activemq-cpp/src/main/decaf/nio/ByteBuffer.h

/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef _DECAF_NIO_BYTEBUFFER_H_
#define _DECAF_NIO_BYTEBUFFER_H_

#include <decaf/nio/Buffer.h>
#include <decaf/lang/Comparable.h>
#include <decaf/lang/exceptions/NullPointerException.h>
#include <decaf/lang/exceptions/IndexOutOfBoundsException.h>
#include <decaf/nio/BufferUnderflowException.h>
#include <decaf/nio/BufferOverflowException.h>
#include <decaf/nio/ReadOnlyBufferException.h>

namespace decaf{
namespace nio{

    class CharBuffer;
    class DoubleBuffer;
    class FloatBuffer;
    class ShortBuffer;
    class IntBuffer;
    class LongBuffer;

    /**
     * This class defines six categories of operations upon byte buffers:
     *
     *  1. Absolute and relative get and put methods that read and write single bytes;
     *  2. Relative bulk get methods that transfer contiguous sequences of bytes from
     *     this buffer into an array;
     *  3. Relative bulk put methods that transfer contiguous sequences of bytes from
     *     a byte array or some other byte buffer into this buffer;
     *  4. Absolute and relative get and put methods that read and write values of other
     *     primitive types, translating them to and from sequences of bytes in a
     *     particular byte order;
     *  5. Methods for creating view buffers, which allow a byte buffer to be viewed as
     *     a buffer containing values of some other primitive type; and
     *  6. Methods for compacting, duplicating, and slicing a byte buffer.
     *
     * Byte buffers can be created either by allocation, which allocates space for the
     * buffer's content, or by wrapping an existing byte array into a buffer.
     *
     * Access to binary data:
     *
     * This class defines methods for reading and writing values of all other primitive
     * types, except boolean. Primitive values are translated to (or from) sequences of
     * bytes according to the buffer's current byte order.
     *
     * For access to heterogeneous binary data, that is, sequences of values of
     * different types, this class defines a family of absolute and relative get and
     * put methods for each type. For 32-bit floating-point values, for example, this
     * class defines:
     *
     *   float getFloat()
     *   float getFloat(int index)
     *   void  putFloat(float f)
     *   void  putFloat(int index, float f)
     *
     * Corresponding methods are defined for the types char, short, int, long, and
     * double. The index parameters of the absolute get and put methods are in terms
     * of bytes rather than of the type being read or written.
     *
     * For access to homogeneous binary data, that is, sequences of values of the same
     * type, this class defines methods that can create views of a given byte buffer.
     * A view buffer is simply another buffer whose content is backed by the byte buffer.
     * Changes to the byte buffer's content will be visible in the view buffer, and vice
     * versa; the two buffers' position, limit, and mark values are independent. The
     * asFloatBuffer method, for example, creates an instance of the FloatBuffer class
     * that is backed by the byte buffer upon which the method is invoked. Corresponding
     * view-creation methods are defined for the types char, short, int, long, and double.
     *
     * View buffers have two important advantages over the families of type-specific
     * get and put methods described above:
     *
     *   A view buffer is indexed not in terms of bytes but rather in terms of the
     *   type-specific size of its values;
     *
     *   A view buffer provides relative bulk get and put methods that can transfer
     *   contiguous sequences of values between a buffer and an array or some other
     *   buffer of the same type; and
     *
     */
    class DECAF_API ByteBuffer : public Buffer,
                                 public lang::Comparable<ByteBuffer> {
    protected:

        /**
         * Creates a ByteBuffer object that has its backing array allocated internally
         * and is then owned and deleted when this object is deleted.  The array is
         * initially created with all elements initialized to zero.
         *
         * @param capacity
         *      The size of the array, this is the limit we read and write to.
         *
         * @throws IllegalArgumentException if capacity is negative.
         */
        ByteBuffer(int capacity);

    public:

        virtual ~ByteBuffer() {}

        /**
         * @return a std::string describing this object
         */
        virtual std::string toString() const;

