| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| |
| # Common path suffixes to be searched by find_library or find_path. |
| # Windows artifacts may be found under "<root>/Library", so |
| # search there as well. |
| set(ADBC_LIBRARY_PATH_SUFFIXES |
| "${CMAKE_LIBRARY_ARCHITECTURE}" |
| "lib/${CMAKE_LIBRARY_ARCHITECTURE}" |
| "lib64" |
| "lib32" |
| "lib" |
| "bin" |
| "Library" |
| "Library/lib" |
| "Library/bin") |
| set(ADBC_INCLUDE_PATH_SUFFIXES "include" "Library" "Library/include") |
| |
| include(CMakePackageConfigHelpers) |
| |
| function(add_thirdparty_lib LIB_NAME LIB_TYPE LIB) |
| set(options) |
| set(one_value_args) |
| set(multi_value_args DEPS INCLUDE_DIRECTORIES) |
| cmake_parse_arguments(ARG |
| "${options}" |
| "${one_value_args}" |
| "${multi_value_args}" |
| ${ARGN}) |
| if(ARG_UNPARSED_ARGUMENTS) |
| message(SEND_ERROR "Error: unrecognized arguments: ${ARG_UNPARSED_ARGUMENTS}") |
| endif() |
| |
| add_library(${LIB_NAME} ${LIB_TYPE} IMPORTED) |
| if(${LIB_TYPE} STREQUAL "STATIC") |
| set_target_properties(${LIB_NAME} PROPERTIES IMPORTED_LOCATION "${LIB}") |
| message(STATUS "Added static library dependency ${LIB_NAME}: ${LIB}") |
| else() |
| if(WIN32) |
| # Mark the ".lib" location as part of a Windows DLL |
| set_target_properties(${LIB_NAME} PROPERTIES IMPORTED_IMPLIB "${LIB}") |
| else() |
| set_target_properties(${LIB_NAME} PROPERTIES IMPORTED_LOCATION "${LIB}") |
| endif() |
| message(STATUS "Added shared library dependency ${LIB_NAME}: ${LIB}") |
| endif() |
| if(ARG_DEPS) |
| set_target_properties(${LIB_NAME} PROPERTIES INTERFACE_LINK_LIBRARIES "${ARG_DEPS}") |
| endif() |
| if(ARG_INCLUDE_DIRECTORIES) |
| set_target_properties(${LIB_NAME} PROPERTIES INTERFACE_INCLUDE_DIRECTORIES |
| "${ARG_INCLUDE_DIRECTORIES}") |
| endif() |
| endfunction() |
| |
| function(REUSE_PRECOMPILED_HEADER_LIB TARGET_NAME LIB_NAME) |
| if(ADBC_USE_PRECOMPILED_HEADERS) |
| target_precompile_headers(${TARGET_NAME} REUSE_FROM ${LIB_NAME}) |
| endif() |
| endfunction() |
| |
| function(arrow_install_cmake_package PACKAGE_NAME EXPORT_NAME) |
| set(CONFIG_CMAKE "${PACKAGE_NAME}Config.cmake") |
| set(BUILT_CONFIG_CMAKE "${CMAKE_CURRENT_BINARY_DIR}/${CONFIG_CMAKE}") |
| configure_package_config_file("${CONFIG_CMAKE}.in" "${BUILT_CONFIG_CMAKE}" |
| INSTALL_DESTINATION "${ARROW_CMAKE_DIR}/${PACKAGE_NAME}") |
| set(CONFIG_VERSION_CMAKE "${PACKAGE_NAME}ConfigVersion.cmake") |
| set(BUILT_CONFIG_VERSION_CMAKE "${CMAKE_CURRENT_BINARY_DIR}/${CONFIG_VERSION_CMAKE}") |
| write_basic_package_version_file("${BUILT_CONFIG_VERSION_CMAKE}" |
| COMPATIBILITY SameMajorVersion) |
| set(INSTALL_CMAKEDIR "${CMAKE_INSTALL_LIBDIR}/cmake/${PACKAGE_NAME}") |
| install(FILES "${BUILT_CONFIG_CMAKE}" "${BUILT_CONFIG_VERSION_CMAKE}" |
| DESTINATION "${INSTALL_CMAKEDIR}") |
| if(EXPORT_NAME) |
| set(TARGETS_CMAKE "${PACKAGE_NAME}Targets.cmake") |
| install(EXPORT ${EXPORT_NAME} |
| DESTINATION "${INSTALL_CMAKEDIR}" |
| NAMESPACE "${PACKAGE_NAME}::" |
| FILE "${TARGETS_CMAKE}") |
| endif() |
| endfunction() |
| |
| # \arg OUTPUTS list to append built targets to |
| function(ADD_ARROW_LIB LIB_NAME) |
| set(options) |
| set(one_value_args |
| BUILD_SHARED |
| BUILD_STATIC |
| CMAKE_PACKAGE_NAME |
| PKG_CONFIG_NAME |
| SHARED_LINK_FLAGS |
| PRECOMPILED_HEADER_LIB) |
| set(multi_value_args |
| SOURCES |
| PRECOMPILED_HEADERS |
| OUTPUTS |
| STATIC_LINK_LIBS |
| SHARED_LINK_LIBS |
| SHARED_PRIVATE_LINK_LIBS |
| EXTRA_INCLUDES |
| PRIVATE_INCLUDES |
| DEPENDENCIES |
| SHARED_INSTALL_INTERFACE_LIBS |
| STATIC_INSTALL_INTERFACE_LIBS |
| OUTPUT_PATH) |
