| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| use t::APISIX 'no_plan'; |
| add_block_preprocessor(sub { |
| my ($block) = @_; |
| |
| if (!$block->extra_yaml_config) { |
| my $extra_yaml_config = <<_EOC_; |
| plugins: |
| - opentelemetry |
| _EOC_ |
| $block->set_value("extra_yaml_config", $extra_yaml_config); |
| } |
| |
| if (!$block->request) { |
| $block->set_value("request", "GET /t"); |
| } |
| |
| if (!defined $block->response_body) { |
| $block->set_value("response_body", "passed\n"); |
| } |
| $block; |
| }); |
| repeat_each(1); |
| no_long_string(); |
| no_root_location(); |
| log_level("debug"); |
| |
| run_tests; |
| |
| __DATA__ |
| |
| === TEST 1: add plugin metadata |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/plugin_metadata/opentelemetry', |
| ngx.HTTP_PUT, |
| [[{ |
| "batch_span_processor": { |
| "max_export_batch_size": 1, |
| "inactive_timeout": 0.5 |
| }, |
| "collector": { |
| "address": "127.0.0.1:4318", |
| "request_timeout": 3, |
| "request_headers": { |
| "foo": "bar" |
| } |
| }, |
| "trace_id_source": "x-request-id" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| |
| |
| |
| === TEST 2: add plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "opentelemetry": { |
| "sampler": { |
| "name": "always_on" |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/opentracing" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| |
| |
| |
| === TEST 3: trigger opentelemetry |
| --- request |
| GET /opentracing |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 4: check log |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*opentelemetry-lua.*/ |
| |
| |
| |
| === TEST 5: use trace_id_ratio sampler, fraction = 1.0 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "opentelemetry": { |
| "sampler": { |
| "name": "trace_id_ratio", |
| "options": { |
| "fraction": 1.0 |
| } |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/opentracing" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| |
| |
| |
| === TEST 6: trigger opentelemetry |
| --- request |
| GET /opentracing |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 7: check log |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*opentelemetry-lua.*/ |
| |
| |
| |
| === TEST 8: use parent_base sampler, root sampler = trace_id_ratio with default fraction = 0 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "opentelemetry": { |
| "sampler": { |
| "name": "parent_base", |
| "options": { |
| "root": { |
| "name": "trace_id_ratio" |
| } |
| } |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/opentracing" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| |
| |
| |
| === TEST 9: trigger opentelemetry, trace_flag = 1 |
| --- request |
| GET /opentracing |
| --- more_headers |
| traceparent: 00-00000000000000000000000000000001-0000000000000001-01 |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 10: check log |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*"traceId":"00000000000000000000000000000001",.*/ |
| |
| |
| |
| === TEST 11: use parent_base sampler, root sampler = trace_id_ratio with fraction = 1 |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "opentelemetry": { |
| "sampler": { |
| "name": "parent_base", |
| "options": { |
| "root": { |
| "name": "trace_id_ratio", |
| "options": { |
| "fraction": 1.0 |
| } |
| } |
| } |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/opentracing" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| |
| |
| |
| === TEST 12: trigger opentelemetry, trace_flag = 1 |
| --- request |
| GET /opentracing |
| --- more_headers |
| traceparent: 00-00000000000000000000000000000001-0000000000000001-01 |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 13: check log |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*"traceId":"00000000000000000000000000000001",.*/ |
| |
| |
| |
| === TEST 14: set additional_attributes |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/services/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "name": "service_name", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "name": "route_name", |
| "plugins": { |
| "opentelemetry": { |
| "sampler": { |
| "name": "always_on" |
| }, |
| "additional_attributes": [ |
| "http_user_agent", |
| "arg_foo", |
| "cookie_token", |
| "remote_addr" |
