| # Licensed to the Apache Software Foundation (ASF) under one |
| # or more contributor license agreements. See the NOTICE file |
| # distributed with this work for additional information |
| # regarding copyright ownership. The ASF licenses this file |
| # to you under the Apache License, Version 2.0 (the |
| # "License"); you may not use this file except in compliance |
| # with the License. You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, |
| # software distributed under the License is distributed on an |
| # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| # KIND, either express or implied. See the License for the |
| # specific language governing permissions and limitations |
| # under the License. |
| |
| # ------------------------------------------------------------------- |
| # $Id$ |
| # |
| # This is the configuration file for Turbine. |
| # |
| # Note that strings containing "," (comma) characters must backslash |
| # escape the comma (i.e. '\,') |
| # |
| # ------------------------------------------------------------------- |
| |
| # ------------------------------------------------------------------- |
| # |
| # L O G 4 J - L O G G I N G |
| # |
| # ------------------------------------------------------------------- |
| |
| log4j.file = /WEB-INF/conf/Log4j.properties |
| |
| # ------------------------------------------------------------------- |
| # |
| # M A I L S E R V E R |
| # |
| # ------------------------------------------------------------------- |
| # Your mail server for outgoing email. |
| # |
| # Default: null |
| # ------------------------------------------------------------------- |
| |
| mail.server= |
| |
| # ------------------------------------------------------------------- |
| # SMTP-From header for your outgoing messages |
| # |
| # All failed delivery messages will be returned to this address. |
| # If unset, these messages will be sent to the address in the |
| # From header (standard behaviour) |
| # |
| # Default: null |
| # ------------------------------------------------------------------- |
| |
| mail.smtp.from= |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E R V E R D A T A |
| # |
| # ------------------------------------------------------------------- |
| # Default ServerData that can be used if asked for before the first |
| # request is made. |
| # |
| # Defaults: |
| # |
| # serverdata.default.serverName= |
| # serverdata.default.serverPort=80 |
| # serverdata.default.serverScheme=http |
| # serverdata.default.scriptName= |
| # serverdata.default.contextPath= |
| # ------------------------------------------------------------------- |
| |
| serverdata.default.serverName= |
| serverdata.default.serverPort=80 |
| serverdata.default.serverScheme=http |
| serverdata.default.scriptName= |
| serverdata.default.contextPath= |
| |
| # ------------------------------------------------------------------- |
| # |
| # M O D U L E C A C H I N G |
| # |
| # ------------------------------------------------------------------- |
| # This determines whether or not to cache the modules in memory. For |
| # development, turn this off. For production, turn this on. |
| # |
| # Default: false |
| # ------------------------------------------------------------------- |
| |
| module.cache=false |
| |
| # If module.cache=true, then how large should we make the hashtables |
| # by default. |
| |
| action.cache.size=20 |
| layout.cache.size=10 |
| navigation.cache.size=10 |
| page.cache.size=5 |
| screen.cache.size=50 |
| scheduledjob.cache.size=10 |
| |
| # ------------------------------------------------------------------- |
| # |
| # M O D U L E P A C K A G E S |
| # |
| # ------------------------------------------------------------------- |
| # This is the "classpath" for Turbine. In order to locate your own |
| # modules, you should add them to this path. For example, if you have |
| # com.company.actions, com.company.screens, com.company.navigations, |
| # then this setting would be "com.company,org.apache.turbine.modules". |
| # This path is searched in order. For example, Turbine comes with a |
| # screen module named "Login". If you wanted to have your own screen |
| # module named "Login", then you would specify the path to your |
| # modules before the others. |
| # |
| # Note: org.apache.turbine.modules will always be added to the search |
| # path. If it is not explictly added here, it will be added to the |
| # end. |
| # |
| # Default: org.apache.turbine.modules |
| # ------------------------------------------------------------------- |
| |
| module.packages=org.apache.turbine.modules |
| |
| # ------------------------------------------------------------------- |
| # |
| # D A T A B A S E S E T T I N G S |
| # |
| # ------------------------------------------------------------------- |
| # Turbine uses the decoupled torque now!! |
| # The database settings are now in Torque.properties |
| # ------------------------------------------------------------------- |
| |
| # ------------------------------------------------------------------- |
| # |
| # F R A M E W O R K S E T T I N G S |
| # |
| # ------------------------------------------------------------------- |
| # These are settings that control the behaviour of the framework, |
| # such as determining whether a template system is in use, what |
| # the default templates and screens are and session handling settings. |
| # ------------------------------------------------------------------- |
| |
| # Used to set the template homepage if you are using a template |
| # layout. This is the template that will be displayed to the user |
| # when no specific template is requested. This is normally executed |
| # as the first template the user sees when they access the system. |
| # |
| # Default: Index.vm |
| |
| template.homepage=Index.vm |
| |
| # This is the default screen to show to people when they first access |
