| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| use t::APISIX 'no_plan'; |
| |
| log_level('debug'); |
| repeat_each(1); |
| no_long_string(); |
| no_root_location(); |
| no_shuffle(); |
| |
| add_block_preprocessor(sub { |
| my ($block) = @_; |
| |
| if ((!defined $block->error_log) && (!defined $block->no_error_log)) { |
| $block->set_value("no_error_log", "[error]"); |
| } |
| |
| if (!defined $block->request) { |
| $block->set_value("request", "GET /t"); |
| } |
| }); |
| |
| run_tests(); |
| |
| __DATA__ |
| |
| === TEST 1: Sanity check with minimal valid configuration. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.openid-connect") |
| local ok, err = plugin.check_schema({client_id = "a", client_secret = "b", discovery = "c"}) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- response_body |
| done |
| |
| |
| |
| === TEST 2: Missing `client_id`. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.openid-connect") |
| local ok, err = plugin.check_schema({client_secret = "b", discovery = "c"}) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- response_body |
| property "client_id" is required |
| done |
| |
| |
| |
| === TEST 3: Wrong type for `client_id`. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.openid-connect") |
| local ok, err = plugin.check_schema({client_id = 123, client_secret = "b", discovery = "c"}) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- response_body |
| property "client_id" validation failed: wrong type: expected string, got number |
| done |
| |
| |
| |
| === TEST 4: Set up new route with plugin matching URI `/hello`. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "client_id": "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| "client_secret": "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| "client_rsa_private_key": "89ae4c8edadf1cd1c9f034335f136f87ad84b625c8f1", |
| "discovery": "http://127.0.0.1:1980/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "ssl_verify": false, |
| "timeout": 10, |
| "scope": "apisix", |
| "use_pkce": false |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 5: verify encrypted field |
| --- config |
| location /t { |
| content_by_lua_block { |
| local json = require("toolkit.json") |
| local t = require("lib.test_admin").test |
| |
| |
| -- get plugin conf from etcd, client_rsa_private_key is encrypted |
| local etcd = require("apisix.core.etcd") |
| local res = assert(etcd.get('/routes/1')) |
| ngx.say(res.body.node.value.plugins["openid-connect"].client_rsa_private_key) |
| |
| } |
| } |
| --- response_body |
| qO8TJbXcxCUnkkaTs3PxWDk5a54lv7FmngKQaxuXV4cL+7Kp1R4D8NS4w88so4e+ |
| |
| |
| |
| === TEST 6: Access route w/o bearer token. Should redirect to authentication endpoint of ID provider. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, {method = "GET"}) |
| ngx.status = res.status |
| local location = res.headers['Location'] |
| if location and string.find(location, 'https://samples.auth0.com/authorize') ~= -1 and |
| string.find(location, 'scope=apisix') ~= -1 and |
| string.find(location, 'client_id=kbyuFDidLLm280LIwVFiazOqjO3ty8KH') ~= -1 and |
| string.find(location, 'response_type=code') ~= -1 and |
| string.find(location, 'redirect_uri=https://iresty.com') ~= -1 then |
| ngx.say(true) |
| end |
| } |
| } |
| --- timeout: 10s |
| --- response_body |
| true |
| --- error_code: 302 |
| |
| |
| |
| === TEST 7: Modify route to match catch-all URI `/*` and point plugin to local Keycloak instance. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "discovery": "http://127.0.0.1:8080/realms/University/.well-known/openid-configuration", |
| "realm": "University", |
| "client_id": "course_management", |
| "client_secret": "d1ec69e9-55d2-4109-a3ea-befa071579d5", |
| "redirect_uri": "http://127.0.0.1:]] .. ngx.var.server_port .. [[/authenticated", |
| "ssl_verify": false, |
| "timeout": 10, |
| "introspection_endpoint_auth_method": "client_secret_post", |
| "introspection_endpoint": "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token/introspect", |
| "set_access_token_header": true, |
| "access_token_in_authorization_header": false, |
| "set_id_token_header": true, |
| "set_userinfo_header": true, |
| "set_refresh_token_header": true |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/*" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 8: Access route w/o bearer token and go through the full OIDC Relying Party authentication process. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local login_keycloak = require("lib.keycloak").login_keycloak |
| local concatenate_cookies = require("lib.keycloak").concatenate_cookies |
| |
| local httpc = http.new() |
| |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/uri" |
| local res, err = login_keycloak(uri, "teacher@gmail.com", "123456") |
| if err then |
| ngx.status = 500 |
| ngx.say(err) |
| return |
| end |
