.. 
.. 
.. Licensed under the Apache License, Version 2.0 (the "License");
.. you may not use this file except in compliance with the License.
.. You may obtain a copy of the License at
.. 
..     http://www.apache.org/licenses/LICENSE-2.0
.. 
.. Unless required by applicable law or agreed to in writing, software
.. distributed under the License is distributed on an "AS IS" BASIS,
.. WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
.. See the License for the specific language governing permissions and
.. limitations under the License.
.. 

Traffic Ops
***********

Introduction
============
Traffic Ops uses a MySql or Postgres database to store the configuration information, and the `Mojolicious framework <http://mojolicio.us/>`_ to generate the user interface and REST APIs. 

Software Requirements
=====================
To work on Traffic Ops you need a \*nix (MacOS and Linux are most commonly used) environment that has the following installed:

* `Carton 1.0.12 <http://search.cpan.org/~miyagawa/Carton-v1.0.12/lib/Carton.pm>`_

  * cpan JSON
  * cpan JSON::PP

* `Go 1.4 <http://golang.org/doc/install>`_
* Perl 5.10.1
* Git
* MySQL 5.1.52
* `Goose <https://bitbucket.org/liamstask/goose/>`_

Addionally, the installation of the following RPMs (or equivalent) is required:

* All RPMs listed in :ref:`rl-ps`
* mysql-test

Traffic Ops Project Tree Overview
=======================================

**/opt/traffic_ops/app**

* bin/ - Directory for scripts, cronjobs, etc

* conf/

  * /development - Development (local) specific config files.
  * /misc - Miscellaneous config files.
  * /production - Production specific config files.
  * /test - Test (unit test) specific config files.

* db/ - Database related area.

  * /migrations - Database Migration files.

* lib/

  * /API - Mojo Controllers for the /API area of the application.
  * /Common - Common Code between both the API and UI areas.
  * /Extensions      
  * Fixtures/ - Test Case fixture data for the 'to_test' database.
    * /Integration - Integration Tests.
  * /MojoPlugins - Mojolicious Plugins for Common Controller Code.
  * Schema/ - Database Schema area.
    * /Result - DBIx ORM related files.
  * /Test - Common Test. 
  * /UI - Mojo Controllers for the Traffic Ops UI itself.
  * Utils/           
    * /Helper - Common utilities for the Traffic Ops application.

* log/ - Log directory where the development and test files are written by the app.

* public/
             
 * css/ - Stylesheets.
 * images/ - Images.
 * js/ - Javascripts

* script/ - Mojo Bootstrap scripts.
   
* t/ - Unit Tests for the UI.

 * api/ - Unit Tests for the API.

* t_integration/ - High level tests for Integration level testing.

* templates/ - Mojo Embedded Perl (.ep) files for the UI.


Perl Formatting Conventions 
===========================
Perl tidy is for use in code formatting. See the following config file for formatting conventions.

::


  edit a file called $HOME/.perltidyrc

  -l=156
  -et=4
  -t
  -ci=4
  -st
  -se
  -vt=0
  -cti=0
  -pt=1
  -bt=1
  -sbt=1
  -bbt=1
  -nsfs
  -nolq
  -otr
  -aws
  -wls="= + - / * ."
  -wrs=\"= + - / * .\"
  -wbb="% + - * / x != == >= <= =~ < > | & **= += *= &= <<= &&= -= /= |= + >>= ||= .= %= ^= x="


Database Management
===================
..  Add db naming conventions

The admin.pl script is for use in managing the Traffic Ops database tables. Below is an example of its usage. 

``$ db/admin.pl``

Usage:  db/admin.pl [--env (development|test|production)] [arguments]

Example: ``db/admin.pl --env=test reset``

Purpose:  This script is used to manage the database. The environments are defined in the dbconf.yml, as well as the database names.

