| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| use t::APISIX; |
| |
| my $nginx_binary = $ENV{'TEST_NGINX_BINARY'} || 'nginx'; |
| my $version = eval { `$nginx_binary -V 2>&1` }; |
| |
| if ($version !~ m/\/apisix-nginx-module/) { |
| plan(skip_all => "apisix-nginx-module not installed"); |
| } else { |
| plan('no_plan'); |
| } |
| |
| repeat_each(1); |
| log_level('info'); |
| worker_connections(256); |
| no_root_location(); |
| no_shuffle(); |
| |
| add_block_preprocessor(sub { |
| my ($block) = @_; |
| |
| if ((!defined $block->error_log) && (!defined $block->no_error_log)) { |
| $block->set_value("no_error_log", "[error]"); |
| } |
| |
| if (!defined $block->request) { |
| $block->set_value("request", "GET /t"); |
| } |
| |
| if (!defined $block->extra_init_by_lua) { |
| my $extra_init_by_lua = <<_EOC_; |
| local apisix = require("apisix") |
| apisix.http_header_filter_phase = function () |
| ngx.header.content_length = 14 |
| end |
| |
| apisix.http_body_filter_phase = function () |
| ngx.arg[1] = "do body filter" |
| end |
| _EOC_ |
| |
| $block->set_value("extra_init_by_lua", $extra_init_by_lua); |
| } |
| }); |
| |
| run_tests(); |
| |
| __DATA__ |
| |
| === TEST 1: enable skip body filter |
| --- extra_init_by_lua |
| local apisix = require("apisix") |
| apisix.http_header_filter_phase = function () |
| ngx.header.content_length = nil |
| end |
| |
| apisix.http_body_filter_phase = function () |
| ngx.arg[1] = "do body filter" |
| end |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| local http = require "resty.http" |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local httpc = http.new() |
| local res, err = httpc:request_uri(uri) |
| assert(res.status == 200) |
| if not res then |
| ngx.log(ngx.ERR, err) |
| return |
| end |
| ngx.print(res.body) |
| } |
| } |
| --- response_body |
| hello world |
| |
| |
| |
| === TEST 2: route with plugin_config_id, disable skip body filter |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/plugin_configs/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "serverless-pre-function": { |
| "phase": "before_proxy", |
| "functions" : ["return function(conf, ctx) ngx.log(ngx.WARN, \"run before_proxy phase balancer_ip : \", ctx.balancer_ip) end"] |
| } |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugin_config_id": "1", |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| |
| local http = require "resty.http" |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local httpc = http.new() |
| local res, err = httpc:request_uri(uri) |
| assert(res.status == 200) |
| if not res then |
| ngx.log(ngx.ERR, err) |
| return |
| end |
| ngx.say(res.body) |
| } |
| } |
| --- response_body |
| do body filter |
| --- error_log |
| run before_proxy phase balancer_ip : 127.0.0.1 |
| --- no_error_log |
| enable sample upstream |
| |
| |
| |
| === TEST 3: route with plugins, disable skip body filter |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/consumers', |
| ngx.HTTP_PUT, |
| [[{ |
| "username": "new_consumer", |
| "plugins": { |
| "key-auth": { |
| "key": "auth-jack" |
| }, |
| "serverless-pre-function": { |
| "phase": "before_proxy", |
| "functions" : ["return function(conf, ctx) ngx.log(ngx.WARN, \"run before_proxy phase balancer_ip : \", ctx.balancer_ip) end"] |
| } |
| } |
| }]] |
| ) |
| ngx.sleep(0.5) |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "key-auth": {} |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| |
| local http = require "resty.http" |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local httpc = http.new() |
| local headers = { |
| ["apikey"] = "auth-jack" |
| } |
| local res, err = httpc:request_uri(uri, {headers = headers}) |
| assert(res.status == 200) |
| if not res then |
| ngx.log(ngx.ERR, err) |
| return |
| end |
| ngx.say(res.body) |
| } |
| } |
| --- response_body |
| do body filter |
| --- error_log |
| run before_proxy phase balancer_ip : 127.0.0.1 |
| --- no_error_log |
| enable sample upstream |
| |
| |
| |
| === TEST 4: one of route has plugins, disable skip body filter |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "serverless-pre-function": { |
| "phase": "before_proxy", |
| "functions" : ["return function(conf, ctx) ngx.log(ngx.WARN, \"run before_proxy phase balancer_ip : \", ctx.balancer_ip) end"] |
| } |
| }, |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| |
| local code, body = t('/apisix/admin/routes/2', |
| ngx.HTTP_PUT, |
| [[{ |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello1" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| |
| local http = require "resty.http" |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello1" |
| local httpc = http.new() |
| local headers = { |
| ["apikey"] = "auth-jack" |
| } |
| local res, err = httpc:request_uri(uri, {headers = headers}) |
| assert(res.status == 200) |
| if not res then |
| ngx.log(ngx.ERR, err) |
| return |
| end |
| ngx.say(res.body) |
| } |
| } |
| --- response_body |
| do body filter |
| --- no_error_log |
| enable sample upstream |
| |
| |
| |
| === TEST 5: exist global_rules, disable skip body filter |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| local code, body = t('/apisix/admin/global_rules/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "plugins": { |
| "serverless-pre-function": { |
| "phase": "before_proxy", |
| "functions" : ["return function(conf, ctx) ngx.log(ngx.WARN, \"run before_proxy phase balancer_ip : \", ctx.balancer_ip) end"] |
| } |
| } |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "methods": ["GET"], |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| local http = require "resty.http" |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local httpc = http.new() |
| local res, err = httpc:request_uri(uri) |
| assert(res.status == 200) |
| if not res then |
| ngx.log(ngx.ERR, err) |
| return |
| end |
| ngx.say(res.body) |
| } |
| } |
| --- response_body |
| do body filter |
| --- error_log |
| run before_proxy phase balancer_ip : 127.0.0.1 |
| --- no_error_log |
| enable sample upstream |
| |
| |
| |
| === TEST 6: upstream with keepalive_pool, disable sample upstream |
| --- config |
| location /t { |
| content_by_lua_block { |
| local t = require("lib.test_admin").test |
| |
| local code, body = t('/apisix/admin/routes/1', |
| ngx.HTTP_PUT, |
| [[{ |
| "upstream": { |
| "nodes": { |
| "127.0.0.1:1980": 1 |
| }, |
| "keepalive_pool": { |
| "size": 1, |
| "idle_timeout": 8, |
| "requests": 2 |
| }, |
| "type": "roundrobin" |
| }, |
| "uri": "/hello" |
| }]] |
| ) |
| if code >= 300 then |
| ngx.status = code |
| ngx.say(body) |
| return |
| end |
| ngx.sleep(0.5) |
| |
| local http = require "resty.http" |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port .. "/hello" |
| local httpc = http.new() |
| local res, err = httpc:request_uri(uri) |
| assert(res.status == 200) |
| if not res then |
| ngx.log(ngx.ERR, err) |
| return |
| end |
| ngx.say(res.body) |
| } |
| } |
| --- response_body |
| do body filter |
| --- error_log |
| proxy request to 127.0.0.1:1980 |
| --- no_error_log |
| enable sample upstream |