        /**
         * Relative bulk get method.
         *
         * This method transfers bytes from this buffer into the given destination
         * vector. An invocation of this method of the form src.get(a) behaves in
         * exactly the same way as the invocation.  The vector must be sized to the
         * amount of data that is to be read, that is to say, the caller should call
         * buffer.resize( N ) before calling this get method.
         *
         * @return a reference to this Byte Buffer.
         *
         * @throws BufferUnderflowException if there are fewer than length bytes remaining
         *         in this buffer
         */
        ByteBuffer& get(std::vector<unsigned char> buffer);

        /**
         * Relative bulk get method.
         *
         * This method transfers bytes from this buffer into the given destination array.
         * If there are fewer bytes remaining in the buffer than are required to satisfy
         * the request, that is, if length > remaining(), then no bytes are transferred
         * and a BufferUnderflowException is thrown.
         *
         * Otherwise, this method copies length bytes from this buffer into the given
         * array, starting at the current position of this buffer and at the given offset
         * in the array. The position of this buffer is then incremented by length.
         *
         * @param buffer
         *      The pointer to an allocated buffer to fill.
         * @param size
         *      The size of the passed in Buffer.
         * @param offset
         *      The position in the buffer to start filling.
         * @param length
         *      The amount of data to put in the passed buffer.
         *
         * @return a reference to this Buffer.
         *
         * @throws IndexOutOfBoundsException if the preconditions of size, offset, or length
         *         are not met.
         * @throws BufferUnderflowException if there are fewer than length bytes
         *         remaining in this buffer.
         * @throws NullPointerException if the passed buffer is null.
         */
        ByteBuffer& get(unsigned char* buffer, int size, int offset, int length);

        /**
         * This method transfers the bytes remaining in the given source buffer into
         * this buffer. If there are more bytes remaining in the source buffer than in
         * this buffer, that is, if src.remaining() > remaining(), then no bytes are
         * transferred and a BufferOverflowException is thrown.
         *
         * Otherwise, this method copies n = src.remaining() bytes from the given
         * buffer into this buffer, starting at each buffer's current position. The
         * positions of both buffers are then incremented by n.
         *
         * @param src
         *      The buffer to take bytes from an place in this one.
         *
         * @return a reference to this buffer
         *
         * @throws BufferOverflowException if there is insufficient space in this
         *         buffer for the remaining bytes in the source buffer
         * @throws IllegalArgumentException if the source buffer is this buffer
         * @throws ReadOnlyBufferException if this buffer is read-only
         */
        ByteBuffer& put(ByteBuffer& src);

        /**
         * This method transfers bytes into this buffer from the given source array.
         * If there are more bytes to be copied from the array than remain in this buffer,
         * that is, if length > remaining(), then no bytes are transferred and a
         * BufferOverflowException is thrown.
         *
         * Otherwise, this method copies length bytes from the given array into this
         * buffer, starting at the given offset in the array and at the current position
         * of this buffer. The position of this buffer is then incremented by length.
         *
         * @param buffer
         *      The array from which bytes are to be read.
         * @param size
         *      The size of the given array.
         * @param offset
         *      The offset within the array of the first byte to be read.
         * @param length
         *      The number of bytes to be read from the given array.
         *
         * @return a reference to this buffer.
         *
         * @throws BufferOverflowException if there is insufficient space in this buffer.
         * @throws ReadOnlyBufferException if this buffer is read-only.
         * @throws NullPointerException if the passed buffer is null.
         * @throws IndexOutOfBoundsException if the preconditions of size, offset, or length
         *         are not met.
         */
        ByteBuffer& put(const unsigned char* buffer, int size, int offset, int length);

        /**
         * This method transfers the entire content of the given source byte array into
         * this buffer.  This is the same as calling put( &buffer[0], buffer.size(), 0, buffer.size() )
         *
         * @param buffer
         *      The buffer whose contents are copied to this ByteBuffer.
         *
         * @return a reference to this buffer.
         *
         * @throws BufferOverflowException if there is insufficient space in this buffer.
         * @throws ReadOnlyBufferException if this buffer is read-only.
         */
        ByteBuffer& put(std::vector<unsigned char>& buffer);

    public:   // Abstract Methods

        /**
         * Tells whether or not this buffer is read-only.
         *
         * @return true if, and only if, this buffer is read-only
         */
        virtual bool isReadOnly() const = 0;

