builder/component/build.properties - ant-ivyde - Git at Google

 #	 ***************************************************************
 #	 * Licensed to the Apache Software Foundation (ASF) under one
 #	 * or more contributor license agreements.  See the NOTICE file
 #	 * distributed with this work for additional information
 #	 * regarding copyright ownership.  The ASF licenses this file
 #	 * to you under the Apache License, Version 2.0 (the
 #	 * "License"); you may not use this file except in compliance
 #	 * with the License.  You may obtain a copy of the License at
 #	 *
 #	 *   http://www.apache.org/licenses/LICENSE-2.0
 #	 *
 #	 * Unless required by applicable law or agreed to in writing,
 #	 * software distributed under the License is distributed on an
 #	 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 #	 * KIND, either express or implied.  See the License for the
 #	 * specific language governing permissions and limitations
 #	 * under the License.
 #	 ***************************************************************

 ## P2 specifiv build properties

 #for a P2 only build
 #p2.gathering = true
 #skipMirroring=true
 #skipDirector=true

 generate.p2.metadata=true
 p2.metadata.repo=file:${buildDirectory}/p2repo
 p2.artifact.repo=file:${buildDirectory}/p2repo
 p2.metadata.repo.name=Apache IvyDE P2 Eclipse repository
 p2.artifact.repo.name=Apache IvyDE P2 Eclipse repository
 p2.publish.artifacts=false
 p2.root.name=Apache IvyDE

 runPackager=false

 # The prefix that will be used in the generated archive.
 archivePrefix=

 # The location underwhich all of the build output will be collected.
 collectingFolder=${archivePrefix}

 # The list of {os, ws, arch} configurations to build.  This
 # value is a '&' separated list of ',' separate triples.  For example,
 #     configs=win32,win32,x86 & linux,motif,x86
 # By default the value is *,*,*
 configs = *, *, *
 #configs=win32, win32, x86 & \
 #	linux, gtk, ppc &\
 # linux, gtk, x86 & \
 #	linux, gtk, x86_64 & \
 #	linux, motif, x86 & \
 #	solaris, motif, sparc & \
 #	solaris, gtk, sparc & \
 #	aix, motif, ppc & \
 #	hpux, motif, PA_RISC & \
 #	macosx, carbon, ppc

 # By default PDE creates one archive (result) per entry listed in the configs property.
 # Setting this value to try will cause PDE to only create one output containing all
 # artifacts for all the platforms listed in the configs property.
 #groupConfigurations=true

 #The format of the archive. By default a zip is created using antZip.
 #The list can only contain the configuration for which the desired format is different than zip.
 #archivesFormat=win32, win32, x86 - antZip& \
 #	linux, gtk, ppc - antZip &\
 #    linux, gtk, x86 - antZip& \
 #	linux, gtk, x86_64 - antZip& \
 # linux, motif, x86 - antZip& \
 #	solaris, motif, sparc - antZip& \
 #	solaris, gtk, sparc - antZip& \
 #	aix, motif, ppc - antZip& \
 #	hpux, motif, PA_RISC - antZip& \
 #	macosx, carbon, ppc - antZip

 #Set to true if you want the output to be ready for an update jar (no site.xml generated)
 # outputUpdateJars = false

 #Set to true for Jnlp generation
 #codebase should be a URL that will be used as the root of all relative URLs in the output.
 #generateJnlp=false
 #jnlp.codebase=<codebase url>
 #jnlp.j2se=<j2se version>
 #jnlp.locale=<a locale>
 #jnlp.generateOfflineAllowed=true or false generate <offlineAllowed/> attribute in the generated features
 #jnlp.configs=${configs}			#uncomment to filter the content of the generated jnlp files based on the configuration being built

 #Set to true if you want to sign jars
 #signJars=false
 #sign.alias=<alias>
 #sign.keystore=<keystore location>
 #sign.storepass=<keystore password>

 #Arguments to send to the zip executable
 zipargs=

 #Arguments to send to the tar executable
 tarargs=

 #Control the creation of a file containing the version included in each configuration - on by default
 #generateVersionsLists=false

 ############## BUILD NAMING CONTROL ################

 # Type of build.  Used in naming the build output.  Typically this value is
 # one of I, N, M, S, ...
 buildType=I

 # ID of the build.  Used in naming the build output.
 buildId=${build.version}

 # Label for the build.  Used in naming the build output
 buildLabel=${build.version}

 #The value to be used for the qualifier of a plugin or feature when you want to override the value computed by pde.
 #The value will only be applied to plugin or features indicating build.properties, qualifier = context
 forceContextQualifier=${DSTAMP}${TSTAMP}

 #Enable / disable the generation of a suffix for the features that use .qualifier.
 #The generated suffix is computed according to the content of the feature
 generateFeatureVersionSuffix=false

 ############# BASE CONTROL #############
 # Settings for the base Eclipse components and Java class libraries
 # against which you are building.
 # Base location for anything the build needs to compile against.  For example,
 # in most RCP app or a plug-in,  the baseLocation should be the location of a previously
 # installed Eclipse against which the application or plug-in code will be compiled and the RCP delta pack.