| |
| local cookie_str = concatenate_cookies(res.headers['Set-Cookie']) |
| -- Make the final call back to the original URI. |
| local redirect_uri = "http://127.0.0.1:" .. ngx.var.server_port .. res.headers['Location'] |
| res, err = httpc:request_uri(redirect_uri, { |
| method = "GET", |
| headers = { |
| ["Cookie"] = cookie_str |
| } |
| }) |
| |
| if not res then |
| -- No response, must be an error. |
| ngx.status = 500 |
| ngx.say(err) |
| return |
| elseif res.status ~= 200 then |
| -- Not a valid response. |
| -- Use 500 to indicate error. |
| ngx.status = 500 |
| ngx.say("Invoking the original URI didn't return the expected result.") |
| return |
| end |
| |
| ngx.status = res.status |
| ngx.say(res.body) |
| } |
| } |
| --- response_body_like |
| uri: /uri |
| cookie: .* |
| host: 127.0.0.1:1984 |
| user-agent: .* |
| x-access-token: ey.* |
| x-id-token: ey.* |
| x-real-ip: 127.0.0.1 |
| x-refresh-token: ey.* |
| x-userinfo: ey.* |
| |
| |
| |
| === TEST 9: Re-configure plugin with respect to headers that get sent to upstream. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "discovery": "http://127.0.0.1:8080/realms/University/.well-known/openid-configuration", |
| "realm": "University", |
| "client_id": "course_management", |
| "client_secret": "d1ec69e9-55d2-4109-a3ea-befa071579d5", |
| "redirect_uri": "http://127.0.0.1:]] .. ngx.var.server_port .. [[/authenticated", |
| "ssl_verify": false, |
| "timeout": 10, |
| "introspection_endpoint_auth_method": "client_secret_post", |
| "introspection_endpoint": "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token/introspect", |
| "set_access_token_header": true, |
| "access_token_in_authorization_header": true, |
| "set_id_token_header": false, |
| "set_userinfo_header": false |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/*" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 10: Access route w/o bearer token and go through the full OIDC Relying Party authentication process. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local login_keycloak = require("lib.keycloak").login_keycloak |
| local concatenate_cookies = require("lib.keycloak").concatenate_cookies |
| |
| local httpc = http.new() |
| |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/uri" |
| local res, err = login_keycloak(uri, "teacher@gmail.com", "123456") |
| if err then |
| ngx.status = 500 |
| ngx.say(err) |
| return |
| end |
| |
| local cookie_str = concatenate_cookies(res.headers['Set-Cookie']) |
| -- Make the final call back to the original URI. |
| local redirect_uri = "http://127.0.0.1:" .. ngx.var.server_port .. res.headers['Location'] |
| res, err = httpc:request_uri(redirect_uri, { |
| method = "GET", |
| headers = { |
| ["Cookie"] = cookie_str |
| } |
| }) |
| |
| if not res then |
| -- No response, must be an error. |
| ngx.status = 500 |
| ngx.say(err) |
| return |
| elseif res.status ~= 200 then |
| -- Not a valid response. |
| -- Use 500 to indicate error. |
| ngx.status = 500 |
| ngx.say("Invoking the original URI didn't return the expected result.") |
| return |
| end |
| |
| ngx.status = res.status |
| ngx.say(res.body) |
| } |
| } |
| --- response_body_like |
| uri: /uri |
| authorization: Bearer ey.* |
| cookie: .* |
| host: 127.0.0.1:1984 |
| user-agent: .* |
| x-real-ip: 127.0.0.1 |
| |
| |
| |
| === TEST 11: Update plugin with `bearer_only=true`. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "client_id": "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| "client_secret": "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| "discovery": "https://samples.auth0.com/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "ssl_verify": false, |
| "timeout": 10, |
| "bearer_only": true, |
| "scope": "apisix" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 12: Access route w/o bearer token. Should return 401 (Unauthorized). |
| --- timeout: 10s |
| --- request |
| GET /hello |
| --- error_code: 401 |
| --- response_headers_like |
| WWW-Authenticate: Bearer realm="apisix" |
| --- error_log |
| OIDC introspection failed: No bearer token found in request. |
| |
| |
| |
| === TEST 13: Access route with invalid Authorization header value. Should return 400 (Bad Request). |
| --- timeout: 10s |
| --- request |
| GET /hello |
| --- more_headers |
| Authorization: foo |
| --- error_code: 400 |
| --- error_log |
| OIDC introspection failed: Invalid Authorization header format. |
| |
| |
| |
| === TEST 14: Update plugin with ID provider public key, so tokens can be validated locally. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ "plugins": { |
| "openid-connect": { |
| "client_id": "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| "client_secret": "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| "discovery": "https://samples.auth0.com/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "ssl_verify": false, |