| # the system. This is only used if there is no value for |
| # template.homepage. This is for use when you are not using a |
| # templating system such as Velocity or JSP. |
| # |
| # Default: Login |
| |
| screen.homepage= |
| |
| # This is the template that is shown on an incorrect login attempt. |
| # Setting this property will override any value of screen.login specfied |
| # below. |
| # |
| # Default: Login.vm |
| |
| template.login=Login.vm |
| |
| # This is the page that is shown on an incorrect login attempt. It is |
| # referenced in the LoginUser action. This is only used if there is no value |
| # for template.login. This is for use when you are not using a |
| # templating system such as Velocity or JSP. |
| # |
| # Default: Login |
| |
| screen.login= |
| |
| # This is the template that is used by the respective Template based |
| # ErrorScreen for displaying the error. If you are not using a Template based |
| # ErrorScreen, then this is ignored. |
| # |
| # Default: Error.vm |
| |
| template.error=Error.vm |
| |
| # This is the default error screen. |
| # |
| # Default: VelocityErrorScreen |
| |
| screen.error=VelocityErrorScreen |
| |
| # This is the screen that is displayed when the user's web page is in |
| # an invalid state. |
| # |
| # Default: error.InvalidState |
| |
| screen.invalidstate=error.InvalidState |
| |
| # Set the components of the default Doctype for use in html documents. |
| # |
| # Defaults: There are no defaults - if default.html.doctype.root.element is not |
| # set then no default doctype will be available. |
| |
| default.html.doctype.root.element=HTML |
| default.html.doctype.identifier=-//W3C//DTD HTML 4.01 Transitional//EN |
| default.html.doctype.url=http://www.w3.org/TR/1999/REC-html401-19991224/loose.dtd |
| |
| # This is the default action to log a user in. If you write your own |
| # implementation of the login action, make sure that you change this |
| # to reflect the new name. |
| |
| action.login=LoginUser |
| |
| # This is the default action to log a user out. If you write your own |
| # implementation of the logout action, make sure that you change this |
| # to reflect the new name. |
| |
| action.logout=LogoutUser |
| |
| # This is the default action to validate whether or not a session is |
| # valid. For example, if you want to make sure if a user has already |
| # logged in or not. |
| # |
| # Default: SessionValidator |
| |
| action.sessionvalidator=sessionvalidator.TemplateSessionValidator |
| |
| # This is the timeout in seconds for sessions. If left commented out, the |
| # servlet container's default timeout will be left as is. |
| |
| # session.timeout=1800 |
| |
| # This is the default action that builds up the AccessControlList for |
| # the individual users session. |
| |
| action.accesscontroller=AccessController |
| |
| # |
| # Set this value to true if you want to be able to submit multiple |
| # events to an Action by doing eventSubmit_do<action> and consider |
| # only events that have a non-empty, non-zero value. This is useful |
| # if you submit your form with JavaScript |
| # |
| action.eventsubmit.needsvalue = false |
| |
| # If the web container does not supply an explicit encoding for the |
| # request data, assume that is has this encoding. If you use e.g. |
| # UTF-8 or ISO-8859-<something>, change this parameter to keep your |
| # special characters. Default is ISO-8859-1 |
| input.encoding = ISO-8859-1 |
| |
| # ------------------------------------------------------------------- |
| # |
| # J N D I C O N T E X T S |
| # |
| # ------------------------------------------------------------------- |
| |
| # This indicates whether Turbine should try to create JNDI contexts. |
| # |
| # Default: false |
| # |
| # contexts=true |
| |
| # These are the JNDI context properties. Each context's properties |
| # are defined by the properties beginning with context.name. |
| # |
| # Default: none |
| # |
| # Example: The following will create a JNDI context named "name" in |
| # the data.contexts Hashtable. It will point at the RMI registry on |
| # localhost running on port 1099, and will use |
| # com.sun.jndi.rmi.registry.RegistryContextFactory as the initial |
| # context factory: |
| # |
| # context.name.java.naming.provider.url=rmi://localhost:1099 |
| # context.name.java.naming.factory.initial=com.sun.jndi.rmi.registry.RegistryContextFactory |
| |
| # ------------------------------------------------------------------- |
| # |
| # P E E R S |
| # |
| # ------------------------------------------------------------------- |
| # Supplies Turbine with information about the database schema, which |
| # can simplify any required Peer classes. |
| # |
| # Default: org.apache.turbine.util.db.map.TurbineMapBuilder |
| # ------------------------------------------------------------------- |
| |
| database.maps.builder=org.apache.turbine.util.db.map.TurbineMapBuilder |
| |
| # ------------------------------------------------------------------- |
| # |
| # M E S S A G E S |
| # |
| # ------------------------------------------------------------------- |
| # Note that strings containing "," (comma) characters must backslash |
| # escape the comma (i.e. '\,') |
| |
| # The message that can be displayed before a user logs in. |
| |
| login.message=Thank you for your visit. Please log into the system. |
| |
| # The message that can be displayed when no screen is defined. |
| |
| login.message.noscreen=There has been an error. Your session is valid but the screen variable is not defined. |
| |
| # The message that can be displayed when a user enters an incorrect |
| # password or username. |
| |
| login.error=Sorry your username or password is incorrect! |
| |
| # The message that can be displayed when a user logs out. |
| |
| logout.message=Thank you for using the system. Please come back soon. |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E C U R E S O C K E T S L A Y E R |
