src/main/xsd/j2ee_web_services_client_1_1.xsd

<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
	    targetNamespace="http://java.sun.com/xml/ns/j2ee"
	    xmlns:j2ee="http://java.sun.com/xml/ns/j2ee"
	    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
	    elementFormDefault="qualified"
	    attributeFormDefault="unqualified"
	    version="1.1">
  <xsd:annotation>
    <xsd:documentation>
      @(#)j2ee_web_services_client_1_1.xsds	1.10 02/11/03
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.

      Copyright 2003-2007 Sun Microsystems, Inc. All rights reserved.

      The contents of this file are subject to the terms of either the
      GNU General Public License Version 2 only ("GPL") or the Common
      Development and Distribution License("CDDL") (collectively, the
      "License").  You may not use this file except in compliance with
      the License. You can obtain a copy of the License at
      https://glassfish.dev.java.net/public/CDDL+GPL.html or
      glassfish/bootstrap/legal/LICENSE.txt.  See the License for the
      specific language governing permissions and limitations under the
      License.

      When distributing the software, include this License Header
      Notice in each file and include the License file at
      glassfish/bootstrap/legal/LICENSE.txt.  Sun designates this
      particular file as subject to the "Classpath" exception as
      provided by Sun in the GPL Version 2 section of the License file
      that accompanied this code.  If applicable, add the following
      below the License Header, with the fields enclosed by brackets []
      replaced by your own identifying information:
      "Portions Copyrighted [year] [name of copyright owner]"

      Contributor(s):

      If you wish your version of this file to be governed by only the
      CDDL or only the GPL Version 2, indicate your decision by adding
      "[Contributor] elects to include this software in this
      distribution under the [CDDL or GPL Version 2] license."  If you
      don't indicate a single choice of license, a recipient has the
      option to distribute your version of this file under either the
      CDDL, the GPL Version 2 or to extend the choice of license to its
      licensees as provided above.  However, if you add GPL Version 2
      code and therefore, elected the GPL Version 2 license, then the
      option applies only if the new code is made subject to such
      option by the copyright holder.

    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      (C) Copyright International Business Machines Corporation 2002

    </xsd:documentation>
  </xsd:annotation>


<!-- **************************************************** -->

  <xsd:complexType name="port-component-refType">
    <xsd:annotation>
      <xsd:documentation>

	The port-component-ref element declares a client dependency
	on the container for resolving a Service Endpoint Interface
	to a WSDL port. It optionally associates the Service Endpoint
	Interface with a particular port-component. This is only used
	by the container for a Service.getPort(Class) method call.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:element name="service-endpoint-interface"
		   type="j2ee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>

	    The service-endpoint-interface element defines a fully qualified
	    Java class that represents the Service Endpoint Interface of a
	    WSDL port.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="port-component-link"
		   type="j2ee:string"
		   minOccurs="0" maxOccurs="1">
	<xsd:annotation>
	  <xsd:documentation>

	    The port-component-link element links a port-component-ref
	    to a specific port-component required to be made available
	    by a service reference.

	    The value of a port-component-link must be the
	    port-component-name of a port-component in the same module
	    or another module in the same application unit. The syntax
	    for specification follows the syntax defined for ejb-link
	    in the EJB 2.0 specification.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:group name="service-refGroup">
    <xsd:sequence>
      <xsd:element name="service-ref"
		   type="j2ee:service-refType"
		   minOccurs="0" maxOccurs="unbounded">
	<xsd:key name="service-ref_handler-name-key">
	  <xsd:annotation>
	    <xsd:documentation>

	      Defines the name of the handler. The name must be unique
	      within the module.

	    </xsd:documentation>
	  </xsd:annotation>
	  <xsd:selector xpath="j2ee:handler"/>
	  <xsd:field xpath="j2ee:handler-name"/>
	</xsd:key>
      </xsd:element>
    </xsd:sequence>
  </xsd:group>

<!-- **************************************************** -->

  <xsd:complexType name="service-refType">
    <xsd:annotation>
      <xsd:documentation>

	The service-ref element declares a reference to a Web
	service. It contains optional description, display name and
	icons, a declaration of the required Service interface,
	an optional WSDL document location, an optional set
	of JAX-RPC mappings, an optional QName for the service element,
	an optional set of Service Endpoint Interfaces to be resolved
	by the container to a WSDL port, and an optional set of handlers.