| "timeout": 10, |
| "bearer_only": true, |
| "scope": "apisix", |
| "public_key": "-----BEGIN PUBLIC KEY-----\n]] .. |
| [[MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw86xcJwNxL2MkWnjIGiw\n]] .. |
| [[94QY78Sq89dLqMdV/Ku2GIX9lYkbS0VDGtmxDGJLBOYW4cKTX+pigJyzglLgE+nD\n]] .. |
| [[z3VJf2oCqSV74gTyEdi7sw9e1rCyR6dR8VA7LEpIHwmhnDhhjXy1IYSKRdiVHLS5\n]] .. |
| [[sYmaAGckpUo3MLqUrgydGj5tFzvK/R/ELuZBdlZM+XuWxYry05r860E3uL+VdVCO\n]] .. |
| [[oU4RJQknlJnTRd7ht8KKcZb6uM14C057i26zX/xnOJpaVflA4EyEo99hKQAdr8Sh\n]] .. |
| [[G70MOLYvGCZxl1o8S3q4X67MxcPlfJaXnbog2AOOGRaFar88XiLFWTbXMCLuz7xD\n]] .. |
| [[zQIDAQAB\n]] .. |
| [[-----END PUBLIC KEY-----", |
| "token_signing_alg_values_expected": "RS256", |
| "claim_validator": { |
| "issuer": { |
| "valid_issuers": ["Mysoft corp"] |
| } |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 15: Access route with valid token. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, { |
| method = "GET", |
| headers = { |
| ["Authorization"] = [[Bearer eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhMSI6IkRhdGEgMSIsImlhdCI6MTU4NTEyMjUwMiwiZXhwIjoxOTAwNjk4NTAyLCJhdWQiOiJodHRwOi8vbXlzb2Z0Y29ycC5pbiIsImlzcyI6Ik15c29mdCBjb3JwIiwic3ViIjoic29tZUB1c2VyLmNvbSJ9.Vq_sBN7nH67vMDbiJE01EP4hvJYE_5ju6izjkOX8pF5OS4g2RWKWpL6h6-b0tTkCzG4JD5BEl13LWW-Gxxw0i9vEK0FLg_kC_kZLYB8WuQ6B9B9YwzmZ3OLbgnYzt_VD7D-7psEbwapJl5hbFsIjDgOAEx-UCmjUcl2frZxZavG2LUiEGs9Ri7KqOZmTLgNDMWfeWh1t1LyD0_b-eTInbasVtKQxMlb5kR0Ln_Qg5092L-irJ7dqaZma7HItCnzXJROdqJEsMIBAYRwDGa_w5kIACeMOdU85QKtMHzOenYFkm6zh_s59ndziTctKMz196Y8AL08xuTi6d1gEWpM92A]] |
| } |
| }) |
| ngx.status = res.status |
| if res.status == 200 then |
| ngx.say(true) |
| end |
| } |
| } |
| --- response_body |
| true |
| |
| |
| |
| === TEST 16: Update route URI to '/uri' where upstream endpoint returns request headers in response body. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ "plugins": { |
| "openid-connect": { |
| "client_id": "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| "client_secret": "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| "discovery": "https://samples.auth0.com/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "ssl_verify": false, |
| "timeout": 10, |
| "bearer_only": true, |
| "scope": "apisix", |
| "public_key": "-----BEGIN PUBLIC KEY-----\n]] .. |
| [[MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw86xcJwNxL2MkWnjIGiw\n]] .. |
| [[94QY78Sq89dLqMdV/Ku2GIX9lYkbS0VDGtmxDGJLBOYW4cKTX+pigJyzglLgE+nD\n]] .. |
| [[z3VJf2oCqSV74gTyEdi7sw9e1rCyR6dR8VA7LEpIHwmhnDhhjXy1IYSKRdiVHLS5\n]] .. |
| [[sYmaAGckpUo3MLqUrgydGj5tFzvK/R/ELuZBdlZM+XuWxYry05r860E3uL+VdVCO\n]] .. |
| [[oU4RJQknlJnTRd7ht8KKcZb6uM14C057i26zX/xnOJpaVflA4EyEo99hKQAdr8Sh\n]] .. |
| [[G70MOLYvGCZxl1o8S3q4X67MxcPlfJaXnbog2AOOGRaFar88XiLFWTbXMCLuz7xD\n]] .. |
| [[zQIDAQAB\n]] .. |
| [[-----END PUBLIC KEY-----", |
| "token_signing_alg_values_expected": "RS256", |
| "claim_validator": { |
| "issuer": { |
| "valid_issuers": ["Mysoft corp"] |
| } |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/uri" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 17: Access route with valid token in `Authorization` header. Upstream should additionally get the token in the `X-Access-Token` header. |
| --- request |
| GET /uri HTTP/1.1 |
| --- more_headers |
| Authorization: Bearer eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhMSI6IkRhdGEgMSIsImlhdCI6MTU4NTEyMjUwMiwiZXhwIjoxOTAwNjk4NTAyLCJhdWQiOiJodHRwOi8vbXlzb2Z0Y29ycC5pbiIsImlzcyI6Ik15c29mdCBjb3JwIiwic3ViIjoic29tZUB1c2VyLmNvbSJ9.Vq_sBN7nH67vMDbiJE01EP4hvJYE_5ju6izjkOX8pF5OS4g2RWKWpL6h6-b0tTkCzG4JD5BEl13LWW-Gxxw0i9vEK0FLg_kC_kZLYB8WuQ6B9B9YwzmZ3OLbgnYzt_VD7D-7psEbwapJl5hbFsIjDgOAEx-UCmjUcl2frZxZavG2LUiEGs9Ri7KqOZmTLgNDMWfeWh1t1LyD0_b-eTInbasVtKQxMlb5kR0Ln_Qg5092L-irJ7dqaZma7HItCnzXJROdqJEsMIBAYRwDGa_w5kIACeMOdU85QKtMHzOenYFkm6zh_s59ndziTctKMz196Y8AL08xuTi6d1gEWpM92A |
| --- response_body_like |
| uri: /uri |
| authorization: Bearer eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhMSI6IkRhdGEgMSIsImlhdCI6MTU4NTEyMjUwMiwiZXhwIjoxOTAwNjk4NTAyLCJhdWQiOiJodHRwOi8vbXlzb2Z0Y29ycC5pbiIsImlzcyI6Ik15c29mdCBjb3JwIiwic3ViIjoic29tZUB1c2VyLmNvbSJ9.Vq_sBN7nH67vMDbiJE01EP4hvJYE_5ju6izjkOX8pF5OS4g2RWKWpL6h6-b0tTkCzG4JD5BEl13LWW-Gxxw0i9vEK0FLg_kC_kZLYB8WuQ6B9B9YwzmZ3OLbgnYzt_VD7D-7psEbwapJl5hbFsIjDgOAEx-UCmjUcl2frZxZavG2LUiEGs9Ri7KqOZmTLgNDMWfeWh1t1LyD0_b-eTInbasVtKQxMlb5kR0Ln_Qg5092L-irJ7dqaZma7HItCnzXJROdqJEsMIBAYRwDGa_w5kIACeMOdU85QKtMHzOenYFkm6zh_s59ndziTctKMz196Y8AL08xuTi6d1gEWpM92A |
| host: localhost |
| x-access-token: eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhMSI6IkRhdGEgMSIsImlhdCI6MTU4NTEyMjUwMiwiZXhwIjoxOTAwNjk4NTAyLCJhdWQiOiJodHRwOi8vbXlzb2Z0Y29ycC5pbiIsImlzcyI6Ik15c29mdCBjb3JwIiwic3ViIjoic29tZUB1c2VyLmNvbSJ9.Vq_sBN7nH67vMDbiJE01EP4hvJYE_5ju6izjkOX8pF5OS4g2RWKWpL6h6-b0tTkCzG4JD5BEl13LWW-Gxxw0i9vEK0FLg_kC_kZLYB8WuQ6B9B9YwzmZ3OLbgnYzt_VD7D-7psEbwapJl5hbFsIjDgOAEx-UCmjUcl2frZxZavG2LUiEGs9Ri7KqOZmTLgNDMWfeWh1t1LyD0_b-eTInbasVtKQxMlb5kR0Ln_Qg5092L-irJ7dqaZma7HItCnzXJROdqJEsMIBAYRwDGa_w5kIACeMOdU85QKtMHzOenYFkm6zh_s59ndziTctKMz196Y8AL08xuTi6d1gEWpM92A |