| # |
| # ------------------------------------------------------------------- |
| # Whether the web server is able to use SSL. Links in Turbine can |
| # check this property to determine if SSL can be used. |
| # |
| # Default: true |
| # ------------------------------------------------------------------- |
| |
| use.ssl=true |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E R V I C E S |
| # |
| # ------------------------------------------------------------------- |
| # Classes for Turbine Services should be defined here. |
| # Format: services.[name].classname=[implementing class] |
| # |
| # To specify properties of a service use the following syntax: |
| # service.[name].[property]=[value] |
| # |
| # The order that these services is listed is important! The |
| # order that is stated here is the order in which the services |
| # will be initialized. Keep this is mind if you have services |
| # that depend on other services during initialization. |
| # ------------------------------------------------------------------- |
| services.AvalonComponentService.classname=org.apache.turbine.services.avaloncomponent.TurbineAvalonComponentService |
| services.CryptoService.classname=org.apache.turbine.services.crypto.TurbineCryptoService |
| services.FactoryService.classname=org.apache.turbine.services.factory.TurbineFactoryService |
| services.PoolService.classname=org.apache.turbine.services.pool.TurbinePoolService |
| services.RunDataService.classname=org.apache.turbine.services.rundata.TurbineRunDataService |
| services.ServletService.classname=org.apache.turbine.services.servlet.TurbineServletService |
| services.AssemblerBrokerService.classname=org.apache.turbine.services.assemblerbroker.TurbineAssemblerBrokerService |
| services.LocalizationService.classname=org.apache.turbine.services.localization.TurbineLocalizationService |
| services.MimeTypeService.classname=org.apache.turbine.services.mimetype.TurbineMimeTypeService |
| services.GlobalCacheService.classname=org.apache.turbine.services.cache.TurbineGlobalCacheService |
| services.SchedulerService.classname=org.apache.turbine.services.schedule.TurbineSchedulerService |
| services.XmlRpcService.classname=org.apache.turbine.services.xmlrpc.TurbineXmlRpcService |
| services.UniqueIdService.classname=org.apache.turbine.services.uniqueid.TurbineUniqueIdService |
| services.UploadService.classname=org.apache.turbine.services.upload.TurbineUploadService |
| services.SecurityService.classname=org.apache.turbine.services.security.db.DBSecurityService |
| services.PullService.classname=org.apache.turbine.services.pull.TurbinePullService |
| # services.IntakeService.classname=org.apache.turbine.services.intake.TurbineIntakeService |
| services.TemplateService.classname=org.apache.turbine.services.template.TurbineTemplateService |
| services.UIService.classname = org.apache.turbine.services.ui.TurbineUIService |
| services.XSLTService.classname=org.apache.turbine.services.xslt.TurbineXSLTService |
| # services.SessionService.classname=org.apache.turbine.services.session.TurbineSessionService |
| |
| # Turn on the appropriate template service. |
| services.VelocityService.classname=org.apache.turbine.services.velocity.TurbineVelocityService |
| |
| # ------------------------------------------------------------------- |
| # |
| # R U N D A T A S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # Default implementations of base interfaces for request processing. |
| # Additional configurations can be defined by using other keys |
| # in the place of the <default> key. |
| # ------------------------------------------------------------------- |
| |
| services.RunDataService.default.run.data=org.apache.turbine.services.rundata.DefaultTurbineRunData |
| services.RunDataService.default.parameter.parser=org.apache.turbine.util.parser.DefaultParameterParser |
| services.RunDataService.default.cookie.parser=org.apache.turbine.util.parser.DefaultCookieParser |
| |
| # ------------------------------------------------------------------- |
| # |
| # C A C H E S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # Interval at which the cache will be checked. The default is |
| # 5000ms or 5 seconds. |
| |
| services.GlobalCacheService.cache.check.frequency = 5000 |
| |
| # ------------------------------------------------------------------- |
| # |
| # A S S E M B L E R B R O K E R S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # A list of AssemblerFactory classes that will be registered |
| # with TurbineAssemblerBrokerService |
| # ------------------------------------------------------------------- |
| |
| services.AssemblerBrokerService.screen=org.apache.turbine.services.assemblerbroker.util.java.JavaScreenFactory |
| # services.AssemblerBrokerService.screen=org.apache.turbine.services.assemblerbroker.util.python.PythonScreenFactory |
| services.AssemblerBrokerService.action=org.apache.turbine.services.assemblerbroker.util.java.JavaActionFactory |
| services.AssemblerBrokerService.layout=org.apache.turbine.services.assemblerbroker.util.java.JavaLayoutFactory |
| services.AssemblerBrokerService.page=org.apache.turbine.services.assemblerbroker.util.java.JavaPageFactory |
| services.AssemblerBrokerService.navigation=org.apache.turbine.services.assemblerbroker.util.java.JavaNavigationFactory |
| services.AssemblerBrokerService.scheduledjob=org.apache.turbine.services.assemblerbroker.util.java.JavaScheduledJobFactory |
| |
| # ------------------------------------------------------------------- |
| # |
| # T E M P L A T E S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # Roughly, the number of templates in each category. |
| # |
| # Defaults: layout=2, navigation=10, screen=50 |
| |
| services.TemplateService.layout.cache.size=2 |
| services.TemplateService.navigation.cache.size=10 |
| services.TemplateService.screen.cache.size=50 |
| |
| # |
