| # OJB.properties -- configuration of the OJB runtime environment |
| # Version: 1.0 |
| # (c) 2001, 2002, 2003 Apache Software Foundation |
| # Author: Thomas Mahler and many others |
| # @version $Id: OJB.properties,v 1.1 2004/02/03 11:12:04 antonio Exp $ |
| # |
| #---------------------------------------------------------------------------------------- |
| # repository file settings |
| #---------------------------------------------------------------------------------------- |
| # The repositoryFile entry tells OJB to use this file as as its standard mapping |
| # repository. The file is looked up from the classpath. |
| # |
| repositoryFile=repository.xml |
| # |
| # If the useSerializedRepository entry is set to true, OJB tries to load a |
| # serialized version of the repository for performance reasons. |
| # if set to false, OJB always loads the xml file. |
| # Setting this flag to true will accelerate the startup sequence of OJB. |
| # If set to true changes to the repository.xml file will only be detected |
| # after maually deleting the repository.xml.serialized file. |
| useSerializedRepository=false |
| # |
| # If Repository serialization is used the entry serializedRepositoryPath defines the |
| # directory where the Repository is written to and read from. |
| # this entry is used only when the useSerializedRepository flag is set to true |
| # |
| serializedRepositoryPath=. |
| # |
| #---------------------------------------------------------------------------------------- |
| # PersistenceBrokerFactory / PersistenceBroker |
| #---------------------------------------------------------------------------------------- |
| # The PersistenceBrokerFactoryClass entry decides which concrete |
| # PersistenceBrokerFactory implemention is to be used. |
| PersistenceBrokerFactoryClass=org.apache.ojb.broker.core.PersistenceBrokerFactoryDefaultImpl |
| # |
| # The PersistenceBrokerClass entry decides which concrete PersistenceBroker |
| # implementation is to be served by the PersistenceBrokerFactory. |
| # This is the singlevm implementation: |
| PersistenceBrokerClass=org.apache.ojb.broker.core.PersistenceBrokerImpl |
| # |
| # This is an implementation that uses Prevayler (prevayler.sf.net) as the persistent storage. |
| # Using this implementation OJB works as a simple OODBMS |
| #PersistenceBrokerClass=org.apache.ojb.broker.prevayler.PBPrevaylerImpl |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # PersistenceBrokerFactory pool |
| #---------------------------------------------------------------------------------------- |
| # PersistenceBroker pool configuration |
| # This pool uses the jakarta-commons-pool api. |
| # There you can find things described in detail. |
| # |
| # maximum number of brokers that can be borrowed from the |
| # pool at one time. When non-positive, there is no limit. |
| maxActive=100 |
| # |
| # controls the maximum number of brokers that can sit idle in the |
| # pool (per key) at any time. When non-positive, there is no limit |
| maxIdle=-1 |
| # |
| # max time block to get broker instance from pool, after that exception is thrown. |
| # When non-positive, block till last judgement |
| maxWait=2000 |
| # |
| # indicates how long the eviction thread should sleep before "runs" of examining |
| # idle objects. When non-positive, no eviction thread will be launched. |
| timeBetweenEvictionRunsMillis=-1 |
| # |
| # specifies the minimum amount of time that an broker may sit idle |
| # in the pool before it is eligable for eviction due to idle time. |
| # When non-positive, no object will be dropped from the pool due |
| # to idle time alone (depends on timeBetweenEvictionRunsMillis > 0) |
| minEvictableIdleTimeMillis=1000000 |
| # |
| # specifies the behaviour of the pool when broker capacity is |
| # exhausted (see maxActive above) |
| # 0 - fail |
| # 1 - block |
| # 2 - grow |
| whenExhaustedAction=0 |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # ConnectionFactory / Default ConnectionPool |
| #---------------------------------------------------------------------------------------- |
| # The ConnectionFactoryClass entry determines which kind of ConnectionFactory |
| # is to be used within org.apache.ojb as connection factory. |
| # A ConnectionFactory is responsible for creating |