        /**
         * Returns the byte array that backs this buffer
         *
         * Modifications to this buffer's content will cause the returned array's
         * content to be modified, and vice versa.
         *
         * Invoke the hasArray method before invoking this method in order to ensure
         * that this buffer has an accessible backing array.
         *
         * @return The array that backs this buffer
         *
         * @throws ReadOnlyBufferException if this buffer is backed by an array but
         *         is read-only
         * @throws UnsupportedOperationException if this buffer is not backed by an
         *         accessible array
         */
        virtual unsigned char* array() = 0;

        /**
         * Returns the offset within this buffer's backing array of the first element
         * of the buffer.
         *
         * If this buffer is backed by an array then buffer position p corresponds to
         * array index p + arrayOffset().
         *
         * Invoke the hasArray method before invoking this method in order to ensure
         * that this buffer has an accessible backing array.
         *
         * @return The offset within this buffer's array of the first element of
         *          the buffer.
         *
         * @throws ReadOnlyBufferException if this buffer is backed by an array but
         *         is read-only.
         * @throws UnsupportedOperationException if this buffer is not backed by an
         *         accessible array.
         */
        virtual int arrayOffset() const = 0;

        /**
         * Tells whether or not this buffer is backed by an accessible byte array.
         * If this method returns true then the array and arrayOffset methods may safely
         * be invoked.  Subclasses should override this method if they do not have a
         * backing array as this class always returns true.
         *
         * @return true if, and only if, this buffer is backed by an array and is not
         *          read-only.
         */
        virtual bool hasArray() const = 0;

        /**
         * Creates a view of this byte buffer as a char buffer.
         *
         * The content of the new buffer will start at this buffer's current position.
         * Changes to this buffer's content will be visible in the new buffer, and vice
         * versa; the two buffers' position, limit, and mark values will be independent.
         *
         * The new buffer's position will be zero, its capacity and its limit will be
         * the number of bytes remaining in this buffer, and its mark will be undefined.
         * The new buffer will be read-only if, and only if, this buffer is read-only.
         *
         * @return the new Char Buffer, which the caller then owns.
         */
        virtual CharBuffer* asCharBuffer() const = 0;

        /**
         * Creates a view of this byte buffer as a double buffer.
         *
         * The content of the new buffer will start at this buffer's current position.
         * Changes to this buffer's content will be visible in the new buffer, and vice
         * versa; the two buffers' position, limit, and mark values will be independent.
         *
         * The new buffer's position will be zero, its capacity and its limit will be
         * the number of bytes remaining in this buffer divided by eight, and its mark
         * will be undefined. The new buffer will be read-only if, and only if, this
         * buffer is read-only.
         *
         * @return the new double Buffer, which the caller then owns.
         */
        virtual DoubleBuffer* asDoubleBuffer() const = 0;

        /**
         * Creates a view of this byte buffer as a float buffer.
         *
         * The content of the new buffer will start at this buffer's current position.
         * Changes to this buffer's content will be visible in the new buffer, and vice
         * versa; the two buffers' position, limit, and mark values will be independent.
         *
         * The new buffer's position will be zero, its capacity and its limit will be
         * the number of bytes remaining in this buffer divided by four, and its mark
         * will be undefined. The new buffer will be read-only if, and only if, this
         * buffer is read-only.
         *
         * @return the new float Buffer, which the caller then owns.
         */
        virtual FloatBuffer* asFloatBuffer() const = 0;

        /**
         * Creates a view of this byte buffer as a int buffer.
         *
         * The content of the new buffer will start at this buffer's current position.
         * Changes to this buffer's content will be visible in the new buffer, and vice
         * versa; the two buffers' position, limit, and mark values will be independent.
         *
         * The new buffer's position will be zero, its capacity and its limit will be
         * the number of bytes remaining in this buffer divided by four, and its mark
         * will be undefined. The new buffer will be read-only if, and only if, this
         * buffer is read-only.
         *
         * @return the new int Buffer, which the caller then owns.
         */
        virtual IntBuffer* asIntBuffer() const = 0;

