//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
== Configuration

=== Centralized configuration

Apache Unomi uses a centralized configuration file that contains both system properties and configuration properties.
These settings are then fed to the OSGi and other configuration files using placeholder that look something like this:

[source]
----
contextserver.publicAddress=${org.apache.unomi.cluster.public.address:-http://localhost:8181}
contextserver.internalAddress=${org.apache.unomi.cluster.internal.address:-https://localhost:9443}
----

Default values are stored in a file called `$MY_KARAF_HOME/etc/custom.system.properties` but you should never modify
this file directly, as an override mechanism is available. Simply create a file called:

    unomi.custom.system.properties

and put your own property values in their to override the defaults OR you can use environment variables to also override
the values in the `$MY_KARAF_HOME/etc/custom.system.properties`. See the next section for more information about that.

=== Changing the default configuration using environment variables (i.e. Docker configuration)

You might want to use environment variables to change the default system configuration, especially if you intend to run
Apache Unomi inside a Docker container. You can find the list of all the environment variable names in the following file:

https://github.com/apache/unomi/blob/master/package/src/main/resources/etc/custom.system.properties

If you are using Docker Container, simply pass the environment variables on the docker command line or if you are using
Docker Compose you can put the environment variables in the docker-compose.yml file.

If you want to "save" the environment values in a file, you can use the `bin/setenv(.bat)` to setup the environment
variables you want to use.

=== Changing the default configuration using property files

If you want to change the default configuration using property files instead of environment variables, you can perform
any modification you want in the `$MY_KARAF_HOME/etc/unomi.custom.system.properties` file.

By default this file does not exist and is designed to be a file that will contain only your custom modifications to the
default configuration.

For example, if you want to change the HTTP ports that the server is listening on, you will need to create the
following lines in the $MY_KARAF_HOME/etc/unomi.custom.system.properties (and create it if you haven't yet) file:

[source]
----
org.osgi.service.http.port.secure=9443
org.osgi.service.http.port=8181
----

If you change these ports, also make sure you adjust the following settings in the same file :

[source]
----
org.apache.unomi.cluster.public.address=http://localhost:8181
org.apache.unomi.cluster.internal.address=https://localhost:9443
----

If you need to specify an ElasticSearch cluster name, or a host and port that are different than the default,
it is recommended to do this BEFORE you start the server for the first time, or you will loose all the data
you have stored previously.

You can use the following properties for the ElasticSearch configuration
[source]
----
org.apache.unomi.elasticsearch.cluster.name=contextElasticSearch
# The elasticsearch.adresses may be a comma seperated list of host names and ports such as
# hostA:9200,hostB:9200
# Note: the port number must be repeated for each host.
org.apache.unomi.elasticsearch.addresses=localhost:9200
----

=== Secured events configuration

Apache Unomi secures some events by default. It comes out of the box with a default configuration that you can adjust
by using the centralized configuration file override in `$MY_KARAF_HOME/etc/unomi.custom.system.properties`


You can find the default configuration in the following file:

    $MY_KARAF_HOME/etc/custom.system.properties

The properties start with the prefix : `org.apache.unomi.thirdparty.*` and here are the default values :

    org.apache.unomi.thirdparty.provider1.key=${env:UNOMI_THIRDPARTY_PROVIDER1_KEY:-670c26d1cc413346c3b2fd9ce65dab41}
    org.apache.unomi.thirdparty.provider1.ipAddresses=${env:UNOMI_THIRDPARTY_PROVIDER1_IPADDRESSES:-127.0.0.1,::1}
    org.apache.unomi.thirdparty.provider1.allowedEvents=${env:UNOMI_THIRDPARTY_PROVIDER1_ALLOWEDEVENTS:-login,updateProperties}

The events set in allowedEvents will be secured and will only be accepted if the call comes from the specified IP
address, and if the secret-key is passed in the X-Unomi-Peer HTTP request header. The "env:" part means that it will
attempt to read an environment variable by that name, and if it's not found it will default to the value after the ":-"
marker.