| # JDBC Connections. Current version ships four implementations: |
| # |
| # 1. ConnectionFactoryAvalonDatasource |
| # Uses a Cocoon configured DataSource specified with the jcd-alias attribute value in |
| # a jdbc-connection-descriptor element in the repository.xml file. |
| # 2. ConnectionFactoryNotPooledImpl |
| # No pooling, no playing around. |
| # Every connection request returns a new connection, |
| # every connection release close the connection. |
| # 3. ConnectionFactoryPooledImpl |
| # This implementation supports connection pooling. |
| # 4. ConnectionFactoryDBCPImpl |
| # Using the jakarta-DBCP api for connection management, support |
| # connection- and prepared statement-pooling, abandoned connection handling. |
| # 5. ConnectionFactoryManagedImpl |
| # Connection factory for use within managed environments - e.g. JBoss. |
| # Every obtained DataSource was wrapped within OJB (and ignore |
| # e.g. con.commit() calls within OJB). |
| # Use this implementation e.g if you use Datasources from an application server. |
| # |
| # Use the OJB performance tests to decide, which implementation is best for you. |
| # The proper way of obtaining a connection is configured in |
| # JDBCConnectionDescriptor entries in the repository.xml file. |
| # If want a more fine grained control of each connection pool used by OJB, |
| # take a look at the repository.dtd, there was a possibility to override |
| # this default connection factory entry in each JDBCConnectionDescriptor. |
| # |
| ConnectionFactoryClass=org.apache.cocoon.ojb.components.ConnectionFactoryAvalonDataSource |
| #ConnectionFactoryClass=org.apache.ojb.broker.accesslayer.ConnectionFactoryPooledImpl |
| #ConnectionFactoryClass=org.apache.ojb.broker.accesslayer.ConnectionFactoryNotPooledImpl |
| #ConnectionFactoryClass=org.apache.ojb.broker.accesslayer.ConnectionFactoryManagedImpl |
| #ConnectionFactoryClass=org.apache.ojb.broker.accesslayer.ConnectionFactoryDBCPImpl |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # ConnectionManager |
| #---------------------------------------------------------------------------------------- |
| # The ConnectionManagerClass entry defines the ConnectionManager implemementation to be used |
| ConnectionManagerClass=org.apache.ojb.broker.accesslayer.ConnectionManagerImpl |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # SqlGenerator |
| #---------------------------------------------------------------------------------------- |
| # The SqlGeneratorClass entry defines the SqlGenerator implemementation to be used |
| SqlGeneratorClass=org.apache.ojb.broker.accesslayer.sql.SqlGeneratorDefaultImpl |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # CollectionProxy class |
| #---------------------------------------------------------------------------------------- |
| # The optional CollectionProxy entry defines the class to be used for CollectionProxies |
| # if this entry is null org.apache.ojb.broker.accesslayer.ListProxy is used for Lists |
| # and org.apache.ojb.broker.accesslayer.CollectionProxy for Collections |
| # |
| #CollectionProxyClass= |
| # |
| #---------------------------------------------------------------------------------------- |
| # StatementManager |
| #---------------------------------------------------------------------------------------- |
| # The StatementManagerClass entry defines the StatementManager implemementation to be used |
| StatementManagerClass=org.apache.ojb.broker.accesslayer.StatementManager |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # StatementsForClass |
| #---------------------------------------------------------------------------------------- |
| # The StatementsForClassClass entry defines the StatementsForClass implemementation to be used |
| # to implement cached statements. |
| StatementsForClassClass=org.apache.ojb.broker.accesslayer.StatementsForClassImpl |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # JdbcAccess |
| #---------------------------------------------------------------------------------------- |
| # The JdbcAccessClass entry defines the JdbcAccess implemementation to be used |
| JdbcAccessClass=org.apache.ojb.broker.accesslayer.JdbcAccessImpl |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # Object cache |
| #---------------------------------------------------------------------------------------- |
