| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef APR_POLL_H |
| #define APR_POLL_H |
| /** |
| * @file apr_poll.h |
| * @brief APR Poll interface |
| */ |
| #include "apr.h" |
| #include "apr_pools.h" |
| #include "apr_errno.h" |
| #include "apr_inherit.h" |
| #include "apr_file_io.h" |
| #include "apr_network_io.h" |
| |
| #if APR_HAVE_NETINET_IN_H |
| #include <netinet/in.h> |
| #endif |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /** |
| * @defgroup apr_poll Poll Routines |
| * @ingroup APR |
| * @{ |
| */ |
| |
| /** |
| * @defgroup pollopts Poll options |
| * @ingroup apr_poll |
| * @{ |
| */ |
| #define APR_POLLIN 0x001 /**< Can read without blocking */ |
| #define APR_POLLPRI 0x002 /**< Priority data available */ |
| #define APR_POLLOUT 0x004 /**< Can write without blocking */ |
| #define APR_POLLERR 0x010 /**< Pending error */ |
| #define APR_POLLHUP 0x020 /**< Hangup occurred */ |
| #define APR_POLLNVAL 0x040 /**< Descriptor invalid */ |
| /** @} */ |
| |
| /** |
| * @defgroup pollflags Pollset Flags |
| * @ingroup apr_poll |
| * @{ |
| */ |
| #define APR_POLLSET_THREADSAFE 0x001 /**< Adding or removing a descriptor is |
| * thread-safe |
| */ |
| #define APR_POLLSET_NOCOPY 0x002 /**< Descriptors passed to apr_pollset_add() |
| * are not copied |
| */ |
| #define APR_POLLSET_WAKEABLE 0x004 /**< Poll operations are interruptable by |
| * apr_pollset_wakeup() or apr_pollcb_wakeup() |
| */ |
| #define APR_POLLSET_NODEFAULT 0x010 /**< Do not try to use the default method if |
| * the specified non-default method cannot be |
| * used |
| */ |
| /** @} */ |
| |
| /** |
| * Pollset Methods |
| */ |
| typedef enum { |
| APR_POLLSET_DEFAULT, /**< Platform default poll method */ |
| APR_POLLSET_SELECT, /**< Poll uses select method */ |
| APR_POLLSET_KQUEUE, /**< Poll uses kqueue method */ |
| APR_POLLSET_PORT, /**< Poll uses Solaris event port method */ |
| APR_POLLSET_EPOLL, /**< Poll uses epoll method */ |
| APR_POLLSET_POLL, /**< Poll uses poll method */ |
| APR_POLLSET_AIO_MSGQ /**< Poll uses z/OS asio method */ |
| } apr_pollset_method_e; |
| |
| /** Used in apr_pollfd_t to determine what the apr_descriptor is */ |
| typedef enum { |
| APR_NO_DESC, /**< nothing here */ |
| APR_POLL_SOCKET, /**< descriptor refers to a socket */ |
| APR_POLL_FILE, /**< descriptor refers to a file */ |
| APR_POLL_LASTDESC /**< @deprecated descriptor is the last one in the list */ |
| } apr_datatype_e ; |
| |
| /** Union of either an APR file or socket. */ |
| typedef union { |
| apr_file_t *f; /**< file */ |
| apr_socket_t *s; /**< socket */ |
| } apr_descriptor; |
| |
| /** @see apr_pollfd_t */ |
| typedef struct apr_pollfd_t apr_pollfd_t; |
| |
| /** Poll descriptor set. */ |
| struct apr_pollfd_t { |
| apr_pool_t *p; /**< associated pool */ |
| apr_datatype_e desc_type; /**< descriptor type */ |
| apr_int16_t reqevents; /**< requested events */ |
| apr_int16_t rtnevents; /**< returned events */ |
| apr_descriptor desc; /**< @see apr_descriptor */ |
| void *client_data; /**< allows app to associate context */ |
| }; |
| |
| |
| /* General-purpose poll API for arbitrarily large numbers of |
| * file descriptors |
| */ |
| |
| /** Opaque structure used for pollset API */ |
| typedef struct apr_pollset_t apr_pollset_t; |
| |
| /** |
| * Set up a pollset object |
| * @param pollset The pointer in which to return the newly created object |
| * @param size The maximum number of descriptors that this pollset can hold |
| * @param p The pool from which to allocate the pollset |
| * @param flags Optional flags to modify the operation of the pollset. |
| * |
| * @remark If flags contains APR_POLLSET_THREADSAFE, then a pollset is |
| * created on which it is safe to make concurrent calls to |
| * apr_pollset_add(), apr_pollset_remove() and apr_pollset_poll() |