| # These are the mapper classes responsible for the lookup of Page, Screen, Layout and Navigation classes according |
| # to the supplied template Name. They also map template names on the Layout and Screen file names to be used. |
| # |
| # services.TemplateService.mapper.page.class = org.apache.turbine.services.template.mapper.DirectTemplateMapper |
| # services.TemplateService.mapper.screen.class = org.apache.turbine.services.template.mapper.ClassMapper |
| # services.TemplateService.mapper.layout.class = org.apache.turbine.services.template.mapper.ClassMapper |
| # services.TemplateService.mapper.navigation.class = org.apache.turbine.services.template.mapper.ClassMapper |
| # services.TemplateService.mapper.layout.template.class = org.apache.turbine.services.template.mapper.LayoutTemplateMapper |
| # services.TemplateService.mapper.screen.template.class = org.apache.turbine.services.template.mapper.ScreenTemplateMapper |
| |
| # ------------------------------------------------------------------- |
| # |
| # P U L L S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # These are the properties for the Pull Service, the service |
| # that works in conjuction with the Turbine Pull Model API. |
| # ------------------------------------------------------------------- |
| |
| services.PullService.earlyInit= true |
| |
| # This determines whether the non-request tools are refreshed |
| # on each request (request tools aren't ever, because they're |
| # instantiated for the request only anyway). |
| services.PullService.tools.per.request.refresh=true |
| |
| # Path to the resources of the application tools, relative to the |
| # application root |
| # services.PullService.tools.resources.dir=/resources/ |
| |
| # These are tools that are placed in the context by the service |
| # These tools will be made available to all your |
| # templates. You list the tools in the following way: |
| # |
| # tool.<scope>.<id> = <classname> |
| # |
| # <scope> is the tool scope: global, request, session |
| # or persistent (see below for more details) |
| # <id> is the name of the tool in the context |
| # |
| # You can configure the tools in this way: |
| # tool.<id>.<parameter> = <value> |
| # |
| # So if you find "global", "request", "session" or "persistent" as second |
| # part, it is a configuration to put a tool into the toolbox, else it is a |
| # tool specific configuration. |
| # |
| # For example: |
| # |
| # tool.global.ui = org.apache.turbine.util.pull.tools.UITool |
| # tool.global.mm = org.apache.turbine.util.pull.MessageManager |
| # tool.request.link = org.apache.turbine.services.pull.tools.TemplateLink |
| # tool.request.page = org.apache.turbine.util.template.HtmlPageAttributes |
| # |
| # Then: |
| # |
| # tool.ui.skin = default |
| # |
| # configures the value of "skin" for the "ui" tool. |
| # |
| # Tools are accessible in all templates by the <id> given |
| # to the tool. So for the above listings the UITool would |
| # be available as $ui, the MessageManager as $mm, the TemplateLink |
| # as $link and the HtmlPageAttributes as $page. |
| # |
| # You should avoid using tool names called "global", "request", |
| # "session" or "persistent" because of clashes with the possible Scopes. |
| # |
| # Scopes: |
| # |
| # global: tool is instantiated once and that instance is available |
| # to all templates for all requests. Tool must be threadsafe. |
| # |
| # request: tool is instantiated once for each request (although the |
| # PoolService is used to recycle instances). Tool need not |
| # be threadsafe. |
| # |
| # session: tool is instantiated once for each user session, and is |
| # stored in the user's temporary hashtable. Tool should be |
| # threadsafe. |
| # |
| # authorized: tool is instantiated once for each user session once the |
| # user logs in. After this, it is a normal session tool. |
| # |
| # persistent: tool is instantiated once for each user session once |
| # the user logs in and is is stored in the user's permanent |
| # hashtable. |
| # This means for a logged in user the tool will be persisted |
| # in the user's objectdata. Tool should be Serializable. These |
| # tools do not need to be threadsafe. |
| # <b>persistent scope tools are deprecated in 2.3</b> |
| # |
| # Defaults: none |
| |
| tool.request.link=org.apache.turbine.services.pull.tools.TemplateLink |
| tool.request.page=org.apache.turbine.util.template.HtmlPageAttributes |
| tool.request.content=org.apache.turbine.services.pull.tools.ContentTool |
| tool.request.l10n=org.apache.turbine.services.localization.LocalizationTool |
| |
| # This pull tool is to allow for easy formatting of Date object into Strings |
| tool.request.dateFormatter=org.apache.turbine.services.pull.util.DateFormatter |
| |
| # Use this tool if you need a place to store data that will persist between |
| # requests. Any data stored using this tool will be stored in the session. |
| tool.session.sessionData=org.apache.turbine.services.pull.util.SessionData |
| |
| # These are intake tools. |
| # tool.request.om=org.apache.turbine.om.OMTool |
| # tool.request.intake=org.apache.turbine.services.intake.IntakeTool |
| |
| # This is a tool that allows access to the scheduler service. |
| # tool.request.scheduler=org.apache.turbine.services.SchedulerTool |
| |
| # The UITool will allow you to skin your Turbine application using simple |
| # properties files that are located in the WEBAPP/resources/ directory |
| # hierarchy. |
| |
| tool.global.ui=org.apache.turbine.services.pull.tools.UITool |
| |
| # Path to the UI resources, relative to the resources directory defined above |
| # tool.ui.dir.skin=/ui/skins |
| |
| # Path to the images of a skin, relative to the skin directory defined above |
| # tool.ui.dir.image=/images |
| |
| # Default CSS file for a skin |
| # tool.ui.css=skin.css |
| |
| # Default skin name |
| # tool.ui.skin=default |
| |
| # |
| # The ui tool normally returns absolute URIs. |
