activemq-c/m4/find_activemqcpp.m4 - activemq-cpp - Git at Google

 dnl -------------------------------------------------------- -*- autoconf -*-
 dnl Licensed to the Apache Software Foundation (ASF) under one or more
 dnl contributor license agreements.  See the NOTICE file distributed with
 dnl this work for additional information regarding copyright ownership.
 dnl The ASF licenses this file to You under the Apache License, Version 2.0
 dnl (the "License"); you may not use this file except in compliance with
 dnl the License.  You may obtain a copy of the License at
 dnl
 dnl     http://www.apache.org/licenses/LICENSE-2.0
 dnl
 dnl Unless required by applicable law or agreed to in writing, software
 dnl distributed under the License is distributed on an "AS IS" BASIS,
 dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 dnl See the License for the specific language governing permissions and
 dnl limitations under the License.
 dnl -------------------------------------------------------- -*- autoconf -*-
 dnl
 dnl find_decaf.m4 : locate the decaf include files and libraries
 dnl
 dnl This macro file can be used by applications to find and use the Decaf
 dnl library. It provides a standardized mechanism for using Decaf. It supports
 dnl embedding Decaf into the application source, or locating an installed
 dnl copy of Decaf.
 dnl
 dnl AC_FIND_ACTIVEMQCPP(srcdir, builddir, implicit-install-check, acceptable-majors)
 dnl
 dnl   where srcdir is the location of the bundled ActiveMQ-CPP source directory, or
 dnl   empty if source is not bundled.
 dnl
 dnl   where builddir is the location where the bundled ActiveMQ-CPP will will be built,
 dnl   or empty if the build will occur in the srcdir.
 dnl
 dnl   where implicit-install-check set to 1 indicates if there is no
 dnl   --with-decaf option specified, we will look for installed copies.
 dnl
 dnl   where acceptable-majors is a space separated list of acceptable major
 dnl   version numbers. Often only a single major version will be acceptable.
 dnl   If multiple versions are specified, and --with-decaf=PREFIX or the
 dnl   implicit installed search are used, then the first (leftmost) version
 dnl   in the list that is found will be used.  Currently defaults to [0 1].
 dnl
 dnl Sets the following variables on exit:
 dnl
 dnl   amqcpp_found : "yes", "no", "reconfig"
 dnl
 dnl   activemqcpp_config : If the activemqcpp-config tool exists, this refers to it. If
 dnl                        amqcpp_found is "reconfig", then the bundled directory
 dnl                        should be reconfigured *before* using activemqcpp_config.
 dnl
 dnl Note: this macro file assumes that activemqcpp_config has been installed; it
 dnl       is normally considered a required part of an ActiveMQ-CPP installation.
 dnl
 dnl If a bundled source directory is available and needs to be (re)configured,
 dnl then amqcpp_found is set to "reconfig". The caller should reconfigure the
 dnl (passed-in) source directory, placing the result in the build directory,
 dnl as appropriate.
 dnl
 dnl If amqcpp_found is "yes" or "reconfig", then the caller should use the
 dnl value of activemqcpp_config to fetch any necessary build/link information.
 dnl

 AC_DEFUN([AC_FIND_ACTIVEMQCPP], [
   amqcpp_found="no"

   if test "$target_os" = "os2-emx"; then
     # Scripts don't pass test -x on OS/2
     TEST_X="test -f"
   else
     TEST_X="test -x"
   fi

   ifelse([$4], [], [
          ifdef(AC_WARNING,AC_WARNING([$0: missing argument 4 (acceptable-majors): Defaulting to ActiveMQ-CPP 3.x then ActiveMQ-CPP 4.x]))
          acceptable_majors="3 4"],
          [acceptable_majors="$4"])

   ac_temp_acceptable_amqcpp_config="activemqcpp-config"

   AC_MSG_CHECKING(for ActiveMQ-CPP)
   AC_ARG_WITH(activemqcpp,
   [  --with-activemqcpp=PATH         prefix for installed ActiveMQ-CPP, path to ActiveMQ-CPP build tree,
                                      or the full path to activemqcpp-config],
   [
     if test "$withval" = "no" || test "$withval" = "yes"; then
       AC_MSG_ERROR([--with-activemqcpp requires a directory or file to be provided])
     fi

