<?xml version="1.0" standalone="no"?>
<!-- 
 * The Apache Software License, Version 1.1
 *
 *
 * Copyright (c) 2001 The Apache Software Foundation.  All rights
 * reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. The end-user documentation included with the redistribution,
 *    if any, must include the following acknowledgment:
 *       "This product includes software developed by the
 *        Apache Software Foundation (http://www.apache.org/)."
 *    Alternately, this acknowledgment may appear in the software itself,
 *    if and wherever such third-party acknowledgments normally appear.
 *
 * 4. The names "Xalan" and "Apache Software Foundation" must
 *    not be used to endorse or promote products derived from this
 *    software without prior written permission. For written
 *    permission, please contact apache@apache.org.
 *
 * 5. Products derived from this software may not be called "Apache",
 *    nor may "Apache" appear in their name, without prior written
 *    permission of the Apache Software Foundation.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * ====================================================================
 *
 * This software consists of voluntary contributions made by many
 * individuals on behalf of the Apache Software Foundation and was
 * originally based on software copyright (c) 2001, Sun
 * Microsystems., http://www.sun.com.  For more
 * information on the Apache Software Foundation, please see
 * <http://www.apache.org/>.
 -->
<!DOCTYPE s1 SYSTEM "../../style/dtd/document.dtd">
  <s1 title="XSLTC and Namespaces">

  <ul>
    <li><link anchor="functionality">Functionality</link></li>
    <li><link anchor="overview">Namespace overview</link></li>
    <li><link anchor="NSA">The DOM &amp; namespaces</link></li>    
    <li><link anchor="NSB">Namespaces in the XSL stylesheet</link></li>
    <li><link anchor="NSC">Namespaces in the output document</link></li>
  </ul>
  <anchor name="functionality"/>
  <s2 title="Functionality">

    <p>Namespaces are used when an XML documents has elements have the same
    name, but are from different contexts, and thus have different meanings
    and interpretations. For instance, a <code>&lt;TITLE&gt;</code> element can
    be a HTML title element in one part of the XML document, while it in other
    parts of the document the <code>&lt;TITLE&gt;</code> element is used for
    encapsulating the title of a play or a book. This sort of confusion is
    very common when reading XML source from multiple documents, but can also
    occur within a single document.</p>

    <p>Namespaces have three very important properties: a name, a prefix (an
    alias for its name) and a scope. Namespaces are declared as attributes of
    almost any node in an XML document. The declaration looks like this:</p>

<source>
    &lt;element xmlns:prefix="http://some.site/spec"&gt;....&lt;/element&gt;
</source>

    <p>The <code>"xmlns"</code> tells that this is a namespace declaration. The
    scope of the namespace declaration is the element in which it is defined
    and all the children of that element.The prefix is the local alias we use
    for referencing the namespace, and the URL (it can be anything, really) is
    the name/definition of the namespace. Note that even though the namespace
    definition is normally an URL, it does not have to point to anything. It
    is recommended that it points to a page that describes the elements in the
    namespace, but it does not have to. The prefix can be just about anything
    - or nothing (in which case it is the default namespace). Any prefix,
    including the empty prefix for the default namespace, can be redefined to
    refer to a different namespace at any time in an XML document. This is
    more likely to happen to the default namespace than any other prefix. Here
    is an example of this:</p>

    <anchor name="xml_sample_1"/>
<source>
    &lt;?xml version="1.0"?&gt;
    
    &lt;employees xmlns:postal="http://postal.ie/spec-1.0"
               xmlns:email="http://www.w3c.org/some-spec-3.2"&gt;
        &lt;employee&gt;
            &lt;name&gt;Bob Worker&lt;/name&gt;
            &lt;postal:address&gt;
                &lt;postal:street&gt;Nassau Street&lt;/postal:street&gt;
                &lt;postal:city&gt;Dublin 3&lt;/postal:city&gt;
                &lt;postal:country&gt;Ireland&lt;/postal:country&gt;
            &lt;/postal:address&gt;
            &lt;email:address&gt;bob.worker@hisjob.ie&lt;/email:address&gt;
        &lt;/employee&gt;
    &lt;/employees&gt;
</source>