It is now also possible to use IP address ranges instead of having to list all valid IP addresses for event sources. This
is very useful when working in cluster deployments where servers may be added or removed dynamically. In order to support
this Apache Unomi uses a library called https://seancfoley.github.io/IPAddress/#_Toc525135541[IPAddress] that supports
IP ranges and subnets. Here is an example of how to setup a range:

    org.apache.unomi.thirdparty.provider1.ipAddresses=${env:UNOMI_THIRDPARTY_PROVIDER1_IPADDRESSES:-192.168.1.1-100,::1}

The above configuration will allow a range of IP addresses between 192.168.1.1 and 192.168.1.100 as well as the IPv6
loopback.

Here's another example using the subnet format:

    org.apache.unomi.thirdparty.provider1.ipAddresses=${env:UNOMI_THIRDPARTY_PROVIDER1_IPADDRESSES:-1.2.0.0/16,::1}

The above configuration will allow all addresses starting with 1.2 as well as the IPv6 loopback address.

Wildcards may also be used:

    org.apache.unomi.thirdparty.provider1.ipAddresses=${env:UNOMI_THIRDPARTY_PROVIDER1_IPADDRESSES:-1.2.*.*,::1}

The above configuration is exactly the same as the previous one.

More advanced ranges and subnets can be used as well, please refer to the https://seancfoley.github.io/IPAddress[IPAddress] library documentation for details on
how to format them.

If you want to add another provider you will need to add them manually in the following file (and make sure you maintain
the changes when upgrading) :

    $MY_KARAF_HOME/etc/org.apache.unomi.thirdparty.cfg

Usually, login events, which operate on profiles and do merge on protected properties, must be secured. For each
trusted third party server, you need to add these 3 lines :

[source]
----
thirdparty.provider1.key=secret-key
thirdparty.provider1.ipAddresses=127.0.0.1,::1
thirdparty.provider1.allowedEvents=login,updateProperties
----


=== Installing the MaxMind GeoIPLite2 IP lookup database

Apache Unomi requires an IP database in order to resolve IP addresses to user location.
The GeoLite2 database can be downloaded from MaxMind here :
http://dev.maxmind.com/geoip/geoip2/geolite2/[http://dev.maxmind.com/geoip/geoip2/geolite2/]

Simply download the GeoLite2-City.mmdb file into the "etc" directory.

=== Installing Geonames database

Apache Unomi includes a geocoding service based on the geonames database ( http://www.geonames.org/[http://www.geonames.org/] ). It can be
used to create conditions on countries or cities.

In order to use it, you need to install the Geonames database into . Get the "allCountries.zip" database from here :
http://download.geonames.org/export/dump/[http://download.geonames.org/export/dump/]

Download it and put it in the "etc" directory, without unzipping it.
Edit `$MY_KARAF_HOME/etc/unomi.custom.system.properties` and set `org.apache.unomi.geonames.forceImport` to true,
import should start right away.
Otherwise, import should start at the next startup. Import runs in background, but can take about 15 minutes.
At the end, you should have about 4 million entries in the geonames index.

=== REST API Security

The Apache Unomi Context Server REST API is protected using JAAS authentication and using Basic or Digest HTTP auth.
By default, the login/password for the REST API full administrative access is "karaf/karaf".

The generated package is also configured with a default SSL certificate. You can change it by following these steps :

Replace the existing keystore in $MY_KARAF_HOME/etc/keystore by your own certificate :

http://wiki.eclipse.org/Jetty/Howto/Configure_SSL[http://wiki.eclipse.org/Jetty/Howto/Configure_SSL]

Update the keystore and certificate password in $MY_KARAF_HOME/etc/unomi.custom.system.properties file :

[source]
----
org.ops4j.pax.web.ssl.keystore=${env:UNOMI_SSL_KEYSTORE:-${karaf.etc}/keystore}
org.ops4j.pax.web.ssl.password=${env:UNOMI_SSL_PASSWORD:-changeme}
org.ops4j.pax.web.ssl.keypassword=${env:UNOMI_SSL_KEYPASSWORD:-changeme}
----

You should now have SSL setup on Karaf with your certificate, and you can test it by trying to access it on port 9443.

