| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "apu.h" |
| |
| #include "apu_config.h" |
| #include "apu_errno.h" |
| |
| #include <ctype.h> |
| #include <stdlib.h> |
| |
| #include "apr_strings.h" |
| #include "apr_time.h" |
| #include "apr_buckets.h" |
| |
| #include "apr_crypto_internal.h" |
| |
| #if APU_HAVE_CRYPTO |
| |
| #include <prerror.h> |
| |
| #ifdef HAVE_NSS_NSS_H |
| #include <nss/nss.h> |
| #endif |
| #ifdef HAVE_NSS_H |
| #include <nss.h> |
| #endif |
| |
| #ifdef HAVE_NSS_PK11PUB_H |
| #include <nss/pk11pub.h> |
| #endif |
| #ifdef HAVE_PK11PUB_H |
| #include <pk11pub.h> |
| #endif |
| |
| struct apr_crypto_config_t { |
| }; |
| |
| struct apr_crypto_key_t { |
| CK_MECHANISM_TYPE cipherMech; |
| SECOidTag cipherOid; |
| PK11SymKey *symKey; |
| int ivSize; |
| }; |
| |
| struct apr_crypto_block_t { |
| const apr_crypto_t *factory; |
| apr_pool_t *pool; |
| PK11Context *ctx; |
| apr_crypto_key_t *key; |
| int blockSize; |
| }; |
| |
| |
| /** |
| * Shutdown the crypto library and release resources. |
| * |
| * It is safe to shut down twice. |
| */ |
| static apr_status_t crypto_shutdown(apr_pool_t *pool) |
| { |
| if (NSS_IsInitialized()) { |
| SECStatus s = NSS_Shutdown(); |
| if (s != SECSuccess) { |
| return APR_EINIT; |
| } |
| } |
| return APR_SUCCESS; |
| } |
| |
| static apr_status_t crypto_shutdown_helper(void *data) |
| { |
| apr_pool_t *pool = (apr_pool_t *) data; |
| return crypto_shutdown(pool); |
| } |
| |
| /** |
| * Initialise the crypto library and perform one time initialisation. |
| */ |
| static apr_status_t crypto_init(apr_pool_t *pool, const apr_array_header_t *params, int *rc) |
| { |
| SECStatus s; |
| const char *dir = NULL; |
| const char *keyPrefix = NULL; |
| const char *certPrefix = NULL; |
| const char *secmod = NULL; |
| PRUint32 flags = 0; |
| struct apr_crypto_param_t *ents = params ? (struct apr_crypto_param_t *)params->elts : NULL; |
| int i = 0; |
| |
| /* sanity check - we can only initialise NSS once */ |
| if (NSS_IsInitialized()) { |
| return APR_EREINIT; |
| } |
| |
| apr_pool_cleanup_register(pool, pool, |
| crypto_shutdown_helper, |
| apr_pool_cleanup_null); |
| |
| for (i = 0; params && i < params->nelts; i++) { |
| switch (ents[i].type) { |
| case APR_CRYPTO_CA_TYPE_DIR: |
| dir = ents[i].path; |
| break; |
| case APR_CRYPTO_CERT_TYPE_KEY3_DB: |
| keyPrefix = ents[i].path; |
| break; |
| case APR_CRYPTO_CA_TYPE_CERT7_DB: |
| certPrefix = ents[i].path; |
| break; |
| case APR_CRYPTO_CA_TYPE_SECMOD: |
| secmod = ents[i].path; |
| break; |
| default: |
| return APR_EINIT; |
| } |
| } |
| |
| if (keyPrefix || certPrefix || secmod) { |
| s = NSS_Initialize(dir, certPrefix, keyPrefix, secmod, flags); |
| } |
| else if (dir) { |
| s = NSS_InitReadWrite(dir); |
| } |
| else { |
| s = NSS_NoDB_Init(NULL); |
| } |
| if (s != SECSuccess) { |
| if (rc) { |
| *rc = PR_GetError(); |
| } |
| return APR_ECRYPT; |
| } |
| |
| return APR_SUCCESS; |
| |
| } |
| |
| /** |
| * @brief Clean encryption / decryption context. |
| * @note After cleanup, a context is free to be reused if necessary. |
| * @param driver - driver to use |
| * @param ctx The block context to use. |
| * @return Returns APR_ENOTIMPL if not supported. |
| */ |