 #Os/Ws/Arch/nl of the eclipse specified by baseLocation
 baseos=win32
 basews=win32
 basearch=x86

 #this property indicates whether you want the set of plug-ins and features to be considered during the build to be limited to the ones reachable from the features / plugins being built
 filteredDependencyCheck=false

 #this property indicates whether the resolution should be done in development mode (i.e. ignore multiple bundles with singletons)
 resolution.devMode=false

 #pluginPath is a list of locations in which to find plugins and features.  This list is separated by the platform file separator (; or :)
 #a location is one of:
 #- the location of the jar or folder that is the plugin or feature : /path/to/foo.jar or /path/to/foo
 #- a directory that contains a /plugins or /features subdirectory
 #- the location of a feature.xml, or for 2.1 style plugins, the plugin.xml or fragment.xml
 #pluginPath=

 skipBase=true
 eclipseURL=<url for eclipse download site>
 eclipseBuildId=<Id of Eclipse build to get>
 eclipseBaseURL=${eclipseURL}/eclipse-platform-${eclipseBuildId}-win32.zip


 ############# MAP FILE CONTROL ################
 # This section defines CVS tags to use when fetching the map files from the repository.
 # If you want to fetch the map file from repository / location, change the getMapFiles target in the customTargets.xml

 #skipMaps=true
 mapsRepo=:pserver:anonymous@example.com/path/to/repo
 mapsRoot=path/to/maps
 mapsCheckoutTag=HEAD

 #tagMaps=true
 mapsTagTag=v${buildId}


 ############ REPOSITORY CONTROL ###############
 # This section defines properties parameterizing the repositories where plugins, fragments
 # bundles and features are being obtained from.

 # The tags to use when fetching elements to build.
 # By default thebuilder will use whatever is in the maps.
 # This value takes the form of a comma separated list of repository identifier (like used in the map files) and the
 # overriding value
 # For example fetchTag=CVS=HEAD, SVN=v20050101
 fetchTag=COPY=${buildDirectory}/../
 #skipFetch=true


 ############# JAVA COMPILER OPTIONS ##############
 # The location of the Java jars to compile against.  Typically the rt.jar for your JDK/JRE
 #bootclasspath=${java.home}/lib/rt.jar

 # specific JRE locations to compile against. These values are used to compile bundles specifying a
 # Bundle-RequiredExecutionEnvironment. Uncomment and set values for environments that you support
 #CDC-1.0/Foundation-1.0= /path/to/rt.jar
 #CDC-1.1/Foundation-1.1=
 #OSGi/Minimum-1.0=
 #OSGi/Minimum-1.1=
 #JRE-1.1=
 #J2SE-1.2=
 #J2SE-1.3=
 #J2SE-1.4=
 #J2SE-1.5=
 #JavaSE-1.6=
 #PersonalJava-1.1=
 #PersonalJava-1.2=
 #CDC-1.0/PersonalBasis-1.0=
 #CDC-1.0/PersonalJava-1.0=
 #CDC-1.1/PersonalBasis-1.1=
 #CDC-1.1/PersonalJava-1.1=

 # Specify the output format of the compiler log when eclipse jdt is used
 logExtension=.log

 # Whether or not to include debug info in the output jars
 javacDebugInfo=false

 # Whether or not to fail the build if there are compiler errors
 javacFailOnError=true

 # Enable or disable verbose mode of the compiler
 javacVerbose=false

 # Extra arguments for the compiler. These are specific to the java compiler being used.
 #compilerArg=

 # Default value for the version of the source code. This value is used when compiling plug-ins that do not set the Bundle-RequiredExecutionEnvironment or set javacSource in build.properties
 javacSource=1.6
 bundleJavacSource=1.6