    <p>This short document has two namespace declarations, one with the prefix
    <code>"postal"</code> and another with the prefix <code>"email"</code>. The
    prefixes are used to distinguish between elements for e-mail addresses and
    regular postal addresses. In addition to these two namespaces there is also
    an initial (unnamed) default namespace being used for the
    <code>&lt;name&gt;</code> and <code>&lt;employee&gt;</code> tags. The scope of the
    default namespace is in this case the whole document, while the scope of
    the other two declared namespaces is the <code>&lt;employees&gt;</code>
    element and its children.</p>

    <p>By changing the default namespace we could have made the document a
    little bit simpler and more readable:</p>

    <anchor name="xml_sample_2"/>
<source>
    &lt;?xml version="1.0"?&gt;
    
    &lt;employees xmlns:email="http://www.w3c.org/some-spec-3.2"&gt;
        &lt;employee&gt;
            &lt;name&gt;Bob Worker&lt;/name&gt;
            &lt;address xmlns="http://postal.ie/spec-1.0"&gt;
                &lt;street&gt;Nassau Street&lt;/street&gt;
                &lt;city&gt;Dublin 3&lt;/city&gt;
                &lt;country&gt;Ireland&lt;/country&gt;
            &lt;/address&gt;
            &lt;email:address&gt;bob.worker@hisjob.ie&lt;/email:address&gt;
        &lt;/employee&gt;
    &lt;/employees&gt;
</source>

    <p>The default namespace is redefined for the <code>&lt;address&gt;</code> node
    and its children, so there is no need to specify the street as
    <code>&lt;postal:street&gt;</code> - just plain <code>&lt;street&gt;</code> is
    sufficient. Note that this also applies to the <code>&lt;address&gt;</code>
    where the namespace is first defined. This is in effect a redefinition of
    the default namespace.</p>
  </s2><anchor name="overview"/>
  <s2 title="Namespace overview">

    <p>Namespaces will have to be handled in three separate parts of the XSLT
    compiler:</p>

    <anchor name="all_namespaces"/>
      <p><img src="all_namespaces.gif" alt="all_namespaces.gif"/></p>
      <p><ref>Figure 1: Namespace handlers in the XSLTC</ref></p>

    <p>The most obvious is the namespaces in the source XML document
    (marked <link anchor="NSA">"NS A"</link> in figure 1). These namespaces will be
    handled by our DOM implementation class. The source XSL stylesheet also
    has its own set of namespaces (<link idref="NSB">"NS B"</link>) - one of which
    is the XSL namespace. These namespaces will be handled at run-time and
    whatever information that is needed to process there should be compiled
    into the translet. There is also a set of namespaces that will be used in
    the resulting document (<link idref="NSC">"NS C"</link>). This is an
    intersection of the first two. The output document should not contain any
    more namespace declarations than necessary.</p>

    </s2><anchor name="NSA"/>
    <s2 title="The DOM &amp; namespaces">
    <ul>
      <li><link anchor="dom-namespace">DOM node types and namespace types</link></li>
      <li><link anchor="assign">Assigning namespace types to DOM nodes</link></li>                
    </ul>
    <anchor name="dom-namespace"/>
    <s3 title="DOM node types and namespace types">

    <p>Refer to the XSLTC <link idref="xsltc_runtime">runtime
    environment design</link> document for a description of node types before
    proceeding. In short, each node in the our DOM implementation is
    represented by a simple integer. By using this integer as an index into an
    array called <code>_type[]</code> we can find the type of the node.</p>

    <p>The type of the node is an integer representing the type of element the
    node is. All elements <code>&lt;bob&gt;</code> will be given the same type,
    all text nodes will be given the same type, and so on. By using the node
    type as an index an array called <code>_namesArray[]</code> we can find the
    name of the element type - in this case "bob". This code fragment shows
    how you can, with our current implementation, find the name of a node:</p>

<source>
    int    node = iterator.getNext();  // get next node
    int    type = _type[node];         // get node type
    String name = _namesArray[type];   // get node name
</source>

    <p>We want to keep the one-type-per-node arrangement, since that lets us
    produce fairly efficient code. One type in the DOM maps to one type in
    the compiled translet. What we could do to represent the namespace for
    each node in the DOM is to add a <code>_namespaceType[]</code> array that holds
    namespace types. Each node type maps to a namespace type, and each
    namespace type maps to a namespace name (and a prefix with a limited
    scope):</p>