| cmake_parse_arguments(ARG |
| "${options}" |
| "${one_value_args}" |
| "${multi_value_args}" |
| ${ARGN}) |
| if(ARG_UNPARSED_ARGUMENTS) |
| message(SEND_ERROR "Error: unrecognized arguments: ${ARG_UNPARSED_ARGUMENTS}") |
| endif() |
| |
| if(ARG_OUTPUTS) |
| set(${ARG_OUTPUTS}) |
| endif() |
| |
| # Allow overriding ADBC_BUILD_SHARED and ADBC_BUILD_STATIC |
| if(DEFINED ARG_BUILD_SHARED) |
| set(BUILD_SHARED ${ARG_BUILD_SHARED}) |
| else() |
| set(BUILD_SHARED ${ADBC_BUILD_SHARED}) |
| endif() |
| if(DEFINED ARG_BUILD_STATIC) |
| set(BUILD_STATIC ${ARG_BUILD_STATIC}) |
| else() |
| set(BUILD_STATIC ${ADBC_BUILD_STATIC}) |
| endif() |
| if(ARG_OUTPUT_PATH) |
| set(OUTPUT_PATH ${ARG_OUTPUT_PATH}) |
| else() |
| set(OUTPUT_PATH ${BUILD_OUTPUT_ROOT_DIRECTORY}) |
| endif() |
| |
| if(WIN32 |
| OR (CMAKE_GENERATOR STREQUAL Xcode) |
| OR CMAKE_VERSION VERSION_LESS 3.12) |
| # We need to compile C++ separately for each library kind (shared and static) |
| # because of dllexport declarations on Windows. |
| # The Xcode generator doesn't reliably work with Xcode as target names are not |
| # guessed correctly. |
| # We can't use target for object library with CMake 3.11 or earlier. |
| # See also: Object Libraries: |
| # https://cmake.org/cmake/help/latest/command/add_library.html#object-libraries |
| set(USE_OBJLIB OFF) |
| else() |
| set(USE_OBJLIB ON) |
| endif() |
| |
| if(USE_OBJLIB) |
| # Generate a single "objlib" from all C++ modules and link |
| # that "objlib" into each library kind, to avoid compiling twice |
| add_library(${LIB_NAME}_objlib OBJECT ${ARG_SOURCES}) |
| # Necessary to make static linking into other shared libraries work properly |
| set_property(TARGET ${LIB_NAME}_objlib PROPERTY POSITION_INDEPENDENT_CODE 1) |
| set_property(TARGET ${LIB_NAME}_objlib PROPERTY CXX_STANDARD_REQUIRED ON) |
| if(ARG_DEPENDENCIES) |
| add_dependencies(${LIB_NAME}_objlib ${ARG_DEPENDENCIES}) |
| endif() |
| if(ARG_PRECOMPILED_HEADER_LIB) |
| reuse_precompiled_header_lib(${LIB_NAME}_objlib ${ARG_PRECOMPILED_HEADER_LIB}) |
| endif() |
| if(ARG_PRECOMPILED_HEADERS AND ADBC_USE_PRECOMPILED_HEADERS) |
| target_precompile_headers(${LIB_NAME}_objlib PRIVATE ${ARG_PRECOMPILED_HEADERS}) |
| endif() |
| set(LIB_DEPS $<TARGET_OBJECTS:${LIB_NAME}_objlib>) |
| set(LIB_INCLUDES) |
| set(EXTRA_DEPS) |
| |
| if(ARG_OUTPUTS) |
| list(APPEND ${ARG_OUTPUTS} ${LIB_NAME}_objlib) |
| endif() |
| |
| if(ARG_EXTRA_INCLUDES) |
| target_include_directories(${LIB_NAME}_objlib SYSTEM PUBLIC ${ARG_EXTRA_INCLUDES}) |
| endif() |
| if(ARG_PRIVATE_INCLUDES) |
| target_include_directories(${LIB_NAME}_objlib PRIVATE ${ARG_PRIVATE_INCLUDES}) |
| endif() |
| target_link_libraries(${LIB_NAME}_objlib |
| PRIVATE ${ARG_SHARED_LINK_LIBS} ${ARG_SHARED_PRIVATE_LINK_LIBS} |
| ${ARG_STATIC_LINK_LIBS}) |
| adbc_configure_target(${LIB_NAME}_objlib) |
| # https://github.com/apache/arrow-adbc/issues/81 |
| target_compile_features(${LIB_NAME}_objlib PRIVATE cxx_std_11) |
| else() |
| # Prepare arguments for separate compilation of static and shared libs below |
| # TODO: add PCH directives |
| set(LIB_DEPS ${ARG_SOURCES}) |
| set(EXTRA_DEPS ${ARG_DEPENDENCIES}) |
| |
| if(ARG_EXTRA_INCLUDES) |
| set(LIB_INCLUDES ${ARG_EXTRA_INCLUDES}) |
| endif() |
| endif() |
| |
| set(RUNTIME_INSTALL_DIR bin) |
| |
| if(BUILD_SHARED) |
| add_library(${LIB_NAME}_shared SHARED ${LIB_DEPS}) |
| target_compile_features(${LIB_NAME}_shared PRIVATE cxx_std_11) |
| set_property(TARGET ${LIB_NAME}_shared PROPERTY CXX_STANDARD_REQUIRED ON) |
| adbc_configure_target(${LIB_NAME}_shared) |