     for ac_temp_acceptable_amqcpp_config_file in $ac_temp_acceptable_amqcpp_config
     do
       for lookdir in "$withval/bin" "$withval"
       do
         if $TEST_X "$lookdir/$ac_temp_acceptable_amqcpp_config_file"; then
           amqcpp_found="yes"
           activemqcpp_config="$lookdir/$ac_temp_acceptable_amqcpp_config_file"
           break 2
         fi
       done
     done

     if test "$amqcpp_found" != "yes" && $TEST_X "$withval" && $withval --help > /dev/null 2>&1 ; then
       amqcpp_found="yes"
       activemqcpp_config="$withval"
     fi

     dnl if --with-activemqcpp is used, it is a fatal error for its argument
     dnl to be invalid
     if test "$amqcpp_found" != "yes"; then
       AC_MSG_ERROR([the --with-activemqcpp parameter is incorrect. It must specify an install prefix, a build directory, or an activemqcpp-config file.])
     fi
   ],[
     dnl If we allow installed copies, check those before using bundled copy.
     if test -n "$3" && test "$3" = "1"; then
       for ac_temp_acceptable_amqcpp_config_file in $ac_temp_acceptable_amqcpp_config
       do
         if $ac_temp_acceptable_amqcpp_config_file --help > /dev/null 2>&1 ; then
           amqcpp_found="yes"
           activemqcpp_config="$ac_temp_acceptable_amqcpp_config_file"
           break
         else
           dnl look in some standard places
           for lookdir in /usr /usr/local /usr/local/activemq-cpp /opt/activemq-cpp; do
             if $TEST_X "$lookdir/bin/$ac_temp_acceptable_amqcpp_config_file"; then
               amqcpp_found="yes"
               activemqcpp_config="$lookdir/bin/$ac_temp_acceptable_amqcpp_config_file"
               break 2
             fi
           done
         fi
       done
     fi
     dnl if we have not found anything yet and have bundled source, use that
     if test "$amqcpp_found" = "no" && test -d "$1"; then
       amqcpp_temp_abs_srcdir="`cd $1 && pwd`"
       amqcpp_found="reconfig"
       ac_temp_acceptable_amqcpp_config_file="activemqcpp_config"

       if test -n "$2"; then
         activemqcpp_config="$2/$ac_temp_acceptable_amqcpp_config_file"
       else
         activemqcpp_config="$1/$ac_temp_acceptable_amqcpp_config_file"
       fi
     fi
   ])

   AC_MSG_RESULT($amqcpp_found)
 ])
	dnl -------------------------------------------------------- -- autoconf --
	dnl Licensed to the Apache Software Foundation (ASF) under one or more
	dnl contributor license agreements. See the NOTICE file distributed with
	dnl this work for additional information regarding copyright ownership.
	dnl The ASF licenses this file to You under the Apache License, Version 2.0
	dnl (the "License"); you may not use this file except in compliance with
	dnl the License. You may obtain a copy of the License at
	dnl
	dnl http://www.apache.org/licenses/LICENSE-2.0
	dnl
	dnl Unless required by applicable law or agreed to in writing, software
	dnl distributed under the License is distributed on an "AS IS" BASIS,
	dnl WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	dnl See the License for the specific language governing permissions and
	dnl limitations under the License.
	dnl -------------------------------------------------------- -- autoconf --
	dnl
	dnl find_decaf.m4 : locate the decaf include files and libraries
	dnl
	dnl This macro file can be used by applications to find and use the Decaf
	dnl library. It provides a standardized mechanism for using Decaf. It supports
	dnl embedding Decaf into the application source, or locating an installed
	dnl copy of Decaf.
	dnl
	dnl AC_FIND_ACTIVEMQCPP(srcdir, builddir, implicit-install-check, acceptable-majors)
	dnl
	dnl where srcdir is the location of the bundled ActiveMQ-CPP source directory, or
	dnl empty if source is not bundled.
	dnl
	dnl where builddir is the location where the bundled ActiveMQ-CPP will will be built,
	dnl or empty if the build will occur in the srcdir.
	dnl
	dnl where implicit-install-check set to 1 indicates if there is no
	dnl --with-decaf option specified, we will look for installed copies.
	dnl
	dnl where acceptable-majors is a space separated list of acceptable major
	dnl version numbers. Often only a single major version will be acceptable.
	dnl If multiple versions are specified, and --with-decaf=PREFIX or the
	dnl implicit installed search are used, then the first (leftmost) version
	dnl in the list that is found will be used. Currently defaults to [0 1].
	dnl
	dnl Sets the following variables on exit:
	dnl
	dnl amqcpp_found : "yes", "no", "reconfig"
	dnl
	dnl activemqcpp_config : If the activemqcpp-config tool exists, this refers to it. If
	dnl amqcpp_found is "reconfig", then the bundled directory
	dnl should be reconfigured before using activemqcpp_config.
	dnl
	dnl Note: this macro file assumes that activemqcpp_config has been installed; it
	dnl is normally considered a required part of an ActiveMQ-CPP installation.
	dnl
	dnl If a bundled source directory is available and needs to be (re)configured,
	dnl then amqcpp_found is set to "reconfig". The caller should reconfigure the
	dnl (passed-in) source directory, placing the result in the build directory,
	dnl as appropriate.
	dnl
	dnl If amqcpp_found is "yes" or "reconfig", then the caller should use the
	dnl value of activemqcpp_config to fetch any necessary build/link information.
	dnl

