| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef APR_FILE_INFO_H |
| #define APR_FILE_INFO_H |
| |
| /** |
| * @file apr_file_info.h |
| * @brief APR File Information |
| */ |
| |
| #include "apr.h" |
| #include "apr_user.h" |
| #include "apr_pools.h" |
| #include "apr_tables.h" |
| #include "apr_time.h" |
| #include "apr_errno.h" |
| |
| #if APR_HAVE_SYS_UIO_H |
| #include <sys/uio.h> |
| #endif |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /** |
| * @defgroup apr_file_info File Information |
| * @ingroup APR |
| * @{ |
| */ |
| |
| /* Many applications use the type member to determine the |
| * existance of a file or initialization of the file info, |
| * so the APR_NOFILE value must be distinct from APR_UNKFILE. |
| */ |
| |
| /** apr_filetype_e values for the filetype member of the |
| * apr_file_info_t structure |
| * @warning: Not all of the filetypes below can be determined. |
| * For example, a given platform might not correctly report |
| * a socket descriptor as APR_SOCK if that type isn't |
| * well-identified on that platform. In such cases where |
| * a filetype exists but cannot be described by the recognized |
| * flags below, the filetype will be APR_UNKFILE. If the |
| * filetype member is not determined, the type will be APR_NOFILE. |
| */ |
| |
| typedef enum { |
| APR_NOFILE = 0, /**< no file type determined */ |
| APR_REG, /**< a regular file */ |
| APR_DIR, /**< a directory */ |
| APR_CHR, /**< a character device */ |
| APR_BLK, /**< a block device */ |
| APR_PIPE, /**< a FIFO / pipe */ |
| APR_LNK, /**< a symbolic link */ |
| APR_SOCK, /**< a [unix domain] socket */ |
| APR_UNKFILE = 127 /**< a file of some other unknown type */ |
| } apr_filetype_e; |
| |
| /** |
| * @defgroup apr_file_permissions File Permissions flags |
| * @{ |
| */ |
| |
| #define APR_FPROT_USETID 0x8000 /**< Set user id */ |
| #define APR_FPROT_UREAD 0x0400 /**< Read by user */ |
| #define APR_FPROT_UWRITE 0x0200 /**< Write by user */ |
| #define APR_FPROT_UEXECUTE 0x0100 /**< Execute by user */ |
| |
| #define APR_FPROT_GSETID 0x4000 /**< Set group id */ |
| #define APR_FPROT_GREAD 0x0040 /**< Read by group */ |
| #define APR_FPROT_GWRITE 0x0020 /**< Write by group */ |
| #define APR_FPROT_GEXECUTE 0x0010 /**< Execute by group */ |
| |
| #define APR_FPROT_WSTICKY 0x2000 /**< Sticky bit */ |
| #define APR_FPROT_WREAD 0x0004 /**< Read by others */ |
| #define APR_FPROT_WWRITE 0x0002 /**< Write by others */ |
| #define APR_FPROT_WEXECUTE 0x0001 /**< Execute by others */ |
| |
| #define APR_FPROT_OS_DEFAULT 0x0FFF /**< use OS's default permissions */ |
| |
| /* additional permission flags for apr_file_copy and apr_file_append */ |
| #define APR_FPROT_FILE_SOURCE_PERMS 0x1000 /**< Copy source file's permissions */ |
| |
| /* backcompat */ |
| #define APR_USETID APR_FPROT_USETID /**< @deprecated @see APR_FPROT_USETID */ |
| #define APR_UREAD APR_FPROT_UREAD /**< @deprecated @see APR_FPROT_UREAD */ |
| #define APR_UWRITE APR_FPROT_UWRITE /**< @deprecated @see APR_FPROT_UWRITE */ |
| #define APR_UEXECUTE APR_FPROT_UEXECUTE /**< @deprecated @see APR_FPROT_UEXECUTE */ |
| #define APR_GSETID APR_FPROT_GSETID /**< @deprecated @see APR_FPROT_GSETID */ |
| #define APR_GREAD APR_FPROT_GREAD /**< @deprecated @see APR_FPROT_GREAD */ |
| #define APR_GWRITE APR_FPROT_GWRITE /**< @deprecated @see APR_FPROT_GWRITE */ |