| * from separate threads. This feature is only supported on some |
| * platforms; the apr_pollset_create() call will fail with |
| * APR_ENOTIMPL on platforms where it is not supported. |
| * @remark If flags contains APR_POLLSET_WAKEABLE, then a pollset is |
| * created with an additional internal pipe object used for the |
| * apr_pollset_wakeup() call. The actual size of pollset is |
| * in that case @a size + 1. This feature is only supported on some |
| * platforms; the apr_pollset_create() call will fail with |
| * APR_ENOTIMPL on platforms where it is not supported. |
| * @remark If flags contains APR_POLLSET_NOCOPY, then the apr_pollfd_t |
| * structures passed to apr_pollset_add() are not copied and |
| * must have a lifetime at least as long as the pollset. |
| * @remark Some poll methods (including APR_POLLSET_KQUEUE, |
| * APR_POLLSET_PORT, and APR_POLLSET_EPOLL) do not have a |
| * fixed limit on the size of the pollset. For these methods, |
| * the size parameter controls the maximum number of |
| * descriptors that will be returned by a single call to |
| * apr_pollset_poll(). |
| */ |
| APR_DECLARE(apr_status_t) apr_pollset_create(apr_pollset_t **pollset, |
| apr_uint32_t size, |
| apr_pool_t *p, |
| apr_uint32_t flags); |
| |
| /** |
| * Set up a pollset object |
| * @param pollset The pointer in which to return the newly created object |
| * @param size The maximum number of descriptors that this pollset can hold |
| * @param p The pool from which to allocate the pollset |
| * @param flags Optional flags to modify the operation of the pollset. |
| * @param method Poll method to use. See #apr_pollset_method_e. If this |
| * method cannot be used, the default method will be used unless the |
| * APR_POLLSET_NODEFAULT flag has been specified. |
| * |
| * @remark If flags contains APR_POLLSET_THREADSAFE, then a pollset is |
| * created on which it is safe to make concurrent calls to |
| * apr_pollset_add(), apr_pollset_remove() and apr_pollset_poll() |
| * from separate threads. This feature is only supported on some |
| * platforms; the apr_pollset_create_ex() call will fail with |
| * APR_ENOTIMPL on platforms where it is not supported. |
| * @remark If flags contains APR_POLLSET_WAKEABLE, then a pollset is |
| * created with additional internal pipe object used for the |
| * apr_pollset_wakeup() call. The actual size of pollset is |
| * in that case size + 1. This feature is only supported on some |
| * platforms; the apr_pollset_create_ex() call will fail with |
| * APR_ENOTIMPL on platforms where it is not supported. |
| * @remark If flags contains APR_POLLSET_NOCOPY, then the apr_pollfd_t |
| * structures passed to apr_pollset_add() are not copied and |
| * must have a lifetime at least as long as the pollset. |
| * @remark Some poll methods (including APR_POLLSET_KQUEUE, |
| * APR_POLLSET_PORT, and APR_POLLSET_EPOLL) do not have a |
| * fixed limit on the size of the pollset. For these methods, |
| * the size parameter controls the maximum number of |
| * descriptors that will be returned by a single call to |
| * apr_pollset_poll(). |
| */ |
| APR_DECLARE(apr_status_t) apr_pollset_create_ex(apr_pollset_t **pollset, |
| apr_uint32_t size, |
| apr_pool_t *p, |
| apr_uint32_t flags, |
| apr_pollset_method_e method); |
| |
| /** |
| * Destroy a pollset object |
| * @param pollset The pollset to destroy |
| */ |
| APR_DECLARE(apr_status_t) apr_pollset_destroy(apr_pollset_t *pollset); |
| |
| /** |
| * Add a socket or file descriptor to a pollset |
| * @param pollset The pollset to which to add the descriptor |
| * @param descriptor The descriptor to add |
| * @remark If you set client_data in the descriptor, that value |
| * will be returned in the client_data field whenever this |