        /**
         * Creates a view of this byte buffer as a long buffer.
         *
         * The content of the new buffer will start at this buffer's current position.
         * Changes to this buffer's content will be visible in the new buffer, and vice
         * versa; the two buffers' position, limit, and mark values will be independent.
         *
         * The new buffer's position will be zero, its capacity and its limit will be
         * the number of bytes remaining in this buffer divided by eight, and its mark
         * will be undefined. The new buffer will be read-only if, and only if, this
         * buffer is read-only.
         *
         * @return the new long Buffer, which the caller then owns.
         */
        virtual LongBuffer* asLongBuffer() const = 0;

        /**
         * Creates a view of this byte buffer as a short buffer.
         *
         * The content of the new buffer will start at this buffer's current position.
         * Changes to this buffer's content will be visible in the new buffer, and vice
         * versa; the two buffers' position, limit, and mark values will be independent.
         *
         * The new buffer's position will be zero, its capacity and its limit will be
         * the number of bytes remaining in this buffer divided by two, and its mark
         * will be undefined. The new buffer will be read-only if, and only if, this
         * buffer is read-only.
         *
         * @return the new short Buffer, which the caller then owns.
         */
        virtual ShortBuffer* asShortBuffer() const = 0;

        /**
         * Creates a new, read-only byte buffer that shares this buffer's content.
         *
         * The content of the new buffer will be that of this buffer. Changes to this
         * buffer's content will be visible in the new buffer; the new buffer itself,
         * however, will be read-only and will not allow the shared content to be
         * modified. The two buffers' position, limit, and mark values will be
         * independent.
         *
         * If this buffer is itself read-only then this method behaves in exactly the
         * same way as the duplicate method.
         *
         * The new buffer's capacity, limit, position, and mark values will be
         * identical to those of this buffer.
         *
         * @return The new, read-only byte buffer which the caller then owns.
         */
        virtual ByteBuffer* asReadOnlyBuffer() const = 0;

        /**
         * Compacts this buffer
         *
         * The bytes between the buffer's current position and its limit, if any, are
         * copied to the beginning of the buffer. That is, the byte at index
         * p = position() is copied to index zero, the byte at index p + 1 is copied
         * to index one, and so forth until the byte at index limit() - 1 is copied
         * to index n = limit() - 1 - p. The buffer's position is then set to n+1 and
         * its limit is set to its capacity. The mark, if defined, is discarded.
         *
         * The buffer's position is set to the number of bytes copied, rather than to
         * zero, so that an invocation of this method can be followed immediately by
         * an invocation of another relative put method.
         *
         * @return a reference to this ByteBuffer.
         *
         * @throws ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& compact() = 0;

        /**
         * Creates a new byte buffer that shares this buffer's content.
         *
         * The content of the new buffer will be that of this buffer. Changes to this
         * buffer's content will be visible in the new buffer, and vice versa; the two
         * buffers' position, limit, and mark values will be independent.
         *
         * The new buffer's capacity, limit, position, and mark values will be identical
         * to those of this buffer. The new buffer will be read-only if, and only if,
         * this buffer is read-only.
         *
         * @return a new Byte Buffer which the caller owns.
         */
        virtual ByteBuffer* duplicate() = 0;

        /**
         * Relative get method. Reads the byte at this buffer's current position, and
         * then increments the position.
         *
         * @return The byte at the buffer's current position.
         *
         * @throws BufferUnderflowException if the buffer's current position is not
         *         smaller than its limit.
         */
        virtual unsigned char get() const = 0;

        /**
         * Absolute get method. Reads the byte at the given index.
         *
         * @param index
         *      The index in the Buffer where the byte is to be read.
         *
         * @return the byte that is located at the given index.
         *
         * @throws IndexOutOfBoundsException if index is not smaller than the
         *         buffer's limit, or index is negative.
         */
        virtual unsigned char get(int index) const = 0;

        /**
         * Reads the next byte at this buffer's current position, and then increments
         * the position by one
         *
         * @return the next char in the buffer.
         *
         * @throws BufferUnderflowException if there are no more bytes remaining in
         *         this buffer, meaning we have reached the set limit.
         */
        virtual char getChar() = 0;

        /**
         * Reads one byte at the given index and returns it.
         *
         * @param index
         *      The index in the Buffer where the byte is to be read.
         *
         * @return the char at the given index in the buffer
         *
         * @throws IndexOutOfBoundsException if index is not smaller than the
         *         buffer's limit, or index is negative.
         */
        virtual char getChar(int index) const = 0;