| if(EXTRA_DEPS) |
| add_dependencies(${LIB_NAME}_shared ${EXTRA_DEPS}) |
| endif() |
| |
| if(ARG_PRECOMPILED_HEADER_LIB) |
| reuse_precompiled_header_lib(${LIB_NAME}_shared ${ARG_PRECOMPILED_HEADER_LIB}) |
| endif() |
| |
| if(ARG_OUTPUTS) |
| list(APPEND ${ARG_OUTPUTS} ${LIB_NAME}_shared) |
| endif() |
| |
| if(LIB_INCLUDES) |
| target_include_directories(${LIB_NAME}_shared SYSTEM PUBLIC ${ARG_EXTRA_INCLUDES}) |
| endif() |
| |
| if(ARG_PRIVATE_INCLUDES) |
| target_include_directories(${LIB_NAME}_shared PRIVATE ${ARG_PRIVATE_INCLUDES}) |
| endif() |
| |
| # On iOS, specifying -undefined conflicts with enabling bitcode |
| if(APPLE |
| AND NOT IOS |
| AND NOT DEFINED ENV{EMSCRIPTEN}) |
| # On OS X, you can avoid linking at library load time and instead |
| # expecting that the symbols have been loaded separately. This happens |
| # with libpython* where there can be conflicts between system Python and |
| # the Python from a thirdparty distribution |
| # |
| # When running with the Emscripten Compiler, we need not worry about |
| # python, and the Emscripten Compiler does not support this option. |
| set(ARG_SHARED_LINK_FLAGS "-undefined dynamic_lookup ${ARG_SHARED_LINK_FLAGS}") |
| endif() |
| |
| set_target_properties(${LIB_NAME}_shared |
| PROPERTIES LIBRARY_OUTPUT_DIRECTORY "${OUTPUT_PATH}" |
| RUNTIME_OUTPUT_DIRECTORY "${OUTPUT_PATH}" |
| PDB_OUTPUT_DIRECTORY "${OUTPUT_PATH}" |
| LINK_FLAGS "${ARG_SHARED_LINK_FLAGS}" |
| OUTPUT_NAME ${LIB_NAME} |
| VERSION "${ADBC_FULL_SO_VERSION}" |
| SOVERSION "${ADBC_SO_VERSION}") |
| |
| # https://github.com/apache/arrow-adbc/issues/81 |
| target_compile_features(${LIB_NAME}_shared PRIVATE cxx_std_11) |
| |
| target_link_libraries(${LIB_NAME}_shared |
| LINK_PUBLIC |
| "$<BUILD_INTERFACE:${ARG_SHARED_LINK_LIBS}>" |
| "$<INSTALL_INTERFACE:${ARG_SHARED_INSTALL_INTERFACE_LIBS}>" |
| LINK_PRIVATE |
| ${ARG_SHARED_PRIVATE_LINK_LIBS}) |
| |
| if(USE_OBJLIB) |
| # Ensure that dependencies are built before compilation of objects in |
| # object library, rather than only before the final link step |
| foreach(SHARED_LINK_LIB ${ARG_SHARED_LINK_LIBS}) |
| if(TARGET ${SHARED_LINK_LIB}) |
| add_dependencies(${LIB_NAME}_objlib ${SHARED_LINK_LIB}) |
| endif() |
| endforeach() |
| endif() |
| |
| if(ADBC_RPATH_ORIGIN) |
| if(APPLE) |
| set(_lib_install_rpath "@loader_path") |
| else() |
| set(_lib_install_rpath "\$ORIGIN") |
| endif() |
| set_target_properties(${LIB_NAME}_shared PROPERTIES INSTALL_RPATH |
| ${_lib_install_rpath}) |
| endif() |
| |
| if(APPLE) |
| if(ADBC_INSTALL_NAME_RPATH) |
| set(_lib_install_name "@rpath") |
| else() |
| set(_lib_install_name "${CMAKE_INSTALL_PREFIX}/${CMAKE_INSTALL_LIBDIR}") |
| endif() |
| set_target_properties(${LIB_NAME}_shared |
| PROPERTIES BUILD_WITH_INSTALL_RPATH ON INSTALL_NAME_DIR |
| "${_lib_install_name}") |
| endif() |
| |
| install(TARGETS ${LIB_NAME}_shared ${INSTALL_IS_OPTIONAL} |
| EXPORT ${LIB_NAME}_targets |
| RUNTIME DESTINATION ${RUNTIME_INSTALL_DIR} |
| LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} |
| ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR} |
| INCLUDES |
| DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}) |
| endif() |
| |
| if(BUILD_STATIC) |
| add_library(${LIB_NAME}_static STATIC ${LIB_DEPS}) |
| target_compile_features(${LIB_NAME}_static PRIVATE cxx_std_11) |
| set_property(TARGET ${LIB_NAME}_static PROPERTY CXX_STANDARD_REQUIRED ON) |
| adbc_configure_target(${LIB_NAME}_static) |
| if(EXTRA_DEPS) |
| add_dependencies(${LIB_NAME}_static ${EXTRA_DEPS}) |
| endif() |
| |
