axutil_error_messages[AXIS2_ERROR_NULL_URL] = "URL NULL in http client"; |
| axutil_error_messages[AXIS2_ERROR_OUT_TRNSPORT_INFO_NULL] = |
| "We need transport_info in msg_ctx"; |
| axutil_error_messages[AXIS2_ERROR_RESPONSE_CONTENT_TYPE_MISSING] = |
| "Content-Type header missing in HTTP response"; |
| axutil_error_messages[AXIS2_ERROR_RESPONSE_TIMED_OUT] = |
| "Response timed out"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_ENVELOPE_OR_SOAP_BODY_NULL] = |
| "SOAP envelope or SOAP body NULL"; |
| axutil_error_messages[AXIS2_ERROR_SSL_ENGINE] = |
| "Error occured in SSL engine"; |
| axutil_error_messages[AXIS2_ERROR_SSL_NO_CA_FILE] = |
| "Either axis2c cannot find certificates or the env variable is not set"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_RESPONSE] = |
| "Error in writing the response in response writer"; |
| axutil_error_messages[AXIS2_ERROR_REQD_PARAM_MISSING] = |
| "Required parameter is missing in url encoded request"; |
| axutil_error_messages[AXIS2_ERROR_UNSUPPORTED_SCHEMA_TYPE] = |
| " Unsuppoted schema type in REST"; |
| axutil_error_messages[AXIS2_ERROR_SVC_OR_OP_NOT_FOUND] = |
| "Service or operation not found"; |
| /* mod_addr */ |
| |
| /* platforms */ |
| |
| /* utils */ |
| axutil_error_messages[AXIS2_ERROR_COULD_NOT_OPEN_FILE] = |
| "Could not open the file"; |
| axutil_error_messages[AXIS2_ERROR_DLL_CREATE_FAILED] = |
| "Failed in creating DLL"; |
| axutil_error_messages[AXIS2_ERROR_DLL_LOADING_FAILED] = |
| "DLL loading failed"; |
| axutil_error_messages[AXIS2_ERROR_ENVIRONMENT_IS_NULL] = |
| "Environment passed is null"; |
| axutil_error_messages[AXIS2_ERROR_FILE_NAME_NOT_SET] = |
| "Axis2 File does not have a file name"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_DLL_DESC] = |
| "dll description has invalid state of not having valid dll create function, \ |
| of valid delete function or valid dll_handler"; |
| axutil_error_messages[AXIS2_ERROR_HANDLER_CREATION_FAILED] = |
| "Failed in creating Handler"; |
| axutil_error_messages[AXIS2_ERROR_INDEX_OUT_OF_BOUNDS] = |
| "Array list index out of bounds"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_ADDRESS] = |
| "Invalid IP or hostname"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_FD] = |
| "Trying to do operation on invalid file descriptor"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_SOCKET] = |
| "Trying to do operation on closed/not opened socket"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_PARAM] = |
| "Parameter not set"; |
| axutil_error_messages[AXIS2_ERROR_MODULE_CREATION_FAILED] = |
| "Module create failed"; |
| axutil_error_messages[AXIS2_ERROR_MSG_RECV_CREATION_FAILED] = |
| "Failed in creating Message Receiver"; |
| axutil_error_messages[AXIS2_ERROR_NO_SUCH_ELEMENT] = "No such element"; |
| axutil_error_messages[AXIS2_ERROR_SOCKET_BIND_FAILED] = |
| "Socket bind failed. Another process may be already using this port"; |
| axutil_error_messages[AXIS2_ERROR_SOCKET_ERROR] = |
| "Error creating a socket. Most probably error returned by OS"; |
| axutil_error_messages[AXIS2_ERROR_SOCKET_LISTEN_FAILED] = |
| "Listen failed for the server socket"; |
| axutil_error_messages[AXIS2_ERROR_SVC_SKELETON_CREATION_FAILED] = |
| "Failed in creating Service Skeleton"; |
| axutil_error_messages[AXIS2_ERROR_TRANSPORT_RECV_CREATION_FAILED] = |
| "Failed in creating Transport Receiver"; |
| axutil_error_messages[AXIS2_ERROR_TRANSPORT_SENDER_CREATION_FAILED] = |
| "Failed in creating Transport Sender"; |
| axutil_error_messages[AXIS2_ERROR_UUID_GEN_FAILED] = |
| "Generation of platform dependent uuid failed"; |
| axutil_error_messages[AXIS2_ERROR_POSSIBLE_DEADLOCK] = "Possible deadlock"; |
| /* wsdl */ |
| axutil_error_messages |