        /**
         * Reads the next eight bytes at this buffer's current position, and then
         * increments the position by that amount.
         *
         * @return the next double in the buffer.
         *
         * @throws BufferUnderflowException if there are no more bytes remaining in
         *         this buffer, meaning we have reached the set limit.
         */
        virtual double getDouble() = 0;

        /**
         * Reads eight bytes at the given index and returns it
         *
         * @param index
         *      The index in the Buffer where the bytes are to be read.
         *
         * @return the double at the given index in the buffer.
         *
         * @throws IndexOutOfBoundsException if index is not smaller than the
         *         buffer's limit, or index is negative.
         */
        virtual double getDouble(int index) const = 0;

        /**
         * Reads the next four bytes at this buffer's current position, and then
         * increments the position by that amount.
         *
         * @return the next float in the buffer.
         *
         * @throws BufferUnderflowException if there are no more bytes remaining in
         *         this buffer, meaning we have reached the set limit.
         */
        virtual float getFloat() = 0;

        /**
         * Reads four bytes at the given index and returns it.
         *
         * @param index
         *      The index in the Buffer where the bytes are to be read.
         *
         * @return the float at the given index in the buffer.
         *
         * @throws IndexOutOfBoundsException if there are not enough bytes
         *         remaining to fill the requested Data Type, or index is negative.
         */
        virtual float getFloat(int index) const = 0;

        /**
         * Reads the next eight bytes at this buffer's current position, and then
         * increments the position by that amount.
         *
         * @return the next long long in the buffer.
         *
         * @throws BufferUnderflowException if there are no more bytes remaining in
         *         this buffer, meaning we have reached the set limit.
         */
        virtual long long getLong() = 0;

        /**
         * Reads eight bytes at the given index and returns it.
         *
         * @param index
         *      The index in the Buffer where the bytes are to be read.
         *
         * @return the long long at the given index in the buffer.
         *
         * @throws IndexOutOfBoundsException if there are not enough bytes
         *         remaining to fill the requested Data Type, or index is negative.
         */
        virtual long long getLong(int index) const = 0;

        /**
         * Reads the next four bytes at this buffer's current position, and then
         * increments the position by that amount.
         *
         * @return the next int in the buffer.
         *
         * @throws BufferUnderflowException if there are no more bytes remaining in
         *         this buffer, meaning we have reached the set limit.
         */
        virtual int getInt() = 0;

        /**
         * Reads four bytes at the given index and returns it.
         *
         * @param index
         *      The index in the Buffer where the bytes are to be read.
         *
         * @return the int at the given index in the buffer.
         *
         * @throws IndexOutOfBoundsException if there are not enough bytes
         *         remaining to fill the requested Data Type, or index is negative.
         */
        virtual int getInt(int index) const = 0;

        /**
         * Reads the next two bytes at this buffer's current position, and then
         * increments the position by that amount.
         *
         * @return the next short in the buffer.
         *
         * @throws BufferUnderflowException if there are no more bytes remaining in
         *         this buffer, meaning we have reached the set limit.
         */
        virtual short getShort() = 0;

        /**
         * Reads two bytes at the given index and returns it.
         *
         * @param index
         *      The index in the Buffer where the bytes are to be read.
         *
         * @return the short at the given index in the buffer.
         *
         * @throws IndexOutOfBoundsException if there are not enough bytes
         *         remaining to fill the requested Data Type, or index is negative.
         */
        virtual short getShort(int index) const = 0;

        /**
         * Writes the given byte into this buffer at the current position, and then
         * increments the position.
         *
         * @param value - the byte value to be written.
         *
         * @return a reference to this buffer.
         *
         * @throws BufferOverflowException if this buffer's current position is not
         *         smaller than its limit.
         * @throws ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& put(unsigned char value) = 0;

        /**
         * Writes the given byte into this buffer at the given index.
         *
         * @param index - position in the Buffer to write the data
         * @param value - the byte to write.
         *
         * @return a reference to this buffer.
         *
         * @throw IndexOutOfBoundsException if index greater than the buffer's limit
         *        minus the size of the type being written, or index is negative.
         * @throw ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& put(int index, unsigned char value) = 0;