| static apr_status_t crypto_block_cleanup(apr_crypto_block_t *block) |
| { |
| |
| if (block->ctx) { |
| PK11_DestroyContext(block->ctx, PR_TRUE); |
| block->ctx = NULL; |
| } |
| |
| return APR_SUCCESS; |
| |
| } |
| |
| static apr_status_t crypto_block_cleanup_helper(void *data) |
| { |
| apr_crypto_block_t *block = (apr_crypto_block_t *) data; |
| return crypto_block_cleanup(block); |
| } |
| |
| /** |
| * @brief Clean encryption / decryption factory. |
| * @note After cleanup, a factory is free to be reused if necessary. |
| * @param driver - driver to use |
| * @param f The factory to use. |
| * @return Returns APR_ENOTIMPL if not supported. |
| */ |
| static apr_status_t crypto_cleanup(apr_crypto_t *f) |
| { |
| apr_crypto_key_t *key; |
| if (f->keys) { |
| while ((key = apr_array_pop(f->keys))) { |
| if (key->symKey) { |
| PK11_FreeSymKey(key->symKey); |
| key->symKey = NULL; |
| } |
| } |
| } |
| return APR_SUCCESS; |
| } |
| |
| static apr_status_t crypto_cleanup_helper(void *data) |
| { |
| apr_crypto_t *f = (apr_crypto_t *) data; |
| return crypto_cleanup(f); |
| } |
| |
| /** |
| * @brief Create a context for supporting encryption. Keys, certificates, |
| * algorithms and other parameters will be set per context. More than |
| * one context can be created at one time. A cleanup will be automatically |
| * registered with the given pool to guarantee a graceful shutdown. |
| * @param driver - driver to use |
| * @param pool - process pool |
| * @param params - array of key parameters |
| * @param factory - factory pointer will be written here |
| * @return APR_ENOENGINE when the engine specified does not exist. APR_EINITENGINE |
| * if the engine cannot be initialised. |
| */ |
| static apr_status_t crypto_factory(apr_pool_t *pool, |
| const apr_array_header_t *params, |
| apr_crypto_t **factory) |
| { |
| apr_crypto_config_t *config = NULL; |
| /* struct apr_crypto_param_t *ents = params ? (struct apr_crypto_param_t *)params->elts : NULL; */ |
| /* int i = 0; */ |
| apr_crypto_t *f; |
| |
| f = apr_pcalloc(pool, sizeof(apr_crypto_t)); |
| if (!f) { |
| return APR_ENOMEM; |
| } |
| *factory = f; |
| f->pool = pool; |
| config = f->config = apr_pcalloc(pool, sizeof(apr_crypto_config_t)); |
| if (!config) { |
| return APR_ENOMEM; |
| } |
| f->result = apr_pcalloc(pool, sizeof(apu_err_t)); |
| if (!f->result) { |
| return APR_ENOMEM; |
| } |
| f->keys = apr_array_make(pool, |
| 10, sizeof(apr_crypto_key_t)); |
| |
| apr_pool_cleanup_register(pool, f, |
| crypto_cleanup_helper, |
| apr_pool_cleanup_null); |
| |
| /* |
| for (i = 0; params && i < params->nelts; i++) { |
| switch (ents[i].type) { |
| default: |
| f->result->rc = -1; |
| f->result->reason = "The NSS module currently supports " |
| "no per factory initialisation parameters at this time, but " |
| "may do in future."; |
| return APR_EINIT; |
| } |
| } |
| */ |
| |
| return APR_SUCCESS; |
| |
| } |
| |
| /** |
| * @brief Create a key from the given passphrase. By default, the PBKDF2 |
| * algorithm is used to generate the key from the passphrase. It is expected |
| * that the same pass phrase will generate the same key, regardless of the |
| * backend crypto platform used. The key is cleaned up when the context |