Changing the default Karaf password can be done by modifying the `org.apache.unomi.security.root.password` in the
`$MY_KARAF_HOME/etc/unomi.custom.system.properties` file

=== Scripting security

By default, scripting (using in conditions, segments and rules) is controlled by a custom classloader that is quite
restrictive and using a white-list/black list system. It is controlled through the following property in the
`unomi.custom.system.properties` file:

[source]
----
org.apache.unomi.scripting.allow=${env:UNOMI_ALLOW_SCRIPTING_CLASSES:-org.apache.unomi.api.Event,org.apache.unomi.api.Profile,org.apache.unomi.api.Session,org.apache.unomi.api.Item,org.apache.unomi.api.CustomItem,ognl.*,java.lang.Object,java.util.Map,java.lang.Integer,org.mvel2.*}
org.apache.unomi.scripting.forbid=${env:UNOMI_FORBID_SCRIPTING_CLASSES:-}
----

If you encounter any errors while trying to access a class in a condition or an action it might be due to this
restrictive configuration.

If you need, for example when adding a custom item type, to adjust these, please be careful as scripts may be called
directly from the context.json personalization conditions and therefore should be kept minimal.

=== Automatic profile merging

Apache Unomi is capable of merging profiles based on a common property value. In order to use this, you must
add the MergeProfileOnPropertyAction to a rule (such as a login rule for example), and configure it with the name
 of the property that will be used to identify the profiles to be merged. An example could be the "email" property,
 meaning that if two (or more) profiles are found to have the same value for the "email" property they will be merged
 by this action.

Upon merge, the old profiles are marked with a "mergedWith" property that will be used on next profile access to delete
the original profile and replace it with the merged profile (aka "master" profile). Once this is done, all cookie tracking
will use the merged profile.

To test, simply configure the action in the "login" or "facebookLogin" rules and set it up on the "email" property.
Upon sending one of the events, all matching profiles will be merged.

=== Securing a production environment

Before going live with a project, you should _absolutely_ read the following section that will help you setup a proper
secure environment for running your context server. 

Step 1: Install and configure a firewall 

You should setup a firewall around your cluster of context servers and/or Elasticsearch nodes. If you have an
application-level firewall you should only allow the following connections open to the whole world : 

* http://localhost:8181/context.js[http://localhost:8181/context.js]
* http://localhost:8181/eventcollector[http://localhost:8181/eventcollector]

All other ports should not be accessible to the world.

For your Apache Unomi client applications (such as the Jahia CMS), you will need to make the following ports
accessible : 

[source]
----
8181 (Context Server HTTP port) 
9443 (Context Server HTTPS port)
----

The Apache Unomi actually requires HTTP Basic Auth for access to the Context Server administration REST API, so it is
highly recommended that you design your client applications to use the HTTPS port for accessing the REST API.

The user accounts to access the REST API are actually routed through Karaf's JAAS support, which you may find the
documentation for here : 

* http://karaf.apache.org/manual/latest/users-guide/security.html[http://karaf.apache.org/manual/latest/users-guide/security.html]

The default username/password is 

[source]
----
karaf/karaf
----

You should really change this default username/password as soon as possible. Changing the default Karaf password can be
done by modifying the `org.apache.unomi.security.root.password` in the `$MY_KARAF_HOME/etc/unomi.custom.system.properties` file

Or if you want to also change the user name you could modify the following file :

    $MY_KARAF_HOME/etc/users.properties

But you will also need to change the following property in the $MY_KARAF_HOME/etc/unomi.custom.system.properties :

    karaf.local.user = karaf

For your context servers, and for any standalone Elasticsearch nodes you will need to open the following ports for proper
node-to-node communication : 9200 (Elasticsearch REST API), 9300 (Elasticsearch TCP transport)

Of course any ports listed here are the default ports configured in each server, you may adjust them if needed.