| # The ObjectCacheClass entry tells OJB which concrete ObjectCache |
| # implementation is to be used as standard cache. |
| # Its also possible to override this entry adding object-cache elements |
| # on jdbc-connection-descriptor level and |
| # per class-descriptor in repository file. More info see documentation. |
| # |
| ObjectCacheClass=org.apache.ojb.broker.cache.ObjectCacheDefaultImpl |
| #ObjectCacheClass=org.apache.ojb.broker.cache.ObjectCacheEmptyImpl |
| #ObjectCacheClass=org.apache.ojb.broker.cache.ObjectCachePerBrokerImpl |
| #ObjectCacheClass=org.apache.ojb.broker.cache.ObjectCacheJCSPerClassImpl |
| #ObjectCacheClass=org.apache.ojb.broker.cache.ObjectCachePerClassImpl |
| # |
| # |
| # This property is only relevant if the per class-descriptor object-cache |
| # declaration was used in conjunction with metadata runtime changes. |
| # If set 'flase' the class name of the object is used |
| # to find a per class ObjectCache implementation. |
| # If set 'true' the ObjectCacheDescriptor instance is used as key to |
| # find a per class ObjectCache, this enables to use different ObjectCache |
| # instances for the same class. |
| descriptorBasedCaches=false |
| # |
| # |
| # Use CacheFilters to do filter operations before caching methods were |
| # called. Build your own filter class by implementing org.apache.ojb.cache.CacheFilter. |
| # It is possible to use a arbitrary number of CacheFilters, but this slows |
| # down the performance of the cache, thus handle with care. |
| # |
| # - org.apache.ojb.broker.cache.CacheFilterClassImpl |
| # allows filtering of classes |
| # - org.apache.ojb.broker.cache.CacheFilterPackageImpl |
| # allows filtering of packages |
| # More info see Javadoc of the according classes. |
| # Set a comma separated list of CacheFilter. |
| #ObjectCacheFilter=org.apache.ojb.broker.cache.CacheFilterClassImpl,org.apache.ojb.broker.cache.CacheFilterPackageImpl |
| # |
| #---------------------------------------------------------------------------------------- |
| # Locking |
| #---------------------------------------------------------------------------------------- |
| # The LockManagerClass entry tells OJB which concrete LockManager |
| # implementation is to be used. |
| LockManagerClass=org.apache.ojb.odmg.locking.LockManagerDefaultImpl |
| # |
| # The LockMapClass entry tells OJB which concrete LockMap |
| # implementation is to be used. |
| # If OJB is running on multiple concurrent clients it is recommended |
| # to use the PersistentLockMapImpl. It guarantees to provide |
| # Lockamanagement across multiple JVMs. |
| # If OJB is running in a single JVM (e.g. in a desktop app, or in a servlet |
| # engine) it is save to use the InMemoryLockMapImpl. Using it will result |
| # in a large performance gain. |
| # LockMapClass=org.apache.ojb.odmg.locking.PersistentLockMapImpl |
| LockMapClass=org.apache.ojb.odmg.locking.InMemoryLockMapImpl |
| # |
| # The LockTimeout entry defines the maximum time in milliseconds |
| # that a lock may be hold. Defaults to 60000 = 1 minute |
| LockTimeout=60000 |
| # |
| # The ImplicitLocking entry defines if implicit lock acquisition is |
| # to be used. If set to true OJB implicitely locks objects to ODMG |
| # transactions after performing OQL queries. |
| # If implicit locking is used locking objects is recursive, that is |
| # associated objects are also locked. |
| # If ImplicitLocking is set to false, no locks are obtained in OQL |
| # queries and there is also no recursive locking. |
| ImplicitLocking=true |
| #ImplicitLocking=false |
| # |
| # The LockAssociations entry defines the behaviour for the OJB |
| # implicit locking feature. If set to WRITE (default) acquiring a write- |
| # lock on a given object x implies write locks on all objects associated |
| # to x. If set to READ implicit read-locks are acquired. |
| # Acquiring a read-lock on x thus allways results in implicit read-locks |
| # on all associated objects. |
| #LockAssociations=READ |
| LockAssociations=WRITE |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # Logging |
| #---------------------------------------------------------------------------------------- |
| # The LoggerClass entry tells OJB which concrete Logger |
| # implementation is to be used. |
| # |
| # Commons-logging |