| [AXIS2_ERROR_INTERFACE_OR_PORT_TYPE_NOT_FOUND_FOR_THE_BINDING] = |
| "Interface or Port Type not found for the binding"; |
| axutil_error_messages |
| [AXIS2_ERROR_INTERFACES_OR_PORTS_NOT_FOUND_FOR_PARTIALLY_BUILT_WOM] = |
| "Interfaces or Ports not found for the partially built WOM"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_WSDL_OP] = |
| "Wsdl op accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_STATE_WSDL_SVC] = |
| "Wsdl Service accessed has invalid state"; |
| axutil_error_messages[AXIS2_ERROR_MEP_CANNOT_DETERMINE_MEP] = |
| "Cannot determine MEP"; |
| axutil_error_messages[AXIS2_ERROR_WSDL_BINDING_NAME_IS_REQUIRED] = |
| "Wsdl binding name is cannot be NULL(Is required)"; |
| axutil_error_messages[AXIS2_ERROR_WSDL_INTERFACE_NAME_IS_REQUIRED] = |
| " PortType/Interface name cannot be null(Required)"; |
| axutil_error_messages[AXIS2_ERROR_WSDL_PARSER_INVALID_STATE] = |
| "Wsdl parsing has resulted in an invalid state"; |
| axutil_error_messages[AXIS2_ERROR_WSDL_SVC_NAME_IS_REQUIRED] = |
| " Wsdl svc name cannot be null(Required)"; |
| /* xml */ |
| |
| /* xml:attachments */ |
| |
| /* xml:om */ |
| axutil_error_messages[AXIS2_ERROR_BUILDER_DONE_CANNOT_PULL] = |
| "Builder done with pulling. Cannot pull any more"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_BUILDER_STATE_CANNOT_DISCARD] = |
| "Discard faile because the builder state is invalid"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_BUILDER_STATE_LAST_NODE_NULL] = |
| "Bulder's last node is NULL when it is not supposed to be NULL"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_DOCUMENT_STATE_ROOT_NULL] = |
| "Document root is NULL] = when it is not supposed to be NULL"; |
| axutil_error_messages |
| [AXIS2_ERROR_INVALID_DOCUMENT_STATE_UNDEFINED_NAMESPACE] = |
| "Undefined namespace used"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_EMPTY_NAMESPACE_URI] = |
| "Error a namespace should have a valid uri"; |
| axutil_error_messages |
| [AXIS2_ERROR_ITERATOR_NEXT_METHOD_HAS_NOT_YET_BEEN_CALLED] = |
| "next method has not been called so cannot remove" |
| "an element before calling next valid for any om iterator"; |
| axutil_error_messages[AXIS2_ERROR_ITERATOR_REMOVE_HAS_ALREADY_BEING_CALLED] |
| = "Document root is NULL, when it is not supposed to be NULL"; |
| axutil_error_messages[AXIS2_ERROR_XML_READER_ELEMENT_NULL] = |
| "axiom_xml_reader returned NULL element"; |
| axutil_error_messages[AXIS2_ERROR_XML_READER_VALUE_NULL] = |
| "axiom_xml_reader returned NULL value"; |
| /* xml:parser */ |
| axutil_error_messages[AXIS2_ERROR_CREATING_XML_STREAM_READER] = |
| "error occured creating xml stream reader"; |
| axutil_error_messages[AXIS2_ERROR_CREATING_XML_STREAM_WRITER] = |
| "error occured creating xml stream writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_ATTRIBUTE] = |
| "error in writing attribute"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_ATTRIBUTE_WITH_NAMESPACE] = |
| "error in writing attribute with namespace"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_ATTRIBUTE_WITH_NAMESPACE_PREFIX] = |
| "error in writing attribute with namespace prefix"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_COMMENT] = |
| "error in writing comment"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_DATA_SOURCE] = |
| "error in writing data source"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_DEFAULT_NAMESPACE] = |
| "error in writing default namespace"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_DTD] = "error in writing dtd"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_EMPTY_ELEMENT] = |
| "error occured in writing empty element"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_EMPTY_ELEMENT_WITH_NAMESPACE] = |
| "error occured in writing empty element with namespace"; |