| * is cleaned, and may be reused with multiple encryption or decryption |
| * operations. |
| * @note If *key is NULL, a apr_crypto_key_t will be created from a pool. If |
| * *key is not NULL, *key must point at a previously created structure. |
| * @param driver - driver to use |
| * @param p The pool to use. |
| * @param f The context to use. |
| * @param pass The passphrase to use. |
| * @param passLen The passphrase length in bytes |
| * @param salt The salt to use. |
| * @param saltLen The salt length in bytes |
| * @param type 3DES_192, AES_128, AES_192, AES_256. |
| * @param mode Electronic Code Book / Cipher Block Chaining. |
| * @param doPad Pad if necessary. |
| * @param key The key returned, see note. |
| * @param ivSize The size of the initialisation vector will be returned, based |
| * on whether an IV is relevant for this type of crypto. |
| * @return Returns APR_ENOKEY if the pass phrase is missing or empty, or if a backend |
| * error occurred while generating the key. APR_ENOCIPHER if the type or mode |
| * is not supported by the particular backend. APR_EKEYTYPE if the key type is |
| * not known. APR_EPADDING if padding was requested but is not supported. |
| * APR_ENOTIMPL if not implemented. |
| */ |
| static apr_status_t crypto_passphrase(apr_pool_t *p, |
| const apr_crypto_t *f, |
| const char *pass, |
| apr_size_t passLen, |
| const unsigned char * salt, |
| apr_size_t saltLen, |
| const apr_crypto_block_key_type_e type, |
| const apr_crypto_block_key_mode_e mode, |
| const int doPad, |
| const int iterations, |
| apr_crypto_key_t **k, |
| apr_size_t *ivSize) |
| { |
| apr_status_t rv = APR_SUCCESS; |
| PK11SlotInfo * slot; |
| SECItem passItem; |
| SECItem saltItem; |
| SECAlgorithmID *algid; |
| void *wincx = NULL; /* what is wincx? */ |
| apr_crypto_key_t *key = *k; |
| |
| if (!key) { |
| *k = key = apr_array_push(f->keys); |
| } |
| if (!key) { |
| return APR_ENOMEM; |
| } |
| |
| /* decide on what cipher mechanism we will be using */ |
| switch (type) { |
| |
| case (KEY_3DES_192) : |
| if (MODE_CBC == mode) { |
| key->cipherOid = SEC_OID_DES_EDE3_CBC; |
| } |
| else if (MODE_ECB == mode) { |
| return APR_ENOCIPHER; |
| /* No OID for CKM_DES3_ECB; */ |
| } |
| break; |
| case (KEY_AES_128) : |
| if (MODE_CBC == mode) { |
| key->cipherOid = SEC_OID_AES_128_CBC; |
| } |
| else { |
| key->cipherOid = SEC_OID_AES_128_ECB; |
| } |
| break; |
| case (KEY_AES_192) : |
| if (MODE_CBC == mode) { |
| key->cipherOid = SEC_OID_AES_192_CBC; |
| } |
| else { |
| key->cipherOid = SEC_OID_AES_192_ECB; |
| } |
| break; |
| case (KEY_AES_256) : |
| if (MODE_CBC == mode) { |
| key->cipherOid = SEC_OID_AES_256_CBC; |
| } |
| else { |
| key->cipherOid = SEC_OID_AES_256_ECB; |
| } |
| break; |
| default: |
| /* unknown key type, give up */ |
| return APR_EKEYTYPE; |
| } |
| |
| /* AES_128_CBC --> CKM_AES_CBC --> CKM_AES_CBC_PAD */ |
| key->cipherMech = PK11_AlgtagToMechanism(key->cipherOid); |
| if (key->cipherMech == CKM_INVALID_MECHANISM) { |
| return APR_ENOCIPHER; |
| } |
| if (doPad) { |
| CK_MECHANISM_TYPE paddedMech; |
| paddedMech = PK11_GetPadMechanism(key->cipherMech); |
| if (CKM_INVALID_MECHANISM == paddedMech || key->cipherMech == paddedMech) { |
| return APR_EPADDING; |
| } |
| key->cipherMech = paddedMech; |
