| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| no_long_string(); |
| no_root_location(); |
| no_shuffle(); |
| add_block_preprocessor(sub { |
| my ($block) = @_; |
| |
| if (!$block->request) { |
| $block->set_value("request", "GET /t"); |
| } |
| }); |
| |
| run_tests(); |
| |
| |
| __DATA__ |
| |
| === TEST 1: schema check |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.workflow") |
| local data = { |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "return", |
| { |
| code = 403 |
| } |
| } |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| } |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "return", |
| { |
| status = 403 |
| } |
| } |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "return", |
| { |
| code = "403" |
| } |
| } |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| |
| }, |
| actions = { |
| { |
| "return", |
| { |
| code = 403 |
| } |
| } |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "fake", |
| { |
| code = 403 |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| for _, conf in ipairs(data) do |
| local ok, err = plugin.check_schema(conf) |
| if not ok then |
| ngx.say(err) |
| else |
| ngx.say("done") |
| end |
| end |
| } |
| } |
| --- response_body |
| done |
| property "rules" validation failed: failed to validate item 1: property "actions" is required |
| property "rules" validation failed: failed to validate item 1: property "actions" validation failed: failed to validate item 1: expect array to have at least 1 items |
| failed to validate the 'return' action: property "code" is required |
| failed to validate the 'return' action: property "code" validation failed: wrong type: expected integer, got string |
| property "rules" validation failed: failed to validate item 1: property "case" validation failed: expect array to have at least 1 items |
| unsupported action: fake |
| |
| |
| |
| === TEST 2: set plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "workflow": { |
| "rules": [ |
| { |
| "case": [ |
| ["uri", "==", "/hello"] |
| ], |
| "actions": [ |
| [ |
| "return", |
| { |
| "code": 403 |
| } |
| ] |
| ] |
| } |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 3: trigger workflow |
| --- request |
| GET /hello |
| --- error_code: 403 |
| |
| |
| |
| === TEST 4: multiple conditions in one case |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "workflow": { |
| "rules": [ |
| { |
| "case": [ |
| ["uri", "==", "/hello"], |
| ["arg_foo", "==", "bar"] |
| ], |
| "actions": [ |
| [ |
| "return", |
| { |
| "code": 403 |
| } |
| ] |
| ] |
| } |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 5: missing match the only case |
| --- request |
| GET /hello?foo=bad |
| |
| |
| |
| === TEST 6: trigger workflow |
| --- request |
| GET /hello?foo=bar |
| --- error_code: 403 |
| --- response_body |
| {"error_msg":"rejected by workflow"} |
| |
| |
| |
| === TEST 7: multiple cases with different actions |
| --- config |
| location /t { |
| content_by_lua_block { |
| local json = require("toolkit.json") |
| local t = require("lib.test_admin").test |
| local data = { |
| uri = "/*", |
| plugins = { |
| workflow = { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "return", |
| { |
| code = 403 |
| } |
| } |
| } |
| }, |
| { |
| case = { |
| {"uri", "==", "/hello2"} |
| }, |
| actions = { |
| { |
| "return", |
| { |
| code = 401 |
| } |
| } |
| } |
| } |
| } |
| } |
| }, |
| upstream = { |
| nodes = { |
| ["127.0.0.1:1980"] = 1 |
| }, |
| type = "roundrobin" |
| } |
| } |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| json.encode(data) |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 8: trigger one case |
| --- request |
| GET /hello |
| --- error_code: 403 |
| |
| |
| |
| === TEST 9: trigger another case |
| --- request |
| GET /hello2 |
| --- error_code: 401 |
| |
| |
| |
| === TEST 10: match case in order |
| # rules is an array, match in the order of the index of the array, |
| # when cases are matched, actions are executed and do not continue |
| --- config |
| location /t { |
| content_by_lua_block { |
| local json = require("toolkit.json") |
| local t = require("lib.test_admin").test |
| local data = { |
| uri = "/*", |
| plugins = { |
| workflow = { |
| rules = { |
| { |
| case = { |