| ] |
| } |
| }, |
| "uri": "/opentracing", |
| "service_id": "1" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| |
| |
| |
| === TEST 15: trigger opentelemetry |
| --- request |
| GET /opentracing?foo=bar&a=b |
| --- more_headers |
| X-Request-Id: 01010101010101010101010101010101 |
| User-Agent: test_nginx |
| Cookie: token=auth_token; |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 16: check log |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*\/opentracing\?foo=bar.*/ |
| |
| |
| |
| === TEST 17: create route for /specific_status |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "name": "route_name", |
| "plugins": { |
| "opentelemetry": { |
| "sampler": { |
| "name": "always_on" |
| } |
| } |
| }, |
| "uri": "/specific_status", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| |
| |
| |
| === TEST 18: test response empty body |
| --- request |
| HEAD /specific_status |
| --- response_body |
| --- wait: 2 |
| |
| |
| |
| === TEST 19: check log |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*\/specific_status.*/ |
| |
| |
| |
| === TEST 20: set additional_attributes with numeric nginx variables |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "name": "route_name", |
| "plugins": { |
| "opentelemetry": { |
| "sampler": { |
| "name": "always_on" |
| }, |
| "additional_attributes": [ |
| "request_time", |
| "upstream_response_time", |
| "bytes_sent" |
| ] |
| } |
| }, |
| "uri": "/opentracing", |
| "service_id": "1" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| |
| |
| |
| === TEST 21: trigger opentelemetry, numeric nginx variables must not cause encode error |
| --- request |
| GET /opentracing |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 22: check span exported with numeric additional attributes |
| # Asserts that numeric nginx variables land as `stringValue` (not intValue, |
| # not dropped) once additional_attributes is configured for them. |
| # upstream_response_time is intentionally not checked: this test serves |
| # /opentracing directly, so $upstream_response_time is nil and the plugin |
| # correctly omits the attribute. request_time and bytes_sent are always set. |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*opentelemetry-lua.*"key":"request_time","value":\{"stringValue":"[^"]+"\}.*"key":"bytes_sent","value":\{"stringValue":"[^"]+"\}.*/s |
| |
| |
| |
| === TEST 23: setup consumer_name in additional_attributes |
| --- extra_yaml_config |
| plugins: |
| - opentelemetry |
| - key-auth |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/consumers', |
| ngx.HTTP_PUT, |
| [[{ |
| "username": "john", |
| "plugins": { |
| "key-auth": { |
| "key": "john-key" |
| } |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "key-auth": {}, |
| "opentelemetry": { |
| "sampler": { |
| "name": "always_on" |
| }, |
| "additional_attributes": [ |
| "consumer_name" |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/opentracing" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| |
| |
| |
| === TEST 24: trigger opentelemetry with consumer |
| --- extra_yaml_config |
| plugins: |
| - opentelemetry |
| - key-auth |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: 01010101010101010101010101010102 |
| apikey: john-key |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 25: check consumer_name in span attributes |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*consumer_name.*john.*/ |
| |
| |
| |
| === TEST 26: set additional_header_prefix_attributes with header added by lower-priority plugin |
| --- extra_yaml_config |
| plugins: |
| - opentelemetry |
| - serverless-pre-function |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "serverless-pre-function": { |
| "phase": "rewrite", |
| "functions": ["return function(conf, ctx) ngx.req.set_header('x-injected-by-plugin', 'test-value') end"] |
| }, |
| "opentelemetry": { |
| "sampler": { |
| "name": "always_on" |
| }, |
| "additional_header_prefix_attributes": [ |
| "x-injected-*" |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/opentracing" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| |
| |
| |
| === TEST 27: trigger opentelemetry with header injected by lower-priority plugin |
| --- extra_yaml_config |
| plugins: |
| - opentelemetry |