| # Setting this property to true allows you to change the behaviour if you |
| # want only relative URIs (e.g. if you run behind a reverse proxy or a load |
| # balancer). |
| # tool.ui.want.relative=false |
| |
| # |
| # The content tool can put its URIs through the Servlet container, |
| # which might attach things like the jsessionid even to URIs that |
| # are not served by the container. |
| # |
| # The default behaviour was not to put these through the container. |
| # |
| # Set this to true if you need things like jsessionid attached to all |
| # links generated from the $content pull tool. |
| # |
| tool.content.want.encoding = false |
| |
| # |
| # Both the link and the content tool normally return absolute URIs |
| # You can change this by exchanging the tool classes but this is not |
| # really recommended. Setting these properties to true allow you |
| # to change the behaviour if you want only relative URIs (e.g. if you |
| # run behind a reverse proxy or a load balancer). |
| # |
| tool.content.want.relative = false |
| tool.link.want.relative = false |
| |
| # ------------------------------------------------------------------- |
| # |
| # V E L O C I T Y S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| services.VelocityService.earlyInit= true |
| |
| # The location of Velocity configuration file, relative to webapp root |
| # These properties will override the default properties set by Velocity. |
| # You should specify the path to the templates directories as well as |
| # the path to the log file and they should also be relative to webapp root |
| |
| services.VelocityService.template.extension=vm |
| services.VelocityService.default.page = VelocityPage |
| services.VelocityService.default.screen=VelocityScreen |
| services.VelocityService.default.layout = VelocityOnlyLayout |
| services.VelocityService.default.navigation=VelocityNavigation |
| services.VelocityService.default.error.screen = VelocityErrorScreen |
| services.VelocityService.default.layout.template = Default.vm |
| |
| # |
| # Set this to true to catch Velocity Errors and display them in the log file |
| services.VelocityService.catch.errors = true |
| |
| services.VelocityService.runtime.log=/logs/velocity.log |
| # services.VelocityService.input.encoding=UTF-8 |
| services.VelocityService.velocimacro.library = GlobalMacros.vm |
| services.VelocityService.velocimacro.library = macros/TurbineMacros.vm |
| |
| # Set the following line to true to cause velocity to automatically reload |
| # library macro files if they change. This is useful for debugging. |
| services.VelocityService.velocimacro.library.autoreload = false |
| |
| services.VelocityService.resource.loader = file |
| services.VelocityService.file.resource.loader.description = Velocity File Resource Loader |
| services.VelocityService.file.resource.loader.class = org.apache.velocity.runtime.resource.loader.FileResourceLoader |
| services.VelocityService.file.resource.loader.path = /templates/app |
| services.VelocityService.file.resource.loader.cache = false |
| services.VelocityService.file.resource.loader.modificationCheckInterval = 2 |
| |
| # |
| # Do not remove the class path loader lightly, it is used to load the TurbineMacros from VelocityOnlyLayout |
| # |
| services.VelocityService.resource.loader = classpath |
| services.VelocityService.classpath.resource.loader.description = Velocity Classpath Resource Loader |
| services.VelocityService.classpath.resource.loader.class = org.apache.velocity.runtime.resource.loader.ClasspathResourceLoader |
| |
| # ------------------------------------------------------------------- |
| # |
| # J S P S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| services.JspService.template.extension=jsp |
| services.JspService.default.page = JspPage |
| services.JspService.default.screen=BaseJspScreen |
| services.JspService.default.layout = JspLayout |
| services.JspService.default.navigation=BaseJspNavigation |
| services.JspService.default.error.screen = JspErrorScreen |
| services.JspService.default.layout.template = Default.jsp |
| |
| services.JspService.templates = /templates/app |
| services.JspService.buffer.size = 8192 |
| |
| # ------------------------------------------------------------------- |
| # |
| # U P L O A D S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # Whether the files should be automatically picked up by |
| # ParameterParser. |
| |
| services.UploadService.automatic=true |
| |
| # |
| # The directory where files will be temporarily stored. |
| # |
| services.UploadService.repository=. |
| |
| # |
| # The maximum size of a request that will be processed. |
| # |
| services.UploadService.size.max=1048576 |
| |
| # |
| # The maximum size of a request that will have it's elements cached in |
| # memory by TurbineUploadService class. |
| # |
| services.UploadService.size.threshold=10240 |
| |
| # ------------------------------------------------------------------- |
| # |
| # L O C A L I Z A T I O N S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # Default ResourceBundle and language/country codes used by the |
| # TurbineLocalizationService. |
| # |
| locale.default.bundle=MyBundle |
| locale.default.language=en |
| locale.default.country=US |
| |
| # |
| # This will set the charset= portion of the ContentType: header. |
| # Leave commented out unless you want to return stuff as a different |
| # charset. |
| # |
| # locale.default.charset= |
| |
| # ------------------------------------------------------------------- |
| # |
| # M I M E T Y P E S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # This property specifies a file containing mappings between MIME |
| # content types and the corresponding file name extensions. The |
| # service itself contains a hardcoded set of most common mappings. |
| # The file must use the same syntax as the mime.types file of |
| # the Apache Server, i.e. |