| * descriptor is signalled in apr_pollset_poll(). |
| * @remark If the pollset has been created with APR_POLLSET_THREADSAFE |
| * and thread T1 is blocked in a call to apr_pollset_poll() for |
| * this same pollset that is being modified via apr_pollset_add() |
| * in thread T2, the currently executing apr_pollset_poll() call in |
| * T1 will either: (1) automatically include the newly added descriptor |
| * in the set of descriptors it is watching or (2) return immediately |
| * with APR_EINTR. Option (1) is recommended, but option (2) is |
| * allowed for implementations where option (1) is impossible |
| * or impractical. |
| * @remark If the pollset has been created with APR_POLLSET_NOCOPY, the |
| * apr_pollfd_t structure referenced by descriptor will not be copied |
| * and must have a lifetime at least as long as the pollset. |
| * @remark Do not add the same socket or file descriptor to the same pollset |
| * multiple times, even if the requested events differ for the |
| * different calls to apr_pollset_add(). If the events of interest |
| * for a descriptor change, you must first remove the descriptor |
| * from the pollset with apr_pollset_remove(), then add it again |
| * specifying all requested events. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollset_add(apr_pollset_t *pollset, |
| const apr_pollfd_t *descriptor); |
| |
| /** |
| * Remove a descriptor from a pollset |
| * @param pollset The pollset from which to remove the descriptor |
| * @param descriptor The descriptor to remove |
| * @remark If the descriptor is not found, APR_NOTFOUND is returned. |
| * @remark If the pollset has been created with APR_POLLSET_THREADSAFE |
| * and thread T1 is blocked in a call to apr_pollset_poll() for |
| * this same pollset that is being modified via apr_pollset_remove() |
| * in thread T2, the currently executing apr_pollset_poll() call in |
| * T1 will either: (1) automatically exclude the newly added descriptor |
| * in the set of descriptors it is watching or (2) return immediately |
| * with APR_EINTR. Option (1) is recommended, but option (2) is |
| * allowed for implementations where option (1) is impossible |
| * or impractical. |
| * @remark apr_pollset_remove() cannot be used to remove a subset of requested |
| * events for a descriptor. The reqevents field in the apr_pollfd_t |
| * parameter must contain the same value when removing as when adding. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollset_remove(apr_pollset_t *pollset, |
| const apr_pollfd_t *descriptor); |
| |
| /** |
| * Block for activity on the descriptor(s) in a pollset |
| * @param pollset The pollset to use |
| * @param timeout The amount of time in microseconds to wait. This is a |
| * maximum, not a minimum. If a descriptor is signalled, the |
| * function will return before this time. If timeout is |
| * negative, the function will block until a descriptor is |
| * signalled or until apr_pollset_wakeup() has been called. |
| * @param num Number of signalled descriptors (output parameter) |
| * @param descriptors Array of signalled descriptors (output parameter) |
| * @remark APR_EINTR will be returned if the pollset has been created with |
| * APR_POLLSET_WAKEABLE, apr_pollset_wakeup() has been called while |
| * waiting for activity, and there were no signalled descriptors at the |
| * time of the wakeup call. |
| * @remark Multiple signalled conditions for the same descriptor may be reported |
| * in one or more returned apr_pollfd_t structures, depending on the |
| * implementation. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollset_poll(apr_pollset_t *pollset, |
| apr_interval_time_t timeout, |
| apr_int32_t *num, |
| const apr_pollfd_t **descriptors); |
| |
| /** |
| * Interrupt the blocked apr_pollset_poll() call. |