| #define APR_GEXECUTE APR_FPROT_GEXECUTE /**< @deprecated @see APR_FPROT_GEXECUTE */ |
| #define APR_WSTICKY APR_FPROT_WSTICKY /**< @deprecated @see APR_FPROT_WSTICKY */ |
| #define APR_WREAD APR_FPROT_WREAD /**< @deprecated @see APR_FPROT_WREAD */ |
| #define APR_WWRITE APR_FPROT_WWRITE /**< @deprecated @see APR_FPROT_WWRITE */ |
| #define APR_WEXECUTE APR_FPROT_WEXECUTE /**< @deprecated @see APR_FPROT_WEXECUTE */ |
| #define APR_OS_DEFAULT APR_FPROT_OS_DEFAULT /**< @deprecated @see APR_FPROT_OS_DEFAULT */ |
| #define APR_FILE_SOURCE_PERMS APR_FPROT_FILE_SOURCE_PERMS /**< @deprecated @see APR_FPROT_FILE_SOURCE_PERMS */ |
| |
| /** @} */ |
| |
| |
| /** |
| * Structure for referencing directories. |
| */ |
| typedef struct apr_dir_t apr_dir_t; |
| /** |
| * Structure for determining file permissions. |
| */ |
| typedef apr_int32_t apr_fileperms_t; |
| #if (defined WIN32) || (defined NETWARE) |
| /** |
| * Structure for determining the device the file is on. |
| */ |
| typedef apr_uint32_t apr_dev_t; |
| #else |
| /** |
| * Structure for determining the device the file is on. |
| */ |
| typedef dev_t apr_dev_t; |
| #endif |
| |
| /* See apr.h.in (.hw or .hnw) for the declaration of apr_ino_t, |
| * but as we don't want to break users who author for 1.2.x, we |
| * can't present this type until they have included apr_file_info.h |
| * where it was originally declared in release 1.2.0. |
| * Unmask it for use here. |
| */ |
| #undef apr_ino_t |
| |
| /** |
| * @defgroup apr_file_stat Stat Functions |
| * @{ |
| */ |
| /** file info structure */ |
| typedef struct apr_finfo_t apr_finfo_t; |
| |
| #define APR_FINFO_LINK 0x00000001 /**< Stat the link not the file itself if it is a link */ |
| #define APR_FINFO_MTIME 0x00000010 /**< Modification Time */ |
| #define APR_FINFO_CTIME 0x00000020 /**< Creation or inode-changed time */ |
| #define APR_FINFO_ATIME 0x00000040 /**< Access Time */ |
| #define APR_FINFO_SIZE 0x00000100 /**< Size of the file */ |
| #define APR_FINFO_CSIZE 0x00000200 /**< Storage size consumed by the file */ |
| #define APR_FINFO_DEV 0x00001000 /**< Device */ |
| #define APR_FINFO_INODE 0x00002000 /**< Inode */ |
| #define APR_FINFO_NLINK 0x00004000 /**< Number of links */ |
| #define APR_FINFO_TYPE 0x00008000 /**< Type */ |
| #define APR_FINFO_USER 0x00010000 /**< User */ |
| #define APR_FINFO_GROUP 0x00020000 /**< Group */ |
| #define APR_FINFO_UPROT 0x00100000 /**< User protection bits */ |
| #define APR_FINFO_GPROT 0x00200000 /**< Group protection bits */ |
| #define APR_FINFO_WPROT 0x00400000 /**< World protection bits */ |
| #define APR_FINFO_ICASE 0x01000000 /**< if dev is case insensitive */ |
| #define APR_FINFO_NAME 0x02000000 /**< ->name in proper case */ |
| |
| #define APR_FINFO_MIN 0x00008170 /**< type, mtime, ctime, atime, size */ |
| #define APR_FINFO_IDENT 0x00003000 /**< dev and inode */ |
| #define APR_FINFO_OWNER 0x00030000 /**< user and group */ |
| #define APR_FINFO_PROT 0x00700000 /**< all protections */ |
| #define APR_FINFO_NORM 0x0073b170 /**< an atomic unix apr_stat() */ |
| #define APR_FINFO_DIRENT 0x02000000 /**< an atomic unix apr_dir_read() */ |
| |
| /** |
| * The file information structure. This is analogous to the POSIX |
| * stat structure. |
| */ |
| struct apr_finfo_t { |
| /** Allocates memory and closes lingering handles in the specified pool */ |
