| # |
| # |
| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| # |
| |
| # Directly copied from jglobus. Not a good way to manager error properties. |
| 1 = Parameter not supported |
| 2 = The RSL length is greater than the maximum allowed |
| 3 = No resources available |
| 4 = Bad directory specified |
| 5 = The executable does not exist |
| 6 = Insufficient funds |
| 7 = Authentication with the remote server failed |
| 8 = Job cancelled by user |
| 9 = Job cancelled by system |
| |
| 10 = Data transfer to the server failed |
| 11 = The stdin file does not exist |
| 12 = The connection to the server failed (check host and port) |
| 13 = The provided RSL 'maxtime' value is invalid (not an integer or must be greater than 0) |
| 14 = The provided RSL 'count' value is invalid (not an integer or must be greater than 0) |
| 15 = The job manager received an invalid RSL |
| 16 = Could not connect to job manager |
| 17 = The job failed when the job manager attempted to run it |
| 18 = Paradyn error |
| 19 = The provided RSL 'jobtype' value is invalid |
| |
| 20 = The provided RSL 'myjob' value is invalid |
| 21 = The job manager failed to locate an internal script argument file |
| 22 = The job manager failed to create an internal script argument file |
| 23 = The job manager detected an invalid job state |
| 24 = The job manager detected an invalid script response |
| 25 = The job manager detected an invalid job state |
| 26 = The provided RSL 'jobtype' value is not supported by this job manager |
| 27 = Unimplemented |
| 28 = The job manager failed to create an internal script submission file |
| 29 = The job manager cannot find the user proxy |
| |
| 30 = The job manager failed to open the user proxy |
| 31 = The job manager failed to cancel the job as requested |
| 32 = System memory allocation failed |
| 33 = The interprocess job communication initialization failed |
| 34 = The interprocess job communication setup failed |
| 35 = The provided RSL 'host count' value is invalid |
| 36 = One of the provided RSL parameters is unsupported |
| 37 = The provided RSL 'queue' parameter is invalid |
| 38 = The provided RSL 'project' parameter is invalid |
| 39 = The provided RSL string includes variables that could not be identified |
| |
| 40 = The provided RSL 'environment' parameter is invalid |
| 41 = The provided RSL 'dryrun' parameter is invalid |
| 42 = The provided RSL is invalid (an empty string) |
| 43 = The job manager failed to stage the executable |
| 44 = The job manager failed to stage the stdin file |
| 45 = The requested job manager type is invalid |
| 46 = The provided RSL 'arguments' parameter is invalid |
| 47 = The gatekeeper failed to run the job manager |
| 48 = The provided RSL could not be properly parsed |
| 49 = There is a version mismatch between GRAM components |
| |
| 50 = The provided RSL 'arguments' parameter is invalid |
| 51 = The provided RSL 'count' parameter is invalid |
| 52 = The provided RSL 'directory' parameter is invalid |
| 53 = The provided RSL 'dryrun' parameter is invalid |
| 54 = The provided RSL 'environment' parameter is invalid |
| 55 = The provided RSL 'executable' parameter is invalid |
| 56 = The provided RSL 'host_count' parameter is invalid |
| 57 = The provided RSL 'jobtype' parameter is invalid |
| 58 = The provided RSL 'maxtime' parameter is invalid |
| 59 = The provided RSL 'myjob' parameter is invalid |
| |
| 60 = The provided RSL 'paradyn' parameter is invalid |
| 61 = The provided RSL 'project' parameter is invalid |
| 62 = The provided RSL 'queue' parameter is invalid |
| 63 = The provided RSL 'stderr' parameter is invalid |
| 64 = The provided RSL 'stdin' parameter is invalid |
| 65 = The provided RSL 'stdout' parameter is invalid |
| 66 = The job manager failed to locate an internal script |
| 67 = The job manager failed on the system call pipe() |
| 68 = The job manager failed on the system call fcntl() |
| 69 = The job manager failed to create the temporary stdout filename |
| |
| 70 = The job manager failed to create the temporary stderr filename |
| 71 = The job manager failed on the system call fork() |
| 72 = The executable file permissions do not allow execution |
| 73 = The job manager failed to open stdout |
| 74 = The job manager failed to open stderr |
| 75 = The cache file could not be opened in order to relocate the user proxy |
| 76 = Cannot access cache files in ~/.globus/.gass_cache, check permissions, quota, and disk space |
| 77 = The job manager failed to insert the contact in the client contact list |
| 78 = The contact was not found in the job manager's client contact list |
| 79 = Connecting to the job manager failed. Possible reasons: job terminated, invalid job contact, network problems, ... |
| |
| 80 = The syntax of the job contact is invalid |
| 81 = The executable parameter in the RSL is undefined |
