| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| BEGIN { |
| if ($ENV{TEST_NGINX_CHECK_LEAK}) { |
| $SkipReason = "unavailable for the hup tests"; |
| |
| } else { |
| $ENV{TEST_NGINX_USE_HUP} = 1; |
| undef $ENV{TEST_NGINX_USE_STAP}; |
| } |
| } |
| |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| no_long_string(); |
| no_shuffle(); |
| no_root_location(); |
| |
| add_block_preprocessor(sub { |
| my ($block) = @_; |
| |
| if (!defined $block->request) { |
| $block->set_value("request", "GET /t"); |
| } |
| |
| my $http_config = $block->http_config // <<_EOC_; |
| server { |
| listen 11451; |
| gzip on; |
| gzip_types *; |
| gzip_min_length 1; |
| location /gzip_hello { |
| content_by_lua_block { |
| ngx.req.read_body() |
| local s = "hello world" |
| ngx.header['Content-Length'] = #s + 1 |
| ngx.say(s) |
| } |
| } |
| } |
| |
| server { |
| listen 11452; |
| location /brotli_hello { |
| content_by_lua_block { |
| ngx.req.read_body() |
| local s = "hello world hello world hello world" |
| ngx.header['Content-Length'] = #s + 1 |
| ngx.say(s) |
| } |
| header_filter_by_lua_block { |
| local conf = { |
| comp_level = 6, |
| http_version = 1.1, |
| lgblock = 0, |
| lgwin = 19, |
| min_length = 1, |
| mode = 0, |
| types = "*", |
| } |
| local brotli = require("apisix.plugins.brotli") |
| brotli.header_filter(conf, ngx.ctx) |
| } |
| body_filter_by_lua_block { |
| local conf = { |
| comp_level = 6, |
| http_version = 1.1, |
| lgblock = 0, |
| lgwin = 19, |
| min_length = 1, |
| mode = 0, |
| types = "*", |
| } |
| local brotli = require("apisix.plugins.brotli") |
| brotli.body_filter(conf, ngx.ctx) |
| } |
| } |
| } |
| |
| _EOC_ |
| |
| $block->set_value("http_config", $http_config); |
| }); |
| |
| run_tests; |
| |
| __DATA__ |
| |
| === TEST 1: set route use gzip upstream |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/gzip_hello", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:11451": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 2: should return gzip body |
| --- request |
| GET /gzip_hello |
| --- more_headers |
| Accept-Encoding: gzip |
| --- response_headers |
| Content-Encoding: gzip |
| |
| |
| |
| === TEST 3: set route use gzip upstream and response-rewrite body conf |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/gzip_hello", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:11451": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "body": "new body\n" |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 4: should rewrite body and clear Content-Encoding header |
| --- request |
| GET /gzip_hello |
| --- more_headers |
| Accept-Encoding: gzip |
| --- response_body |
| new body |
| --- response_headers |
| Content-Encoding: |
| |
| |
| |
| === TEST 5: set route use gzip upstream and response-rewrite filter conf |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/gzip_hello", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:11451": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "filters": [ |
| { |
| "regex": "hello", |
| "replace": "test" |
| } |
| ] |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 6: gzip decode support, should rewrite body and clear Content-Encoding header |
| --- request |
| GET /gzip_hello |
| --- more_headers |
| Accept-Encoding: gzip |
| --- response_body |
| test world |
| --- response_headers |
| Content-Encoding: |
| |
| |
| |
| === TEST 7: set route use response-write body conf, and mock unsupported compression encoding type |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/echo", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "body": "new body\n" |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 8: use body conf will ignore encoding, should rewrite body and clear Content-Encoding header |
| --- request |
| POST /echo |
| fake body with mock content encoding header |
| --- more_headers |
| Content-Encoding: deflate |
| --- response_body |
| new body |
| --- response_headers |
| Content-Encoding: |
| |
| |
| |
| === TEST 9: set route use response-write filter conf, and mock unsupported compression encoding type |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/echo", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "filters": [ |
| { |
| "regex": "hello", |
| "replace": "test" |
| } |
| ] |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 10: use filter conf will report unsupported encoding type error |
| --- request |
| POST /echo |
| fake body with mock content encoding header |
| --- more_headers |
| Content-Encoding: deflate |
| --- response_headers |
| Content-Encoding: |
| --- error_log |
| filters may not work as expected due to unsupported compression encoding type: deflate |
| |
| |
| |
| === TEST 11: set route use response-write plugin but not use filter conf or body conf |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/gzip_hello", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:11451": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "headers": { |
| "set": { |
| "X-Server-id": 3, |
| "X-Server-status": "on", |
| "Content-Type": "" |
| } |
| } |
| } |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 12: should keep Content-Encoding |
| --- request |
| GET /gzip_hello |
| --- more_headers |
| Accept-Encoding: gzip |
| --- response_headers |
| Content-Encoding: gzip |
| X-Server-id: 3 |
| X-Server-status: on |
| Content-Type: |
| |
| |
| |
| === TEST 13: response-write without filter conf or body conf, and mock unsupported compression encoding type |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/echo", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "headers": { |
| "set": { |
| "X-Server-id": 3, |
| "X-Server-status": "on", |
| "Content-Type": "" |
| } |
| } |
| } |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 14: should keep Content-Encoding |
| --- request |
| POST /echo |
| fake body with mock content encoding header |
| --- more_headers |
| Content-Encoding: deflate |
| --- response_headers |
| Content-Encoding: deflate |
| X-Server-id: 3 |
| X-Server-status: on |
| Content-Type: |
| |
| |
| |
| === TEST 15: set route use brotli upstream |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/brotli_hello", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:11452": 1 |
| }, |
| "type": "roundrobin" |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 16: should return brotli body |
| --- request |
| GET /brotli_hello |
| --- more_headers |
| Accept-Encoding: br |
| --- response_headers |
| Content-Encoding: br |
| |
| |
| |
| === TEST 17: set route use brotli upstream and response-rewrite body conf |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/brotli_hello", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:11452": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "body": "new body\n" |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 18: should rewrite body and clear Content-Encoding header |
| --- request |
| GET /brotli_hello |
| --- more_headers |
| Accept-Encoding: br |
| --- response_body |
| new body |
| --- response_headers |
| Content-Encoding: |
| |
| |
| |
| === TEST 19: set route use brotli upstream and response-rewrite filter conf |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/brotli_hello", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:11452": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "filters": [ |
| { |
| "regex": "hello", |
| "replace": "test" |
| } |
| ] |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 20: brotli decode support, should rewrite body and clear Content-Encoding header |
| --- request |
| GET /brotli_hello |
| --- more_headers |
| Accept-Encoding: br |
| --- response_body |
| test world hello world hello world |
| --- response_headers |
| Content-Encoding: |
| |
| |
| |
| === TEST 21: set route use response-write plugin but not use filter conf or body conf |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "uri": "/brotli_hello", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:11452": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "plugins": { |
| "response-rewrite": { |
| "vars": [ |
| ["status","==",200] |
| ], |
| "headers": { |
| "set": { |
| "X-Server-id": 3, |
| "X-Server-status": "on", |
| "Content-Type": "" |
| } |
| } |
| } |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 22: should keep Content-Encoding |
| --- request |
| GET /brotli_hello |
| --- more_headers |
| Accept-Encoding: br |
| --- response_headers |
| Content-Encoding: br |
| X-Server-id: 3 |
| X-Server-status: on |
| Content-Type: |