| axutil_error_messages |
| [AXIS2_ERROR_WRITING_EMPTY_ELEMENT_WITH_NAMESPACE_PREFIX] = |
| "error in writing empty element with namespace prefix"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_END_DOCUMENT] = |
| "error occured in writing end document in xml writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_END_ELEMENT] = |
| "error occured in writing end element in xml writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_PROCESSING_INSTRUCTION] = |
| "error in writing processing instruction"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_START_DOCUMENT] = |
| "error occured in writing start element in start document in xml writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_START_ELEMENT] = |
| "error occured in writing start element in xml writer"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_START_ELEMENT_WITH_NAMESPACE] = |
| "error occured in writing start element with namespace in xml writer"; |
| axutil_error_messages |
| [AXIS2_ERROR_WRITING_START_ELEMENT_WITH_NAMESPACE_PREFIX] = |
| "error occured in writing start element with namespace prefix"; |
| axutil_error_messages[AXIS2_ERROR_WRITING_CDATA] = |
| "error in writing cdata section"; |
| axutil_error_messages[AXIS2_ERROR_XML_PARSER_INVALID_MEM_TYPE] = |
| "AXIS2_XML_PARSER_TYPE_BUFFER or AXIS2_XML_PARSER_TYPE_DOC is expected"; |
| |
| /* invalid type passed */ |
| axutil_error_messages[AXIS2_ERROR_INVALID_BASE_TYPE] = |
| "invalid type passed"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_SOAP_NAMESPACE_URI] = |
| "invalid soap namespace uri found"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_SOAP_VERSION] = |
| "Invalid SOAP version"; |
| axutil_error_messages[AXIS2_ERROR_INVALID_VALUE_FOUND_IN_MUST_UNDERSTAND] = |
| "invalid value found in must understand"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_CODE_ELEMENTS_ENCOUNTERED] = |
| "multiple fault code elements encountered in soap fault"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_DETAIL_ELEMENTS_ENCOUNTERED] = |
| "multiple fault detail elements encountered in soap fault"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_NODE_ELEMENTS_ENCOUNTERED] = |
| "multiple fault node elements encountered in soap fault"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_REASON_ELEMENTS_ENCOUNTERED] = |
| "multiple fault reason elements encountered in soap fault"; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_ROLE_ELEMENTS_ENCOUNTERED] = |
| "multiple fault role elements encountered in soap fault "; |
| axutil_error_messages[AXIS2_ERROR_MULTIPLE_SUB_CODE_VALUES_ENCOUNTERED] = |
| "multiple fault subcode value elements encountered"; |
| axutil_error_messages |
| [AXIS2_ERROR_MULTIPLE_VALUE_ENCOUNTERED_IN_CODE_ELEMENT] = |
| "multiple fault value elements encounterd"; |
| axutil_error_messages[AXIS2_ERROR_MUST_UNDERSTAND_SHOULD_BE_1_0_TRUE_FALSE] |
| = "must understatnd attribute should have values of true or false"; |
| axutil_error_messages[AXIS2_ERROR_OM_ELEMENT_EXPECTED] = |
| "om element is expected"; |
| axutil_error_messages[AXIS2_ERROR_ONLY_CHARACTERS_ARE_ALLOWED_HERE] = |
| "processing soap11 fault value element should have only" |
| "text as its children"; |
| axutil_error_messages[AXIS2_ERROR_ONLY_ONE_SOAP_FAULT_ALLOWED_IN_BODY] = |
| "only one SOAP fault allowed in SOAP body"; |
| axutil_error_messages |
| [AXIS2_ERROR_SOAP11_FAULT_ACTOR_SHOULD_NOT_HAVE_CHILD_ELEMENTS] = |
| "AXIS2_ERROR_SOAP11_FAULT_ACTOR_SHOULD_NOT_HAVE_CHILD_ELEMENTS"; |
| axutil_error_messages |
| [AXIS2_ERROR_SOAP_BUILDER_ENVELOPE_CAN_HAVE_ONLY_HEADER_AND_BODY] = |
| "soap builder found a child element other than header or body in envelope" |
| "element"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_BUILDER_HEADER_BODY_WRONG_ORDER] = |