| # <mimetype> <ext1> <ext2>... |
| # |
| # services.MimeTypeService.mime.types=/WEB-INF/conf/mime.types |
| |
| # This property specifies a file containing mappings between locales |
| # and the corresponding character encodings. The service itself |
| # contains a hardcoded set of most common mappings. |
| # The file should use the Java property file syntax, i.e. |
| # <lang_country_variant>=<charset> |
| # |
| # services.MimeTypeService.charsets=/WEB-INF/conf/charset.properties |
| |
| # ------------------------------------------------------------------- |
| # |
| # S C H E D U L E R S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # |
| # Set enabled to true to start the scheduler. The scheduler can be |
| # stopped and started after Turbine has been intialized. See the |
| # javadocs for org.apache.turbine.services.schedule.TurbineScheduler |
| # for the methods calls. |
| # |
| # Default = false |
| # |
| |
| services.SchedulerService.enabled=false |
| |
| # Determines if the scheduler service should be initialized early. This |
| # Should always be set to true!!!! |
| |
| services.SchedulerService.earlyInit=true |
| |
| # ------------------------------------------------------------------- |
| # |
| # C R Y P T O S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # |
| # Standard Unix crypt(3) password encryption. |
| # |
| services.CryptoService.algorithm.unix = org.apache.turbine.services.crypto.provider.UnixCrypt |
| # |
| # This providers allows access to the Java Message Digest encryption algorithms |
| # |
| services.CryptoService.algorithm.java = org.apache.turbine.services.crypto.provider.JavaCrypt |
| # |
| # This is a simple, cleartext "encryption" provider. |
| # |
| services.CryptoService.algorithm.cleartext = org.apache.turbine.services.crypto.provider.ClearCrypt |
| # |
| # Use this provider if you upgrade from Turbine 2.1 to current. It provides bug-to-bug |
| # compatibility for passwords created with the old Security Service. See the javadocs for |
| # OldJavaCrypt |
| # |
| services.CryptoService.algorithm.oldjava = org.apache.turbine.services.crypto.provider.OldJavaCrypt |
| # |
| # This is the default crypto provider. It implements the normal Java MessageDigest ciphers |
| # You need not to have this, it is the default if no algorithms are given. The default |
| # provider gives you all the Java MessageDigest Ciphers |
| # |
| services.CryptoService.algorithm.default = org.apache.turbine.services.crypto.provider.JavaCrypt |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E C U R I T Y S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # |
| # This is the class that implements the UserManager interface to |
| # manage User objects. Default is the UserManager from the |
| # DBSecurityService. |
| # Override this setting if you want your User information stored |
| # on a different medium (LDAP directory is a good example). |
| # |
| # Adjust this setting if you change the Setting of the SecurityService class (see above). |
| |
| # Default: org.apache.turbine.services.security.db.DBUserManager |
| services.SecurityService.user.manager = org.apache.turbine.services.security.db.DBUserManager |
| |
| # |
| # These are the default classes used by the Security Service to |
| # provide User, Group, Role and Permission objects. |
| # You want to override this setting only if you want your |
| # implementation to provide application specific addtional |
| # functionality. |
| # |
| # For LDAP use: |
| # services.SecurityService.user.class=org.apache.turbine.services.security.ldap.LDAPUser |
| # LDAP does not yet provide custom Group, User and Role objects so you |
| # must use it with the default TurbineGroup, TurbineRole and |
| # TurbinePermission objects. |
| # |
| # Class for User. Default: org.apache.turbine.om.security.TurbineUser |
| services.SecurityService.user.class=org.apache.turbine.om.security.TurbineUser |
| # Class for Group. Default: org.apache.turbine.om.security.TurbineGroup |
| services.SecurityService.group.class=org.apache.turbine.om.security.TurbineGroup |
| # Class for Role. Default: org.apache.turbine.om.security.TurbineRole |
| services.SecurityService.role.class=org.apache.turbine.om.security.TurbineRole |
| # Class for Permission. Default: org.apache.turbine.om.security.TurbinePermission |
| services.SecurityService.permission.class=org.apache.turbine.om.security.TurbinePermission |
| |
| # |
| # This is the class that implements the ACL interface. |
| # You want to override this setting only if you want your ACL |
| # implementation to provide application specific addtional |
| # functionality. |
| # |
| |
| # Default: org.apache.turbine.util.security.TurbineAccessControlList |
| services.SecurityService.acl.class = org.apache.turbine.util.security.TurbineAccessControlList |
| |
| # |
| # This setting is DBSecurityService specific - this class is consulted for the names |
| # of the columns in the users' tables for the purpose of creating join queries. |
| # If you use your own User implementation in conjunction with DBSecurityService, |
| # it's peer class must implement org.apache.turbine.om.security.peer.UserPeer interface, |
| # and you need to specify the name of the peer class here. |
| # |
| # Default: org.apache.turbine.om.security.peer.TurbineUserPeer |
| # |
| services.SecurityService.userPeer.class=org.apache.turbine.om.security.peer.TurbineUserPeer |
| |
| # |
| # This is used by the SecurityService to make the password checking |
| # secure. When enabled, passwords are transformed by a one-way |
| # function into a sequence of bytes that is base64 encoded. |
| # It is impossible to guess the plain-text form of the password |
| # from the representation. When user logs in, the entered password |
| # is transformed the same way and then compared with stored value. |
| # |
| # Default: false |
| # |
| |
| services.SecurityService.secure.passwords=false |