| if(ARG_PRECOMPILED_HEADER_LIB) |
| reuse_precompiled_header_lib(${LIB_NAME}_static ${ARG_PRECOMPILED_HEADER_LIB}) |
| endif() |
| |
| if(ARG_OUTPUTS) |
| list(APPEND ${ARG_OUTPUTS} ${LIB_NAME}_static) |
| endif() |
| |
| if(LIB_INCLUDES) |
| target_include_directories(${LIB_NAME}_static SYSTEM PUBLIC ${ARG_EXTRA_INCLUDES}) |
| endif() |
| |
| if(ARG_PRIVATE_INCLUDES) |
| target_include_directories(${LIB_NAME}_static PRIVATE ${ARG_PRIVATE_INCLUDES}) |
| endif() |
| |
| if(MSVC_TOOLCHAIN) |
| set(LIB_NAME_STATIC ${LIB_NAME}_static) |
| else() |
| set(LIB_NAME_STATIC ${LIB_NAME}) |
| endif() |
| |
| if(WIN32) |
| target_compile_definitions(${LIB_NAME}_static PUBLIC ADBC_STATIC) |
| target_compile_definitions(${LIB_NAME}_static PUBLIC ADBC_FLIGHT_STATIC) |
| endif() |
| |
| set_target_properties(${LIB_NAME}_static |
| PROPERTIES LIBRARY_OUTPUT_DIRECTORY "${OUTPUT_PATH}" |
| OUTPUT_NAME ${LIB_NAME_STATIC}) |
| |
| # https://github.com/apache/arrow-adbc/issues/81 |
| target_compile_features(${LIB_NAME}_static PRIVATE cxx_std_11) |
| |
| if(ARG_STATIC_INSTALL_INTERFACE_LIBS) |
| target_link_libraries(${LIB_NAME}_static LINK_PUBLIC |
| "$<INSTALL_INTERFACE:${ARG_STATIC_INSTALL_INTERFACE_LIBS}>") |
| endif() |
| |
| if(ARG_STATIC_LINK_LIBS) |
| target_link_libraries(${LIB_NAME}_static LINK_PRIVATE |
| "$<BUILD_INTERFACE:${ARG_STATIC_LINK_LIBS}>") |
| if(USE_OBJLIB) |
| # Ensure that dependencies are built before compilation of objects in |
| # object library, rather than only before the final link step |
| foreach(STATIC_LINK_LIB ${ARG_STATIC_LINK_LIBS}) |
| if(TARGET ${STATIC_LINK_LIB}) |
| add_dependencies(${LIB_NAME}_objlib ${STATIC_LINK_LIB}) |
| endif() |
| endforeach() |
| endif() |
| endif() |
| |
| install(TARGETS ${LIB_NAME}_static ${INSTALL_IS_OPTIONAL} |
| EXPORT ${LIB_NAME}_targets |
| RUNTIME DESTINATION ${RUNTIME_INSTALL_DIR} |
| LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} |
| ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR} |
| INCLUDES |
| DESTINATION ${CMAKE_INSTALL_INCLUDEDIR}) |
| endif() |
| |
| if(ARG_CMAKE_PACKAGE_NAME) |
| arrow_install_cmake_package(${ARG_CMAKE_PACKAGE_NAME} ${LIB_NAME}_targets) |
| endif() |
| |
| if(ARG_PKG_CONFIG_NAME) |
| arrow_add_pkg_config("${ARG_PKG_CONFIG_NAME}") |
| endif() |
| |
| # Modify variable in calling scope |
| if(ARG_OUTPUTS) |
| set(${ARG_OUTPUTS} |
| ${${ARG_OUTPUTS}} |
| PARENT_SCOPE) |
| endif() |
| endfunction() |
| |
| # |
| # Benchmarking |
| # |
| # Add a new micro benchmark, with or without an executable that should be built. |
| # If benchmarks are enabled then they will be run along side unit tests with ctest. |
| # 'make benchmark' and 'make unittest' to build/run only benchmark or unittests, |
| # respectively. |
| # |
| # REL_BENCHMARK_NAME is the name of the benchmark app. It may be a single component |
| # (e.g. monotime-benchmark) or contain additional components (e.g. |
| # net/net_util-benchmark). Either way, the last component must be a globally |
| # unique name. |
| |
| # The benchmark will registered as unit test with ctest with a label |
| # of 'benchmark'. |
| # |
| # Arguments after the test name will be passed to set_tests_properties(). |
| # |
| # \arg PREFIX a string to append to the name of the benchmark executable. For |
| # example, if you have src/arrow/foo/bar-benchmark.cc, then PREFIX "foo" will |
| # create test executable foo-bar-benchmark |
| # \arg LABELS the benchmark label or labels to assign the unit tests to. By |
| # default, benchmarks will go in the "benchmark" group. Custom targets for the |