        /**
         * Writes one byte containing the given value, into this buffer at the
         * current position, and then increments the position by one.
         *
         * @param value
         *      The value to be written.
         *
         * @return a reference to this buffer.
         *
         * @throw BufferOverflowException if there are fewer than bytes remaining
         *        in this buffer than the size of the data to be written
         * @throw ReadOnlyBufferException if this buffer is read-only
         */
        virtual ByteBuffer& putChar(char value) = 0;

        /**
         * Writes one byte containing the given value, into this buffer at the
         * given index.
         *
         * @param index
         *      The position in the Buffer to write the data.
         * @param value
         *      The value to write.
         *
         * @return a reference to this buffer.
         *
         * @throw IndexOutOfBoundsException if index greater than the buffer's limit
         *        minus the size of the type being written, or index is negative.
         * @throw ReadOnlyBufferException if this buffer is read-only
         */
        virtual ByteBuffer& putChar(int index, char value) = 0;

        /**
         * Writes eight bytes containing the given value, into this buffer at the
         * current position, and then increments the position by eight.
         *
         * @param value
         *      The value to be written.
         *
         * @return a reference to this buffer.
         *
         * @throw BufferOverflowException if there are fewer than bytes remaining
         *        in this buffer than the size of the data to be written
         * @throw ReadOnlyBufferException if this buffer is read-only
         */
        virtual ByteBuffer& putDouble(double value) = 0;

        /**
         * Writes eight bytes containing the given value, into this buffer at the
         * given index.
         *
         * @param index
         *      The position in the Buffer to write the data
         * @param value
         *      The value to write.
         *
         * @return a reference to this buffer.
         *
         * @throw IndexOutOfBoundsException if index greater than the buffer's limit
         *        minus the size of the type being written, or index is negative.
         * @throw ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& putDouble(int index, double value) = 0;

        /**
         * Writes four bytes containing the given value, into this buffer at the
         * current position, and then increments the position by eight.
         *
         * @param value
         *      The value to be written.
         *
         * @return a reference to this buffer.
         *
         * @throw BufferOverflowException if there are fewer than bytes remaining
         *        in this buffer than the size of the data to be written.
         * @throw ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& putFloat(float value) = 0;

        /**
         * Writes four bytes containing the given value, into this buffer at the
         * given index.
         *
         * @param index
         *      The position in the Buffer to write the data
         * @param value
         *      The value to write.
         *
         * @return a reference to this buffer.
         *
         * @throw IndexOutOfBoundsException if index greater than the buffer's limit
         *        minus the size of the type being written, or index is negative.
         * @throw ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& putFloat(int index, float value) = 0;

        /**
         * Writes eight bytes containing the given value, into this buffer at the
         * current position, and then increments the position by eight.
         *
         * @param value
         *      The value to be written.
         *
         * @return a reference to this buffer.
         *
         * @throw BufferOverflowException if there are fewer than bytes remaining
         *        in this buffer than the size of the data to be written.
         * @throw ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& putLong(long long value) = 0;

        /**
         * Writes eight bytes containing the given value, into this buffer at the
         * given index.
         *
         * @param index
         *      The position in the Buffer to write the data.
         * @param value
         *      The value to write.
         *
         * @return a reference to this buffer.
         *
         * @throw IndexOutOfBoundsException if index greater than the buffer's limit
         *        minus the size of the type being written, or index is negative.
         * @throw ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& putLong(int index, long long value) = 0;

        /**
         * Writes four bytes containing the given value, into this buffer at the
         * current position, and then increments the position by eight.
         *
         * @param value
         *      The value to be written.
         *
         * @return a reference to this buffer.
         *
         * @throw BufferOverflowException if there are fewer than bytes remaining
         *        in this buffer than the size of the data to be written
         * @throw ReadOnlyBufferException if this buffer is read-only
         */
        virtual ByteBuffer& putInt(int value) = 0;

        /**
         * Writes four bytes containing the given value, into this buffer at the
         * given index.
         *
         * @param index
         *      The position in the Buffer to write the data.
         * @param value
         *      The value to write.
         *
         * @return a reference to this buffer
         *
         * @throw IndexOutOfBoundsException if index greater than the buffer's limit
         *        minus the size of the type being written, or index is negative.
         * @throw ReadOnlyBufferException if this buffer is read-only
         */
        virtual ByteBuffer& putInt(int index, int value) = 0;