| apr_pool_t *pool; |
| /** The bitmask describing valid fields of this apr_finfo_t structure |
| * including all available 'wanted' fields and potentially more */ |
| apr_int32_t valid; |
| /** The access permissions of the file. Mimics Unix access rights. */ |
| apr_fileperms_t protection; |
| /** The type of file. One of APR_REG, APR_DIR, APR_CHR, APR_BLK, APR_PIPE, |
| * APR_LNK or APR_SOCK. If the type is undetermined, the value is APR_NOFILE. |
| * If the type cannot be determined, the value is APR_UNKFILE. |
| */ |
| apr_filetype_e filetype; |
| /** The user id that owns the file */ |
| apr_uid_t user; |
| /** The group id that owns the file */ |
| apr_gid_t group; |
| /** The inode of the file. */ |
| apr_ino_t inode; |
| /** The id of the device the file is on. */ |
| apr_dev_t device; |
| /** The number of hard links to the file. */ |
| apr_int32_t nlink; |
| /** The size of the file */ |
| apr_off_t size; |
| /** The storage size consumed by the file */ |
| apr_off_t csize; |
| /** The time the file was last accessed */ |
| apr_time_t atime; |
| /** The time the file was last modified */ |
| apr_time_t mtime; |
| /** The time the file was created, or the inode was last changed */ |
| apr_time_t ctime; |
| /** The pathname of the file (possibly unrooted) */ |
| const char *fname; |
| /** The file's name (no path) in filesystem case */ |
| const char *name; |
| /** The file's handle, if accessed (can be submitted to apr_duphandle) */ |
| struct apr_file_t *filehand; |
| }; |
| |
| /** |
| * get the specified file's stats. The file is specified by filename, |
| * instead of using a pre-opened file. |
| * @param finfo Where to store the information about the file, which is |
| * never touched if the call fails. |
| * @param fname The name of the file to stat. |
| * @param wanted The desired apr_finfo_t fields, as a bit flag of APR_FINFO_ |
| values |
| * @param pool the pool to use to allocate the new file. |
| * |
| * @note If @c APR_INCOMPLETE is returned all the fields in @a finfo may |
| * not be filled in, and you need to check the @c finfo->valid bitmask |
| * to verify that what you're looking for is there. |
| */ |
| APR_DECLARE(apr_status_t) apr_stat(apr_finfo_t *finfo, const char *fname, |
| apr_int32_t wanted, apr_pool_t *pool); |
| |
| /** @} */ |
| /** |
| * @defgroup apr_dir Directory Manipulation Functions |
| * @{ |
| */ |
| |
| /** |
| * Open the specified directory. |
| * @param new_dir The opened directory descriptor. |
| * @param dirname The full path to the directory (use / on all systems) |
| * @param pool The pool to use. |
| */ |
| APR_DECLARE(apr_status_t) apr_dir_open(apr_dir_t **new_dir, |
| const char *dirname, |
| apr_pool_t *pool); |
| |
| /** |
| * close the specified directory. |
| * @param thedir the directory descriptor to close. |
| */ |
| APR_DECLARE(apr_status_t) apr_dir_close(apr_dir_t *thedir); |
| |
| /** |
| * Read the next entry from the specified directory. |
| * @param finfo the file info structure and filled in by apr_dir_read |
| * @param wanted The desired apr_finfo_t fields, as a bit flag of APR_FINFO_ |
| values |
| * @param thedir the directory descriptor returned from apr_dir_open |
| * @remark No ordering is guaranteed for the entries read. |
| * |
| * @note If @c APR_INCOMPLETE is returned all the fields in @a finfo may |
