| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| log_level('info'); |
| no_root_location(); |
| no_shuffle(); |
| workers(4); |
| |
| our $yaml_config = <<_EOC_; |
| apisix: |
| node_listen: 1984 |
| config_center: yaml |
| enable_admin: false |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| prefix: "/nacos/v1/" |
| fetch_interval: 1 |
| weight: 1 |
| timeout: |
| connect: 2000 |
| send: 2000 |
| read: 5000 |
| |
| _EOC_ |
| |
| our $yaml_auth_config = <<_EOC_; |
| apisix: |
| node_listen: 1984 |
| config_center: yaml |
| enable_admin: false |
| discovery: |
| nacos: |
| host: |
| - "http://nacos:nacos\@127.0.0.1:8848" |
| prefix: "/nacos/v1/" |
| fetch_interval: 1 |
| weight: 1 |
| timeout: |
| connect: 2000 |
| send: 2000 |
| read: 5000 |
| |
| _EOC_ |
| |
| run_tests(); |
| |
| __DATA__ |
| |
| === TEST 1: get APISIX-NACOS info from NACOS - no auth |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error, error] |
| |
| |
| |
| === TEST 2: error service_name name - no auth |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS-DEMO |
| discovery_type: nacos |
| type: roundrobin |
| |
| #END |
| --- request |
| GET /hello |
| --- error_code: 503 |
| |
| |
| |
| === TEST 3: get APISIX-NACOS info from NACOS - auth |
| --- yaml_config eval: $::yaml_auth_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error, error] |
| |
| |
| |
| === TEST 4: error service_name name - auth |
| --- yaml_config eval: $::yaml_auth_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS-DEMO |
| discovery_type: nacos |
| type: roundrobin |
| |
| #END |
| --- request |
| GET /hello |
| --- error_code: 503 |
| |
| |
| |
| === TEST 5: get APISIX-NACOS info from NACOS - configured in services |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| service_id: 1 |
| services: |
| - |
| id: 1 |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 6: get APISIX-NACOS info from NACOS - configured in upstreams + etcd |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/upstreams/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "service_name": "APISIX-NACOS", |
| "discovery_type": "nacos", |
| "type": "roundrobin" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello", |
| "upstream_id": 1 |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 7: hit |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 8: get APISIX-NACOS info from NACOS - no auth with namespace |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| namespace_id: test_ns |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 9: error namespace_id - no auth |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS-DEMO |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| namespace_id: err_ns |
| #END |
| --- request |
| GET /hello |
| --- error_code: 503 |
| |
| |
| |
| === TEST 10: get APISIX-NACOS info from NACOS - configured in services with namespace |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| service_id: 1 |
| services: |
| - |
| id: 1 |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| namespace_id: test_ns |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 11: get APISIX-NACOS info from NACOS - configured in upstreams + etcd with namespace |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/upstreams/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "service_name": "APISIX-NACOS", |
| "discovery_type": "nacos", |
| "type": "roundrobin", |
| "discovery_args": { |
| "namespace_id": "test_ns" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello", |
| "upstream_id": 1 |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 12: hit with namespace |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 13: get APISIX-NACOS info from NACOS - no auth with group_name |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| group_name: test_group |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 14: error group_name - no auth |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS-DEMO |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| group_name: err_group_name |
| #END |
| --- request |
| GET /hello |
| --- error_code: 503 |
| |
| |
| |
| === TEST 15: get APISIX-NACOS info from NACOS - configured in services with group_name |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| service_id: 1 |
| services: |
| - |
| id: 1 |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| group_name: test_group |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 16: get APISIX-NACOS info from NACOS - configured in upstreams + etcd with group_name |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/upstreams/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "service_name": "APISIX-NACOS", |
| "discovery_type": "nacos", |
| "type": "roundrobin", |
| "discovery_args": { |
| "group_name": "test_group" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello", |
| "upstream_id": 1 |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 17: hit with group_name |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 18: get APISIX-NACOS info from NACOS - no auth with namespace_id and group_name |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| namespace_id: test_ns |
| group_name: test_group |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 19: error group_name and correct namespace_id - no auth |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS-DEMO |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| namespace_id: test_ns |
