| <!-- |
| Licensed to the Apache Software Foundation (ASF) under one or more |
| contributor license agreements. See the NOTICE file distributed with |
| this work for additional information regarding copyright ownership. |
| The ASF licenses this file to You under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with |
| the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| --> |
| <html> |
| |
| <head> |
| <meta http-equiv="Content-Language" content="en-us"> |
| <link rel="stylesheet" type="text/css" href="../stylesheets/style.css"> |
| <title>Uptodate Task</title> |
| </head> |
| |
| <body> |
| |
| <h2><a name="uptodate">Uptodate</a></h2> |
| <h3>Description</h3> |
| <p>Sets a property if a target file or set of target files is more up-to-date |
| than a source file or set of source files. A single source file is specified |
| using the <code>srcfile</code> attribute. A set of source files is specified |
| using the nested <code><srcfiles></code> |
| elements. These are <a href="../Types/fileset.html">FileSet</a>s, |
| whereas multiple target files are specified using a nested |
| <a href="../Types/mapper.html"><code><mapper></code></a> element.</p> |
| <p>By default, the value of the property is set to <code>true</code> if |
| the timestamp of the source file(s) is not more recent than the timestamp of |
| the corresponding target file(s). You can set the value to something other |
| than the default by specifying the <code>value</code> attribute.</p> |
| <p>If a <code><srcfiles></code> element is used, without also specifying |
| a <code><mapper></code> element, the default behavior is to use a |
| <a href="../Types/mapper.html#merge-mapper">merge mapper</a>, with the |
| <code>to</code> attribute set to the value of the |
| <code>targetfile</code> attribute.</p> |
| <p>Normally, this task is used to set properties that are useful to avoid |
| target execution depending on the relative age of the specified files.</p> |
| <h3>Parameters</h3> |
| <table border="1" cellpadding="2" cellspacing="0"> |
| <tr> |
| <td valign="top"><b>Attribute</b></td> |
| <td valign="top"><b>Description</b></td> |
| <td align="center" valign="top"><b>Required</b></td> |
| </tr> |
| <tr> |
| <td valign="top">property</td> |
| <td valign="top">The name of the property to set.</td> |
| <td valign="top" align="center">Yes</td> |
| </tr> |
| <tr> |
| <td valign="top">value</td> |
| <td valign="top">The value to set the property to.</td> |
| <td valign="top" align="center">No; defaults to <code>true</code>.</td> |
| </tr> |
| <tr> |
| <td valign="top">srcfile</td> |
| <td valign="top">The file to check against the target file(s).</td> |
| <td valign="top" align="center">Yes, unless a nested |
| <code><srcfiles></code> or <code><srcresources></code> |
| element is present.</td> |
| </tr> |
| <tr> |
| <td valign="top">targetfile</td> |
| <td valign="top">The file for which we want to determine the status.</td> |
| <td valign="top" align="center">Yes, unless a nested |
| <code><mapper></code> element is present.</td> |
| </tr> |
| </table> |
| |
| <h3>Parameters specified as nested elements</h3> |
| <h4><a name="srcfiles">srcfiles</a></h4> |
| <p>The nested <code><srcfiles></code> element is a |
| <a href="../Types/fileset.html">fileset</a> and allows you to |
| specify a set of files to check against the target file(s).</p> |
| |
| <p><strong>Note:</strong> You can specify either the <code>srcfile</code> |
| attribute or nested <code><srcfiles></code> elements, but not both. |
| |
| <p>Note that the task will completely ignore any directories that seem |
| to be matched by the srcfiles fileset, it will only consider normal |
| files. If you need logic that applies to directories as well, use a |
| nested srcresource and a dirset (for example).</p> |
| |
| <h4><a name="srcresources">srcresources</a></h4> |
| <p>The nested <code><srcresources></code> element is a <a |
| href="../Types/resources.html#union">union</a> and allows you to |
| specify a collection of resources to check against the target file(s). |
| <em>Since Apache Ant 1.7</em></p> |
| |
| <h4><a name="mapper">mapper</a></h4> |
| <p>The nested <code><mapper></code> element allows you to specify |
| a set of target files to check for being up-to-date with respect to a |
| set of source files.</p> |
| <p> |
| The mapper "to" attribute is relative to the target file, or to |
| the "dir" attribute of the nested srcfiles element. |
| </p> |
| <p> |
| <em>Since Ant 1.6.3</em>, |
| one can use a filenamemapper type in place of the mapper element. |
| </p> |
| <h3>Examples</h3> |
| <pre> <uptodate property="xmlBuild.notRequired" targetfile="${deploy}\xmlClasses.jar" > |
| <srcfiles dir= "${src}/xml" includes="**/*.dtd"/> |
| </uptodate></pre> |
| <p>sets the property <code>xmlBuild.notRequired</code> to <code>true</code> |
| if the <code>${deploy}/xmlClasses.jar</code> file is more up-to-date than |
| any of the DTD files in the <code>${src}/xml</code> directory.</p> |
| <p>This can be written as:</p> |
| <pre> <uptodate property="xmlBuild.notRequired"> |
| <srcfiles dir= "${src}/xml" includes="**/*.dtd"/> |
| <mapper type="merge" to="${deploy}\xmlClasses.jar"/> |
| </uptodate></pre> |
| as well. |
| |
| The <code>xmlBuild.notRequired</code> property can then be used in a |
| <code><target></code> tag's <code>unless</code> attribute to |
| conditionally run that target. For example, running the following target:</p> |
| <pre> |
| <target name="xmlBuild" depends="chkXmlBuild" unless="xmlBuild.notRequired"> |
| ... |
| </target> |
| </pre> |
| will first run the <code>chkXmlBuild</code> target, which contains |
| the <code><uptodate></code> task that determines whether |
| <code>xmlBuild.notRequired</code> gets set. The property named in |
| the <code>unless</code> attribute is then checked for being set/not set. |
| If it did get set (ie., the jar file is up-to-date), |
| then the <code>xmlBuild</code> target won't be run. |
| </p> |
| |
| <p> The following example shows a single source file being checked |
| against a single target file:</p> |
| <pre> <uptodate property="isUpToDate" |
| srcfile="/usr/local/bin/testit" |
| targetfile="${build}/.flagfile"/> |
| </pre> |
| <p>sets the property <code>isUpToDate</code> to <code>true</code> |
| if <code>/usr/local/bin/testit</code> is not newer than |
| <code>${build}/.flagfile</code>.</p> |
| </p> |
| <p> |
| The following shows usage of a relative mapper. |
| </p> |
| <pre> |
| <uptodate property="checkUptodate.uptodate"> |
| <srcfiles dir="src" includes="*"/> |
| <mapper type="merge" to="../dest/output.done"/> |
| </uptodate> |
| <echo message="checkUptodate result: ${checkUptodate.uptodate}"/> |
| </pre> |
| <p> |
| The previous example can be a bit confusing, so it may be better to |
| use absolute paths: |
| </p> |
| <pre> |
| <property name="dest.dir" location="dest"/> |
| <uptodate property="checkUptodate.uptodate"> |
| <srcfiles dir="src" includes="*"/> |
| <mapper type="merge" to="${dest.dir}/output.done"/> |
| </uptodate> |
| </pre> |
| |
| |
| |
| </body> |
| </html> |
| |