| - serverless-pre-function |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: 01010101010101010101010101010103 |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 28: check header from lower-priority plugin appears in span attributes |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/.*x-injected-by-plugin.*test-value.*/ |
| |
| |
| |
| === TEST 29: updating plugin_metadata rebuilds the cached tracer on a warm worker |
| --- extra_yaml_config |
| apisix: |
| tracing: true |
| plugins: |
| - opentelemetry |
| --- config |
| location /setup_first { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local plugin = require("apisix.plugin") |
| local code, body = t('/apisix/admin/plugin_metadata/opentelemetry', ngx.HTTP_PUT, |
| [[{"batch_span_processor":{"max_export_batch_size":1,"inactive_timeout":0.5},"collector":{"address":"127.0.0.1:4318"},"resource":{"service.name":"otel-meta-change-first"}}]]) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| code, body = t('/apisix/admin/routes/1', ngx.HTTP_PUT, |
| [[{"plugins":{"opentelemetry":{"sampler":{"name":"always_on"}}},"upstream":{"nodes":{"127.0.0.1:1980":1},"type":"roundrobin"},"uri":"/opentracing"}]]) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| -- wait until this worker sees the metadata so the warm-up span uses it |
| local seen |
| for _ = 1, 50 do |
| local m = plugin.plugin_metadata("opentelemetry") |
| if m and m.value and m.value.resource |
| and m.value.resource["service.name"] == "otel-meta-change-first" then |
| seen = true |
| break |
| end |
| ngx.sleep(0.1) |
| end |
| if not seen then |
| ngx.status = 500 |
| ngx.say("metadata did not propagate") |
| return |
| end |
| ngx.say("ok") |
| } |
| } |
| location /setup_second { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local plugin = require("apisix.plugin") |
| local code, body = t('/apisix/admin/plugin_metadata/opentelemetry', ngx.HTTP_PUT, |
| [[{"batch_span_processor":{"max_export_batch_size":1,"inactive_timeout":0.5},"collector":{"address":"127.0.0.1:4318"},"resource":{"service.name":"otel-meta-change-second"}}]]) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| -- wait until this worker sees the updated metadata before the next span |
| local seen |
| for _ = 1, 50 do |
| local m = plugin.plugin_metadata("opentelemetry") |
| if m and m.value and m.value.resource |
| and m.value.resource["service.name"] == "otel-meta-change-second" then |
| seen = true |
| break |
| end |
| ngx.sleep(0.1) |
| end |
| if not seen then |
| ngx.status = 500 |
| ngx.say("metadata did not propagate") |
| return |
| end |
| ngx.say("ok") |
| } |
| } |
| --- pipelined_requests eval |
| ["GET /setup_first", "GET /opentracing", "GET /setup_second", "GET /opentracing"] |
| --- response_body eval |
| ["ok\n", "opentracing\n", "ok\n", "opentracing\n"] |
| --- wait: 3 |
| |
| |
| |
| === TEST 30: core span from inject_core_spans must carry the updated service.name |
| --- exec |
| grep apisix.phase.access ci/pod/otelcol-contrib/data-otlp.json | tail -n 1 |
| --- response_body eval |
| qr/otel-meta-change-second/ |
| |
| |
| |
| === TEST 31: reset metadata trace_id_source = x-request-id |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/plugin_metadata/opentelemetry', |
| ngx.HTTP_PUT, |
| [[{ |
| "batch_span_processor": { |
| "max_export_batch_size": 1, |
| "inactive_timeout": 0.5 |
| }, |
| "trace_id_source": "x-request-id", |
| "resource": { |
| "service.name": "APISIX" |
| }, |
| "collector": { |
| "address": "127.0.0.1:4318", |
| "request_timeout": 3 |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| |
| |
| |
| === TEST 32: reset route for x-request-id validation |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "name": "route_name", |
| "plugins": { |
| "opentelemetry": { |
| "sampler": { |
| "name": "always_on" |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/opentracing" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| |
| |
| |
| === TEST 33: invalid (UUID) x-request-id should not crash |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: 550e8400-e29b-41d4-a716-446655440000 |
| --- wait: 2 |
| --- response_body |
| opentracing |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 34: invalid x-request-id still exports a valid random trace id |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/"traceId"\s*:\s*"[0-9a-f]{32}"/ |
