| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| log_level('info'); |
| worker_connections(256); |
| no_root_location(); |
| no_shuffle(); |
| |
| add_block_preprocessor(sub { |
| my ($block) = @_; |
| |
| if (!$block->request) { |
| $block->set_value("request", "GET /t"); |
| } |
| }); |
| |
| run_tests(); |
| |
| __DATA__ |
| |
| === TEST 1: set route(id: 1) and available upstream and show_upstream_status_in_response_header: true |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 2: hit the route and $upstream_status is 200 |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: true |
| --- request |
| GET /hello |
| --- response_body |
| hello world |
| --- response_headers |
| X-APISIX-Upstream-Status: 200 |
| |
| |
| |
| === TEST 3: set route(id: 1) and set the timeout field |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin", |
| "timeout": { |
| "connect": 0.5, |
| "send": 0.5, |
| "read": 0.5 |
| } |
| }, |
| "uri": "/mysleep" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 4: hit routes (timeout) and $upstream_status is 504 |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: true |
| --- request |
| GET /mysleep?seconds=1 |
| --- error_code: 504 |
| --- response_body eval |
| qr/504 Gateway Time-out/ |
| --- response_headers |
| X-APISIX-Upstream-Status: 504 |
| |
| |
| |
| === TEST 5: set route(id: 1), upstream service is not available |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 6: hit routes and $upstream_status is 502 |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: true |
| --- request |
| GET /hello |
| --- error_code: 502 |
| --- response_body eval |
| qr/502 Bad Gateway/ |
| --- response_headers |
| X-APISIX-Upstream-Status: 502 |
| |
| |
| |
| === TEST 7: set route(id: 1) and uri is `/server_error` |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/server_error" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 8: hit routes and $upstream_status is 500 |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: true |
| --- request |
| GET /server_error |
| --- error_code: 500 |
| --- response_body_like |
| .*apisix.apache.org.* |
| --- response_headers |
| X-APISIX-Upstream-Status: 500 |
| |
| |
| |
| === TEST 9: set upstream(id: 1, retries = 2), has available upstream |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/upstreams/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "nodes": { |
| "127.1.0.2:1": 1, |
| "127.0.0.1:1980": 1 |
| }, |
| "retries": 2, |
| "type": "roundrobin" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 10: set route(id: 1) and bind the upstream_id |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello", |
| "upstream_id": "1" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 11: hit routes and $upstream_status is `502, 200` |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: true |
| --- request |
| GET /hello |
| --- response_body |
| hello world |
| --- response_headers_raw_like eval |
| qr/X-APISIX-Upstream-Status: 502, 200|X-APISIX-Upstream-Status: 200/ |
| --- error_log |
| |
| |
| |
| === TEST 12: set upstream(id: 1, retries = 2), all upstream nodes are unavailable |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/upstreams/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "nodes": { |
| "127.0.0.3:1": 1, |
| "127.0.0.2:1": 1, |
| "127.0.0.1:1": 1 |
| |
| }, |
| "retries": 2, |
| "type": "roundrobin" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 13: hit routes, retry between upstream failed, $upstream_status is `502, 502, 502` |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: true |
| --- request |
| GET /hello |
| --- error_code: 502 |
| --- response_headers_raw_like eval |
| qr/X-APISIX-Upstream-Status: 502, 502, 502/ |
| |
| |
| |
| === TEST 14: return 500 status code from APISIX |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 500, |
| "body": "Fault Injection!\n" |
| } |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 15: hit routes, status code is 500 |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: true |
| --- request |
| GET /hello |
| --- error_code: 500 |
| --- response_body |
| Fault Injection! |
| --- grep_error_log eval |
| qr/X-APISIX-Upstream-Status: 500/ |
| --- grep_error_log_out |
| |
| |
| |
| === TEST 16: return 200 status code from APISIX |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 200, |
| "body": "Fault Injection!\n" |
| } |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 17: hit routes, status code is 200 |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: true |
| --- request |
| GET /hello |
| --- response_body |
| Fault Injection! |
| --- grep_error_log eval |
| qr/X-APISIX-Upstream-Status: 200/ |
| --- grep_error_log_out |
| |
| |
| |
| === TEST 18: return 200 status code from APISIX (with show_upstream_status_in_response_header:false) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "fault-injection": { |
| "abort": { |
| "http_status": 200, |
| "body": "Fault Injection!\n" |
| } |
| } |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 19: hit routes, status code is 200 |
| --- yaml_config |
| apisix: |
| show_upstream_status_in_response_header: false |
| --- request |
| GET /hello |
| --- response_body |
| Fault Injection! |
| --- grep_error_log eval |
| qr/X-APISIX-Upstream-Status: 200/ |
| --- grep_error_log_out |
