| # |
| # Licensed to the Apache Software Foundation (ASF) under one or more |
| # contributor license agreements. See the NOTICE file distributed with |
| # this work for additional information regarding copyright ownership. |
| # The ASF licenses this file to You under the Apache License, Version 2.0 |
| # (the "License"); you may not use this file except in compliance with |
| # the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| use t::APISIX 'no_plan'; |
| |
| repeat_each(1); |
| log_level('info'); |
| no_root_location(); |
| no_shuffle(); |
| worker_connections(256); |
| |
| add_block_preprocessor(sub { |
| my ($block) = @_; |
| |
| if (!$block->yaml_config) { |
| my $yaml_config = <<_EOC_; |
| apisix: |
| node_listen: 1984 |
| config_center: yaml |
| enable_admin: false |
| _EOC_ |
| |
| $block->set_value("yaml_config", $yaml_config); |
| } |
| |
| if (!$block->request) { |
| $block->set_value("request", "GET /t"); |
| } |
| }); |
| |
| run_tests(); |
| |
| __DATA__ |
| |
| === TEST 1: can't use service_name with nodes |
| --- apisix_yaml |
| routes: |
| - |
| uris: |
| - /hello |
| upstream_id: 1 |
| upstreams: |
| - service_name: abaaba |
| discovery_type: eureka |
| nodes: |
| "127.0.0.1:80": 1 |
| type: roundrobin |
| id: 1 |
| #END |
| --- error_log |
| value should match only one schema, but matches both schemas 1 and 2 |
| --- request |
| GET /hello |
| --- error_code: 502 |
| |
| |
| |
| === TEST 2: route + service |
| --- apisix_yaml |
| services: |
| - id: 1 |
| upstream: |
| type: roundrobin |
| nodes: |
| "127.0.0.1:1980": 1 |
| "127.0.0.1:1970": 1 |
| checks: |
| active: |
| http_path: /status |
| host: foo.com |
| healthy: |
| interval: 1 |
| successes: 1 |
| unhealthy: |
| interval: 1 |
| http_failures: 2 |
| routes: |
| - |
| service_id: 1 |
| uri: /server_port |
| #END |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port |
| .. "/server_port" |
| |
| do |
| local httpc = http.new() |
| local res, err = httpc:request_uri(uri, {method = "GET", keepalive = false}) |
| end |
| |
| ngx.sleep(2.5) |
| |
| local ports_count = {} |
| for i = 1, 12 do |
| local httpc = http.new() |
| local res, err = httpc:request_uri(uri, {method = "GET", keepalive = false}) |
| if not res then |
| ngx.say(err) |
| return |
| end |
| |
| ports_count[res.body] = (ports_count[res.body] or 0) + 1 |
| end |
| |
| local ports_arr = {} |
| for port, count in pairs(ports_count) do |
| table.insert(ports_arr, {port = port, count = count}) |
| end |
| |
| local function cmd(a, b) |
| return a.port > b.port |
| end |
| table.sort(ports_arr, cmd) |
| |
| ngx.say(require("toolkit.json").encode(ports_arr)) |
| ngx.exit(200) |
| } |
| } |
| --- response_body |
| [{"count":12,"port":"1980"}] |
| --- grep_error_log eval |
| qr/\([^)]+\) unhealthy .* for '.*'/ |
| --- grep_error_log_out |
| (upstream#/services/1) unhealthy TCP increment (1/2) for 'foo.com(127.0.0.1:1970)' |
| (upstream#/services/1) unhealthy TCP increment (2/2) for 'foo.com(127.0.0.1:1970)' |
| --- timeout: 10 |
| |
| |
| |
| === TEST 3: route override service |
| --- apisix_yaml |
| services: |
| - id: 1 |
| upstream: |
| type: roundrobin |
| nodes: |
| "127.0.0.2:1980": 1 |
| "127.0.0.2:1970": 1 |
| checks: |
| active: |
| http_path: /status |
| host: foo.com |
| healthy: |
| interval: 1 |
| successes: 1 |
| unhealthy: |
| interval: 1 |
| http_failures: 2 |
| routes: |
| - |
| service_id: 1 |
| uri: /server_port |
| upstream: |
| type: roundrobin |
| nodes: |
| "127.0.0.1:1980": 1 |
| "127.0.0.1:1970": 1 |
| checks: |
| active: |
| http_path: /status |
| host: foo.com |
| healthy: |
| interval: 1 |
| successes: 1 |
| unhealthy: |
| interval: 1 |
| http_failures: 2 |
| #END |
| --- config |
| location /t { |
| content_by_lua_block { |
| local http = require "resty.http" |
| local uri = "http://127.0.0.1:" .. ngx.var.server_port |
| .. "/server_port" |
| |
| do |
| local httpc = http.new() |
| local res, err = httpc:request_uri(uri, {method = "GET", keepalive = false}) |
| end |
| |
| ngx.sleep(2.5) |
| |
| local ports_count = {} |
| for i = 1, 12 do |
| local httpc = http.new() |
| local res, err = httpc:request_uri(uri, {method = "GET", keepalive = false}) |
| if not res then |
| ngx.say(err) |
| return |
| end |
| |
| ports_count[res.body] = (ports_count[res.body] or 0) + 1 |
| end |
| |
| local ports_arr = {} |
| for port, count in pairs(ports_count) do |
| table.insert(ports_arr, {port = port, count = count}) |
| end |
| |
| local function cmd(a, b) |
| return a.port > b.port |
| end |
| table.sort(ports_arr, cmd) |
| |
| ngx.say(require("toolkit.json").encode(ports_arr)) |
| ngx.exit(200) |
| } |
| } |
| --- response_body |
| [{"count":12,"port":"1980"}] |
| --- grep_error_log eval |
| qr/\([^)]+\) unhealthy .* for '.*'/ |
| --- grep_error_log_out |
| (upstream#/routes/arr_1) unhealthy TCP increment (1/2) for 'foo.com(127.0.0.1:1970)' |
| (upstream#/routes/arr_1) unhealthy TCP increment (2/2) for 'foo.com(127.0.0.1:1970)' |
| --- timeout: 10 |