| x-real-ip: 127.0.0.1 |
| x-userinfo: ey.* |
| --- error_code: 200 |
| |
| |
| |
| === TEST 18: Update plugin to only use `Authorization` header. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ "plugins": { |
| "openid-connect": { |
| "client_id": "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| "client_secret": "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| "discovery": "https://samples.auth0.com/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "ssl_verify": false, |
| "timeout": 10, |
| "bearer_only": true, |
| "scope": "apisix", |
| "public_key": "-----BEGIN PUBLIC KEY-----\n]] .. |
| [[MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw86xcJwNxL2MkWnjIGiw\n]] .. |
| [[94QY78Sq89dLqMdV/Ku2GIX9lYkbS0VDGtmxDGJLBOYW4cKTX+pigJyzglLgE+nD\n]] .. |
| [[z3VJf2oCqSV74gTyEdi7sw9e1rCyR6dR8VA7LEpIHwmhnDhhjXy1IYSKRdiVHLS5\n]] .. |
| [[sYmaAGckpUo3MLqUrgydGj5tFzvK/R/ELuZBdlZM+XuWxYry05r860E3uL+VdVCO\n]] .. |
| [[oU4RJQknlJnTRd7ht8KKcZb6uM14C057i26zX/xnOJpaVflA4EyEo99hKQAdr8Sh\n]] .. |
| [[G70MOLYvGCZxl1o8S3q4X67MxcPlfJaXnbog2AOOGRaFar88XiLFWTbXMCLuz7xD\n]] .. |
| [[zQIDAQAB\n]] .. |
| [[-----END PUBLIC KEY-----", |
| "token_signing_alg_values_expected": "RS256", |
| "set_access_token_header": true, |
| "access_token_in_authorization_header": true, |
| "set_id_token_header": false, |
| "set_userinfo_header": false, |
| "claim_validator": { |
| "issuer": { |
| "valid_issuers": ["Mysoft corp"] |
| } |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/uri" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 19: Access route with valid token in `Authorization` header. Upstream should not get the additional `X-Access-Token` header. |
| --- request |
| GET /uri HTTP/1.1 |
| --- more_headers |
| Authorization: Bearer eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhMSI6IkRhdGEgMSIsImlhdCI6MTU4NTEyMjUwMiwiZXhwIjoxOTAwNjk4NTAyLCJhdWQiOiJodHRwOi8vbXlzb2Z0Y29ycC5pbiIsImlzcyI6Ik15c29mdCBjb3JwIiwic3ViIjoic29tZUB1c2VyLmNvbSJ9.Vq_sBN7nH67vMDbiJE01EP4hvJYE_5ju6izjkOX8pF5OS4g2RWKWpL6h6-b0tTkCzG4JD5BEl13LWW-Gxxw0i9vEK0FLg_kC_kZLYB8WuQ6B9B9YwzmZ3OLbgnYzt_VD7D-7psEbwapJl5hbFsIjDgOAEx-UCmjUcl2frZxZavG2LUiEGs9Ri7KqOZmTLgNDMWfeWh1t1LyD0_b-eTInbasVtKQxMlb5kR0Ln_Qg5092L-irJ7dqaZma7HItCnzXJROdqJEsMIBAYRwDGa_w5kIACeMOdU85QKtMHzOenYFkm6zh_s59ndziTctKMz196Y8AL08xuTi6d1gEWpM92A |
| --- response_body |
| uri: /uri |
| authorization: Bearer eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhMSI6IkRhdGEgMSIsImlhdCI6MTU4NTEyMjUwMiwiZXhwIjoxOTAwNjk4NTAyLCJhdWQiOiJodHRwOi8vbXlzb2Z0Y29ycC5pbiIsImlzcyI6Ik15c29mdCBjb3JwIiwic3ViIjoic29tZUB1c2VyLmNvbSJ9.Vq_sBN7nH67vMDbiJE01EP4hvJYE_5ju6izjkOX8pF5OS4g2RWKWpL6h6-b0tTkCzG4JD5BEl13LWW-Gxxw0i9vEK0FLg_kC_kZLYB8WuQ6B9B9YwzmZ3OLbgnYzt_VD7D-7psEbwapJl5hbFsIjDgOAEx-UCmjUcl2frZxZavG2LUiEGs9Ri7KqOZmTLgNDMWfeWh1t1LyD0_b-eTInbasVtKQxMlb5kR0Ln_Qg5092L-irJ7dqaZma7HItCnzXJROdqJEsMIBAYRwDGa_w5kIACeMOdU85QKtMHzOenYFkm6zh_s59ndziTctKMz196Y8AL08xuTi6d1gEWpM92A |
| host: localhost |
| x-real-ip: 127.0.0.1 |
| --- error_code: 200 |
| |
| |
| |
| === TEST 20: Switch route URI back to `/hello`. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ "plugins": { |
| "openid-connect": { |
| "client_id": "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| "client_secret": "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| "discovery": "https://samples.auth0.com/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "ssl_verify": false, |
| "timeout": 10, |
| "bearer_only": true, |
| "scope": "apisix", |
| "public_key": "-----BEGIN PUBLIC KEY-----\n]] .. |
| [[MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAw86xcJwNxL2MkWnjIGiw\n]] .. |
| [[94QY78Sq89dLqMdV/Ku2GIX9lYkbS0VDGtmxDGJLBOYW4cKTX+pigJyzglLgE+nD\n]] .. |
| [[z3VJf2oCqSV74gTyEdi7sw9e1rCyR6dR8VA7LEpIHwmhnDhhjXy1IYSKRdiVHLS5\n]] .. |
| [[sYmaAGckpUo3MLqUrgydGj5tFzvK/R/ELuZBdlZM+XuWxYry05r860E3uL+VdVCO\n]] .. |
| [[oU4RJQknlJnTRd7ht8KKcZb6uM14C057i26zX/xnOJpaVflA4EyEo99hKQAdr8Sh\n]] .. |
| [[G70MOLYvGCZxl1o8S3q4X67MxcPlfJaXnbog2AOOGRaFar88XiLFWTbXMCLuz7xD\n]] .. |
| [[zQIDAQAB\n]] .. |
| [[-----END PUBLIC KEY-----", |
| "token_signing_alg_values_expected": "RS256", |
| "claim_validator": { |
| "issuer": { |
| "valid_issuers": ["Mysoft corp"] |
| } |
| } |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 21: Access route with invalid token. Should return 401. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, { |
| method = "GET", |
| headers = { |
| ["Authorization"] = "Bearer eyJhbGciOiJSUzI1NiIsInR5cCI6IkpXVCJ9" .. |
| ".eyJkYXRhMSI6IkRhdGEgMSIsImlhdCI6MTU4NTEyMjUwMiwiZXhwIjoxOTAwNjk" .. |
| "4NTAyLCJhdWQiOiJodHRwOi8vbXlzb2Z0Y29ycC5pbiIsImlzcyI6Ik15c29mdCB" .. |
| "jb3JwIiwic3ViIjoic29tZUB1c2VyLmNvbSJ9.u1ISx7JbuK_GFRIUqIMP175FqX" .. |
