| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| BEGIN { |
| if ($ENV{TEST_NGINX_CHECK_LEAK}) { |
| $SkipReason = "unavailable for the hup tests"; |
| |
| } else { |
| $ENV{TEST_NGINX_USE_HUP} = 1; |
| undef $ENV{TEST_NGINX_USE_STAP}; |
| } |
| } |
| |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| no_long_string(); |
| no_shuffle(); |
| no_root_location(); |
| log_level('info'); |
| run_tests; |
| |
| __DATA__ |
| |
| === TEST 1: set route(invalid http_status in the abort property) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 100, |
| "body": "Fault Injection!\n" |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/validation failed/ |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 2: set route(without http_status in the abort property) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/validation failed/ |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 3: set route(without abort & delay properties) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/expect object to have at least 1 properties/ |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 4: set route(without duration in the delay property) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "delay": { |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/validation failed/ |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 5: set route(invalid duration with string in the delay property) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "delay": { |
| "duration": "test" |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/wrong type: expected number, got string/ |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 6: set route(invalid duration with double dot in the delay property) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "delay": { |
| "duration": 0.1.1 |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/invalid request body/ |
| --- error_log eval |
| qr/invalid request body/ |
| |
| |
| |
| === TEST 7: set route(invalid duration with whitespace in the delay property) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "delay": { |
| "duration": 0. 1 |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/invalid request body/ |
| --- error_log eval |
| qr/invalid request body/ |
| |
| |
| |
| === TEST 8: set route(invalid vars in the delay property) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "delay": { |
| "duration": 0.1, |
| "vars": { |
| "a", |
| "b" |
| } |
| }, |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/invalid request body/ |
| --- error_log eval |
| qr/invalid request body/ |
| |
| |
| |
| === TEST 9: set route(invalid vars in in the abort property) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 200, |
| "vars": { |
| "a", |
| "b" |
| } |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body eval |
| qr/invalid request body/ |
| --- error_log eval |
| qr/invalid request body/ |
| |
| |
| |
| === TEST 10: set route(delay 1 seconds) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "delay": { |
| "duration": 1 |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 11: hit route(delay 1 seconds and return hello world) |
| --- request |
| GET /hello HTTP/1.1 |
| --- response_body |
| hello world |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 12: set route(abort with http status 200 and return "Fault Injection!\n") |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 200, |
| "body": "Fault Injection!\n" |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 13: hit route(abort with http code 200 and return "Fault Injection!\n") |
| --- request |
| GET /hello HTTP/1.1 |
| --- error_code: 200 |
| --- response_body |
| Fault Injection! |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 14: set route(abort with http status 405 and return "Fault Injection!\n") |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 405, |
| "body": "Fault Injection!\n" |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 15: hit route(abort with http status 405 and return "Fault Injection!\n") |
| --- request |
| GET /hello HTTP/1.1 |
| --- error_code: 405 |
| --- response_body |
| Fault Injection! |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 16: set route(play with redirect plugin) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 200, |
| "body": "Fault Injection!\n" |
| } |
| }, |
| "redirect": { |
| "uri": "/hello/world", |
| "ret_code": 302 |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 17: hit route(abort with http status 200 and return "Fault Injection!\n") |
| --- request |
| GET /hello HTTP/1.1 |
| --- error_code: 200 |
| --- response_body |
| Fault Injection! |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 18: set route (abort injection but with zero percentage) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 200, |
| "body": "Fault Injection!\n", |
| "percentage": 0 |
| } |
| }, |
| "redirect": { |
| "uri": "/hello/world", |
| "ret_code": 302 |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 19: hit route (redirect) |
| --- request |
| GET /hello HTTP/1.1 |
| --- error_code: 302 |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 20: set route (delay injection but with zero percentage) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "delay": { |
| "duration": 1, |
| "percentage": 0 |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello1" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 21: hit route (no wait and return hello1 world) |
| --- request |
| GET /hello HTTP/1.1 |
| --- error_code: 200 |