| } |
| |
| /* Turn the raw passphrase and salt into SECItems */ |
| passItem.data = (unsigned char*)pass; |
| passItem.len = passLen; |
| saltItem.data = (unsigned char*)salt; |
| saltItem.len = saltLen; |
| |
| /* generate the key */ |
| /* pbeAlg and cipherAlg are the same. NSS decides the keylength. */ |
| algid = PK11_CreatePBEV2AlgorithmID(key->cipherOid, key->cipherOid, SEC_OID_HMAC_SHA1, 0, iterations, &saltItem); |
| if (algid) { |
| slot = PK11_GetBestSlot(key->cipherMech, wincx); |
| if (slot) { |
| key->symKey = PK11_PBEKeyGen(slot, algid, &passItem, PR_FALSE, wincx); |
| PK11_FreeSlot(slot); |
| } |
| SECOID_DestroyAlgorithmID(algid, PR_TRUE); |
| } |
| |
| /* sanity check? */ |
| if (!key->symKey) { |
| PRErrorCode perr = PORT_GetError(); |
| if (perr) { |
| f->result->rc = perr; |
| f->result->msg = PR_ErrorToName(perr); |
| rv = APR_ENOKEY; |
| } |
| } |
| |
| key->ivSize = PK11_GetIVLength(key->cipherMech); |
| if (ivSize) { |
| *ivSize = key->ivSize; |
| } |
| |
| return rv; |
| } |
| |
| /** |
| * @brief Initialise a context for encrypting arbitrary data using the given key. |
| * @note If *ctx is NULL, a apr_crypto_block_t will be created from a pool. If |
| * *ctx is not NULL, *ctx must point at a previously created structure. |
| * @param p The pool to use. |
| * @param f The block factory to use. |
| * @param key The key structure. |
| * @param iv Optional initialisation vector. If the buffer pointed to is NULL, |
| * an IV will be created at random, in space allocated from the pool. |
| * If the buffer pointed to is not NULL, the IV in the buffer will be |
| * used. |
| * @param ctx The block context returned, see note. |
| * @param blockSize The block size of the cipher. |
| * @return Returns APR_ENOIV if an initialisation vector is required but not specified. |
| * Returns APR_EINIT if the backend failed to initialise the context. Returns |
| * APR_ENOTIMPL if not implemented. |
| */ |
| static apr_status_t crypto_block_encrypt_init(apr_pool_t *p, |
| const apr_crypto_t *f, |
| const apr_crypto_key_t *key, |
| const unsigned char **iv, |
| apr_crypto_block_t **ctx, |
| apr_size_t *blockSize) |
| { |
| PRErrorCode perr; |
| SECItem * secParam; |
| SECItem ivItem; |
| unsigned char * usedIv; |
| apr_crypto_block_t *block = *ctx; |
| if (!block) { |
| *ctx = block = apr_pcalloc(p, sizeof(apr_crypto_block_t)); |
| } |
| if (!block) { |
| return APR_ENOMEM; |
| } |
| block->factory = f; |
| block->pool = p; |
| |
| apr_pool_cleanup_register(p, block, |
| crypto_block_cleanup_helper, |
| apr_pool_cleanup_null); |
| |
| if (key->ivSize) { |
| if (iv == NULL) { |
| return APR_ENOIV; |
| } |
| if (*iv == NULL) { |
| usedIv = apr_pcalloc(p, key->ivSize); |
| if (!usedIv) { |
| return APR_ENOMEM; |
| } |
| SECStatus s = PK11_GenerateRandom(usedIv, key->ivSize); |
| if (s != SECSuccess) { |
| return APR_ENOIV; |
| } |
| *iv = usedIv; |
| } |
| else { |
| usedIv = (unsigned char *)*iv; |
| } |
| ivItem.data = usedIv; |
| ivItem.len = key->ivSize; |
| secParam = PK11_ParamFromIV(key->cipherMech, &ivItem); |
| } |
| else { |
| secParam = PK11_GenerateNewParam(key->cipherMech, key->symKey); |
| } |
| block->blockSize = PK11_GetBlockSize(key->cipherMech, secParam); |