	AC_DEFUN([AC_FIND_ACTIVEMQCPP], [
	amqcpp_found="no"

	if test "$target_os" = "os2-emx"; then
	# Scripts don't pass test -x on OS/2
	TEST_X="test -f"
	else
	TEST_X="test -x"
	fi

	ifelse([$4], [], [
	ifdef(AC_WARNING,AC_WARNING([$0: missing argument 4 (acceptable-majors): Defaulting to ActiveMQ-CPP 3.x then ActiveMQ-CPP 4.x]))
	acceptable_majors="3 4"],
	[acceptable_majors="$4"])

	ac_temp_acceptable_amqcpp_config="activemqcpp-config"

	AC_MSG_CHECKING(for ActiveMQ-CPP)
	AC_ARG_WITH(activemqcpp,
	[ --with-activemqcpp=PATH prefix for installed ActiveMQ-CPP, path to ActiveMQ-CPP build tree,
	or the full path to activemqcpp-config],
	[
	if test "$withval" = "no" \|\| test "$withval" = "yes"; then
	AC_MSG_ERROR([--with-activemqcpp requires a directory or file to be provided])
	fi

	for ac_temp_acceptable_amqcpp_config_file in $ac_temp_acceptable_amqcpp_config
	do
	for lookdir in "$withval/bin" "$withval"
	do
	if $TEST_X "$lookdir/$ac_temp_acceptable_amqcpp_config_file"; then
	amqcpp_found="yes"
	activemqcpp_config="$lookdir/$ac_temp_acceptable_amqcpp_config_file"
	break 2
	fi
	done
	done

	if test "$amqcpp_found" != "yes" && $TEST_X "$withval" && $withval --help > /dev/null 2>&1 ; then
	amqcpp_found="yes"
	activemqcpp_config="$withval"
	fi

	dnl if --with-activemqcpp is used, it is a fatal error for its argument
	dnl to be invalid
	if test "$amqcpp_found" != "yes"; then
	AC_MSG_ERROR([the --with-activemqcpp parameter is incorrect. It must specify an install prefix, a build directory, or an activemqcpp-config file.])
	fi
	],[
	dnl If we allow installed copies, check those before using bundled copy.
	if test -n "$3" && test "$3" = "1"; then
	for ac_temp_acceptable_amqcpp_config_file in $ac_temp_acceptable_amqcpp_config
	do
	if $ac_temp_acceptable_amqcpp_config_file --help > /dev/null 2>&1 ; then
	amqcpp_found="yes"
	activemqcpp_config="$ac_temp_acceptable_amqcpp_config_file"
	break
	else
	dnl look in some standard places
	for lookdir in /usr /usr/local /usr/local/activemq-cpp /opt/activemq-cpp; do
	if $TEST_X "$lookdir/bin/$ac_temp_acceptable_amqcpp_config_file"; then
	amqcpp_found="yes"
	activemqcpp_config="$lookdir/bin/$ac_temp_acceptable_amqcpp_config_file"
	break 2
	fi
	done
	fi
	done
	fi
	dnl if we have not found anything yet and have bundled source, use that
	if test "$amqcpp_found" = "no" && test -d "$1"; then
	amqcpp_temp_abs_srcdir="`cd $1 && pwd`"
	amqcpp_found="reconfig"
	ac_temp_acceptable_amqcpp_config_file="activemqcpp_config"

	if test -n "$2"; then
	activemqcpp_config="$2/$ac_temp_acceptable_amqcpp_config_file"
	else
	activemqcpp_config="$1/$ac_temp_acceptable_amqcpp_config_file"
	fi
	fi
	])

	AC_MSG_RESULT($amqcpp_found)
	])