    <anchor name="type_mappings"/>
    <p><img src="type_mappings.gif" alt="type_mappings.gif"/></p>
      <p><ref>Figure 2: Mapping between node types/names, namespace types/names</ref></p>

    <p>This code fragment shows how we could get the namespace name for a node:</p>

<source>
    int    node      = iterator.getNext();    // get next node
    int    type      = _type[node];           // get node type
    int    nstype    = _namespace[type];      // get namespace type
    String name      = _namesArray[type];     // get node element name
    String namespace = _nsNamesArray[nstype]; // get node namespace name
</source>

    <p>Note that namespace prefixes are not included here. Namespace prefixes
    are local to the XML document and will be expanded to the full namespace
    names when the nodes are put into the DOM. This, however, is not a trivial
    matter.</p>
    </s3><anchor name="assign"/>
    <s3 title="Assigning namespace types to DOM nodes">

    <p>We cannot simply have a single namespace prefix array similar to the
    <code>_namespaceArray[]</code> array for mapping a namespace type to a single
    prefix. This because prefixes can refer to different namespaces depending
    on where in the document the prefixes are being used. In our last example's
    <link idref="xml_sample_2">XML fragment</link> the empty prefix <code>""</code>
    initially referred to the default namespace (the one with no name - just
    like a Clint Eastwood character). Later on in the document the empty
    prefix is changed to refer to a namespace called 
    <code>"http://postal.ie/spec-1.0"</code>.</p>

    <p>Namespace prefixes are only relevant at the time when the XML document
    is parsed and the DOM is built. Once we have the DOM completed we only need
    a table that maps each node type to a namespace type, and another array of
    all the names of the different namespaces. So what we want to end up with
    is something like this:</p>

     <p><img src="dom_namespace1.gif" alt="dom_namespace1.gif"/></p>
     <p><ref>Figure 3: Each namespace references in the DOM gets one entry</ref></p>

    <p>The namespace table has one entry for each namespace, nomatter how many
    prefixes were used ro reference this namespace in the DOM. To build this
    array we need a temporary data structure used by the DOM builder. This
    structure is a hashtable - where the various prefixes are used for the
    hash values. The contents of each entry in the table will be a small stack
    where previous meanings of each prefix will be stored:</p>

     <p><img src="dom_namespace2.gif" alt="dom_namespace2.gif"/></p>
     <p><ref>Figure 4: Temporary data structure used by the DOM builder</ref></p>

    <p>When the first node is encountered we define a new namespace
    <code>"foo"</code> and assign this namespace type/index 1 (the default 
    namespace <code>""</code> has index 0). At the same time we use the prefix
    <code>"A"</code> for a lookup in the hashtable. This gives us
    an integer stack used for the prefix <code>"A"</code>. We push the namespace
    type 1 on this stack. From now on, until <code>"A"</code> is pop'ed off this
    stack, the prefix <code>"A"</code> will map to namespace type 1, which
    represents the namespace URI <code>"foo"</code>.</p>

    <p>We then encounter the next node with a new namespace definition with
    the same namespace prefix, we create a new namespace <code>"bar"</code> and
    we put that in the namespace table under type 2. Again we use the prefix
    <code>"A"</code> as an entry into the namespace prefix table and we get the
    same integer stack. We now push namespace type 2 on the stack, so that
    namespace prefix <code>"A"</code> maps to namespace URI <code>"bar"</code>. When
    we have traversed this node's children we need to pop the integer off the
    stack, so when we're back at the first node the prefix <code>"A"</code> again
    will point to namespace type 0, which maps to <code>"foo"</code>. To keep
    track of what nodes had what namespace declarations, we use a namespace
    declaration stack:</p>

    <p><img src="dom_namespace3.gif" alt="dom_namespace3.gif"/></p>
     <p><ref>Figure 5: Namespace declaration stack</ref></p>
     