| #LoggerClass=org.apache.ojb.broker.util.logging.CommonsLoggerImpl |
| # log4j based logging |
| #LoggerClass=org.apache.ojb.broker.util.logging.Log4jLoggerImpl |
| # OJB's own simple looging support |
| LoggerClass=org.apache.ojb.broker.util.logging.PoorMansLoggerImpl |
| LoggerConfigFile=log4j.properties |
| # |
| # The LogLevel entries tells OJB which LogLevels are active |
| # for the different loggers used within OJB |
| # Loglevels: DEBUG < INFO < WARN < ERROR < FATAL |
| # That is loglevel WARN won't log DEBUG and INFO messages, |
| # but will log WARN, ERROR, and FATAL messages |
| # |
| # Global default log level used for all logging |
| # entities if not specified |
| ROOT.LogLevel=ERROR |
| # |
| # The Default Logger instance used within OJB |
| DEFAULT.LogLevel=WARN |
| # Logger for PersistenceBrokerImpl class |
| org.apache.ojb.broker.core.PersistenceBrokerImpl.LogLevel=WARN |
| # Logger for PersistenceBrokerFactory class PersistenceBrokerFactoryDefaultImpl |
| org.apache.ojb.broker.core.PersistenceBrokerFactoryDefaultImpl.LogLevel=WARN |
| # Logger for RepositoryXmlHandler, useful for debugging parsing of repository.xml! |
| org.apache.ojb.broker.metadata.RepositoryXmlHandler.LogLevel=WARN |
| # Logger for JdbcAccess, useful for debugging JDBC related problems |
| org.apache.ojb.broker.accesslayer.JdbcAccessImpl.LogLevel=WARN |
| # Logger for RsIterator, useful for debugging problems with Object materialization |
| org.apache.ojb.broker.accesslayer.RsIterator.LogLevel=WARN |
| # Logger for StatementsForClass, useful for debugging JDBC Connection related problems |
| org.apache.ojb.broker.accesslayer.StatementsForClassImpl.LogLevel=WARN |
| # Logger for SqlGenerator, useful for debugging generation of SQL |
| org.apache.ojb.broker.accesslayer.sql.SqlGeneratorDefaultImpl.LogLevel=WARN |
| # Logger for RepositoryPersistor |
| org.apache.ojb.broker.metadata.RepositoryPersistor.LogLevel=WARN |
| # Logger for ConnectionFactory base class |
| org.apache.ojb.broker.accesslayer.ConnectionFactoryAbstractImpl.LogLevel=WARN |
| # Logger for ConnectionManager |
| org.apache.ojb.broker.accesslayer.ConnectionManagerImpl.LogLevel=WARN |
| # |
| # Special Logger categories used in test suite and tutorials |
| # |
| # Logger for the ODMG Implementation |
| ODMG.LogLevel=WARN |
| # Logger for the JDO RI Implementation |
| JDO.LogLevel=DEBUG |
| # Logger for the performance tests |
| performance.LogLevel=INFO |
| # Logger for the soda api |
| soda.LogLevel=WARN |
| # Logger for the factory service |
| ConfigurableFactory.LogLevel=WARN |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # OQL / SQL settings |
| #---------------------------------------------------------------------------------------- |
| # The OqlCollectionClass entry defines the collection type returned |
| # from OQL queries. By default this value is set to DListImpl. |
| # This will be good for most situations as DList allows maximum flexibility |
| # in a ODMG environment. See also section 'ODMG settings'. |
| # Using DLists for large resultsets may be bad for application performance. |
| # For these scenarios you can use ArrayLists or Vectors. |
| # Important note: the collections class to be used MUST implement the |
| # interface org.apache.ojb.broker.ManageableCollection. |
| # |
| OqlCollectionClass=org.apache.ojb.odmg.collections.DListImpl_2 |
| # OqlCollectionClass=org.apache.ojb.broker.util.collections.ManageableArrayList |
| # OqlCollectionClass=org.apache.ojb.broker.util.ManageableVector |
| # |
| # The SqlInLimit entry limits the number of values in IN-sql statement, |
| # -1 for no limits. This hint is used in Criteria. |
| SqlInLimit=200 |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # ODMG settings |
| #---------------------------------------------------------------------------------------- |
| # Used ODMG collection implementation classes |
| # (e.g. when do a Implementation#newDlist() call) |
| # |
| # org.odmg.DList implementation class |
| DListClass=org.apache.ojb.odmg.collections.DListImpl_2 |
| #DListClass=org.apache.ojb.odmg.collections.DListImpl |
| # |
| # org.odmg.DArray implementation class |
| DArrayClass=org.apache.ojb.odmg.collections.DListImpl_2 |
| #DArrayClass=org.apache.ojb.odmg.collections.DListImpl |
| # |
| # org.odmg.DMap implementation class |