| "RyF9V7y86480Q4N3jNxs3ePbc51TFtIHDrKttstU4Tub28PYVSlr-HXfjo7", |
| } |
| }) |
| ngx.status = res.status |
| if res.status == 200 then |
| ngx.say(true) |
| end |
| } |
| } |
| --- error_code: 401 |
| --- error_log |
| jwt signature verification failed |
| |
| |
| |
| === TEST 22: Update route with Keycloak introspection endpoint and public key removed. Should now invoke introspection endpoint to validate tokens. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "client_id": "course_management", |
| "client_secret": "d1ec69e9-55d2-4109-a3ea-befa071579d5", |
| "discovery": "http://127.0.0.1:8080/realms/University/.well-known/openid-configuration", |
| "redirect_uri": "http://localhost:3000", |
| "ssl_verify": false, |
| "timeout": 10, |
| "bearer_only": true, |
| "realm": "University", |
| "introspection_endpoint_auth_method": "client_secret_post", |
| "introspection_endpoint": "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token/introspect" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 23: Obtain valid token and access route with it. |
| --- config |
| location /t { |
| content_by_lua_block { |
| -- Obtain valid access token from Keycloak using known username and password. |
| local json_decode = require("toolkit.json").decode |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token" |
| local res, err = httpc:request_uri(uri, { |
| method = "POST", |
| body = "grant_type=password&client_id=course_management&client_secret=d1ec69e9-55d2-4109-a3ea-befa071579d5&username=teacher@gmail.com&password=123456", |
| headers = { |
| ["Content-Type"] = "application/x-www-form-urlencoded" |
| } |
| }) |
| |
| -- Check response from keycloak and fail quickly if there's no response. |
| if not res then |
| ngx.say(err) |
| return |
| end |
| |
| -- Check if response code was ok. |
| if res.status == 200 then |
| -- Get access token from JSON response body. |
| local body = json_decode(res.body) |
| local accessToken = body["access_token"] |
| |
| -- Access route using access token. Should work. |
| uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, { |
| method = "GET", |
| headers = { |
| ["Authorization"] = "Bearer " .. body["access_token"] |
| } |
| }) |
| |
| if res.status == 200 then |
| -- Route accessed successfully. |
| ngx.say(true) |
| else |
| -- Couldn't access route. |
| ngx.say(false) |
| end |
| else |
| -- Response from Keycloak not ok. |
| ngx.say(false) |
| end |
| } |
| } |
| --- response_body |
| true |
| --- grep_error_log eval |
| qr/token validate successfully by \w+/ |
| --- grep_error_log_out |
| token validate successfully by introspection |
| |
| |
| |
| === TEST 24: Access route with an invalid token. |
| --- config |
| location /t { |
| content_by_lua_block { |
| -- Access route using a fake access token. |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, { |
| method = "GET", |
| headers = { |
| ["Authorization"] = "Bearer " .. "fake access token", |
| } |
| }) |
| |
| if res.status == 200 then |
| ngx.say(true) |
| else |
| ngx.say(false) |
| end |
| } |
| } |
| --- response_body |
| false |
| --- error_log |
| OIDC introspection failed: invalid token |
| |
| |
| |
| === TEST 25: Check defaults. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local json = require("t.toolkit.json") |
| local plugin = require("apisix.plugins.openid-connect") |
| local s = { |
| client_id = "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| client_secret = "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| discovery = "http://127.0.0.1:1980/.well-known/openid-configuration", |
| } |
| local ok, err = plugin.check_schema(s) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| -- ensure session secret generated when bearer_only = false |
| -- then remove it from table, because it's a random value that I cannot verify it by response body |
| assert(s.session and s.session.secret, "no session secret generated") |
| s.session = nil |
| |
| ngx.say(json.encode(s)) |
| } |
| } |
| --- response_body |
| {"accept_none_alg":false,"accept_unsupported_alg":true,"access_token_expires_leeway":0,"access_token_in_authorization_header":false,"bearer_only":false,"client_id":"kbyuFDidLLm280LIwVFiazOqjO3ty8KH","client_jwt_assertion_expires_in":60,"client_secret":"60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa","discovery":"http://127.0.0.1:1980/.well-known/openid-configuration","force_reauthorize":false,"iat_slack":120,"introspection_endpoint_auth_method":"client_secret_basic","introspection_interval":0,"jwk_expires_in":86400,"jwt_verification_cache_ignore":false,"logout_path":"/logout","realm":"apisix","renew_access_token_on_expiry":true,"revoke_tokens_on_logout":false,"scope":"openid","set_access_token_header":true,"set_id_token_header":true,"set_refresh_token_header":false,"set_userinfo_header":true,"ssl_verify":false,"timeout":3,"token_endpoint_auth_method":"client_secret_basic","unauth_action":"auth","use_nonce":false,"use_pkce":false} |