| * @param pollset The pollset to use |
| * @remark If the pollset was not created with APR_POLLSET_WAKEABLE the |
| * return value is APR_EINIT. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollset_wakeup(apr_pollset_t *pollset); |
| |
| /** |
| * Poll the descriptors in the poll structure |
| * @param aprset The poll structure we will be using. |
| * @param numsock The number of descriptors we are polling |
| * @param nsds The number of descriptors signalled (output parameter) |
| * @param timeout The amount of time in microseconds to wait. This is a |
| * maximum, not a minimum. If a descriptor is signalled, the |
| * function will return before this time. If timeout is |
| * negative, the function will block until a descriptor is |
| * signalled or until apr_pollset_wakeup() has been called. |
| * @remark The number of descriptors signalled is returned in the third argument. |
| * This is a blocking call, and it will not return until either a |
| * descriptor has been signalled or the timeout has expired. |
| * @remark The rtnevents field in the apr_pollfd_t array will only be filled- |
| * in if the return value is APR_SUCCESS. |
| */ |
| APR_DECLARE(apr_status_t) apr_poll(apr_pollfd_t *aprset, apr_int32_t numsock, |
| apr_int32_t *nsds, |
| apr_interval_time_t timeout); |
| |
| /** |
| * Return a printable representation of the pollset method. |
| * @param pollset The pollset to use |
| */ |
| APR_DECLARE(const char *) apr_pollset_method_name(apr_pollset_t *pollset); |
| |
| /** |
| * Return a printable representation of the default pollset method |
| * (APR_POLLSET_DEFAULT). |
| */ |
| APR_DECLARE(const char *) apr_poll_method_defname(void); |
| |
| /** Opaque structure used for pollcb API */ |
| typedef struct apr_pollcb_t apr_pollcb_t; |
| |
| /** |
| * Set up a pollcb object |
| * @param pollcb The pointer in which to return the newly created object |
| * @param size The maximum number of descriptors that a single _poll can return. |
| * @param p The pool from which to allocate the pollcb |
| * @param flags Optional flags to modify the operation of the pollcb. |
| * |
| * @remark If flags contains APR_POLLSET_WAKEABLE, then a pollcb is |
| * created with an additional internal pipe object used for the |
| * apr_pollcb_wakeup() call. The actual size of pollcb is |
| * in that case @a size + 1. |
| * @remark Pollcb is only supported on some platforms; the apr_pollcb_create() |
| * call will fail with APR_ENOTIMPL on platforms where it is not supported. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollcb_create(apr_pollcb_t **pollcb, |
| apr_uint32_t size, |
| apr_pool_t *p, |
| apr_uint32_t flags); |
| |
| /** |
| * Set up a pollcb object |
| * @param pollcb The pointer in which to return the newly created object |
| * @param size The maximum number of descriptors that a single _poll can return. |
| * @param p The pool from which to allocate the pollcb |
| * @param flags Optional flags to modify the operation of the pollcb. |
| * @param method Poll method to use. See #apr_pollset_method_e. If this |
| * method cannot be used, the default method will be used unless the |
| * APR_POLLSET_NODEFAULT flag has been specified. |
| * |
| * @remark If flags contains APR_POLLSET_WAKEABLE, then a pollcb is |
| * created with an additional internal pipe object used for the |
| * apr_pollcb_wakeup() call. The actual size of pollcb is |
| * in that case @a size + 1. |
| * @remark Pollcb is only supported on some platforms; the apr_pollcb_create_ex() |
| * call will fail with APR_ENOTIMPL on platforms where it is not supported. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollcb_create_ex(apr_pollcb_t **pollcb, |
| apr_uint32_t size, |
| apr_pool_t *p, |
| apr_uint32_t flags, |
| apr_pollset_method_e method); |
| |
| /** |
