| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| BEGIN { |
| if ($ENV{TEST_NGINX_CHECK_LEAK}) { |
| $SkipReason = "unavailable for the hup tests"; |
| |
| } else { |
| $ENV{TEST_NGINX_USE_HUP} = 1; |
| undef $ENV{TEST_NGINX_USE_STAP}; |
| } |
| } |
| |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| no_long_string(); |
| no_shuffle(); |
| no_root_location(); |
| |
| run_tests; |
| |
| __DATA__ |
| |
| === TEST 1: sanity |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.limit-req") |
| local ok, err = plugin.check_schema({ |
| rate = 1, |
| burst = 0, |
| rejected_code = 503, |
| key = 'remote_addr', |
| policy = 'redis', |
| redis_host = '127.0.0.1' |
| }) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| done |
| |
| |
| |
| === TEST 2: add plugin with redis cluster with ssl |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-req": { |
| "rate": 4, |
| "burst": 1, |
| "rejected_code": 503, |
| "key": "remote_addr", |
| "policy": "redis-cluster", |
| "redis_cluster_name": "test", |
| "redis_cluster_nodes": [ |
| "127.0.0.1:7000", |
| "127.0.0.1:7001", |
| "127.0.0.1:7002" |
| ], |
| "redis_cluster_ssl": true, |
| "redis_cluster_ssl_verify": false |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "desc": "upstream_node", |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 3: not exceeding the burst |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 200] |
| |
| |
| |
| === TEST 4: exceeding the burst |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello", "GET /hello", "GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 200, 200, 200, 200, 200, 200, 503] |
| |
| |
| |
| === TEST 5: update plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-req": { |
| "rate": 0.1, |
| "burst": 0.1, |
| "rejected_code": 503, |
| "key": "remote_addr", |
| "policy": "redis-cluster", |
| "redis_cluster_name": "test", |
| "redis_cluster_nodes": [ |
| "127.0.0.1:5000", |
| "127.0.0.1:5002" |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 6: exceeding the burst |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 503, 503, 503] |
| |
| |
| |
| === TEST 7: wrong type |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-req": { |
| "rate": -1, |
| "burst": 0.1, |
| "rejected_code": 503, |
| "key": "remote_addr", |
| "policy": "redis-cluster", |
| "redis_cluster_name": "test", |
| "redis_cluster_nodes": [ |
| "127.0.0.1:5000", |
| "127.0.0.1:5002" |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.print(body) |
| } |
| } |
| --- request |
| GET /t |
| --- error_code: 400 |
| --- response_body |
| {"error_msg":"failed to check the configuration of plugin limit-req err: property \"rate\" validation failed: expected -1 to be greater than 0"} |
| |
| |
| |
| === TEST 8: disable plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 9: exceeding the burst |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- error_code eval |
| [200, 200, 200, 200] |
| |
| |
| |
| === TEST 10: set route (key: server_addr) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-req": { |
| "rate": 4, |
| "burst": 2, |
| "rejected_code": 503, |
| "key": "server_addr", |
| "policy": "redis-cluster", |
| "redis_cluster_name": "test", |
| "redis_cluster_nodes": [ |
| "127.0.0.1:5000", |
| "127.0.0.1:5002" |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "desc": "upstream_node", |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 11: default rejected_code |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-req": { |
| "rate": 4, |
| "burst": 2, |
| "key": "remote_addr", |
| "policy": "redis-cluster", |
| "redis_cluster_name": "test", |
| "redis_cluster_nodes": [ |
| "127.0.0.1:5000", |
| "127.0.0.1:5002" |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "desc": "upstream_node", |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 12: consumer binds the limit-req plugin and `key` is `consumer_name` |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/consumers', |
| ngx.HTTP_PUT, |
| [[{ |
| "username": "new_consumer", |
| "plugins": { |
| "key-auth": { |
| "key": "auth-jack" |
| }, |
| "limit-req": { |
| "rate": 3, |
| "burst": 2, |
| "rejected_code": 403, |
| "key": "consumer_name", |
| "policy": "redis-cluster", |
| "redis_cluster_name": "test", |
| "redis_cluster_nodes": [ |
| "127.0.0.1:5000", |
| "127.0.0.1:5002" |
| ] |
| } |
| } |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 13: route add "key-auth" plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "key-auth": {} |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "desc": "upstream_node", |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 14: not exceeding the burst |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello"] |
| --- more_headers |
| apikey: auth-jack |
| --- error_code eval |
| [200, 200, 200] |
| |
| |
| |
| === TEST 15: update the limit-req plugin |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/consumers', |
| ngx.HTTP_PUT, |
| [[{ |
| "username": "new_consumer", |
| "plugins": { |
| "key-auth": { |
| "key": "auth-jack" |
| }, |
| "limit-req": { |
| "rate": 0.1, |
| "burst": 0.1, |
| "rejected_code": 403, |
| "key": "consumer_name", |
| "policy": "redis-cluster", |
| "redis_cluster_name": "test", |
| "redis_cluster_nodes": [ |
| "127.0.0.1:5000", |
| "127.0.0.1:5002" |
| ] |
| } |
| } |
| }]] |
| ) |
| |
| ngx.status = code |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 16: exceeding the burst |
| --- pipelined_requests eval |
| ["GET /hello", "GET /hello", "GET /hello", "GET /hello"] |
| --- more_headers |
| apikey: auth-jack |
| --- error_code eval |
| [403, 403, 403, 403] |
| |
| |
| |
| === TEST 17: key is consumer_name |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "limit-req": { |
| "rate": 2, |
| "burst": 1, |
| "key": "consumer_name", |
| "policy": "redis-cluster", |
| "redis_cluster_name": "test", |
| "redis_cluster_nodes": [ |
| "127.0.0.1:5000", |
| "127.0.0.1:5002" |
| ] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "desc": "upstream_node", |
| "uri": "/hello" |
| }]] |
| ) |
| |
| if code >= 300 then |
| ngx.status = code |
| end |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 18: get "consumer_name" is empty |
| --- request |
| GET /hello |
| --- response_body |
| hello world |
| --- error_log |
| The value of the configured key is empty, use client IP instead |
| |
| |
| |
| === TEST 19: delete consumer |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/consumers/new_consumer', ngx.HTTP_DELETE) |
| |
| ngx.status = code |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 20: delete route |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', ngx.HTTP_DELETE) |
| |
| ngx.status =code |
| ngx.say(body) |
| } |
| } |
| --- request |
| GET /t |
| --- response_body |
| passed |
| |
| |
| |
| === TEST 21: check_schema failed (the `rate` attribute is equal to 0) |
| --- config |
| location /t { |
| content_by_lua_block { |
| local plugin = require("apisix.plugins.limit-req") |
| local ok, err = plugin.check_schema({rate = 0, burst = 0, rejected_code = 503, key = 'remote_addr'}) |
| if not ok then |
| ngx.say(err) |
| end |
| |
| ngx.say("done") |
| } |
| } |
| --- request |
| GET /t |
| --- response_body eval |
| qr/property \"rate\" validation failed: expected 0 to be greater than 0/ |