        /**
         * Writes two bytes containing the given value, into this buffer at the
         * current position, and then increments the position by eight.
         *
         * @param value
         *      The value to be written.
         *
         * @return a reference to this buffer.
         *
         * @throw BufferOverflowException if there are fewer than bytes remaining
         *        in this buffer than the size of the data to be written.
         * @throw ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& putShort(short value) = 0;

        /**
         * Writes two bytes containing the given value, into this buffer at the
         * given index.
         *
         * @param index
         *      The position in the Buffer to write the data
         * @param value
         *      The value to write.
         *
         * @return a reference to this buffer
         *
         * @throw IndexOutOfBoundsException if index greater than the buffer's limit
         *        minus the size of the type being written, or index is negative.
         * @throw ReadOnlyBufferException if this buffer is read-only.
         */
        virtual ByteBuffer& putShort(int index, short value) = 0;

        /**
         * Creates a new byte buffer whose content is a shared subsequence of this
         * buffer's content.  The content of the new buffer will start at this buffer's
         * current position. Changes to this buffer's content will be visible in the new
         * buffer, and vice versa; the two buffers' position, limit, and mark values will
         * be independent.
         *
         * The new buffer's position will be zero, its capacity and its limit will be the
         * number of bytes remaining in this buffer, and its mark will be undefined. The
         * new buffer will be read-only if, and only if, this buffer is read-only.
         *
         * @return the newly create ByteBuffer which the caller owns.
         */
        virtual ByteBuffer* slice() const = 0;

    public:
        // Comparable

        /**
         * {@inheritDoc}
         */
        virtual int compareTo(const ByteBuffer& value) const;

        /**
         * {@inheritDoc}
         */
        virtual bool equals(const ByteBuffer& value) const;

        /**
         * {@inheritDoc}
         */
        virtual bool operator==(const ByteBuffer& value) const;

        /**
         * {@inheritDoc}
         */
        virtual bool operator<(const ByteBuffer& value) const;

    public:

        /**
         * Allocates a new byte buffer whose position will be zero its limit will
         * be its capacity and its mark is not set.
         *
         * @param capacity
         *      The internal buffer's capacity.
         *
         * @return a newly allocated ByteBuffer which the caller owns.
         *
         * @throws IllegalArgumentException if capacity is negative.
         */
        static ByteBuffer* allocate(int capacity);

        /**
         * Wraps the passed buffer with a new ByteBuffer.
         *
         * The new buffer will be backed by the given byte array; that is, modifications
         * to the buffer will cause the array to be modified and vice versa. The new
         * buffer's capacity will be array.length, its position will be offset, its limit
         * will be offset + length, and its mark will be undefined. Its backing array
         * will be the given array, and its array offset will be zero.
         *
         * @param array
         *      The array that will back the new buffer.
         * @param size
         *      The size of the provided array.
         * @param offset
         *      The offset of the subarray to be used.
         * @param length
         *      The length of the subarray to be used.
         *
         * @return a new ByteBuffer that is backed by buffer, caller owns.
         *
         * @throws NullPointerException if the array passed in is NULL.
         * @throws IndexOutOfBoundsException if the preconditions of size, offset, or length
         *         are not met.
         */
        static ByteBuffer* wrap(unsigned char* array, int size, int offset, int length);

        /**
         * Wraps the passed STL Byte Vector in a ByteBuffer.
         *
         * The new buffer will be backed by the given byte array; modifications to the
         * buffer will cause the array to be modified and vice versa. The new buffer's
         * capacity and limit will be buffer.size(), its position will be zero, and its
         * mark will be undefined. Its backing array will be the given array, and its
         * array offset will be zero.
         *
         * @param buffer
         *      The vector that will back the new buffer, the vector must
         *      have been sized to the desired size already by calling vector.resize( N ).
         *
         * @return a new ByteBuffer that is backed by buffer, caller owns.
         */
        static ByteBuffer* wrap(std::vector<unsigned char>& buffer);

    };

}}

#endif /*_DECAF_NIO_BYTEBUFFER_H_*/