| 82 = The job manager service is misconfigured. condor arch undefined |
| 83 = The job manager service is misconfigured. condor os undefined |
| 84 = The provided RSL 'min_memory' parameter is invalid |
| 85 = The provided RSL 'max_memory' parameter is invalid |
| 86 = The RSL 'min_memory' value is not zero or greater |
| 87 = The RSL 'max_memory' value is not zero or greater |
| 88 = The creation of a HTTP message failed |
| 89 = Parsing incoming HTTP message failed |
| |
| 90 = The packing of information into a HTTP message failed |
| 91 = An incoming HTTP message did not contain the expected information |
| 92 = The job manager does not support the service that the client requested |
| 93 = The gatekeeper failed to find the requested service |
| 94 = The jobmanager does not accept any new requests (shutting down) |
| 95 = The client failed to close the listener associated with the callback URL |
| 96 = The gatekeeper contact cannot be parsed |
| 97 = The job manager could not find the 'poe' command |
| 98 = The job manager could not find the 'mpirun' command |
| 99 = The provided RSL 'start_time' parameter is invalid" |
| 100 = The provided RSL 'reservation_handle' parameter is invalid |
| |
| 101 = The provided RSL 'max_wall_time' parameter is invalid |
| 102 = The RSL 'max_wall_time' value is not zero or greater |
| 103 = The provided RSL 'max_cpu_time' parameter is invalid |
| 104 = The RSL 'max_cpu_time' value is not zero or greater |
| 105 = The job manager is misconfigured, a scheduler script is missing |
| 106 = The job manager is misconfigured, a scheduler script has invalid permissions |
| 107 = The job manager failed to signal the job |
| 108 = The job manager did not recognize/support the signal type |
| 109 = The job manager failed to get the job id from the local scheduler |
| |
| 110 = The job manager is waiting for a commit signal |
| 111 = The job manager timed out while waiting for a commit signal |
| 112 = The provided RSL 'save_state' parameter is invalid |
| 113 = The provided RSL 'restart' parameter is invalid |
| 114 = The provided RSL 'two_phase' parameter is invalid |
| 115 = The RSL 'two_phase' value is not zero or greater |
| 116 = The provided RSL 'stdout_position' parameter is invalid |
| 117 = The RSL 'stdout_position' value is not zero or greater |
| 118 = The provided RSL 'stderr_position' parameter is invalid |
| 119 = The RSL 'stderr_position' value is not zero or greater |
| |
| 120 = The job manager restart attempt failed |
| 121 = The job state file doesn't exist |
| 122 = Could not read the job state file |
| 123 = Could not write the job state file |
| 124 = The old job manager is still alive |
| 125 = The job manager state file TTL expired |
| 126 = It is unknown if the job was submitted |
| 127 = The provided RSL 'remote_io_url' parameter is invalid |
| 128 = Could not write the remote io url file |
| 129 = The standard output/error size is different |
| |
| 130 = The job manager was sent a stop signal (job is still running) |
| 131 = The user proxy expired (job is still running) |
| 132 = The job was not submitted by original jobmanager |
| 133 = The job manager is not waiting for that commit signal |
| 134 = The provided RSL scheduler specific parameter is invalid |
| 135 = The job manager could not stage in a file |
| 136 = The scratch directory could not be created |
| 137 = The provided 'gass_cache' parameter is invalid |
| 138 = The RSL contains attributes which are not valid for job submission |
| 139 = The RSL contains attributes which are not valid for stdio update |
| |
| 140 = The RSL contains attributes which are not valid for job restart |
| 141 = The provided RSL 'file_stage_in' parameter is invalid |
| 142 = The provided RSL 'file_stage_in_shared' parameter is invalid |
| 143 = The provided RSL 'file_stage_out' parameter is invalid |
| 144 = The provided RSL 'gass_cache' parameter is invalid |
| 145 = The provided RSL 'file_cleanup' parameter is invalid |
| 146 = The provided RSL 'scratch_dir' parameter is invalid |
| 147 = The provided scheduler-specific RSL parameter is invalid |
| 148 = A required RSL attribute was not defined in the RSL spec |
| 149 = The gass_cache attribute points to an invalid cache directory |
| |
| 150 = The provided RSL 'save_state' parameter has an invalid value |
| 151 = The job manager could not open the RSL attribute validation file |
| 152 = The job manager could not read the RSL attribute validation file |
| 153 = The provided RSL 'proxy_timeout' is invalid |
| 154 = The RSL 'proxy_timeout' value is not greater than zero |
| 155 = The job manager could not stage out a file |
| 156 = The job contact string does not match any which the job manager is handling |
| 157 = Proxy delegation failed |
| 158 = The job manager could not lock the state lock file |
| |
| 1000 = Failed to start up callback handler |
| 1003 = Job contact not set |