| block->ctx = PK11_CreateContextBySymKey(key->cipherMech, CKA_ENCRYPT, key->symKey, secParam); |
| |
| /* did an error occur? */ |
| perr = PORT_GetError(); |
| if (perr || !block->ctx) { |
| f->result->rc = perr; |
| f->result->msg = PR_ErrorToName(perr); |
| return APR_EINIT; |
| } |
| |
| if (blockSize) { |
| *blockSize = PK11_GetBlockSize(key->cipherMech, secParam); |
| } |
| |
| return APR_SUCCESS; |
| |
| } |
| |
| /** |
| * @brief Encrypt data provided by in, write it to out. |
| * @note The number of bytes written will be written to outlen. If |
| * out is NULL, outlen will contain the maximum size of the |
| * buffer needed to hold the data, including any data |
| * generated by apr_crypto_block_encrypt_finish below. If *out points |
| * to NULL, a buffer sufficiently large will be created from |
| * the pool provided. If *out points to a not-NULL value, this |
| * value will be used as a buffer instead. |
| * @param ctx The block context to use. |
| * @param out Address of a buffer to which data will be written, |
| * see note. |
| * @param outlen Length of the output will be written here. |
| * @param in Address of the buffer to read. |
| * @param inlen Length of the buffer to read. |
| * @return APR_ECRYPT if an error occurred. Returns APR_ENOTIMPL if |
| * not implemented. |
| */ |
| static apr_status_t crypto_block_encrypt(apr_crypto_block_t *block, |
| unsigned char **out, |
| apr_size_t *outlen, |
| const unsigned char *in, |
| apr_size_t inlen) |
| { |
| |
| unsigned char *buffer; |
| int outl = (int) *outlen; |
| if (!out) { |
| *outlen = inlen + block->blockSize; |
| return APR_SUCCESS; |
| } |
| if (!*out) { |
| buffer = apr_palloc(block->pool, inlen + block->blockSize); |
| if (!buffer) { |
| return APR_ENOMEM; |
| } |
| *out = buffer; |
| } |
| |
| SECStatus s = PK11_CipherOp(block->ctx, *out, &outl, inlen, (unsigned char*)in, inlen); |
| if (s != SECSuccess) { |
| PRErrorCode perr = PORT_GetError(); |
| if (perr) { |
| block->factory->result->rc = perr; |
| block->factory->result->msg = PR_ErrorToName(perr); |
| } |
| return APR_ECRYPT; |
| } |
| *outlen = outl; |
| |
| return APR_SUCCESS; |
| |
| } |
| |
| /** |
| * @brief Encrypt final data block, write it to out. |
| * @note If necessary the final block will be written out after being |
| * padded. Typically the final block will be written to the |
| * same buffer used by apr_crypto_block_encrypt, offset by the |
| * number of bytes returned as actually written by the |
| * apr_crypto_block_encrypt() call. After this call, the context |
| * is cleaned and can be reused by apr_crypto_block_encrypt_init(). |
| * @param ctx The block context to use. |
| * @param out Address of a buffer to which data will be written. This |
| * buffer must already exist, and is usually the same |
| * buffer used by apr_evp_crypt(). See note. |
| * @param outlen Length of the output will be written here. |
| * @return APR_ECRYPT if an error occurred. |
| * @return APR_EPADDING if padding was enabled and the block was incorrectly |
| * formatted. |
| * @return APR_ENOTIMPL if not implemented. |
| */ |
| static apr_status_t crypto_block_encrypt_finish(apr_crypto_block_t *block, |
| unsigned char *out, |
| apr_size_t *outlen) |
| { |
| |