 # Default value for the version of the byte code targeted. This value is used when compiling plug-ins that do not set the Bundle-RequiredExecutionEnvironment or set javacTarget in build.properties.
 javacTarget=1.6
 bundleJavacTarget=1.6
	# ***************************************************************
	# * Licensed to the Apache Software Foundation (ASF) under one
	# * or more contributor license agreements. See the NOTICE file
	# * distributed with this work for additional information
	# * regarding copyright ownership. The ASF licenses this file
	# * to you under the Apache License, Version 2.0 (the
	# * "License"); you may not use this file except in compliance
	# * with the License. You may obtain a copy of the License at
	# *
	# * http://www.apache.org/licenses/LICENSE-2.0
	# *
	# * Unless required by applicable law or agreed to in writing,
	# * software distributed under the License is distributed on an
	# * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	# * KIND, either express or implied. See the License for the
	# * specific language governing permissions and limitations
	# * under the License.
	# ***************************************************************

	## P2 specifiv build properties

	#for a P2 only build
	#p2.gathering = true
	#skipMirroring=true
	#skipDirector=true

	generate.p2.metadata=true
	p2.metadata.repo=file:${buildDirectory}/p2repo
	p2.artifact.repo=file:${buildDirectory}/p2repo
	p2.metadata.repo.name=Apache IvyDE P2 Eclipse repository
	p2.artifact.repo.name=Apache IvyDE P2 Eclipse repository
	p2.publish.artifacts=false
	p2.root.name=Apache IvyDE

	runPackager=false

	# The prefix that will be used in the generated archive.
	archivePrefix=

	# The location underwhich all of the build output will be collected.
	collectingFolder=${archivePrefix}

	# The list of {os, ws, arch} configurations to build. This
	# value is a '&' separated list of ',' separate triples. For example,
	# configs=win32,win32,x86 & linux,motif,x86
	# By default the value is ,,*
	configs = , , *
	#configs=win32, win32, x86 & \
	# linux, gtk, ppc &\
	# linux, gtk, x86 & \
	# linux, gtk, x86_64 & \
	# linux, motif, x86 & \
	# solaris, motif, sparc & \
	# solaris, gtk, sparc & \
	# aix, motif, ppc & \
	# hpux, motif, PA_RISC & \
	# macosx, carbon, ppc

	# By default PDE creates one archive (result) per entry listed in the configs property.
	# Setting this value to try will cause PDE to only create one output containing all
	# artifacts for all the platforms listed in the configs property.
	#groupConfigurations=true

	#The format of the archive. By default a zip is created using antZip.
	#The list can only contain the configuration for which the desired format is different than zip.
	#archivesFormat=win32, win32, x86 - antZip& \
	# linux, gtk, ppc - antZip &\
	# linux, gtk, x86 - antZip& \
	# linux, gtk, x86_64 - antZip& \
	# linux, motif, x86 - antZip& \
	# solaris, motif, sparc - antZip& \
	# solaris, gtk, sparc - antZip& \
	# aix, motif, ppc - antZip& \
	# hpux, motif, PA_RISC - antZip& \
	# macosx, carbon, ppc - antZip

	#Set to true if you want the output to be ready for an update jar (no site.xml generated)
	# outputUpdateJars = false

	#Set to true for Jnlp generation
	#codebase should be a URL that will be used as the root of all relative URLs in the output.
	#generateJnlp=false
	#jnlp.codebase=<codebase url>
	#jnlp.j2se=<j2se version>
	#jnlp.locale=<a locale>
	#jnlp.generateOfflineAllowed=true or false generate <offlineAllowed/> attribute in the generated features
	#jnlp.configs=${configs} #uncomment to filter the content of the generated jnlp files based on the configuration being built

	#Set to true if you want to sign jars
	#signJars=false
	#sign.alias=<alias>
	#sign.keystore=<keystore location>
	#sign.storepass=<keystore password>

	#Arguments to send to the zip executable
	zipargs=

	#Arguments to send to the tar executable
	tarargs=

	#Control the creation of a file containing the version included in each configuration - on by default
	#generateVersionsLists=false

	############## BUILD NAMING CONTROL ################

	# Type of build. Used in naming the build output. Typically this value is
	# one of I, N, M, S, ...
	buildType=I

	# ID of the build. Used in naming the build output.
	buildId=${build.version}

	# Label for the build. Used in naming the build output
	buildLabel=${build.version}

	#The value to be used for the qualifier of a plugin or feature when you want to override the value computed by pde.
	#The value will only be applied to plugin or features indicating build.properties, qualifier = context
	forceContextQualifier=${DSTAMP}${TSTAMP}

	#Enable / disable the generation of a suffix for the features that use .qualifier.
	#The generated suffix is computed according to the content of the feature
	generateFeatureVersionSuffix=false

	############# BASE CONTROL #############
	# Settings for the base Eclipse components and Java class libraries
	# against which you are building.
	# Base location for anything the build needs to compile against. For example,
	# in most RCP app or a plug-in, the baseLocation should be the location of a previously
	# installed Eclipse against which the application or plug-in code will be compiled and the RCP delta pack.