Step 2 : Follow industry recommended best practices for securing Elasticsearch

You may find more valuable recommendations here : 

* https://www.elastic.co/blog/found-elasticsearch-security[https://www.elastic.co/blog/found-elasticsearch-security]
* https://www.elastic.co/blog/scripting-security[https://www.elastic.co/blog/scripting-security]

Step 4 : Setup a proxy in front of the context server

As an alternative to an application-level firewall, you could also route all traffic to the context server through
a proxy, and use it to filter any communication.

=== Integrating with an Apache HTTP web server

If you want to setup an Apache HTTP web server in from of Apache Unomi, here is an example configuration using
mod_proxy.

In your Unomi package directory, in $MY_KARAF_HOME/etc/unomi.custom.system.properties setup the public address for
the hostname `unomi.apache.org`:

org.apache.unomi.cluster.public.address=https://unomi.apache.org/
org.apache.unomi.cluster.internal.address=http://192.168.1.1:8181

and you will also need to change the cookie domain in the same file:

org.apache.unomi.profile.cookie.domain=apache.org

Main virtual host config:

[source]
----
<VirtualHost *:80>
        Include /var/www/vhosts/unomi.apache.org/conf/common.conf
</VirtualHost>

<IfModule mod_ssl.c>
    <VirtualHost *:443>
        Include /var/www/vhosts/unomi.apache.org/conf/common.conf

        SSLEngine on

        SSLCertificateFile    /var/www/vhosts/unomi.apache.org/conf/ssl/24d5b9691e96eafa.crt
        SSLCertificateKeyFile /var/www/vhosts/unomi.apache.org/conf/ssl/apache.org.key
        SSLCertificateChainFile /var/www/vhosts/unomi.apache.org/conf/ssl/gd_bundle-g2-g1.crt

        <FilesMatch "\.(cgi|shtml|phtml|php)$">
                SSLOptions +StdEnvVars
        </FilesMatch>
        <Directory /usr/lib/cgi-bin>
                SSLOptions +StdEnvVars
        </Directory>
        BrowserMatch "MSIE [2-6]" \
                nokeepalive ssl-unclean-shutdown \
                downgrade-1.0 force-response-1.0
        BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown

    </VirtualHost>
</IfModule>
----

common.conf:

[source]
----
ServerName unomi.apache.org
ServerAdmin webmaster@apache.org

DocumentRoot /var/www/vhosts/unomi.apache.org/html
CustomLog /var/log/apache2/access-unomi.apache.org.log combined
<Directory />
        Options FollowSymLinks
        AllowOverride None
</Directory>
<Directory /var/www/vhosts/unomi.apache.org/html>
        Options FollowSymLinks MultiViews
        AllowOverride None
        Order allow,deny
        allow from all
</Directory>
<Location /cxs>
    Order deny,allow
    deny from all
    allow from 88.198.26.2
    allow from www.apache.org
</Location>

RewriteEngine On
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
ProxyPreserveHost On
ProxyPass /server-status !
ProxyPass /robots.txt !

RewriteCond %{HTTP_USER_AGENT} Googlebot [OR]
RewriteCond %{HTTP_USER_AGENT} msnbot [OR]
RewriteCond %{HTTP_USER_AGENT} Slurp
RewriteRule ^.* - [F,L]

ProxyPass / http://localhost:8181/ connectiontimeout=20 timeout=300 ttl=120
ProxyPassReverse / http://localhost:8181/
----

=== Changing the default tracking location

When performing localhost requests to Apache Unomi, a default location will be used to insert values into the session
to make the location-based personalization still work. You can modify the default location settings using the
centralized configuration file (`$MY_KARAF_HOME/etc/unomi.custom.system.properties`).