| # group names must exist |
| function(ADD_BENCHMARK REL_BENCHMARK_NAME) |
| set(options) |
| set(one_value_args) |
| set(multi_value_args |
| EXTRA_LINK_LIBS |
| STATIC_LINK_LIBS |
| DEPENDENCIES |
| SOURCES |
| PREFIX |
| LABELS) |
| cmake_parse_arguments(ARG |
| "${options}" |
| "${one_value_args}" |
| "${multi_value_args}" |
| ${ARGN}) |
| if(ARG_UNPARSED_ARGUMENTS) |
| message(SEND_ERROR "Error: unrecognized arguments: ${ARG_UNPARSED_ARGUMENTS}") |
| endif() |
| |
| if(NO_BENCHMARKS) |
| return() |
| endif() |
| get_filename_component(BENCHMARK_NAME ${REL_BENCHMARK_NAME} NAME_WE) |
| |
| if(ARG_PREFIX) |
| set(BENCHMARK_NAME "${ARG_PREFIX}-${BENCHMARK_NAME}") |
| endif() |
| |
| if(ARG_SOURCES) |
| set(SOURCES ${ARG_SOURCES}) |
| else() |
| set(SOURCES "${REL_BENCHMARK_NAME}.cc") |
| endif() |
| |
| # Make sure the executable name contains only hyphens, not underscores |
| string(REPLACE "_" "-" BENCHMARK_NAME ${BENCHMARK_NAME}) |
| |
| if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/${REL_BENCHMARK_NAME}.cc) |
| # This benchmark has a corresponding .cc file, set it up as an executable. |
| set(BENCHMARK_PATH "${CMAKE_CURRENT_BINARY_DIR}/${BENCHMARK_NAME}") |
| add_executable(${BENCHMARK_NAME} ${SOURCES}) |
| |
| if(ARG_STATIC_LINK_LIBS) |
| # Customize link libraries |
| target_link_libraries(${BENCHMARK_NAME} PRIVATE ${ARG_STATIC_LINK_LIBS}) |
| else() |
| target_link_libraries(${BENCHMARK_NAME} PRIVATE ${ADBC_BENCHMARK_LINK_LIBS}) |
| endif() |
| add_dependencies(benchmark ${BENCHMARK_NAME}) |
| |
| if(ARG_EXTRA_LINK_LIBS) |
| target_link_libraries(${BENCHMARK_NAME} PRIVATE ${ARG_EXTRA_LINK_LIBS}) |
| endif() |
| else() |
| # No executable, just invoke the benchmark (probably a script) directly. |
| set(BENCHMARK_PATH ${CMAKE_CURRENT_SOURCE_DIR}/${REL_BENCHMARK_NAME}) |
| endif() |
| |
| # With OSX and conda, we need to set the correct RPATH so that dependencies |
| # are found. The installed libraries with conda have an RPATH that matches |
| # for executables and libraries lying in $ENV{CONDA_PREFIX}/bin or |
| # $ENV{CONDA_PREFIX}/lib but our test libraries and executables are not |
| # installed there. |
| if(NOT "$ENV{CONDA_PREFIX}" STREQUAL "" AND APPLE) |
| set_target_properties(${BENCHMARK_NAME} |
| PROPERTIES BUILD_WITH_INSTALL_RPATH TRUE |
| INSTALL_RPATH_USE_LINK_PATH TRUE |
| INSTALL_RPATH |
| "$ENV{CONDA_PREFIX}/lib;${EXECUTABLE_OUTPUT_PATH}") |
| endif() |
| |
| # Add test as dependency of relevant label targets |
| add_dependencies(all-benchmarks ${BENCHMARK_NAME}) |
| foreach(TARGET ${ARG_LABELS}) |
| add_dependencies(${TARGET} ${BENCHMARK_NAME}) |
| endforeach() |
| |
| if(ARG_DEPENDENCIES) |
| add_dependencies(${BENCHMARK_NAME} ${ARG_DEPENDENCIES}) |
| endif() |
| |
| if(ARG_LABELS) |
| set(ARG_LABELS "benchmark;${ARG_LABELS}") |
| else() |
| set(ARG_LABELS benchmark) |
| endif() |
| |
| if(ADBC_BUILD_DETAILED_BENCHMARKS) |
| target_compile_definitions(${BENCHMARK_NAME} PRIVATE ADBC_BUILD_DETAILED_BENCHMARKS) |
| endif() |
| |
| add_test(${BENCHMARK_NAME} |
| ${BUILD_SUPPORT_DIR}/run-test.sh |
| ${CMAKE_BINARY_DIR} |
| benchmark |
| ${BENCHMARK_PATH}) |
| set_property(TEST ${BENCHMARK_NAME} |
| APPEND |
| PROPERTY LABELS ${ARG_LABELS}) |
| endfunction() |
| |
| # |
| # Testing |
| # |
| # Add a new test case, with or without an executable that should be built. |
| # |
| # REL_TEST_NAME is the name of the test. It may be a single component |
| # (e.g. monotime-test) or contain additional components (e.g. |
| # net/net_util-test). Either way, the last component must be a globally |
| # unique name. |
