| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| BEGIN { |
| if ($ENV{TEST_NGINX_CHECK_LEAK}) { |
| $SkipReason = "unavailable for the hup tests"; |
| |
| } else { |
| $ENV{TEST_NGINX_USE_HUP} = 1; |
| undef $ENV{TEST_NGINX_USE_STAP}; |
| } |
| } |
| |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| no_long_string(); |
| no_shuffle(); |
| no_root_location(); |
| |
| add_block_preprocessor(sub { |
| my ($block) = @_; |
| |
| if (!$block->request) { |
| $block->set_value("request", "GET /t"); |
| } |
| |
| if (!$block->error_log && !$block->no_error_log) { |
| $block->set_value("no_error_log", "[error]\n[alert]"); |
| } |
| }); |
| |
| run_tests; |
| |
| __DATA__ |
| |
| === TEST 1: sanity |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.limit-count") |
| local ok, err = plugin.check_schema({count = 2, time_window = 60, rejected_code = 503, key = 'remote_addr'}) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- response_body |
| done |
| |
| |
| |
| === TEST 2: set key empty |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.limit-count") |
| local ok, err = plugin.check_schema({count = 2, time_window = 60, rejected_code = 503}) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- response_body |
| done |
| |
| |
| |
| === TEST 3: set route(id: 1) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 4: up the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 503] |
| |
| |
| |
| === TEST 5: up the limit |
| --- pipelined_requests eval |
| ["GET /hello1", "GET /hello", "GET /hello2", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [404, 503, 404, 503, 503] |
| |
| |
| |
| === TEST 6: set route(id: 1) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 3, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 7: up the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 503] |
| |
| |
| |
| === TEST 8: invalid route: missing count |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "time_window": 60, |
| "rejected_code": 503 |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin limit-count err: property \"count\" is required"} |
| |
| |
| |
| === TEST 9: invalid route: wrong count |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "count": -100, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin limit-count err: property \"count\" validation failed: expected -100 to be greater than 0"} |
| |
| |
| |
| === TEST 10: invalid route: wrong count + POST method |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes', |
| ngx.HTTP_POST, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "count": -100, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin limit-count err: property \"count\" validation failed: expected -100 to be greater than 0"} |
| |
| |
| |
| === TEST 11: invalid service: missing count |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/services/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "time_window": 60, |
| "rejected_code": 503 |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin limit-count err: property \"count\" is required"} |
| |
| |
| |
| === TEST 12: invalid service: wrong count |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/services/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "count": -100, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin limit-count err: property \"count\" validation failed: expected -100 to be greater than 0"} |
| |
| |
| |
| === TEST 13: invalid service: wrong count + POST method |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/services', |
| ngx.HTTP_POST, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "count": -100, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin limit-count err: property \"count\" validation failed: expected -100 to be greater than 0"} |
| |
| |
| |
| === TEST 14: set route without id in post body |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 61, |
| "rejected_code": 503, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 15: up the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 503] |
| |
| |
| |
| === TEST 16: disable plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 17: up the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 200] |
| |
| |
| |
| === TEST 18: set route(key: server_addr) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "server_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 19: up the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 503] |
| |
| |
| |
| === TEST 20: default rejected_code |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 80, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 21: when the count is changed, check the limit is correct |
| --- config |
| location /t1 { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 1, |
| "time_window": 80, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello","GET /hello","GET /t1", "GET /hello","GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 200, 200, 503] |
| |
| |
| |
| === TEST 22: when the count is changed, check the limit is correct(from 1 to 2) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 82, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| location /t1 { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 1, |
| "time_window": 82, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- pipelined_requests eval |
| ["GET /t1", "GET /hello", "GET /hello", "GET /t", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 200, 200, 200, 503] |
| |
| |
| |
| === TEST 23: when the count is changed, check the limit is correct(from 2 to 2) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 83, |
| "key": "remote_addr" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- pipelined_requests eval |