Here are the default values for the location settings :

[source]
----
# The following settings represent the default position that is used for localhost requests
org.apache.unomi.ip.database.location=${env:UNOMI_IP_DB:-${karaf.etc}/GeoLite2-City.mmdb}
org.apache.unomi.ip.default.countryCode=${env:UNOMI_IP_DEFAULT_COUNTRYCODE:-CH}
org.apache.unomi.ip.default.countryName=${env:UNOMI_IP_DEFAULT_COUNTRYNAME:-Switzerland}
org.apache.unomi.ip.default.city=${env:UNOMI_IP_DEFAULT_CITY:-Geneva}
org.apache.unomi.ip.default.subdiv1=${env:UNOMI_IP_DEFAULT_SUBDIV1:-2660645}
org.apache.unomi.ip.default.subdiv2=${env:UNOMI_IP_DEFAULT_SUBDIV2:-6458783}
org.apache.unomi.ip.default.isp=${env:UNOMI_IP_DEFAULT_ISP:-Cablecom}
org.apache.unomi.ip.default.latitude=${env:UNOMI_IP_DEFAULT_LATITUDE:-46.1884341}
org.apache.unomi.ip.default.longitude=${env:UNOMI_IP_DEFAULT_LONGITUDE:-6.1282508}
----

You might want to change these for testing or for demonstration purposes.

=== Apache Karaf SSH Console

The Apache Karaf SSH console is available inside Apache Unomi, but the port has been changed from the default value of
8101 to 8102 to avoid conflicts with other Karaf-based products. So to connect to the SSH console you should use:

[source]
----
ssh -p 8102 karaf@localhost
----

or the user/password you have setup to protect the system if you have changed it. You can find the list of Apache Unomi
shell commands in the "Shell commands" section of the documentation.

=== ElasticSearch authentication and security

With ElasticSearch 7, it's possible to secure the access to your data. (https://www.elastic.co/guide/en/elasticsearch/reference/7.5/secure-cluster.html[https://www.elastic.co/guide/en/elasticsearch/reference/7.5/secure-cluster.html])

Depending on your ElasticSearch license you may need to install Kibana and enable xpack security: https://www.elastic.co/guide/en/elasticsearch/reference/7.5/configuring-security.html[https://www.elastic.co/guide/en/elasticsearch/reference/7.5/configuring-security.html]

==== User authentication !

If your ElasticSearch have been configured to be only accessible by authenticated users (https://www.elastic.co/guide/en/elasticsearch/reference/7.5/setting-up-authentication.html[https://www.elastic.co/guide/en/elasticsearch/reference/7.5/setting-up-authentication.html])

Just edit `etc/org.apache.unomi.persistence.elasticsearch.cfg` to add the following settings:

[source]
----
username=USER
password=PASSWORD
----

==== SSL communication

By default Unomi will communicate with ElasticSearch using `http`
but you can configure your ElasticSearch server(s) to allow encrypted request using `https`.

You can follow this documentation to enable SSL on your ElasticSearch server(s):

* https://www.elastic.co/guide/en/elasticsearch/reference/7.5/ssl-tls.html[Full documentation]
* https://www.elastic.co/guide/en/elasticsearch/reference/7.5/configuring-tls.html#node-certificates[Configure certificates]
* https://www.elastic.co/guide/en/elasticsearch/reference/7.5/configuring-tls.html#tls-http[Encrypt HTTP communications]

If your ElasticSearch is correctly configure to encrypt communications on `https`:

Just edit `etc/org.apache.unomi.persistence.elasticsearch.cfg` to add the following settings:

[source]
----
sslEnable=true
----

By default, certificates will have to be configured on the Apache Unomi server to be able to trust the identity
of the ElasticSearch server(s). But if you need to trust all certificates automatically, you can use this setting:

[source]
----
sslTrustAllCertificates=true
----