| # |
| # If given, SOURCES is the list of C++ source files to compile into the test |
| # executable. Otherwise, "REL_TEST_NAME.cc" is used. |
| # |
| # The unit test is added with a label of "unittest" to support filtering with |
| # ctest. |
| # |
| # Arguments after the test name will be passed to set_tests_properties(). |
| # |
| # \arg ENABLED if passed, add this unit test even if ADBC_BUILD_TESTS is off |
| # \arg PREFIX a string to append to the name of the test executable. For |
| # example, if you have src/arrow/foo/bar-test.cc, then PREFIX "foo" will create |
| # test executable foo-bar-test |
| # \arg LABELS the unit test label or labels to assign the unit tests |
| # to. By default, unit tests will go in the "unittest" group, but if we have |
| # multiple unit tests in some subgroup, you can assign a test to multiple |
| # groups use the syntax unittest;GROUP2;GROUP3. Custom targets for the group |
| # names must exist |
| function(ADD_TEST_CASE REL_TEST_NAME) |
| set(options NO_VALGRIND ENABLED) |
| set(one_value_args PRECOMPILED_HEADER_LIB) |
| set(multi_value_args |
| SOURCES |
| PRECOMPILED_HEADERS |
| STATIC_LINK_LIBS |
| EXTRA_LINK_LIBS |
| EXTRA_INCLUDES |
| EXTRA_DEPENDENCIES |
| LABELS |
| EXTRA_LABELS |
| TEST_ARGUMENTS |
| PREFIX) |
| cmake_parse_arguments(ARG |
| "${options}" |
| "${one_value_args}" |
| "${multi_value_args}" |
| ${ARGN}) |
| if(ARG_UNPARSED_ARGUMENTS) |
| message(SEND_ERROR "Error: unrecognized arguments: ${ARG_UNPARSED_ARGUMENTS}") |
| endif() |
| |
| if(NO_TESTS AND NOT ARG_ENABLED) |
| return() |
| endif() |
| get_filename_component(TEST_NAME ${REL_TEST_NAME} NAME_WE) |
| |
| if(ARG_PREFIX) |
| set(TEST_NAME "${ARG_PREFIX}-${TEST_NAME}") |
| endif() |
| |
| if(ARG_SOURCES) |
| set(SOURCES ${ARG_SOURCES}) |
| else() |
| set(SOURCES "${REL_TEST_NAME}.cc") |
| endif() |
| |
| # Make sure the executable name contains only hyphens, not underscores |
| string(REPLACE "_" "-" TEST_NAME ${TEST_NAME}) |
| |
| set(TEST_PATH "${EXECUTABLE_OUTPUT_PATH}/${TEST_NAME}") |
| add_executable(${TEST_NAME} ${SOURCES}) |
| adbc_configure_target(${TEST_NAME}) |
| |
| # With OSX and conda, we need to set the correct RPATH so that dependencies |
| # are found. The installed libraries with conda have an RPATH that matches |
| # for executables and libraries lying in $ENV{CONDA_PREFIX}/bin or |
| # $ENV{CONDA_PREFIX}/lib but our test libraries and executables are not |
| # installed there. |
| if(NOT "$ENV{CONDA_PREFIX}" STREQUAL "" AND APPLE) |
| set_target_properties(${TEST_NAME} |
| PROPERTIES BUILD_WITH_INSTALL_RPATH TRUE |
| INSTALL_RPATH_USE_LINK_PATH TRUE |
| INSTALL_RPATH |
| "${EXECUTABLE_OUTPUT_PATH};$ENV{CONDA_PREFIX}/lib") |
| endif() |
| |
| if(ARG_STATIC_LINK_LIBS) |
| # Customize link libraries |
| target_link_libraries(${TEST_NAME} PRIVATE ${ARG_STATIC_LINK_LIBS}) |
| else() |
| target_link_libraries(${TEST_NAME} PRIVATE ${ADBC_TEST_LINK_LIBS}) |
| endif() |
| |
| if(ARG_PRECOMPILED_HEADER_LIB) |
| reuse_precompiled_header_lib(${TEST_NAME} ${ARG_PRECOMPILED_HEADER_LIB}) |
| endif() |
| |
| if(ARG_PRECOMPILED_HEADERS AND ADBC_USE_PRECOMPILED_HEADERS) |
| target_precompile_headers(${TEST_NAME} PRIVATE ${ARG_PRECOMPILED_HEADERS}) |
| endif() |
| |
| if(ARG_EXTRA_LINK_LIBS) |
| target_link_libraries(${TEST_NAME} PRIVATE ${ARG_EXTRA_LINK_LIBS}) |
| endif() |
| |
| if(ARG_EXTRA_INCLUDES) |
| target_include_directories(${TEST_NAME} SYSTEM PUBLIC ${ARG_EXTRA_INCLUDES}) |
| endif() |
| |
| if(ARG_EXTRA_DEPENDENCIES) |
| add_dependencies(${TEST_NAME} ${ARG_EXTRA_DEPENDENCIES}) |