    <p>Every namespace declaration is pushed on the namespace declaration
    stack. This stack holds the node index for where the namespace was
    declared, and a reference to the prefix stack for this declaration.
    The <code>endElement()</code> method of the DOMBuilder class will need to
    remove namespace declaration for the node that is closed. This is done
    by first checking the namespace declaration stack for any namespaces
    declared by this node. If any declarations are found these are un-declared
    by poping the namespace prefixes off the respective prefix stack(s), and
    then poping the entry/entries for this node off the namespace declaration
    stack.</p>

    <p>The <code>endDocument()</code> method will build an array that contains
    all namespaces used in the source XML document - <code>_nsNamesArray[]</code>
    - which holds the URIs of all refered namespaces. This method also builds
    an array that maps all DOM node types to namespace types. This two arrays
    are accessed through two new methods in the DOM interface:</p>

<source>
    public String getNamespaceName(int node);
    public int    getNamespaceType(int node);
</source>

  </s3></s2><anchor name="NSB"/>
  <s2 title="Namespaces in the XSL stylesheet">
  <ul>
    <li><link anchor="store-access">Storing and accessing namespace information</link></li>
    <li><link anchor="mapdom-stylesheet">Mapping DOM namespaces to stylesheet namespaces</link></li>
    <li><link anchor="wildcards">Wildcards and namespaces</link></li>
  </ul>
    <anchor name="store-access"/>
    <s3 title="Storing and accessing namespace information">
    <p>The SymbolTable class has three datastructures that are used to hold
    namespace information:</p>

    <ul>
      <li>
        First there is the <code>_namespaces[]</code> Hashtable that maps the names
        of in-scope namespace to their respective prefixes. Each key in the
        Hashtable object has a stack. A new prefix is pushed on the stack for
        each new declaration of a namespace.
      </li>
      <li>
        Then there is the <code>_prefixes[]</code> Hashtable. This has the reverse
        function of the <code>_namespaces[]</code> Hashtable - it maps from
        prefixes to namespaces.
      </li>
      <li>
        There is also a hashtable that is used for implementing the
        <code>&lt;xsl:namespace-alias&gt;</code> element. The keys in this
        hashtable is taken from the <code>stylesheet-prefix</code> attribute of
        this element, and the resulting prefix (from the <code>result-prefix</code>
        attribute) is used as the value for each key.
      </li>
    </ul>

    <p>The SymbolTable class offers 4 methods for accessing these data
    structures:</p>

<source>
    public void   pushNamespace(String prefix, String uri);
    public void   popNamespace(String prefix);
    public String lookupPrefix(String uri);
    public String lookupNamespace(String prefix);
</source>

    <p>These methods are wrapped by two methods in the Parser class (a Parser
    object alwas has a SymbolTable object):</p>
<source>
    // This method pushes all namespaces declared within a single element
    public void pushNamespaces(ElementEx element);
    // This method pops all namespaces declared within a single element
    public void popNamespaces(ElementEx element);
</source>

    <p>The translet class has, just like the DOM, a <code>namesArray[]</code>
    structure for holding the expanded QNames of all accessed elements. The
    compiled translet fills this array in its constructor. When the translet
    has built the DOM (a DOMImpl object), it passes the DOM to the a DOM
    adapter (a DOMAdapter object) together with the names array. The DOM
    adapter then maps the translet's types to the DOM's types.</p>
   </s3><anchor name="mapdom-stylesheet"/>
  <s3 title="Mapping DOM namespaces and stylesheet namespaces">

    <p>Each entry in the DOM's <code>_namesArray[]</code> is expanded to contain
    the full QName, so that instead of containing <code>prefix:localname</code> it
    will now contain <code>namespace-uri:localname</code>. In this way the expanded
    QName in the translet will match the exanded QName in the DOM. This assures
    matches on full QNames, but does not do much for <code>match="A:*"</code> type
    XPath patterns. This is where our main challenge lies.</p>
    </s3><anchor name="wildcards"/>
    <s3 title="Wildcards and namespaces">

    <p>The original implementation of the XSLTC runtime environment would
    only allow matches on "<code>*</code>" and "<code>@*</code>" patterns. This was
    achieved by mapping all elements that could not be mapped to a translet
    type to 3 (DOM.ELEMENT type), and similarly all unknown attributes to
    type 4 (DOM.ATTRIBUTE type). The main <code>switch()</code> statement in
    <code>applyTemplates()</code> would then have a separate "<code>case()</code>"
    for each of these. (Under each <code>case()</code> you might have to check
    for the node's parents in case you were matching on "<code>path/*</code>"-type
    patterns.) This figure shows how that was done:</p>