| ["GET /t", "GET /hello", "GET /hello", "GET /hello", "GET /t", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 503, 200, 503, 503, 503] |
| |
| |
| |
| === TEST 24: create consumer and bind key-auth plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/consumers', |
| ngx.HTTP_PUT, |
| [[{ |
| "username": "consumer_jack", |
| "plugins": { |
| "key-auth": { |
| "key": "auth-jack" |
| } |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 25: create route and consumer_name is consumer_jack |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "key-auth": {}, |
| "limit-count": { |
| "count": 2, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "consumer_name" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 26: up the limit |
| --- more_headers |
| apikey: auth-jack |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 503] |
| |
| |
| |
| === TEST 27: set service(id: 1) and binding limit-count plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/services/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "service_id" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 28: set route(id: 1) and bind service |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello", |
| "service_id": 1 |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 29: the number of requests exceeds the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 503] |
| |
| |
| |
| === TEST 30: set service(id: 1), and no limit-count plugin configured |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/services/1', |
| ngx.HTTP_PUT, |
| [[{}]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 31: set route(id: 1) and bind service |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 91, |
| "rejected_code": 503, |
| "key": "service_id" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello", |
| "service_id": 1 |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 32: the number of requests exceeds the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 503] |
| |
| |
| |
| === TEST 33: delete route(id: 1) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', ngx.HTTP_DELETE) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 34: delete service(id: 1) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/services/1', ngx.HTTP_DELETE) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 35: use 'remote_addr' as default key |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "plugins": { |
| "limit-count": { |
| "count": 2, |
| "time_window": 95, |
| "rejected_code": 503 |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 36: up the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 503, 503] |
| |
| |
| |
| === TEST 37: add service and route, upstream is the domain name |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/services/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-count": { |
| "count": 3, |
| "time_window": 60, |
| "rejected_code": 503 |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "test.com:1980": 1, |
| "foo.com:1981": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| end |
| |
| code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "uri": "/hello", |
| "service_id": 1 |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 38: normal, the result is as expected |
| --- init_by_lua_block |
| require "resty.core" |
| apisix = require("apisix") |
| core = require("apisix.core") |
| apisix.http_init() |
| |
| local utils = require("apisix.core.utils") |
| utils.dns_parse = function (domain) -- mock: DNS parser |
| if domain == "test.com" then |
| return {address = "127.0.0.1"} |
| end |
| |
| if domain == "foo.com" then |
| return {address = "127.0.0.1"} |
| end |
| |
| error("unknown domain: " .. domain) |
| end |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 503, 503] |
| |
| |
| |
| === TEST 39: plugin is bound to the route and upstream is the domain name |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "uri": "/hello", |
| "plugins": { |
| "limit-count": { |
| "count": 3, |
| "time_window": 99, |
| "rejected_code": 503 |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "test.com:1980": 1, |
| "foo.com:1981": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 40: normal, the result is as expected |
| --- init_by_lua_block |
| require "resty.core" |
| apisix = require("apisix") |
| core = require("apisix.core") |
| apisix.http_init() |
| |
| local utils = require("apisix.core.utils") |
| utils.dns_parse = function (domain) -- mock: DNS parser |
| if domain == "test.com" then |
| return {address = "127.0.0.1"} |
| end |
| |
| if domain == "foo.com" then |
| return {address = "127.0.0.1"} |
| end |
| |
| error("unknown domain: " .. domain) |
| end |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 503, 503] |
| |
| |
| |
| === TEST 41: check_schema failed (the `count` attribute is equal to 0) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.limit-count") |
| local ok, err = plugin.check_schema({count = 0, time_window = 60, rejected_code = 503, key = 'remote_addr'}) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- response_body eval |
| qr/property \"count\" validation failed: expected 0 to be greater than 0/ |
| |
| |
| |
| === TEST 42: check_schema failed (the `time_window` attribute is equal to 0) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.limit-count") |
| local ok, err = plugin.check_schema({count = 2, time_window = 0, rejected_code = 503, key = 'remote_addr'}) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- response_body eval |
| qr/property \"time_window\" validation failed: expected 0 to be greater than 0/ |