| |
| |
| |
| === TEST 26: Update plugin with ID provider jwks endpoint for token verification. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "client_id": "course_management", |
| "client_secret": "d1ec69e9-55d2-4109-a3ea-befa071579d5", |
| "discovery": "http://127.0.0.1:8080/realms/University/.well-known/openid-configuration", |
| "redirect_uri": "http://localhost:3000", |
| "ssl_verify": false, |
| "timeout": 10, |
| "bearer_only": true, |
| "use_jwks": true, |
| "realm": "University", |
| "introspection_endpoint_auth_method": "client_secret_post", |
| "introspection_endpoint": "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token/introspect" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 27: Obtain valid token and access route with it. |
| --- config |
| location /t { |
| content_by_lua_block { |
| -- Obtain valid access token from Keycloak using known username and password. |
| local json_decode = require("toolkit.json").decode |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token" |
| local res, err = httpc:request_uri(uri, { |
| method = "POST", |
| body = "grant_type=password&client_id=course_management&client_secret=d1ec69e9-55d2-4109-a3ea-befa071579d5&username=teacher@gmail.com&password=123456", |
| headers = { |
| ["Content-Type"] = "application/x-www-form-urlencoded" |
| } |
| }) |
| |
| -- Check response from keycloak and fail quickly if there's no response. |
| if not res then |
| ngx.say(err) |
| return |
| end |
| |
| -- Check if response code was ok. |
| if res.status == 200 then |
| -- Get access token from JSON response body. |
| local body = json_decode(res.body) |
| local accessToken = body["access_token"] |
| |
| -- Access route using access token. Should work. |
| uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, { |
| method = "GET", |
| headers = { |
| ["Authorization"] = "Bearer " .. body["access_token"] |
| } |
| }) |
| |
| if res.status == 200 then |
| -- Route accessed successfully. |
| ngx.say(true) |
| else |
| -- Couldn't access route. |
| ngx.say(false) |
| end |
| else |
| -- Response from Keycloak not ok. |
| ngx.say(false) |
| end |
| } |
| } |
| --- response_body |
| true |
| --- grep_error_log eval |
| qr/token validate successfully by \w+/ |
| --- grep_error_log_out |
| token validate successfully by jwks |
| |
| |
| |
| === TEST 28: Access route with an invalid token. |
| --- config |
| location /t { |
| content_by_lua_block { |
| -- Access route using a fake access token. |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, { |
| method = "GET", |
| headers = { |
| ["Authorization"] = "Bearer " .. "fake access token", |
| } |
| }) |
| |
| if res.status == 200 then |
| ngx.say(true) |
| else |
| ngx.say(false) |
| end |
| } |
| } |
| --- response_body |
| false |
| --- error_log |
| OIDC introspection failed: invalid jwt: invalid jwt string |
| |
| |
| |
| === TEST 29: Modify route to match catch-all URI `/*` and add post_logout_redirect_uri option. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "discovery": "http://127.0.0.1:8080/realms/University/.well-known/openid-configuration", |
| "realm": "University", |
| "client_id": "course_management", |
| "client_secret": "d1ec69e9-55d2-4109-a3ea-befa071579d5", |
| "redirect_uri": "http://127.0.0.1:]] .. ngx.var.server_port .. [[/authenticated", |
| "ssl_verify": false, |
| "timeout": 10, |
| "introspection_endpoint_auth_method": "client_secret_post", |
| "introspection_endpoint": "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token/introspect", |
| "set_access_token_header": true, |
| "access_token_in_authorization_header": false, |
| "set_id_token_header": true, |
| "set_userinfo_header": true, |
| "post_logout_redirect_uri": "http://127.0.0.1:]] .. ngx.var.server_port .. [[/hello" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/*" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 30: Access route w/o bearer token and request logout to redirect to post_logout_redirect_uri. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local login_keycloak = require("lib.keycloak").login_keycloak |
| local concatenate_cookies = require("lib.keycloak").concatenate_cookies |
| |
| local httpc = http.new() |
| |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/uri" |
| local res, err = login_keycloak(uri, "teacher@gmail.com", "123456") |
| if err then |
| ngx.status = 500 |
| ngx.say(err) |
| return |
| end |
| |
| local cookie_str = concatenate_cookies(res.headers['Set-Cookie']) |
| |
| -- Request the logout uri with the log-in cookie |
| local logout_uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/logout" |
| res, err = httpc:request_uri(logout_uri, { |
| method = "GET", |
| headers = { |
| ["Cookie"] = cookie_str |
| } |
| }) |
| if not res then |
| -- No response, must be an error |
