| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| no_long_string(); |
| no_shuffle(); |
| no_root_location(); |
| log_level('info'); |
| run_tests; |
| |
| __DATA__ |
| |
| === TEST 1: sanity |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.api-breaker") |
| local ok, err = plugin.check_schema({ |
| break_response_code = 502, |
| unhealthy = { |
| http_statuses = {500}, |
| failures = 1, |
| }, |
| healthy = { |
| http_statuses = {200}, |
| successes = 1, |
| }, |
| }) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| done |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 2: default configuration |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.api-breaker") |
| local conf = { |
| break_response_code = 502 |
| } |
| |
| local ok, err = plugin.check_schema(conf) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say(require("toolkit.json").encode(conf)) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| {"break_response_code":502,"healthy":{"http_statuses":[200],"successes":3},"max_breaker_sec":300,"unhealthy":{"failures":3,"http_statuses":[500]}} |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 3: default `healthy` |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.api-breaker") |
| local conf = { |
| break_response_code = 502, |
| healthy = {} |
| } |
| |
| local ok, err = plugin.check_schema(conf) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say(require("toolkit.json").encode(conf)) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| {"break_response_code":502,"healthy":{"http_statuses":[200],"successes":3},"max_breaker_sec":300,"unhealthy":{"failures":3,"http_statuses":[500]}} |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 4: default `unhealthy` |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.api-breaker") |
| local conf = { |
| break_response_code = 502, |
| unhealthy = {} |
| } |
| |
| local ok, err = plugin.check_schema(conf) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say(require("toolkit.json").encode(conf)) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| {"break_response_code":502,"healthy":{"http_statuses":[200],"successes":3},"max_breaker_sec":300,"unhealthy":{"failures":3,"http_statuses":[500]}} |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 5: bad break_response_code |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "api-breaker": { |
| "break_response_code": 199, |
| "unhealthy": { |
| "http_statuses": [500, 503], |
| "failures": 3 |
| }, |
| "healthy": { |
| "http_statuses": [200, 206], |
| "successes": 3 |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/api_breaker" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin api-breaker err: property \"break_response_code\" validation failed: expected 199 to be at least 200"} |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 6: bad max_breaker_sec |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "api-breaker": { |
| "break_response_code": 200, |
| "max_breaker_sec": -1 |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/api_breaker" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 7: bad unhealthy.http_statuses |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "api-breaker": { |
| "break_response_code": 200, |
| "max_breaker_sec": 40, |
| "unhealthy": { |
| "http_statuses": [500, 603], |
| "failures": 3 |
| }, |
| "healthy": { |
| "http_statuses": [200, 206], |
| "successes": 3 |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/api_breaker" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 8: same http_statuses in healthy |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "api-breaker": { |
| "break_response_code": 500, |
| "unhealthy": { |
| "http_statuses": [500, 503], |
| "failures": 3 |
| }, |
| "healthy": { |
| "http_statuses": [206, 206], |
| "successes": 3 |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/api_breaker" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin api-breaker err: property \"healthy\" validation failed: property \"http_statuses\" validation failed: expected unique items but items 1 and 2 are equal"} |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 9: set route, http_statuses: [500, 503] |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "api-breaker": { |
| "break_response_code": 599, |
| "unhealthy": { |
| "http_statuses": [500, 503], |
| "failures": 3 |
| }, |
| "healthy": { |
| "http_statuses": [200, 206], |
| "successes": 3 |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/api_breaker" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 10: trigger breaker |
| --- request eval |
| [ |
| "GET /api_breaker?code=200", "GET /api_breaker?code=500", |
| "GET /api_breaker?code=503", "GET /api_breaker?code=500", |
| "GET /api_breaker?code=500", "GET /api_breaker?code=500" |