    <anchor name="match_namespace1"/>
    <p><img src="match_namespace1.gif" alt="match_namespace1.gif"/></p>
    <p><ref>Figure 6: Previous pattern matching</ref></p>

    <p>The "Node test" box here represents the "<code>switch()</code>" statement.
    The "Node parent test" box represent each "<code>case:</code>" for that 
    <code>switch()</code> statement. There is one <code>case:</code> for each know
    translet node type. For each node type we have to check for any parent
    patterns - for instance, for the pattern "<code>/foo/bar/baz</code>", we will
    get a match with <code>case "baz"</code>, and we have to check that the parent
    node is "<code>bar</code>" and that the grandparent is "<code>foo</code>" before
    we can say that we have a hit. The "Element parent test" is the test that
    is done all DOM nodes that do not directly match any translet types. This
    is the test for "<code>*</code>" or "<code>foo/*</code>". Similarly we have a
    "<code>case:</code>" for match on attributes ("<code>@*</code>").</p>

    <p>What we now want to achieve is to insert a check for patterns on the
    format "<code>ns:*</code>", "<code>foo/ns:*</code>" or "<code>ns:@*</code>", which
    this figure illustrates:</p>

    <anchor name="match_namespace2"/>
      <p><img src="match_namespace2.gif" alt="match_namespace2.gif"/></p>
      <p><ref>Figure 7: Pattern matching with namespace tests</ref></p>


    <p>Each node in the DOM needs a namespace type as well as the QName type.
    With this type we can match wildcard rules to any specific namespace.
    So after any checks have been done on the whole QName of a node (the type),
    we can match on the namespace type of the node. The main dispatch
    <code>switch()</code> in <code>applyTemplates()</code> must be changed from this:</p>

    <source>
        public void applyTemplates(DOM dom, NodeIterator iterator,
                                   TransletOutputHandler handler) {

            // Get next node from iterator
            while ((node = iterator.next()) != END) {
                // Get internal node type
                final int type = DOM.getType(node);
                switch(type) {
                case DOM.ROOT:      // Match on "/" pattern
                    handleRootNode();       
                    break;
                case DOM.TEXT:      // Handle text nodes
                    handleText();
                    break;
                case DOM.ELEMENT:   // Match on "*" pattern
                    handleWildcardElement();
                    break;
                case DOM.ATTRIBUTE: // Handle on "@*" pattern
                    handleWildcardElement();
                    break;
                case nodeType1:     // Handle 1st known element type
                    compiledCodeForType1();
                    break;
                    :
                    :
                    :
                case nodeTypeN:   // Handle nth known element type
                    compiledCodeForTypeN();
                    break;
                default:
                   NodeIterator newIterator = DOM.getChildren(node);
                   applyTemplates(DOM, newIterator, handler);
                   break;
                }
            }
            return;
        }
</source>

    <p>To something like this:</p>

    <source>
        public void applyTemplates(DOM dom, NodeIterator iterator,
                                   TransletOutputHandler handler) {

            // Get next node from iterator
            while ((node = iterator.next()) != END) {

                // First run check on node type
                final int type = DOM.getType(node);
                switch(type) {
                case DOM.ROOT:      // Match on "/" pattern
                    handleRootNode();
                    continue;
                case DOM.TEXT:      // Handle text nodes
                    handleText();
                    continue;
                case DOM.ELEMENT:   // Not handled here!!!
                    break;
                case DOM.ATTRIBUTE: // Not handled here!!!
                    break;
                case nodeType1:     // Handle 1st known element type
                    if (compiledCodeForType1() == match) continue;
                    break;
                    :
                    :
                    :
                case nodeTypeN:     // Handle nth known element type
                    if (compiledCodeForTypeN() == match) continue;
                    break;
                default:
                    break;
                }

                // Then run check on namespace type
                final int namespace = DOM.getNamespace(type);
                switch(namespace) {
                case 0: // Handle nodes matching 1st known namespace
                    if (handleThisNamespace() == match) continue;
                    break;
                case 1: // Handle nodes matching 2nd known namespace
                    if (handleOtherNamespace() == match) continue;
                    break;
                }