	#Os/Ws/Arch/nl of the eclipse specified by baseLocation
	baseos=win32
	basews=win32
	basearch=x86

	#this property indicates whether you want the set of plug-ins and features to be considered during the build to be limited to the ones reachable from the features / plugins being built
	filteredDependencyCheck=false

	#this property indicates whether the resolution should be done in development mode (i.e. ignore multiple bundles with singletons)
	resolution.devMode=false

	#pluginPath is a list of locations in which to find plugins and features. This list is separated by the platform file separator (; or :)
	#a location is one of:
	#- the location of the jar or folder that is the plugin or feature : /path/to/foo.jar or /path/to/foo
	#- a directory that contains a /plugins or /features subdirectory
	#- the location of a feature.xml, or for 2.1 style plugins, the plugin.xml or fragment.xml
	#pluginPath=

	skipBase=true
	eclipseURL=<url for eclipse download site>
	eclipseBuildId=<Id of Eclipse build to get>
	eclipseBaseURL=${eclipseURL}/eclipse-platform-${eclipseBuildId}-win32.zip


	############# MAP FILE CONTROL ################
	# This section defines CVS tags to use when fetching the map files from the repository.
	# If you want to fetch the map file from repository / location, change the getMapFiles target in the customTargets.xml

	#skipMaps=true
	mapsRepo=:pserver:anonymous@example.com/path/to/repo
	mapsRoot=path/to/maps
	mapsCheckoutTag=HEAD

	#tagMaps=true
	mapsTagTag=v${buildId}


	############ REPOSITORY CONTROL ###############
	# This section defines properties parameterizing the repositories where plugins, fragments
	# bundles and features are being obtained from.

	# The tags to use when fetching elements to build.
	# By default thebuilder will use whatever is in the maps.
	# This value takes the form of a comma separated list of repository identifier (like used in the map files) and the
	# overriding value
	# For example fetchTag=CVS=HEAD, SVN=v20050101
	fetchTag=COPY=${buildDirectory}/../
	#skipFetch=true


	############# JAVA COMPILER OPTIONS ##############
	# The location of the Java jars to compile against. Typically the rt.jar for your JDK/JRE
	#bootclasspath=${java.home}/lib/rt.jar

	# specific JRE locations to compile against. These values are used to compile bundles specifying a
	# Bundle-RequiredExecutionEnvironment. Uncomment and set values for environments that you support
	#CDC-1.0/Foundation-1.0= /path/to/rt.jar
	#CDC-1.1/Foundation-1.1=
	#OSGi/Minimum-1.0=
	#OSGi/Minimum-1.1=
	#JRE-1.1=
	#J2SE-1.2=
	#J2SE-1.3=
	#J2SE-1.4=
	#J2SE-1.5=
	#JavaSE-1.6=
	#PersonalJava-1.1=
	#PersonalJava-1.2=
	#CDC-1.0/PersonalBasis-1.0=
	#CDC-1.0/PersonalJava-1.0=
	#CDC-1.1/PersonalBasis-1.1=
	#CDC-1.1/PersonalJava-1.1=

	# Specify the output format of the compiler log when eclipse jdt is used
	logExtension=.log

	# Whether or not to include debug info in the output jars
	javacDebugInfo=false

	# Whether or not to fail the build if there are compiler errors
	javacFailOnError=true

	# Enable or disable verbose mode of the compiler
	javacVerbose=false

	# Extra arguments for the compiler. These are specific to the java compiler being used.
	#compilerArg=

	# Default value for the version of the source code. This value is used when compiling plug-ins that do not set the Bundle-RequiredExecutionEnvironment or set javacSource in build.properties
	javacSource=1.6
	bundleJavacSource=1.6

	# Default value for the version of the byte code targeted. This value is used when compiling plug-ins that do not set the Bundle-RequiredExecutionEnvironment or set javacTarget in build.properties.
	javacTarget=1.6
	bundleJavacTarget=1.6