| endif() |
| |
| if(ADBC_TEST_MEMCHECK AND NOT ARG_NO_VALGRIND) |
| add_test(${TEST_NAME} |
| bash |
| -c |
| "cd '${CMAKE_SOURCE_DIR}'; \ |
| valgrind --suppressions=valgrind.supp --tool=memcheck --gen-suppressions=all \ |
| --num-callers=500 --leak-check=full --leak-check-heuristics=stdstring \ |
| --error-exitcode=1 ${TEST_PATH} ${ARG_TEST_ARGUMENTS}") |
| else() |
| add_test(${TEST_NAME} ${TEST_PATH} ${ARG_TEST_ARGUMENTS}) |
| endif() |
| |
| # Add test as dependency of relevant targets |
| add_dependencies(all-tests ${TEST_NAME}) |
| foreach(TARGET ${ARG_LABELS}) |
| add_dependencies(${TARGET} ${TEST_NAME}) |
| endforeach() |
| |
| set(LABELS) |
| list(APPEND LABELS "unittest") |
| if(ARG_LABELS) |
| list(APPEND LABELS ${ARG_LABELS}) |
| endif() |
| # EXTRA_LABELS don't create their own dependencies, they are only used |
| # to ease running certain test categories. |
| if(ARG_EXTRA_LABELS) |
| list(APPEND LABELS ${ARG_EXTRA_LABELS}) |
| endif() |
| |
| foreach(LABEL ${ARG_LABELS}) |
| # ensure there is a cmake target which exercises tests with this LABEL |
| set(LABEL_TEST_NAME "test-${LABEL}") |
| if(NOT TARGET ${LABEL_TEST_NAME}) |
| add_custom_target(${LABEL_TEST_NAME} |
| ctest -L "${LABEL}" --output-on-failure |
| USES_TERMINAL) |
| endif() |
| # ensure the test is (re)built before the LABEL test runs |
| add_dependencies(${LABEL_TEST_NAME} ${TEST_NAME}) |
| endforeach() |
| |
| set_property(TEST ${TEST_NAME} |
| APPEND |
| PROPERTY LABELS ${LABELS}) |
| endfunction() |
| |
| # |
| # Examples |
| # |
| # Add a new example, with or without an executable that should be built. |
| # If examples are enabled then they will be run along side unit tests with ctest. |
| # 'make runexample' to build/run only examples. |
| # |
| # REL_EXAMPLE_NAME is the name of the example app. It may be a single component |
| # (e.g. monotime-example) or contain additional components (e.g. |
| # net/net_util-example). Either way, the last component must be a globally |
| # unique name. |
| |
| # The example will registered as unit test with ctest with a label |
| # of 'example'. |
| # |
| # Arguments after the test name will be passed to set_tests_properties(). |
| # |
| # \arg PREFIX a string to append to the name of the example executable. For |
| # example, if you have src/arrow/foo/bar-example.cc, then PREFIX "foo" will |
| # create test executable foo-bar-example |
| function(ADD_ARROW_EXAMPLE REL_EXAMPLE_NAME) |
| set(options) |
| set(one_value_args) |
| set(multi_value_args |
| EXTRA_INCLUDES |
| EXTRA_LINK_LIBS |
| EXTRA_SOURCES |
| DEPENDENCIES |
| PREFIX) |
| cmake_parse_arguments(ARG |
| "${options}" |
| "${one_value_args}" |
| "${multi_value_args}" |
| ${ARGN}) |
| if(ARG_UNPARSED_ARGUMENTS) |
| message(SEND_ERROR "Error: unrecognized arguments: ${ARG_UNPARSED_ARGUMENTS}") |
| endif() |
| |
| if(NO_EXAMPLES) |
| return() |
| endif() |
| get_filename_component(EXAMPLE_NAME ${REL_EXAMPLE_NAME} NAME_WE) |
| |
| if(ARG_PREFIX) |
| set(EXAMPLE_NAME "${ARG_PREFIX}-${EXAMPLE_NAME}") |
| endif() |
| |
| # Make sure the executable name contains only hyphens, not underscores |
| string(REPLACE "_" "-" EXAMPLE_NAME ${EXAMPLE_NAME}) |
| |
| if(EXISTS ${CMAKE_SOURCE_DIR}/examples/arrow/${REL_EXAMPLE_NAME}.cc) |
| # This example has a corresponding .cc file, set it up as an executable. |
| set(EXAMPLE_PATH "${EXECUTABLE_OUTPUT_PATH}/${EXAMPLE_NAME}") |
| add_executable(${EXAMPLE_NAME} "${REL_EXAMPLE_NAME}.cc" ${ARG_EXTRA_SOURCES}) |
| target_link_libraries(${EXAMPLE_NAME} ${ADBC_EXAMPLE_LINK_LIBS}) |
| add_dependencies(runexample ${EXAMPLE_NAME}) |