| |
| |
| |
| === TEST 35: all-zero x-request-id must not be used as trace id |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: 00000000000000000000000000000000 |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 36: all-zero id is replaced by a non-zero random trace id |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/"traceId"\s*:\s*"(?!0{32})[0-9a-f]{32}"/ |
| |
| |
| |
| === TEST 37: uppercase 32-hex x-request-id is used |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: 550E8400E29B41D4A716446655440000 |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 38: uppercase 32-hex is lowercased and used as trace id |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/"traceId"\s*:\s*"550e8400e29b41d4a716446655440000"/ |
| |
| |
| |
| === TEST 39: duplicated x-request-id header should not crash |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: 550e8400e29b41d4a716446655440000 |
| X-Request-Id: aabbccddeeff00112233445566778899 |
| --- wait: 2 |
| --- response_body |
| opentracing |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 40: missing x-request-id falls back to default generator |
| --- request |
| GET /opentracing |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 41: missing x-request-id still exports a valid trace id |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/"traceId"\s*:\s*"[0-9a-f]{32}"/ |
| |
| |
| |
| === TEST 42: non-hex x-request-id falls back to default generator |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 43: non-hex x-request-id still exports a valid trace id |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/"traceId"\s*:\s*"[0-9a-f]{32}"/ |
| |
| |
| |
| === TEST 44: empty x-request-id falls back to default generator |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: |
| --- wait: 2 |
| --- response_body |
| opentracing |
| --- no_error_log |
| [error] |
| |
| |
| |
| === TEST 45: empty x-request-id still exports a valid trace id |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/"traceId"\s*:\s*"[0-9a-f]{32}"/ |
| |
| |
| |
| === TEST 46: switch metadata trace_id_source back to random |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/plugin_metadata/opentelemetry', |
| ngx.HTTP_PUT, |
| [[{ |
| "batch_span_processor": { |
| "max_export_batch_size": 1, |
| "inactive_timeout": 0.5 |
| }, |
| "trace_id_source": "random", |
| "resource": { |
| "service.name": "APISIX" |
| }, |
| "collector": { |
| "address": "127.0.0.1:4318", |
| "request_timeout": 3 |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| |
| |
| |
| === TEST 47: after switching to random, send a valid 32-hex x-request-id |
| --- request |
| GET /opentracing |
| --- more_headers |
| X-Request-Id: 550e8400e29b41d4a716446655440000 |
| --- wait: 2 |
| --- response_body |
| opentracing |
| |
| |
| |
| === TEST 48: x-request-id must be ignored once trace_id_source is random |
| --- exec |
| tail -n 1 ci/pod/otelcol-contrib/data-otlp.json |
| --- response_body eval |
| qr/"traceId"\s*:\s*"(?!550e8400e29b41d4a716446655440000)[0-9a-f]{32}"/ |
| |
| |
| |
| === TEST 49: metadata_schema rejects non-scalar resource and collector.request_headers values |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local cases = { |
| {name = "object resource value", |
| body = [[{"resource":{"service.name":{"nested":"table"}}}]]}, |
| {name = "array resource value", |
| body = [[{"resource":{"service.name":["a","b"]}}]]}, |
| {name = "object request_headers value", |
| body = [[{"collector":{"address":"127.0.0.1:4318","request_headers":{"Authorization":{"a":1}}}}]]}, |
| } |
| for _, case in ipairs(cases) do |
| local code = t('/apisix/admin/plugin_metadata/opentelemetry', |
| ngx.HTTP_PUT, case.body) |
| if code ~= 400 then |
| ngx.say(case.name, ": expected 400, got ", code) |
| return |
| end |
| end |
| |
| -- scalars stay valid |
| local code = t('/apisix/admin/plugin_metadata/opentelemetry', ngx.HTTP_PUT, |
| [[{"resource":{"service.name":"APISIX","weight":1.5,"debug":true},]] .. |
| [["collector":{"address":"127.0.0.1:4318","request_headers":{"Authorization":"token"}}}]]) |
| if code >= 300 then |
| ngx.say("valid metadata rejected, got ", code) |
| return |
| end |
| ngx.say("passed") |
| } |
| } |