| apr_status_t rv = APR_SUCCESS; |
| unsigned int outl = *outlen; |
| |
| SECStatus s = PK11_DigestFinal(block->ctx, out, &outl, block->blockSize); |
| *outlen = outl; |
| |
| if (s != SECSuccess) { |
| PRErrorCode perr = PORT_GetError(); |
| if (perr) { |
| block->factory->result->rc = perr; |
| block->factory->result->msg = PR_ErrorToName(perr); |
| } |
| rv = APR_ECRYPT; |
| } |
| crypto_block_cleanup(block); |
| |
| return rv; |
| |
| } |
| |
| /** |
| * @brief Initialise a context for decrypting arbitrary data using the given key. |
| * @note If *ctx is NULL, a apr_crypto_block_t will be created from a pool. If |
| * *ctx is not NULL, *ctx must point at a previously created structure. |
| * @param p The pool to use. |
| * @param f The block factory to use. |
| * @param key The key structure. |
| * @param iv Optional initialisation vector. If the buffer pointed to is NULL, |
| * an IV will be created at random, in space allocated from the pool. |
| * If the buffer pointed to is not NULL, the IV in the buffer will be |
| * used. |
| * @param ctx The block context returned, see note. |
| * @param blockSize The block size of the cipher. |
| * @return Returns APR_ENOIV if an initialisation vector is required but not specified. |
| * Returns APR_EINIT if the backend failed to initialise the context. Returns |
| * APR_ENOTIMPL if not implemented. |
| */ |
| static apr_status_t crypto_block_decrypt_init(apr_pool_t *p, |
| const apr_crypto_t *f, |
| const apr_crypto_key_t *key, |
| const unsigned char *iv, |
| apr_crypto_block_t **ctx, |
| apr_size_t *blockSize) |
| { |
| PRErrorCode perr; |
| SECItem * secParam; |
| apr_crypto_block_t *block = *ctx; |
| if (!block) { |
| *ctx = block = apr_pcalloc(p, sizeof(apr_crypto_block_t)); |
| } |
| if (!block) { |
| return APR_ENOMEM; |
| } |
| block->factory = f; |
| block->pool = p; |
| |
| apr_pool_cleanup_register(p, block, |
| crypto_block_cleanup_helper, |
| apr_pool_cleanup_null); |
| |
| if (key->ivSize) { |
| SECItem ivItem; |
| if (iv == NULL) { |
| return APR_ENOIV; /* Cannot initialise without an IV */ |
| } |
| ivItem.data = (unsigned char*)iv; |
| ivItem.len = key->ivSize; |
| secParam = PK11_ParamFromIV(key->cipherMech, &ivItem); |
| } |
| else { |
| secParam = PK11_GenerateNewParam(key->cipherMech, key->symKey); |
| } |
| block->blockSize = PK11_GetBlockSize(key->cipherMech, secParam); |
| block->ctx = PK11_CreateContextBySymKey(key->cipherMech, CKA_DECRYPT, key->symKey, secParam); |
| |
| /* did an error occur? */ |
| perr = PORT_GetError(); |
| if (perr || !block->ctx) { |
| f->result->rc = perr; |
| f->result->msg = PR_ErrorToName(perr); |
| return APR_EINIT; |
| } |
| |
| if (blockSize) { |
| *blockSize = PK11_GetBlockSize(key->cipherMech, secParam); |
| } |
| |
| return APR_SUCCESS; |
| |
| } |
| |
| /** |
| * @brief Decrypt data provided by in, write it to out. |
| * @note The number of bytes written will be written to outlen. If |
| * out is NULL, outlen will contain the maximum size of the |
| * buffer needed to hold the data, including any data |
| * generated by apr_crypto_block_final below. If *out points |
| * to NULL, a buffer sufficiently large will be created from |
| * the pool provided. If *out points to a not-NULL value, this |