| |
| # |
| # This property lets you choose what digest algorithm will be used |
| # for encrypting passwords. Check documentation of your JRE for |
| # available algorithms. |
| # |
| # Default: SHA |
| # |
| |
| services.SecurityService.secure.passwords.algorithm=SHA |
| |
| # Configuration for the LDAP Security Service implementation |
| |
| # services.SecurityService.ldap.security.athentication=simple |
| # services.SecurityService.ldap.port=<LDAP PORT> |
| # services.SecurityService.ldap.host=<LDAP HOST> |
| # services.SecurityService.ldap.admin.username=<ADMIN USERNAME> |
| # services.SecurityService.ldap.admin.password=<ADMIN PASSWORD> |
| # services.SecurityService.ldap.user.basesearch=<SEARCH PATTERN> |
| # services.SecurityService.ldap.user.search.filter=<SEARCH FILTER> |
| # services.SecurityService.ldap.dn.attribute=userPrincipalName |
| # services.SecurityService.ldap.provider=com.sun.jndi.ldap.LdapCtxFactory |
| |
| # |
| # This property specifies the type of security authentication |
| # |
| # Default: simple |
| # |
| |
| # services.SecurityService.ldap.security.authentication=simple |
| |
| # |
| # The host name where the LDAP server is listenting. |
| # |
| # Default: localhost |
| # |
| |
| # services.SecurityService.ldap.host=localhost |
| |
| # |
| # The port number where the LDAP server is listenting. |
| # |
| # Default: 389 |
| # |
| |
| # services.SecurityService.ldap.port=389 |
| |
| # |
| # The user name of the admin user. The admin user should be able to |
| # read from the LDAP repository. |
| # Characteres '/' are replaced by '=' and '%' are replaced by ','. |
| # |
| # Default: none |
| # |
| |
| # services.SecurityService.ldap.admin.username=turbineUserUniqueId/turbine%dc/example%dc/com |
| |
| # |
| # The password of the admin user. |
| # |
| # Default: none |
| # |
| |
| # services.SecurityService.ldap.admin.password=turbine |
| |
| # |
| # The class name of the ldap provider. |
| # |
| # Default: com.sun.jndi.ldap.LdapCtxFactory |
| # |
| |
| # services.SecurityService.ldap.provider=com.sun.jndi.ldap.LdapCtxFactory |
| |
| # |
| # The directory base to search. |
| # '/' are replaced by '=' and '%' are replaced by ','. |
| # |
| # Default: none |
| # |
| |
| # services.SecurityService.ldap.basesearch=dc/example%dc/com |
| |
| # |
| # The unique id. It must be an integer field and it is required only when |
| # the users are in LDAP but the groups, roles and permissions are in the |
| # Database. |
| # |
| # services.SecurityService.ldap.user.userid= |
| |
| # |
| # This property maps the username with an attribute in LDAP. |
| # |
| # Default: turbineUserUniqueId |
| # |
| |
| # services.SecurityService.ldap.user.username=turbineUserUniqueId |
| |
| # |
| # This property maps the firstname with an attribute in LDAP. |
| # |
| # Default: turbineUserFirstName |
| # |
| |
| # services.SecurityService.ldap.user.firstname=turbineUserFirstName |
| |
| # |
| # This property maps the lastname with an attribute in LDAP. |
| # |
| # Default: turbineUserLastName |
| # |
| |
| # services.SecurityService.ldap.user.lastname=turbineUserLastName |
| |
| # |
| # This property maps the email with an attribute in LDAP. |
| # |
| # Default: turbineUserMailAddress |
| # |
| |
| # services.SecurityService.ldap.user.email=turbineUserMailAddress |
| |
| # |
| # This property maps the userPassword with an attribute in LDAP. |
| # |
| # Default: none |
| # |
| |
| # services.SecurityService.ldap.user.password=userPassword |
| |
| |
| # ------------------------------------------------------------------- |
| # |
| # X M L R P C S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # This property specifies which class should be used to parse |
| # xml for XmlRpc functionality. |
| # |
| # Default: org.apache.xerces.parsers.SAXParser |
| |
| services.XmlRpcService.parser=org.apache.xerces.parsers.SAXParser |
| |
| # This property specifies which network interface the server part of |
| # XmlRpc should bind to (if it is active). If not specified, the |
| # server will bind to all addresses configured for your host. |
| # |
| # Default: 127.0.0.1 |
| |
| # services.XmlRpcService.address=127.0.0.1 |
| |
| # This property specifies which TCP port the web server part of |
| # XmlRpc should listen on (if it is active). |
| # |
| # Default: 12345 |
| |
| services.XmlRpcService.port=12345 |
| |
| # If any classes are specified here, the Service will create an |
| # instance of them here and start up a listener on the specified |
| # port. |
| # |
| # Note that the handlers demonstrated are not very useful. You |
| # will have to invent your own services. They do however |
| # illustrate that any class with a default constructor can be |
| # added here |
| # |
| # The handler parameter without further extension determines |
| # the default handler for the service |
| # |
| # Default: no classes are specified by default |
| |
| # services.XmlRpcService.handler.$default=java.util.Hashtable |
| # services.XmlRpcService.handler.stringhandler=java.lang.String |
| |
| # The following properties allow the transfer of data between |
| # separate Turbine applications running on different servers. |
| # This allows B2B type behavior such as sending database |
| # updates in the form of XML or whatever type of data |
| # that needs to be shared between Turbine applications |
| # running on separate servers. |
| |
| services.XmlRpcService.handler.file = org.apache.turbine.services.xmlrpc.util.FileHandler |
| services.XmlRpcService.paranoid = false |
| services.XmlRpcService.acceptClient = 192.168.1.* |
| services.XmlRpcService.denyClient = |
| |
| # Do we want a secure server |
| |
| services.XmlRpcService.secure.server = false |
| |
| # Secure server options |
| |
| services.XmlRpcService.secure.server.option.java.protocol.handler.pkgs = \ |
| com.sun.net.ssl.internal.www.protocol |
| |
| services.XmlRpcService.secure.server.option.security.provider = \ |