| * not be filled in, and you need to check the @c finfo->valid bitmask |
| * to verify that what you're looking for is there. |
| */ |
| APR_DECLARE(apr_status_t) apr_dir_read(apr_finfo_t *finfo, apr_int32_t wanted, |
| apr_dir_t *thedir); |
| |
| /** |
| * Rewind the directory to the first entry. |
| * @param thedir the directory descriptor to rewind. |
| */ |
| APR_DECLARE(apr_status_t) apr_dir_rewind(apr_dir_t *thedir); |
| /** @} */ |
| |
| /** |
| * @defgroup apr_filepath Filepath Manipulation Functions |
| * @{ |
| */ |
| |
| /** Cause apr_filepath_merge to fail if addpath is above rootpath */ |
| #define APR_FILEPATH_NOTABOVEROOT 0x01 |
| |
| /** internal: Only meaningful with APR_FILEPATH_NOTABOVEROOT */ |
| #define APR_FILEPATH_SECUREROOTTEST 0x02 |
| |
| /** Cause apr_filepath_merge to fail if addpath is above rootpath, |
| * even given a rootpath /foo/bar and an addpath ../bar/bash |
| */ |
| #define APR_FILEPATH_SECUREROOT 0x03 |
| |
| /** Fail apr_filepath_merge if the merged path is relative */ |
| #define APR_FILEPATH_NOTRELATIVE 0x04 |
| |
| /** Fail apr_filepath_merge if the merged path is absolute */ |
| #define APR_FILEPATH_NOTABSOLUTE 0x08 |
| |
| /** Return the file system's native path format (e.g. path delimiters |
| * of ':' on MacOS9, '\' on Win32, etc.) */ |
| #define APR_FILEPATH_NATIVE 0x10 |
| |
| /** Resolve the true case of existing directories and file elements |
| * of addpath, (resolving any aliases on Win32) and append a proper |
| * trailing slash if a directory |
| */ |
| #define APR_FILEPATH_TRUENAME 0x20 |
| |
| /** |
| * Extract the rootpath from the given filepath |
| * @param rootpath the root file path returned with APR_SUCCESS or APR_EINCOMPLETE |
| * @param filepath the pathname to parse for its root component |
| * @param flags the desired rules to apply, from |
| * <PRE> |
| * APR_FILEPATH_NATIVE Use native path seperators (e.g. '\' on Win32) |
| * APR_FILEPATH_TRUENAME Tests that the root exists, and makes it proper |
| * </PRE> |
| * @param p the pool to allocate the new path string from |
| * @remark on return, filepath points to the first non-root character in the |
| * given filepath. In the simplest example, given a filepath of "/foo", |
| * returns the rootpath of "/" and filepath points at "foo". This is far |
| * more complex on other platforms, which will canonicalize the root form |
| * to a consistant format, given the APR_FILEPATH_TRUENAME flag, and also |
| * test for the validity of that root (e.g., that a drive d:/ or network |
| * share //machine/foovol/). |
| * The function returns APR_ERELATIVE if filepath isn't rooted (an |
| * error), APR_EINCOMPLETE if the root path is ambigious (but potentially |
| * legitimate, e.g. "/" on Windows is incomplete because it doesn't specify |
| * the drive letter), or APR_EBADPATH if the root is simply invalid. |
| * APR_SUCCESS is returned if filepath is an absolute path. |
| */ |
| APR_DECLARE(apr_status_t) apr_filepath_root(const char **rootpath, |
| const char **filepath, |
| apr_int32_t flags, |
| apr_pool_t *p); |
| |
| /** |
| * Merge additional file path onto the previously processed rootpath |
| * @param newpath the merged paths returned |
| * @param rootpath the root file path (NULL uses the current working path) |
| * @param addpath the path to add to the root path |