| -- Use 500 to indicate error |
| ngx.status = 500 |
| ngx.say(err) |
| return |
| elseif res.status ~= 302 then |
| ngx.status = 500 |
| ngx.say("Request the logout URI didn't return the expected status.") |
| return |
| end |
| |
| -- Request the location, it's a URL of keycloak and contains the post_logout_redirect_uri |
| -- Like: |
| -- http://127.0.0.1:8080/realms/University/protocol/openid-connect/logout?post_logout_redirect=http://127.0.0.1:1984/hello |
| local location = res.headers["Location"] |
| res, err = httpc:request_uri(location, { |
| method = "GET" |
| }) |
| if not res then |
| ngx.status = 500 |
| ngx.say(err) |
| return |
| elseif res.status ~= 302 then |
| ngx.status = 500 |
| ngx.say("Request the keycloak didn't return the expected status.") |
| return |
| end |
| |
| ngx.status = 200 |
| ngx.say(res.headers["Location"]) |
| } |
| } |
| --- response_body_like |
| http://127.0.0.1:.*/hello |
| |
| |
| |
| === TEST 31: Switch route URI back to `/hello` and enable pkce. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "client_id": "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| "client_secret": "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| "discovery": "http://127.0.0.1:1980/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "ssl_verify": false, |
| "timeout": 10, |
| "scope": "apisix", |
| "use_pkce": true |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 32: Access route w/o bearer token. Should redirect to authentication endpoint of ID provider with code_challenge parameters. |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, {method = "GET"}) |
| ngx.status = res.status |
| local location = res.headers['Location'] |
| if location and string.find(location, 'https://samples.auth0.com/authorize') ~= -1 and |
| string.find(location, 'scope=apisix') ~= -1 and |
| string.find(location, 'client_id=kbyuFDidLLm280LIwVFiazOqjO3ty8KH') ~= -1 and |
| string.find(location, 'response_type=code') ~= -1 and |
| string.find(location, 'redirect_uri=https://iresty.com') ~= -1 and |
| string.match(location, '.*code_challenge=.*') and |
| string.match(location, '.*code_challenge_method=S256.*') then |
| ngx.say(true) |
| end |
| } |
| } |
| --- timeout: 10s |
| --- response_body |
| true |
| --- error_code: 302 |
| |
| |
| |
| === TEST 33: set use_jwks and set_userinfo_header to validate "x-userinfo" in request header |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "client_id": "course_management", |
| "client_secret": "d1ec69e9-55d2-4109-a3ea-befa071579d5", |
| "discovery": "http://127.0.0.1:8080/realms/University/.well-known/openid-configuration", |
| "realm": "University", |
| "bearer_only": true, |
| "access_token_in_authorization_header": true, |
| "set_userinfo_header": true, |
| "use_jwks": true, |
| "redirect_uri": "http://localhost:3000", |
| "ssl_verify": false, |
| "timeout": 10, |
| "introspection_endpoint_auth_method": "client_secret_post", |
| "introspection_endpoint": "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token/introspect" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/*" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 34: Access route to validate "x-userinfo" in request header |
| --- config |
| location /t { |
| content_by_lua_block { |
| -- Obtain valid access token from Keycloak using known username and password. |
| local json_decode = require("toolkit.json").decode |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token" |
| local res, err = httpc:request_uri(uri, { |
| method = "POST", |
| body = "grant_type=password&client_id=course_management&client_secret=d1ec69e9-55d2-4109-a3ea-befa071579d5&username=teacher@gmail.com&password=123456", |
| headers = { |
| ["Content-Type"] = "application/x-www-form-urlencoded" |
| } |
| }) |
| |
| -- Check response from keycloak and fail quickly if there's no response. |
| if not res then |
| ngx.say(err) |
| return |
| end |
| |
| -- Check if response code was ok. |
| if res.status == 200 then |
| -- Get access token from JSON response body. |
| local body = json_decode(res.body) |
| local accessToken = body["access_token"] |
| |
| -- Access route using access token. Should work. |
| uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/uri" |
| local res, err = httpc:request_uri(uri, { |
| method = "GET", |
| headers = { |
| ["Authorization"] = "Bearer " .. body["access_token"] |
| } |
| }) |
| |
| if not res then |
| -- No response, must be an error. |
| ngx.status = 500 |
| ngx.say(err) |
| return |
| elseif res.status ~= 200 then |
| -- Not a valid response. |
| -- Use 500 to indicate error. |
| ngx.status = 500 |
| ngx.say("Invoking the original URI didn't return the expected result.") |
| return |
| end |
| |
| ngx.status = res.status |
| ngx.say(res.body) |
| |
| else |
| -- Response from Keycloak not ok. |
| ngx.say(false) |
| end |
| } |
| } |
| --- response_body_like |