| * Add a socket or file descriptor to a pollcb |
| * @param pollcb The pollcb to which to add the descriptor |
| * @param descriptor The descriptor to add |
| * @remark If you set client_data in the descriptor, that value will be |
| * returned in the client_data field whenever this descriptor is |
| * signalled in apr_pollcb_poll(). |
| * @remark Unlike the apr_pollset API, the descriptor is not copied, and users |
| * must retain the memory used by descriptor, as the same pointer will |
| * be returned to them from apr_pollcb_poll. |
| * @remark Do not add the same socket or file descriptor to the same pollcb |
| * multiple times, even if the requested events differ for the |
| * different calls to apr_pollcb_add(). If the events of interest |
| * for a descriptor change, you must first remove the descriptor |
| * from the pollcb with apr_pollcb_remove(), then add it again |
| * specifying all requested events. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollcb_add(apr_pollcb_t *pollcb, |
| apr_pollfd_t *descriptor); |
| /** |
| * Remove a descriptor from a pollcb |
| * @param pollcb The pollcb from which to remove the descriptor |
| * @param descriptor The descriptor to remove |
| * @remark If the descriptor is not found, APR_NOTFOUND is returned. |
| * @remark apr_pollcb_remove() cannot be used to remove a subset of requested |
| * events for a descriptor. The reqevents field in the apr_pollfd_t |
| * parameter must contain the same value when removing as when adding. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollcb_remove(apr_pollcb_t *pollcb, |
| apr_pollfd_t *descriptor); |
| |
| /** |
| * Function prototype for pollcb handlers |
| * @param baton Opaque baton passed into apr_pollcb_poll() |
| * @param descriptor Contains the notification for an active descriptor. |
| * The @a rtnevents member describes which events were triggered |
| * for this descriptor. |
| * @remark If the pollcb handler does not return APR_SUCCESS, the apr_pollcb_poll() |
| * call returns with the handler's return value. |
| */ |
| typedef apr_status_t (*apr_pollcb_cb_t)(void *baton, apr_pollfd_t *descriptor); |
| |
| /** |
| * Block for activity on the descriptor(s) in a pollcb |
| * @param pollcb The pollcb to use |
| * @param timeout The amount of time in microseconds to wait. This is a |
| * maximum, not a minimum. If a descriptor is signalled, the |
| * function will return before this time. If timeout is |
| * negative, the function will block until a descriptor is |
| * signalled or until apr_pollcb_wakeup() has been called. |
| * @param func Callback function to call for each active descriptor. |
| * @param baton Opaque baton passed to the callback function. |
| * @remark Multiple signalled conditions for the same descriptor may be reported |
| * in one or more calls to the callback function, depending on the |
| * implementation. |
| * @remark APR_EINTR will be returned if the pollset has been created with |
| * APR_POLLSET_WAKEABLE and apr_pollcb_wakeup() has been called while |
| * waiting for activity. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollcb_poll(apr_pollcb_t *pollcb, |
| apr_interval_time_t timeout, |
| apr_pollcb_cb_t func, |
| void *baton); |
| |
| /** |
| * Interrupt the blocked apr_pollcb_poll() call. |
| * @param pollcb The pollcb to use |
| * @remark If the pollcb was not created with APR_POLLSET_WAKEABLE the |
| * return value is APR_EINIT. |
| */ |
| APR_DECLARE(apr_status_t) apr_pollcb_wakeup(apr_pollcb_t *pollcb); |
| |
| /** |
| * Return a printable representation of the pollcb method. |
| * @param pollcb The pollcb to use |
| */ |
| APR_DECLARE(const char *) apr_pollcb_method_name(apr_pollcb_t *pollcb); |
| |
| /** @} */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* ! APR_POLL_H */ |
| |