| * @param flags the desired APR_FILEPATH_ rules to apply when merging |
| * @param p the pool to allocate the new path string from |
| * @remark if the flag APR_FILEPATH_TRUENAME is given, and the addpath |
| * contains wildcard characters ('*', '?') on platforms that don't support |
| * such characters within filenames, the paths will be merged, but the |
| * result code will be APR_EPATHWILD, and all further segments will not |
| * reflect the true filenames including the wildcard and following segments. |
| */ |
| APR_DECLARE(apr_status_t) apr_filepath_merge(char **newpath, |
| const char *rootpath, |
| const char *addpath, |
| apr_int32_t flags, |
| apr_pool_t *p); |
| |
| /** |
| * Split a search path into separate components |
| * @param pathelts the returned components of the search path |
| * @param liststr the search path (e.g., <tt>getenv("PATH")</tt>) |
| * @param p the pool to allocate the array and path components from |
| * @remark empty path componenta do not become part of @a pathelts. |
| * @remark the path separator in @a liststr is system specific; |
| * e.g., ':' on Unix, ';' on Windows, etc. |
| */ |
| APR_DECLARE(apr_status_t) apr_filepath_list_split(apr_array_header_t **pathelts, |
| const char *liststr, |
| apr_pool_t *p); |
| |
| /** |
| * Merge a list of search path components into a single search path |
| * @param liststr the returned search path; may be NULL if @a pathelts is empty |
| * @param pathelts the components of the search path |
| * @param p the pool to allocate the search path from |
| * @remark emtpy strings in the source array are ignored. |
| * @remark the path separator in @a liststr is system specific; |
| * e.g., ':' on Unix, ';' on Windows, etc. |
| */ |
| APR_DECLARE(apr_status_t) apr_filepath_list_merge(char **liststr, |
| apr_array_header_t *pathelts, |
| apr_pool_t *p); |
| |
| /** |
| * Return the default file path (for relative file names) |
| * @param path the default path string returned |
| * @param flags optional flag APR_FILEPATH_NATIVE to retrieve the |
| * default file path in os-native format. |
| * @param p the pool to allocate the default path string from |
| */ |
| APR_DECLARE(apr_status_t) apr_filepath_get(char **path, apr_int32_t flags, |
| apr_pool_t *p); |
| |
| /** |
| * Set the default file path (for relative file names) |
| * @param path the default path returned |
| * @param p the pool to allocate any working storage |
| */ |
| APR_DECLARE(apr_status_t) apr_filepath_set(const char *path, apr_pool_t *p); |
| |
| /** The FilePath character encoding is unknown */ |
| #define APR_FILEPATH_ENCODING_UNKNOWN 0 |
| |
| /** The FilePath character encoding is locale-dependent */ |
| #define APR_FILEPATH_ENCODING_LOCALE 1 |
| |
| /** The FilePath character encoding is UTF-8 */ |
| #define APR_FILEPATH_ENCODING_UTF8 2 |
| |
| /** |
| * Determine the encoding used internally by the FilePath functions |
| * @param style points to a variable which receives the encoding style flag |
| * @param p the pool to allocate any working storage |
| * @remark Use @c apr_os_locale_encoding and/or @c apr_os_default_encoding |
| * to get the name of the path encoding if it's not UTF-8. |
| */ |
| APR_DECLARE(apr_status_t) apr_filepath_encoding(int *style, apr_pool_t *p); |
| /** @} */ |
| |
| /** @} */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* ! APR_FILE_INFO_H */ |