| "soap builder encounterd body element first and header next"; |
| axutil_error_messages |
| [AXIS2_ERROR_SOAP_BUILDER_MULTIPLE_BODY_ELEMENTS_ENCOUNTERED] = |
| "soap builder multiple body elements encounterd"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_BUILDER_MULTIPLE_HEADERS_ENCOUNTERED] |
| = "soap builder encountered multiple headers"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_FAULT_CODE_DOES_NOT_HAVE_A_VALUE] = |
| "AXIS2_ERROR_SOAP_FAULT_CODE_DOES_NOT_HAVE_A_VALUE"; |
| axutil_error_messages |
| [AXIS2_ERROR_SOAP_FAULT_REASON_ELEMENT_SHOULD_HAVE_A_TEXT] = |
| "AXIS2_ERROR_SOAP_FAULT_REASON_ELEMENT_SHOULD_HAVE_A_TEXT"; |
| axutil_error_messages |
| [AXIS2_ERROR_SOAP_FAULT_ROLE_ELEMENT_SHOULD_HAVE_A_TEXT] = |
| "soap fault role element should have a text value"; |
| axutil_error_messages |
| [AXIS2_ERROR_SOAP_FAULT_VALUE_SHOULD_BE_PRESENT_BEFORE_SUB_CODE] = |
| "soap fault value should be present before subcode element in soap fault code"; |
| axutil_error_messages[AXIS2_ERROR_SOAP_MESSAGE_DOES_NOT_CONTAIN_AN_ENVELOPE] |
| = "soap message does not contain a soap envelope element"; |
| axutil_error_messages |
| [AXIS2_ERROR_SOAP_MESSAGE_FIRST_ELEMENT_MUST_CONTAIN_LOCAL_NAME] = |
| "soap messgae first element should have a localname"; |
| axutil_error_messages |
| [AXIS2_ERROR_THIS_LOCALNAME_IS_NOT_SUPPORTED_INSIDE_THE_REASON_ELEMENT] |
| = "localname not supported inside a reason element"; |
| axutil_error_messages |
| [AXIS2_ERROR_THIS_LOCALNAME_IS_NOT_SUPPORTED_INSIDE_THE_SUB_CODE_ELEMENT] |
| = "localname not supported inside the subcode element"; |
| axutil_error_messages |
| [AXIS2_ERROR_THIS_LOCALNAME_NOT_SUPPORTED_INSIDE_THE_CODE_ELEMENT] = |
| "localname not supported inside the code element"; |
| axutil_error_messages |
| [AXIS2_ERROR_TRANSPORT_LEVEL_INFORMATION_DOES_NOT_MATCH_WITH_SOAP] = |
| "transport identified soap version does not match with soap message version "; |
| axutil_error_messages[AXIS2_ERROR_UNSUPPORTED_ELEMENT_IN_SOAP_FAULT_ELEMENT] |
| = "unsupported element found in soap fault element"; |
| axutil_error_messages[AXIS2_ERROR_WRONG_ELEMENT_ORDER_ENCOUNTERED] = |
| "wrong element order encountered "; |
| /* services */ |
| axutil_error_messages[AXIS2_ERROR_SVC_SKEL_INVALID_XML_FORMAT_IN_REQUEST] = |
| "Invalid XML format in request"; |
| axutil_error_messages[AXIS2_ERROR_SVC_SKEL_INPUT_OM_NODE_NULL] = |
| "Input OM node NULL, Probably error in SOAP request"; |
| axutil_error_messages |
| [AXIS2_ERROR_SVC_SKEL_INVALID_OPERATION_PARAMETERS_IN_SOAP_REQUEST] = |
| "Invalid parameters for service operation in SOAP request"; |
| |
| axutil_error_messages[AXIS2_ERROR_WSDL_SCHEMA_IS_NULL] = "Schema is NULL"; |
| |
| /* repos */ |
| axutil_error_messages[AXIS2_ERROR_REPOS_NOT_AUTHENTICATED] = |
| "NOT_AUTHENTICATED"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_UNSUPPORTED_MODE] = |
| "UNSUPPORTED_MODE"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_EXPIRED] = "EXPIRED"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_NOT_IMPLEMENTED] = |
| "NOT_IMPLEMENTED"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_NOT_FOUND] = "NOT_FOUND"; |
| axutil_error_messages[AXIS2_ERROR_REPOS_BAD_SEARCH_TEXT] = |
| "BAD_SEARCH_TEXT"; |
| |
| /* neethi */ |
| axutil_error_messages[AXIS2_ERROR_NEETHI_ELEMENT_WITH_NO_NAMESPACE] = |
| "Element With No Namespace"; |
| axutil_error_messages |
| [AXIS2_ERROR_NEETHI_POLICY_CREATION_FAILED_FROM_ELEMENT] = |
| "Policy Creation failed from element"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_ALL_CREATION_FAILED_FROM_ELEMENT] = |
| "All creation failed from element"; |
| axutil_error_messages |
| [AXIS2_ERROR_NEETHI_EXACTLYONE_CREATION_FAILED_FROM_ELEMENT] = |