| * value will be used as a buffer instead. |
| * @param ctx The block context to use. |
| * @param out Address of a buffer to which data will be written, |
| * see note. |
| * @param outlen Length of the output will be written here. |
| * @param in Address of the buffer to read. |
| * @param inlen Length of the buffer to read. |
| * @return APR_ECRYPT if an error occurred. Returns APR_ENOTIMPL if |
| * not implemented. |
| */ |
| static apr_status_t crypto_block_decrypt(apr_crypto_block_t *block, |
| unsigned char **out, |
| apr_size_t *outlen, |
| const unsigned char *in, |
| apr_size_t inlen) |
| { |
| |
| unsigned char *buffer; |
| int outl = (int) *outlen; |
| if (!out) { |
| *outlen = inlen + block->blockSize; |
| return APR_SUCCESS; |
| } |
| if (!*out) { |
| buffer = apr_palloc(block->pool, inlen + block->blockSize); |
| if (!buffer) { |
| return APR_ENOMEM; |
| } |
| *out = buffer; |
| } |
| |
| SECStatus s = PK11_CipherOp(block->ctx, *out, &outl, inlen, (unsigned char*)in, inlen); |
| if (s != SECSuccess) { |
| PRErrorCode perr = PORT_GetError(); |
| if (perr) { |
| block->factory->result->rc = perr; |
| block->factory->result->msg = PR_ErrorToName(perr); |
| } |
| return APR_ECRYPT; |
| } |
| *outlen = outl; |
| |
| return APR_SUCCESS; |
| |
| } |
| |
| /** |
| * @brief Encrypt final data block, write it to out. |
| * @note If necessary the final block will be written out after being |
| * padded. Typically the final block will be written to the |
| * same buffer used by apr_evp_crypt, offset by the number of |
| * bytes returned as actually written by the apr_evp_crypt() |
| * call. After this call, the context is cleaned and can be |
| * reused by apr_env_encrypt_init() or apr_env_decrypt_init(). |
| * @param ctx The block context to use. |
| * @param out Address of a buffer to which data will be written. This |
| * buffer must already exist, and is usually the same |
| * buffer used by apr_evp_crypt(). See note. |
| * @param outlen Length of the output will be written here. |
| * @return APR_ECRYPT if an error occurred. |
| * @return APR_EPADDING if padding was enabled and the block was incorrectly |
| * formatted. |
| * @return APR_ENOTIMPL if not implemented. |
| */ |
| static apr_status_t crypto_block_decrypt_finish(apr_crypto_block_t *block, |
| unsigned char *out, |
| apr_size_t *outlen) |
| { |
| |
| apr_status_t rv = APR_SUCCESS; |
| unsigned int outl = *outlen; |
| |
| SECStatus s = PK11_DigestFinal(block->ctx, out, &outl, block->blockSize); |
| *outlen = outl; |
| |
| if (s != SECSuccess) { |
| PRErrorCode perr = PORT_GetError(); |
| if (perr) { |
| block->factory->result->rc = perr; |
| block->factory->result->msg = PR_ErrorToName(perr); |
| } |
| rv = APR_ECRYPT; |
| } |
| crypto_block_cleanup(block); |
| |
| return rv; |
| |
| } |
| |
| /** |
| * OpenSSL module. |
| */ |
| APU_MODULE_DECLARE_DATA const apr_crypto_driver_t apr_crypto_nss_driver = { |
| "nss", |
| crypto_init, |
| crypto_factory, |
| crypto_passphrase, |
| crypto_block_encrypt_init, |
| crypto_block_encrypt, |
| crypto_block_encrypt_finish, |
| crypto_block_decrypt_init, |
| crypto_block_decrypt, |
| crypto_block_decrypt_finish, |
| crypto_block_cleanup, |
| crypto_cleanup, |
| crypto_shutdown |
| }; |
| |
| #endif |