                // Finally check on element/attribute wildcard
                if (type == DOM.ELEMENT) {
                    if (handleWildcardElement() == match)
                        continue;
                    else {
                       // The default action for elements
                       NodeIterator newIterator = DOM.getChildren(node);
                       applyTemplates(DOM, newIterator, handler);
                    }
                }
                else if (type == DOM.ATTRIBUTE) {
                    handleWildcardAttribute();
                    continue; 
                }
            }
        }
</source>

    <p>First note that the default action (iterate on children) does not hold for
    attributes, since attribute nodes do not have children. Then note that the way
    the three levels of tests are ordered is consistent with the way patterns
    should be prioritised:</p>

    <ul>

      <li><em>Match on element/attribute types:</em></li>
        <ul>
          <li><code>match="/"</code> - match on the root node</li>
          <li><code>match="B"</code> - match on any B element</li>
          <li><code>match="A/B"</code> - match on B elements with A parent</li>
          <li><code>match="A | B"</code> - match on B or A element</li>
          <li><code>match="foo:B"</code> - match on B element within "foo" namespace</li>
        </ul>
        <li><em>Match on namespace:</em></li>
        <ul>
          <li><code>match="foo:*"</code> - match on any element within "foo" namespace</li>
          <li><code>match="foo:@*"</code> - match on any attribute within "foo" namespace</li>
          <li><code>match="A/foo:*"</code> - match on any element within "foo" namespace with A parent</li>
          <li><code>match="A/foo:@*"</code> - match on any attribute within "foo" namespace with A parent</li>
        </ul>      

      <li><em>Match on wildcard:</em> </li>
        <ul>
          <li><code>match="*"</code> - match on any element</li>
          <li><code>match="@*"</code> - match on any attribute</li>
          <li><code>match="A/*"</code> - match on any element with A parent</li>
          <li><code>match="A/@*"</code> - match on any attribute with A parent</li>
        </ul>
     
    </ul>

     </s3></s2><anchor name="NSC"/>
     <s2 title="Namespaces in the output document">

    <p>These are the categories of namespaces that end up in the output
    document:</p>

    <ul>
      <li>
        Namespaces used in literal elements/attributes in the stylesheet. These
        namespaces should be declared <em>once</em> before use in the output
        document. These elements are copied to the output document independent
        of namespaces in the input XML document. However, the namespaces can
        be declared using the same prefix, such that a namespace used by a
        literal result element can overshadow a namespace from the DOM.
      </li>
      <li>
        Namespaces from elements in the stylesheet that match elements in the
        DOM. No namespaces from the DOM should be copied to the output document
        unless they are actually referenced in the stylesheet. No namespaces
        from the stylesheet should be copied to the output document unless the
        elements in which they are references match elements in the DOM.
      </li>
    </ul>

      <anchor name="output_namespaces1"/>
      <p><img src="output_namespaces1.gif" alt="output_namespaces1.gif"/></p>
      <p><ref>Figure 8: Namespace declaration in the output document</ref></p>    

    <p>Any literal element that ends up in the output document must declare all
    namespaces that were declared in the <code>&lt;xsl:stylesheet&lt;</code>
    element. Exceptions are namespaces that are listed in this element's
    <code>exclude-result-prefixes</code> or <code>extension-element-prefixes</code>
    attributes. These namespaces should only be declared if they are referenced
    in the output.</p>

    <p>Literal elements should only declare namespaces when necessary. A
    literal element should only declare a namespace in the case where it
    references a namespace using prefix that is not in scope for this
    namespace. The output handler will take care of this problem. All namespace
    declarations are put in the output document using the output handler's
    <code>declarenamespace()</code> method. This method will monitor all namespace
    declarations and make sure that no unnecessary declarations are output.
    The datastructures used for this are similar to those used to track
    namespaces in the XSL stylesheet:</p>

    <anchor name="output_namespaces2"/>
    <p><img src="output_namespaces2.gif" alt="output_namespaces2.gif"/></p>
      <p><ref>Figure 9: Handling Namespace declarations in the output document</ref></p>

 </s2>
</s1>