| "Exactlyone creation failed from element"; |
| axutil_error_messages |
| [AXIS2_ERROR_NEETHI_REFERENCE_CREATION_FAILED_FROM_ELEMENT] = |
| "Reference creation failed from element"; |
| axutil_error_messages |
| [AXIS2_ERROR_NEETHI_ASSERTION_CREATION_FAILED_FROM_ELEMENT] = |
| "Assertion creation failed from element"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_ALL_CREATION_FAILED] = |
| "All Creation failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_EXACTLYONE_CREATION_FAILED] = |
| "Exactlyone Creation failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_POLICY_CREATION_FAILED] = |
| "Policy Creation failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_NORMALIZATION_FAILED] = |
| "Normalization failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_WRONG_INPUT_FOR_MERGE] = |
| "Wrong Input for merge"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_CROSS_PRODUCT_FAILED] = |
| "Cross Product failed"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_NO_CHILDREN_POLICY_COMPONENTS] = |
| "No Children Policy components"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_URI_NOT_SPECIFIED] = |
| "Reference Uri not specified"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_NO_ENTRY_FOR_THE_GIVEN_URI] = |
| "No entry for the given Uri"; |
| axutil_error_messages |
| [AXIS2_ERROR_NEETHI_EXACTLYONE_NOT_FOUND_IN_NORMALIZED_POLICY] = |
| "Exactlyone not found in normalized_policy"; |
| axutil_error_messages[AXIS2_ERROR_NEETHI_EXACTLYONE_IS_EMPTY] = |
| "Exactlyone is Empty"; |
| axutil_error_messages |
| [AXIS2_ERROR_NEETHI_ALL_NOT_FOUND_WHILE_GETTING_CROSS_PRODUCT] = |
| "All not found while getting cross product"; |
| |
| return AXIS2_SUCCESS; |
| } |
| |
| AXIS2_EXTERN void AXIS2_CALL |
| axutil_error_free( |
| axutil_error_t * error) |
| { |
| if (error) |
| { |
| AXIS2_FREE(error->allocator, error); |
| } |
| return; |
| } |
| |
| AXIS2_EXTERN axutil_error_t *AXIS2_CALL |
| axutil_error_create( |
| axutil_allocator_t * allocator) |
| { |
| axutil_error_t *error; |
| if (!allocator) |
| return NULL; |
| |
| error = (axutil_error_t *) AXIS2_MALLOC(allocator, sizeof(axutil_error_t)); |
| |
| if (!error) |
| return NULL; |
| |
| error->allocator = allocator; |
| |
| error->message = NULL; |
| |
| return error; |
| } |
| |
| AXIS2_EXTERN const axis2_char_t *AXIS2_CALL |
| axutil_error_get_message( |
| const axutil_error_t * error) |
| { |
| const axis2_char_t *message = NULL; |
| if (error) |
| { |
| if (error->error_number > AXIS2_ERROR_NONE && |
| error->error_number < AXIS2_ERROR_LAST) |
| message = axutil_error_messages[error->error_number]; |
| else |
| { |
| if (error->message) |
| message = error->message; |
| else if (error->error_number == AXIS2_ERROR_NONE) |
| message = axutil_error_messages[AXIS2_ERROR_NONE]; |
| else |
| message = |
| "Undefined error returned by business logic implementation"; |
| } |
| } |
| |
| return message; |
| } |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_set_error_number( |
| axutil_error_t * error, |
| axutil_error_codes_t error_number) |
| { |
| error->error_number = error_number; |
| return AXIS2_SUCCESS; |
| } |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_set_status_code( |
| axutil_error_t * error, |
| axis2_status_codes_t status_code) |
| { |
| error->status_code = status_code; |
| return AXIS2_SUCCESS; |
| } |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_get_status_code( |
| axutil_error_t * error) |
| { |
| return error->status_code; |
| } |
| |
| AXIS2_EXTERN axis2_status_t AXIS2_CALL |
| axutil_error_set_error_message( |
| axutil_error_t * error, |
| axis2_char_t * message) |
| { |
| if (message) |
| error->message = message; |
| return AXIS2_SUCCESS; |
| } |