| {"arg_foo", "==", "bar"} |
| }, |
| actions = { |
| { |
| "return", |
| { |
| code = 403 |
| } |
| } |
| } |
| }, |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "return", |
| { |
| code = 401 |
| } |
| } |
| } |
| } |
| } |
| } |
| }, |
| upstream = { |
| nodes = { |
| ["127.0.0.1:1980"] = 1 |
| }, |
| type = "roundrobin" |
| } |
| } |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| json.encode(data) |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 11: both case 1&2 matched, trigger the first cases |
| --- request |
| GET /hello?foo=bar |
| --- error_code: 403 |
| |
| |
| |
| === TEST 12: case 1 mismatched, trigger the second cases |
| --- request |
| GET /hello?foo=bad |
| --- error_code: 401 |
| |
| |
| |
| === TEST 13: all cases mismatched, pass to upstream |
| --- request |
| GET /hello1 |
| --- response_body |
| hello1 world |
| |
| |
| |
| === TEST 14: schema check(limit-count) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.workflow") |
| local data = { |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "limit-count", |
| {count = 2, time_window = 60, rejected_code = 503, key = 'remote_addr'} |
| } |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "limit-count", |
| {count = 2} |
| } |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "limit-count", |
| {time_window = 60} |
| } |
| } |
| } |
| } |
| }, |
| { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "limit-count", |
| { |
| count = 2, |
| time_window = 60, |
| rejected_code = 503, |
| group = "services_1" |
| } |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| for _, conf in ipairs(data) do |
| local ok, err = plugin.check_schema(conf) |
| if not ok then |
| ngx.say(err) |
| else |
| ngx.say("done") |
| end |
| end |
| } |
| } |
| --- response_body |
| done |
| failed to validate the 'limit-count' action: property "time_window" is required |
| failed to validate the 'limit-count' action: property "count" is required |
| failed to validate the 'limit-count' action: group is not supported |
| |
| |
| |
| === TEST 15: set actions as limit-count |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "workflow": { |
| "rules": [ |
| { |
| "case": [ |
| ["uri", "==", "/hello"] |
| ], |
| "actions": [ |
| [ |
| "limit-count", |
| { |
| "count": 3, |
| "time_window": 60, |
| "rejected_code": 503, |
| "key": "remote_addr" |
| } |
| ] |
| ] |
| } |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 16: up the limit |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 503] |
| |
| |
| |
| === TEST 17: the conf in actions is isolation |
| --- config |
| location /t { |
| content_by_lua_block { |
| local json = require("toolkit.json") |
| local t = require("lib.test_admin").test |
| local data = { |
| uri = "/*", |
| plugins = { |
| workflow = { |
| rules = { |
| { |
| case = { |
| {"uri", "==", "/hello"} |
| }, |
| actions = { |
| { |
| "limit-count", |
| { |
| count = 3, |
| time_window = 60, |
| rejected_code = 503, |
| key = "remote_addr" |
| } |
| } |
| } |
| }, |
| { |
| case = { |
| {"uri", "==", "/hello1"} |
| }, |
| actions = { |
| { |
| "limit-count", |
| { |
| count = 3, |
| time_window = 60, |
| rejected_code = 503, |
| key = "remote_addr" |
| } |
| } |
| } |
| } |
| } |
| } |
| }, |
| upstream = { |
| nodes = { |
| ["127.0.0.1:1980"] = 1 |
| }, |
| type = "roundrobin" |
| } |
| } |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| json.encode(data) |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 18: cross-hit case 1 and case 2, up limit by isolation |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello1", "GET /hello", "GET /hello1", |
| "GET /hello", "GET /hello1", "GET /hello", "GET /hello1"] |
| --- error_code eval |
| [200, 200, 200, 200, 200, 200, 503, 503] |
| |
| |
| |
| === TEST 19: multiple conditions in one case |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "workflow": { |
| "rules": [ |
| { |
| "case": [ |
| "OR", |
| ["arg_foo", "==", "bar"], |
| ["uri", "==", "/hello"] |
| ], |
| "actions": [ |
| [ |
| "return", |
| { |
| "code": 403 |
| } |
| ] |
| ] |
| } |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 20: trigger workflow |
| --- request |
| GET /hello |
| --- error_code: 403 |
| --- response_body |
| {"error_msg":"rejected by workflow"} |