| set(NO_COLOR "--color_print=false") |
| |
| if(ARG_EXTRA_LINK_LIBS) |
| target_link_libraries(${EXAMPLE_NAME} ${ARG_EXTRA_LINK_LIBS}) |
| endif() |
| endif() |
| |
| if(ARG_DEPENDENCIES) |
| add_dependencies(${EXAMPLE_NAME} ${ARG_DEPENDENCIES}) |
| endif() |
| |
| if(ARG_EXTRA_INCLUDES) |
| target_include_directories(${EXAMPLE_NAME} SYSTEM PUBLIC ${ARG_EXTRA_INCLUDES}) |
| endif() |
| |
| add_test(${EXAMPLE_NAME} ${EXAMPLE_PATH}) |
| set_tests_properties(${EXAMPLE_NAME} PROPERTIES LABELS "example") |
| endfunction() |
| |
| # |
| # Fuzzing |
| # |
| # Add new fuzz target executable. |
| # |
| # The single source file must define a function: |
| # extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) |
| # |
| # No main function must be present within the source file! |
| # |
| function(ADD_FUZZ_TARGET REL_FUZZING_NAME) |
| set(options) |
| set(one_value_args PREFIX) |
| set(multi_value_args LINK_LIBS) |
| cmake_parse_arguments(ARG |
| "${options}" |
| "${one_value_args}" |
| "${multi_value_args}" |
| ${ARGN}) |
| if(ARG_UNPARSED_ARGUMENTS) |
| message(SEND_ERROR "Error: unrecognized arguments: ${ARG_UNPARSED_ARGUMENTS}") |
| endif() |
| |
| if(NO_FUZZING) |
| return() |
| endif() |
| |
| get_filename_component(FUZZING_NAME ${REL_FUZZING_NAME} NAME_WE) |
| |
| # Make sure the executable name contains only hyphens, not underscores |
| string(REPLACE "_" "-" FUZZING_NAME ${FUZZING_NAME}) |
| |
| if(ARG_PREFIX) |
| set(FUZZING_NAME "${ARG_PREFIX}-${FUZZING_NAME}") |
| endif() |
| |
| # For OSS-Fuzz |
| # (https://google.github.io/oss-fuzz/advanced-topics/ideal-integration/) |
| if(DEFINED ENV{LIB_FUZZING_ENGINE}) |
| set(FUZZ_LDFLAGS $ENV{LIB_FUZZING_ENGINE}) |
| else() |
| set(FUZZ_LDFLAGS "-fsanitize=fuzzer") |
| endif() |
| |
| add_executable(${FUZZING_NAME} "${REL_FUZZING_NAME}.cc") |
| target_link_libraries(${FUZZING_NAME} ${LINK_LIBS}) |
| target_compile_options(${FUZZING_NAME} PRIVATE ${FUZZ_LDFLAGS}) |
| set_target_properties(${FUZZING_NAME} PROPERTIES LINK_FLAGS ${FUZZ_LDFLAGS} LABELS |
| "fuzzing") |
| endfunction() |
| |
| function(ARROW_INSTALL_ALL_HEADERS PATH) |
| set(options) |
| set(one_value_args) |
| set(multi_value_args PATTERN) |
| cmake_parse_arguments(ARG |
| "${options}" |
| "${one_value_args}" |
| "${multi_value_args}" |
| ${ARGN}) |
| if(NOT ARG_PATTERN) |
| # The .hpp extension is used by some vendored libraries |
| set(ARG_PATTERN "*.h" "*.hpp") |
| endif() |
| file(GLOB CURRENT_DIRECTORY_HEADERS ${ARG_PATTERN}) |
| |
| set(PUBLIC_HEADERS) |
| foreach(HEADER ${CURRENT_DIRECTORY_HEADERS}) |
| get_filename_component(HEADER_BASENAME ${HEADER} NAME) |
| if(HEADER_BASENAME MATCHES "internal") |
| continue() |
| endif() |
| list(APPEND PUBLIC_HEADERS ${HEADER}) |
| endforeach() |
| install(FILES ${PUBLIC_HEADERS} DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}/${PATH}") |
| endfunction() |
| |
| function(ARROW_ADD_PKG_CONFIG MODULE) |
| configure_file(${MODULE}.pc.in "${CMAKE_CURRENT_BINARY_DIR}/${MODULE}.pc" @ONLY) |
| install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${MODULE}.pc" |
| DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig/") |
| endfunction() |
| |
| function(ARROW_INSTALL_CMAKE_FIND_MODULE MODULE) |
| install(FILES "${ADBC_SOURCE_DIR}/cmake_modules/Find${MODULE}.cmake" |
| DESTINATION "${ADBC_CMAKE_INSTALL_DIR}") |
| endfunction() |
| |
| # Implementations of lisp "car" and "cdr" functions |
| macro(ARROW_CAR var) |
| set(${var} ${ARGV1}) |
| endmacro() |
| |
| macro(ARROW_CDR var rest) |
| set(${var} ${ARGN}) |
| endmacro() |