| --- response_body |
| hello1 world |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 22: set route(body with var) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 200, |
| "body": "client addr: $remote_addr\n" |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 23: hit route(body with var) |
| --- request |
| GET /hello |
| --- response_body |
| client addr: 127.0.0.1 |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 24: set route(abort without body) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 200 |
| } |
| }, |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 25: hit route(abort without body) |
| --- request |
| GET /hello |
| --- response_body |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 26: vars schema validation passed |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.fault-injection") |
| local ok, err = plugin.check_schema({ |
| abort = { |
| http_status = 403, |
| body = "Fault Injection!\n", |
| vars = { |
| { |
| {"arg_name","==","jack"}, |
| {"arg_age","!","<",18} |
| }, |
| { |
| {"http_apikey","==","api-key"} |
| } |
| } |
| }, |
| delay = { |
| duration = 2, |
| vars = { |
| { |
| {"arg_name","==","jack"}, |
| {"arg_age","!","<",18} |
| }, |
| { |
| {"http_apikey","==","api-key"} |
| } |
| } |
| } |
| }) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| done |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 27: vars schema validation failed(abort failed) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.fault-injection") |
| local ok, err = plugin.check_schema({ |
| abort = { |
| http_status = 403, |
| body = "Fault Injection!\n", |
| vars = { |
| {"arg_name","!=","jack"} |
| } |
| }, |
| delay = { |
| duration = 2, |
| vars = { |
| { |
| {"arg_name","==","jack"}, |
| {"arg_age","!","<",18} |
| }, |
| { |
| {"http_apikey","==","api-key"} |
| } |
| } |
| } |
| }) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| rule should be wrapped inside brackets |
| done |
| --- error_log eval |
| qr/failed to create vars expression:.*/ |
| |
| |
| |
| === TEST 28: set route and configure the vars rule in abort |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [=[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 403, |
| "body": "Fault Injection!\n", |
| "vars": [ |
| [ |
| ["arg_name","==","jack"], |
| [ "arg_age","!","<",18 ] |
| ], |
| [ |
| [ "http_apikey","==","api-key" ] |
| ] |
| ] |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]=] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 29: hit the route (all vars rules pass), execute abort |
| --- request |
| GET /hello?name=jack&age=18 |
| --- more_headers |
| apikey: api-key |
| --- error_code: 403 |
| --- response_body |
| Fault Injection! |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 30: hit the route (missing apikey), execute abort |
| --- request |
| GET /hello?name=jack&age=20 |
| --- error_code: 403 |
| --- response_body |
| Fault Injection! |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 31: hit the route (missing request parameters), execute abort |
| --- request |
| GET /hello |
| --- more_headers |
| apikey:api-key |
| --- error_code: 403 |
| --- response_body |
| Fault Injection! |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 32: hit route(`vars` do not match, `age` is missing) |
| --- request |
| GET /hello?name=allen |
| --- response_body |
| hello world |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 33: hit route(all `vars` do not match) |
| --- request |
| GET /hello |
| --- response_body |
| hello world |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 34: set route and configure the vars rule in delay |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [=[{ |
| "uri": "/hello", |
| "plugins": { |
| "fault-injection": { |
| "delay": { |
| "duration": 2, |
| "vars": [ |
| [ |
| ["arg_name","==","jack"], |
| [ "arg_age","!","<",18 ] |
| ] |
| ] |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]=] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 35: hit route(delay 2 seconds and return hello world) |
| --- request |
| GET /hello?name=jack&age=22 |
| --- response_body |
| hello world |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 36: hit route (no wait and return hello1 world) |
| --- request |
| GET /hello HTTP/1.1 |
| --- error_code: 200 |
| --- response_body |
| hello world |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 37: set route and configure the vars rule in abort and delay |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [=[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 403, |
| "body": "Fault Injection!\n", |
| "vars": [ |
| [ |
| ["arg_name","==","jack"], |
| ["arg_age","!","<",18] |
| ] |
| ] |
| }, |
| "delay": { |
| "duration": 2, |
| "vars": [ |
| [ |
| ["http_apikey","==","api-key"] |
| ] |
| ] |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]=] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 200 |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 38: hit the route (all vars rules are passed), execute abort and delay |
| --- request |
| GET /hello?name=jack&age=18 |
| --- more_headers |
| apikey: api-key |
| --- error_code: 403 |
| --- response_body |
| Fault Injection! |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 39: hit the route (abort rule does not match), only execute delay |
| --- request |
| GET /hello?name=jack&age=16 |
| --- more_headers |
| apikey: api-key |
| --- response_body |
| hello world |
| --- no_error_log |
| [error] |