      </xsd:documentation>
    </xsd:annotation>

    <xsd:sequence>
      <xsd:group ref="j2ee:descriptionGroup"/>
      <xsd:element name="service-ref-name"
		   type="j2ee:jndi-nameType">
	<xsd:annotation>
	  <xsd:documentation>

	    The service-ref-name element declares logical name that the
	    components in the module use to look up the Web service. It
	    is recommended that all service reference names start with
	    "service/".

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="service-interface"
		   type="j2ee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>

	    The service-interface element declares the fully qualified class
	    name of the JAX-RPC Service interface the client depends on.
	    In most cases the value will be javax.xml.rpc.Service.  A JAX-RPC
	    generated Service Interface class may also be specified.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="wsdl-file"
		   type="j2ee:xsdAnyURIType"
		   minOccurs="0" maxOccurs="1">
	<xsd:annotation>
	  <xsd:documentation>

	    The wsdl-file element contains the URI location of a WSDL
	    file. The location is relative to the root of the module.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="jaxrpc-mapping-file"
		   type="j2ee:pathType"
		   minOccurs="0" maxOccurs="1">
	<xsd:annotation>
	  <xsd:documentation>

	    The jaxrpc-mapping-file element contains the name of a file that
	    describes the JAX-RPC mapping between the Java interaces used by
	    the application and the WSDL description in the wsdl-file.  The
	    file name is a relative path within the module file.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="service-qname"
		   type="j2ee:xsdQNameType"
		   minOccurs="0" maxOccurs="1">
	<xsd:annotation>
	  <xsd:documentation>

	    The service-qname element declares the specific WSDL service
	    element that is being refered to.  It is not specified if no
	    wsdl-file is declared.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="port-component-ref"
		   type="j2ee:port-component-refType"
		   minOccurs="0" maxOccurs="unbounded">
	<xsd:annotation>
	  <xsd:documentation>

	    The port-component-ref element declares a client dependency
	    on the container for resolving a Service Endpoint Interface
	    to a WSDL port. It optionally associates the Service Endpoint
	    Interface with a particular port-component. This is only used
	    by the container for a Service.getPort(Class) method call.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="handler"
		   type="j2ee:service-ref_handlerType"
		   minOccurs="0" maxOccurs="unbounded">
	<xsd:annotation>
	  <xsd:documentation>

	    Declares the handler for a port-component. Handlers can
	    access the init-param name/value pairs using the
	    HandlerInfo interface. If port-name is not specified, the
	    handler is assumed to be associated with all ports of the
	    service.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

<!-- **************************************************** -->

  <xsd:complexType name="service-ref_handlerType">
    <xsd:annotation>
      <xsd:documentation>

	Declares the handler for a port-component. Handlers can access the
	init-param name/value pairs using the HandlerInfo interface. If
	port-name is not specified, the handler is assumed to be associated
	with all ports of the service.

	Used in: service-ref

      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:group ref="j2ee:descriptionGroup"/>
      <xsd:element name="handler-name"
		   type="j2ee:string">
	<xsd:annotation>
	  <xsd:documentation>

	    Defines the name of the handler. The name must be unique
	    within the module.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="handler-class"
		   type="j2ee:fully-qualified-classType">
	<xsd:annotation>
	  <xsd:documentation>

	    Defines a fully qualified class name for the handler
	    implementation.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
      <xsd:element name="init-param"
		   type="j2ee:param-valueType"
		   minOccurs="0" maxOccurs="unbounded"/>

      <xsd:element name="soap-header"
		   type="j2ee:xsdQNameType"
		   minOccurs="0" maxOccurs="unbounded">
	<xsd:annotation>
	  <xsd:documentation>

	    Defines the QName of a SOAP header that will be processed
	    by the handler.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="soap-role"
		   type="j2ee:string"
		   minOccurs="0" maxOccurs="unbounded">
	<xsd:annotation>
	  <xsd:documentation>

	    The soap-role element contains a SOAP actor definition that
	    the Handler will play as a role.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>

      <xsd:element name="port-name"
		   type="j2ee:string"
		   minOccurs="0" maxOccurs="unbounded">
	<xsd:annotation>
	  <xsd:documentation>

	    The port-name element defines the WSDL port-name that a
	    handler should be associated with.

	  </xsd:documentation>
	</xsd:annotation>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id" type="xsd:ID"/>
  </xsd:complexType>

</xsd:schema>