| group_name: err_group_name |
| #END |
| --- request |
| GET /hello |
| --- error_code: 503 |
| |
| |
| |
| === TEST 20: error namespace_id and correct group_name - no auth |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS-DEMO |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| namespace_id: err_ns |
| group_name: test_group |
| #END |
| --- request |
| GET /hello |
| --- error_code: 503 |
| |
| |
| |
| === TEST 21: error namespace_id and error group_name - no auth |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| upstream: |
| service_name: APISIX-NACOS-DEMO |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| namespace_id: err_ns |
| group_name: err_group_name |
| #END |
| --- request |
| GET /hello |
| --- error_code: 503 |
| |
| |
| |
| === TEST 22: get APISIX-NACOS info from NACOS - configured in services with namespace_id and group_name |
| --- yaml_config eval: $::yaml_config |
| --- apisix_yaml |
| routes: |
| - |
| uri: /hello |
| service_id: 1 |
| services: |
| - |
| id: 1 |
| upstream: |
| service_name: APISIX-NACOS |
| discovery_type: nacos |
| type: roundrobin |
| discovery_args: |
| namespace_id: test_ns |
| group_name: test_group |
| #END |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 23: get APISIX-NACOS info from NACOS - configured in upstreams + etcd with namespace_id and group_name |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/upstreams/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "service_name": "APISIX-NACOS", |
| "discovery_type": "nacos", |
| "type": "roundrobin", |
| "discovery_args": { |
| "namespace_id": "test_ns", |
| "group_name": "test_group" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello", |
| "upstream_id": 1 |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 24: hit with namespace_id and group_name |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- pipelined_requests eval |
| [ |
| "GET /hello", |
| "GET /hello", |
| ] |
| --- response_body_like eval |
| [ |
| qr/server [1-2]/, |
| qr/server [1-2]/, |
| ] |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 25: same namespace_id and service_name, different group_name |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| |
| -- use nacos-service5 |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello", |
| "upstream": { |
| "service_name": "APISIX-NACOS", |
| "discovery_type": "nacos", |
| "type": "roundrobin", |
| "discovery_args": { |
| "namespace_id": "test_ns", |
| "group_name": "test_group" |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| -- use nacos-service6 |
| local code, body = t('/apisix/admin/routes/2', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello1", |
| "upstream": { |
| "service_name": "APISIX-NACOS", |
| "discovery_type": "nacos", |
| "type": "roundrobin", |
| "discovery_args": { |
| "namespace_id": "test_ns", |
| "group_name": "test_group2" |
| } |
| }, |
| "plugins": { |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.sleep(1.5) |
| |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri1 = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri1, { method = "GET"}) |
| if err then |
| ngx.log(ngx.ERR, err) |
| ngx.status = res.status |
| return |
| end |
| ngx.say(res.body) |
| |
| local uri2 = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello1" |
| res, err = httpc:request_uri(uri2, { method = "GET"}) |
| if err then |
| ngx.log(ngx.ERR, err) |
| ngx.status = res.status |
| return |
| end |
| ngx.say(res.body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| server 1 |
| server 3 |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 26: same group_name and service_name, different namespace_id |
| --- extra_yaml_config |
| discovery: |
| nacos: |
| host: |
| - "http://127.0.0.1:8858" |
| fetch_interval: 1 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| |
| -- use nacos-service5 |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello", |
| "upstream": { |
| "service_name": "APISIX-NACOS", |
| "discovery_type": "nacos", |
| "type": "roundrobin", |
| "discovery_args": { |
| "namespace_id": "test_ns", |
| "group_name": "test_group" |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| -- use nacos-service7 |
| local code, body = t('/apisix/admin/routes/2', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/hello1", |
| "upstream": { |
| "service_name": "APISIX-NACOS", |
| "discovery_type": "nacos", |
| "type": "roundrobin", |
| "discovery_args": { |
| "namespace_id": "test_ns2", |
| "group_name": "test_group" |
| } |
| }, |
| "plugins": { |
| "proxy-rewrite": { |
| "uri": "/hello" |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.sleep(1.5) |
| |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri1 = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri1, { method = "GET"}) |
| if err then |
| ngx.log(ngx.ERR, err) |
| ngx.status = res.status |
| return |
| end |
| ngx.say(res.body) |
| |
| local uri2 = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello1" |
| res, err = httpc:request_uri(uri2, { method = "GET"}) |
| if err then |
| ngx.log(ngx.ERR, err) |
| ngx.status = res.status |
| return |
| end |
| ngx.say(res.body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| server 1 |
| server 4 |
| --- no_error_log |
| [error] |