| x-userinfo: ey.* |
| |
| |
| |
| === TEST 35: Set up new route with plugin matching URI `/*` |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ "plugins": { |
| "openid-connect": { |
| "client_id": "kbyuFDidLLm280LIwVFiazOqjO3ty8KH", |
| "client_secret": "60Op4HFM0I8ajz0WdiStAbziZ-VFQttXuxixHHs2R7r7-CW8GR79l-mmLqMhc-Sa", |
| "discovery": "https://samples.auth0.com/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "post_logout_redirect_uri": "https://iresty.com", |
| "scope": "openid profile" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/*" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 36: Check whether auth0 can redirect normally using post_logout_redirect_uri configuration |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/logout" |
| local res, err = httpc:request_uri(uri, {method = "GET"}) |
| ngx.status = res.status |
| local location = res.headers['Location'] |
| if location and string.find(location, 'https://iresty.com') ~= -1 and |
| string.find(location, 'post_logout_redirect_uri=https://iresty.com') ~= -1 then |
| ngx.say(true) |
| end |
| } |
| } |
| --- timeout: 10s |
| --- response_body |
| true |
| --- error_code: 302 |
| |
| |
| |
| === TEST 37: Set up new route with plugin matching URI `/*` |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ "plugins": { |
| "openid-connect": { |
| "client_id": "942299072001-vhduu1uljmdhhbbp7g22m3qsmo246a75.apps.googleusercontent.com", |
| "client_secret": "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", |
| "discovery": "https://accounts.google.com/.well-known/openid-configuration", |
| "redirect_uri": "https://iresty.com", |
| "post_logout_redirect_uri": "https://iresty.com", |
| "scope": "openid profile" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/*" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 38: Check whether google can redirect normally using post_logout_redirect_uri configuration |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/logout" |
| local res, err = httpc:request_uri(uri, {method = "GET"}) |
| ngx.status = res.status |
| local location = res.headers['Location'] |
| if location and string.find(location, 'https://iresty.com') ~= -1 and |
| string.find(location, 'post_logout_redirect_uri=https://iresty.com') ~= -1 then |
| ngx.say(true) |
| end |
| } |
| } |
| --- timeout: 10s |
| --- response_body |
| true |
| --- error_code: 302 |
| |
| |
| |
| === TEST 39: Update plugin config to use_jwk and bear_only false |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "openid-connect": { |
| "client_id": "course_management", |
| "client_secret": "d1ec69e9-55d2-4109-a3ea-befa071579d5", |
| "discovery": "http://127.0.0.1:8080/realms/University/.well-known/openid-configuration", |
| "redirect_uri": "http://localhost:3000", |
| "ssl_verify": false, |
| "timeout": 10, |
| "bearer_only": false, |
| "use_jwks": true, |
| "realm": "University", |
| "introspection_endpoint_auth_method": "client_secret_post", |
| "introspection_endpoint": "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token/introspect" |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 40: Test that jwt with bearer_only false still allows a valid Authorization header |
| --- config |
| location /t { |
| content_by_lua_block { |
| -- Obtain valid access token from Keycloak using known username and password. |
| local json_decode = require("toolkit.json").decode |
| local http = require "resty.http" |
| local httpc = http.new() |
| local uri = "http://127.0.0.1:8080/realms/University/protocol/openid-connect/token" |
| local res, err = httpc:request_uri(uri, { |
| method = "POST", |
| body = "grant_type=password&client_id=course_management&client_secret=d1ec69e9-55d2-4109-a3ea-befa071579d5&username=teacher@gmail.com&password=123456", |
| headers = { |
| ["Content-Type"] = "application/x-www-form-urlencoded" |
| } |
| }) |
| |
| -- Check response from keycloak and fail quickly if there's no response. |
| if not res then |
| ngx.say(err) |
| return |
| end |
| |
| -- Check if response code was ok. |
| if res.status == 200 then |
| -- Get access token from JSON response body. |
| local body = json_decode(res.body) |
| local accessToken = body["access_token"] |
| |
| -- Access route using access token. Should work. |
| uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local res, err = httpc:request_uri(uri, { |
| method = "GET", |
| headers = { |
| ["Authorization"] = "Bearer " .. body["access_token"] |
| } |
| }) |
| |
| if res.status == 200 then |
| -- Route accessed successfully. |
| ngx.say(true) |
| else |
| -- Couldn't access route. |
| ngx.say(false) |
| end |
| else |
| -- Response from Keycloak not ok. |
| ngx.say(false) |
| end |
| } |
| } |
| --- response_body |
| true |
| --- grep_error_log eval |
| qr/token validate successfully by \w+/ |
| --- grep_error_log_out |
| token validate successfully by jwks |