| com.sun.net.ssl.internal.ssl.Provider |
| |
| services.XmlRpcService.secure.server.option.security.protocol = TLS |
| |
| # You probably want to keep your key stores and trust stores |
| # clear out of your webapp. |
| |
| services.XmlRpcService.secure.server.option.javax.net.ssl.keyStore = /tmp/keystore |
| services.XmlRpcService.secure.server.option.javax.net.ssl.keyStoreType = jks |
| services.XmlRpcService.secure.server.option.javax.net.ssl.keyStorePassword = password |
| services.XmlRpcService.secure.server.option.javax.net.ssl.trustStore = /tmp/truststore |
| services.XmlRpcService.secure.server.option.javax.net.ssl.trustStoreType = jks |
| services.XmlRpcService.secure.server.option.javax.net.ssl.trustStorePassword = password |
| |
| services.XmlRpcService.secure.server.option.sun.ssl.keymanager.type = SunX509 |
| services.XmlRpcService.secure.server.option.sun.ssl.trust.manager.type = SunX509 |
| |
| # These values should be set to 'all' for debugging purposes. |
| |
| services.XmlRpcService.secure.server.option.javax.net.debug = none |
| services.XmlRpcService.secure.server.option.java.security.debug = none |
| |
| # ------------------------------------------------------------------- |
| # |
| # P O O L S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # Default capacity of pools of the Object pooling service. |
| # |
| # Default: 128 |
| services.PoolService.pool.capacity = 128 |
| |
| # Class specific capacities used instead of the default if specified. |
| # |
| # services.PoolService.pool.capacity.org.apache.turbine.services.rundata.DefaultTurbineRunData=512 |
| |
| # ------------------------------------------------------------------- |
| # |
| # F A C T O R Y S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # A comma separated list of classloaders (very optional) |
| # |
| # Example: org.foo.bar.MyClassLoader, org.ack.joe.YourClassLoader |
| # |
| # services.FactoryService.class.loaders= |
| |
| # Customized factories to be used instead of the default factory. |
| # E.g. to instantiate XML parsers, SSL sockets, etc., which require |
| # specific instantiation not supported by the default factory. |
| # The property name is prefixed with "factory" followed by the |
| # name of the production class. The value is the class name of |
| # the factory implementing the Factory interface. The factory |
| # will be instantiated by using the service itself. |
| # |
| # Examples: |
| # |
| # services.FactoryService.factory.javax.xml.parsers.DocumentBuilder=org.foo.xml.DomBuilderFactory |
| # services.FactoryService.factory.javax.xml.parsers.SAXParser=org.foo.xml.SaxParserFactory |
| # services.FactoryService.factory.java.net.ServerSocket=org.foo.net.SslServerSocketFactory |
| |
| # -------------------------------------------------------------------- |
| # |
| # X S L T S E R V I C E |
| # |
| # -------------------------------------------------------------------- |
| |
| services.XSLTService.path = /path/to/stylesheets |
| services.XSLTService.cache = false |
| |
| # ------------------------------------------------------------------- |
| # |
| # I N T A K E S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| # The location of the xml file specifying valid inputs |
| # |
| # If you need to define multiple definition files, you can should |
| # seperate them with commas. |
| # |
| # Default: WEB-INF/conf/intake.xml |
| # |
| services.IntakeService.xml.path=WEB-INF/conf/intake.xml |
| |
| # This file is used to cache the XML definitions after they are |
| # parsed. It provides for a small performance gain on startup. |
| # |
| # Note: Even if you have multiple XML definition files, you will |
| # only need one serialization file! |
| # |
| # Default: WEB-INF/appData.ser |
| # |
| services.IntakeService.serialize.path=WEB-INF/appData.ser |
| |
| # -------------------------------------------------------------------- |
| # |
| # P A R A M E T E R P A R S E R |
| # |
| # -------------------------------------------------------------------- |
| # |
| # This variable controls the case folding applied to URL variable |
| # names. |
| # |
| # Allowed values: none, lower, upper |
| # Default: lower |
| # |
| |
| url.case.folding=lower |
| |
| # ------------------------------------------------------------------- |
| # |
| # A V A L O N C O M P O N E N T S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| # Components implementing the Avalon lifecycle interfaces can be loaded, |
| # configured and initialized by Turbine |
| # ------------------------------------------------------------------- |
| |
| # |
| # Name and location to the configuration file for the components. |
| # |
| services.AvalonComponentService.componentConfiguration = WEB-INF/conf/componentConfiguration.xml |
| |
| # |
| # Name and location to the configuration file for the component roles. |
| # |
| services.AvalonComponentService.componentRoles = WEB-INF/conf/roleConfiguration.xml |
| |
| # |
| # If you want to run Torque from the Avalon Component Service, you must load it |
| # at startup time |
| services.AvalonComponentService.lookup = org.apache.torque.avalon.Torque |
| |
| |
| # ------------------------------------------------------------------- |
| # |
| # S E S S I O N S E R V I C E |
| # |
| # ------------------------------------------------------------------- |
| |
| services.SessionService.earlyInit=true |
| |
| # ------------------------------------------------------------------- |
| # |
| # A D D I T I O N A L P R O P E R T I E S |
| # |
| # ------------------------------------------------------------------- |
| # The full path name to an additional properties file. Properties in |
| # this file will be included in this property set. Duplicate name |
| # values will be replaced, so be careful. |
| # |
| # Default: none |
| # ------------------------------------------------------------------- |
| |
| |