| ] |
| --- error_code eval |
| [200, 500, 503, 500, 599, 599] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 11: trigger reset status |
| --- request eval |
| [ |
| "GET /api_breaker?code=500", "GET /api_breaker?code=500", |
| |
| "GET /api_breaker?code=200", "GET /api_breaker?code=200", |
| "GET /api_breaker?code=200", |
| |
| "GET /api_breaker?code=500", "GET /api_breaker?code=500" |
| ] |
| --- error_code eval |
| [ |
| 500, 500, |
| 200, 200, 200, |
| 500, 500 |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 12: trigger del healthy numeration |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local json = require("toolkit.json") |
| |
| -- trigger to unhealth |
| for i = 1, 4 do |
| local code = t('/api_breaker?code=500', ngx.HTTP_GET) |
| ngx.say("code: ", code) |
| end |
| |
| -- break for 3 seconds |
| ngx.sleep(3) |
| |
| -- make a try |
| for i = 1, 4 do |
| local code = t('/api_breaker?code=200', ngx.HTTP_GET) |
| ngx.say("code: ", code) |
| end |
| |
| for i = 1, 4 do |
| local code = t('/api_breaker?code=500', ngx.HTTP_GET) |
| ngx.say("code: ", code) |
| end |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| code: 500 |
| code: 500 |
| code: 500 |
| code: 599 |
| code: 200 |
| code: 200 |
| code: 200 |
| code: 200 |
| code: 500 |
| code: 500 |
| code: 500 |
| code: 599 |
| --- no_error_log |
| [error] |
| breaker_time: 4 |
| --- error_log |
| breaker_time: 2 |
| |
| |
| |
| === TEST 13: add plugin with default config value |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "api-breaker": { |
| "break_response_code": 502, |
| "unhealthy": { |
| "failures": 3 |
| }, |
| "healthy": { |
| "successes": 3 |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/api_breaker" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 14: default value |
| --- request |
| GET /api_breaker?code=500 |
| --- error_code: 500 |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 15: trigger default value of unhealthy.http_statuses breaker |
| --- request eval |
| [ |
| "GET /api_breaker?code=200", "GET /api_breaker?code=500", |
| "GET /api_breaker?code=503", "GET /api_breaker?code=500", |
| "GET /api_breaker?code=500", "GET /api_breaker?code=500" |
| ] |
| --- error_code eval |
| [200, 500, 503, 500, 500, 502] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 16: unhealthy -> timeout -> normal |
| --- config |
| location /mysleep { |
| proxy_pass "http://127.0.0.1:1980/mysleep?seconds=1"; |
| } |
| --- request eval |
| [ |
| "GET /api_breaker?code=500", |
| "GET /api_breaker?code=500", |
| "GET /api_breaker?code=500", |
| "GET /api_breaker?code=200", |
| |
| "GET /mysleep", |
| "GET /mysleep", |
| "GET /mysleep", |
| |
| "GET /api_breaker?code=200", |
| "GET /api_breaker?code=200", |
| "GET /api_breaker?code=200", |
| "GET /api_breaker?code=200", |
| "GET /api_breaker?code=200"] |
| --- error_code eval |
| [ |
| 500, 500, 500, 502, |
| 200, 200, 200, |
| 200, 200, 200, 200,200 |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 17: unhealthy -> timeout -> unhealthy |
| --- config |
| location /mysleep { |
| proxy_pass "http://127.0.0.1:1980/mysleep?seconds=1"; |
| } |
| --- request eval |
| [ |
| "GET /api_breaker?code=500", "GET /api_breaker?code=500", |
| "GET /api_breaker?code=500", "GET /api_breaker?code=200", |
| |
| "GET /mysleep", "GET /mysleep", "GET /mysleep", |
| |
| "GET /api_breaker?code=500","GET /api_breaker?code=500", |
| "GET /api_breaker?code=500","GET /api_breaker?code=500" |
| ] |
| --- error_code eval |
| [ |
| 500, 500, 500, 502, |
| 200, 200, 200, |
| 500,502,502,502 |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 18: enable plugin, unhealthy.failures=1 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "api-breaker": { |
| "break_response_code": 502, |
| "max_breaker_sec": 10, |
| "unhealthy": { |
| "http_statuses": [500, 503], |
| "failures": 1 |
| }, |
| "healthy": { |
| "successes": 3 |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/api_breaker" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 19: hit route 20 times, confirm the breaker time |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local json = require("toolkit.json") |
| |
| local status_count = {} |
| for i = 1, 20 do |
| local code = t('/api_breaker?code=500', ngx.HTTP_GET) |
| code = tostring(code) |
| status_count[code] = (status_count[code] or 0) + 1 |
| ngx.sleep(1) |
| end |
| |
| ngx.say(json.encode(status_count)) |
| } |
| } |
| --- request |
| GET /t |
| --- no_error_log |
| [error] |
| phase_func(): breaker_time: 16 |
| --- error_log |
| phase_func(): breaker_time: 2 |
| phase_func(): breaker_time: 4 |
| phase_func(): breaker_time: 8 |
| phase_func(): breaker_time: 10 |
| --- response_body |
| {"500":4,"502":16} |
| --- timeout: 25 |