| DMapClass=org.apache.ojb.odmg.collections.DMapImpl |
| # |
| # org.odmg.DBag implementation class |
| DBagClass=org.apache.ojb.odmg.collections.DBagImpl |
| # |
| # org.odmg.DSet implementation class |
| DSetClass=org.apache.ojb.odmg.collections.DSetImpl |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # Meta data / mapping settings |
| #---------------------------------------------------------------------------------------- |
| # The PersistentFieldClass property defines the implementation class |
| # for PersistentField attributes used in the OJB MetaData layer. |
| # By default the best performing attribute/refection based implementation |
| # is selected (PersistentFieldDirectAccessImpl). |
| # |
| # - PersistentFieldDirectAccessImpl |
| # is a high-speed version of the access strategies. |
| # It does not cooperate with an AccessController, |
| # but accesses the fields directly. Persistent |
| # attributes don't need getters and setters |
| # and don't have to be declared public or protected |
| # - PersistentFieldPrivilegedImpl |
| # Same as above, but does cooperate with AccessController and do not |
| # suppress the java language access check. |
| # - PersistentFieldIntrospectorImpl |
| # uses JavaBeans compliant calls only to access persistent attributes. |
| # No Reflection is needed. But for each attribute xxx there must be |
| # public getXxx() and setXxx() methods. |
| # - PersistentFieldDynaBeanAccessImpl |
| # implementation used to access a property from a |
| # org.apache.commons.beanutils.DynaBean. |
| # |
| PersistentFieldClass=org.apache.ojb.broker.metadata.fieldaccess.PersistentFieldDirectAccessImpl |
| #PersistentFieldClass=org.apache.ojb.broker.metadata.fieldaccess.PersistentFieldPrivilegedImpl |
| #PersistentFieldClass=org.apache.ojb.broker.metadata.fieldaccess.PersistentFieldIntrospectorImpl |
| #PersistentFieldClass=org.apache.ojb.broker.metadata.fieldaccess.PersistentFieldDynaBeanAccessImpl |
| # |
| # |
| #---------------------------------------------------------------------------------------- |
| # Component Intercepting for Profiling and Tracing |
| #---------------------------------------------------------------------------------------- |
| # By enabling an InterceptorClass all OJB components will use |
| # this Interceptor. Interceptors allow advanced tracing and Profiling |
| # of all component method calls. |
| # This is currently an experimental feature useful only for OJB kernel developers. |
| # |
| #InterceptorClass=org.apache.ojb.broker.util.interceptor.TracingInterceptor |
| # |
| #---------------------------------------------------------------------------------------- |
| # Transaction Management and assocation |
| #---------------------------------------------------------------------------------------- |
| # Use the LocalTxManager if you want the transaction to be associated by a thread |
| OJBTxManagerClass=org.apache.ojb.odmg.LocalTxManager |
| # Use the JTATxManager if you want the transaction to be associated via the Transaction |
| # manager that is in your application server. |
| #OJBTxManagerClass=org.apache.ojb.odmg.JTATxManager |
| # |
| # The TransactionManager is acquired in different ways dependent on the application server. |
| # The JTATransactionManagerClass property allows you to specify the class that implements |
| # the proper behaviour for finding the transaction manager. Only use when OJBTxManagerClass |
| # is set to a factory that uses the application server transaction manager |
| # (org.apache.ojb.odmg.JTATxManager) |
| # |
| # JBoss Transaction Manager Factory |
| JTATransactionManagerClass=org.apache.ojb.odmg.transaction.JBossTransactionManagerFactory |
| # Weblogic Transaction Manager Factory |
| #JTATransactionManagerClass=org.apache.ojb.odmg.transaction.WeblogicTransactionManagerFactory |
| # WebSphere transaction manager factory |
| #JTATransactionManagerClass=org.apache.ojb.odmg.transaction.WebSphereTransactionManagerFactory |
| # Orion transaction manager factory |
| #JTATransactionManagerClass=org.apache.ojb.odmg.transaction.OrionTransactionManagerFactory |
| # |
| #---------------------------------------------------------------------------------------- |
| # End of OJB.properties file |
| #---------------------------------------------------------------------------------------- |