* To use the ``admin.pl`` script, you may need to add ``traffic_ops/lib`` and ``traffic_ops/local/lib/perl5`` to your `PERL5LIB <http://modperlbook.org/html/3-9-2-2-Using-the-PERL5LIB-environment-variable.html>`_ environment variable.

+-----------+--------------------------------------------------------------------+
| Arguments | Description                                                        |
+===========+====================================================================+
| create    | Execute db 'create' the database for the current environment.      |
+-----------+--------------------------------------------------------------------+
| down      | Roll back a single migration from the current version.             |
+-----------+--------------------------------------------------------------------+
| drop      | Execute db 'drop' on the database for the current environment.     |
+-----------+--------------------------------------------------------------------+
| redo      | Roll back the most recently applied migration, then run it again.  |
+-----------+--------------------------------------------------------------------+
| reset     | Execute db drop, create, load_schema, migrate on the database for  |
|           | the current environment.                                           |
+-----------+--------------------------------------------------------------------+
| seed      | Execute SQL from db/seeds.sql for loading static data.             |
+-----------+--------------------------------------------------------------------+
| setup     | Execute db drop, create, load_schema, migrate, seed on the         |
|           | database for the current environment.                              |
+-----------+--------------------------------------------------------------------+
| status    | Print the status of all migrations.                                |
+-----------+--------------------------------------------------------------------+
| upgrade   | Execute migrate then seed on the database for the current          |
|           | environment.                                                       |
+-----------+--------------------------------------------------------------------+

Installing The Developer Environment
====================================
To install the Traffic Ops Developer environment:

1. Clone the traffic_control repository from `github.com <https://github.com/apache/incubator-trafficcontrol>`_.
2. Install the local dependencies using Carton (cpanfile).

  ::

   $ cd traffic_ops/app
   $ carton

3. Set up a user in MySQL.

  Example: :: 

    master $ mysql
    Welcome to the MySQL monitor.  Commands end with ; or \g.
    Your MySQL connection id is 305
    Server version: 5.6.19 Homebrew

    Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.

    Oracle is a registered trademark of Oracle Corporation and/or its
    affiliates. Other names may be trademarks of their respective
    owners.

    Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

    mysql> create user 'to_user'@'localhost';
    mysql> grant all on to_development.* to 'to_user'@'localhost' identified by 'twelve';
    mysql> grant all on to_test.* to 'to_user'@'localhost' identified by 'twelve';
    mysql> grant all on to_integration.* to 'to_user'@'localhost' identified by 'twelve';


4. Enter ``db/admin.pl --env=<enviroment name> setup`` to set up the traffic_ops database(s). 

   * Unit test database: ``$ db/admin.pl --env=test setup``
   * Development database: ``$ db/admin.pl --env=development setup``
   * Integration database: ``$ db/admin.pl --env=integration setup``

   |

   Running the the admin.pl script in setup mode should look like this: ::

       master $ db/admin.pl --env=development setup
       Using database.conf: conf/development/database.conf
       Using database.conf: conf/development/database.conf
       Using database.conf: conf/development/database.conf
       Using database.conf: conf/development/database.conf
       Using database.conf: conf/development/database.conf
       Using database.conf: conf/development/database.conf
       Executing 'drop database to_development'
       Executing 'create database to_development'
       Creating database tables...
       Warning: Using a password on the command line interface can be insecure.
       Migrating database...
       goose: migrating db environment 'development', current version: 0, target: 20150210100000
       OK    20141222103718_extension.sql
       OK    20150108100000_add_job_deliveryservice.sql
       OK    20150205100000_cg_location.sql
       OK    20150209100000_cran_to_asn.sql
       OK    20150210100000_ds_keyinfo.sql
       Seeding database...
       Warning: Using a password on the command line interface can be insecure.

5. (Optional) To load temporary data into the tables: ``$ perl bin/db/setup_kabletown.pl``

6. Run the postinstall script: ``traffic_ops/install/bin/postinstall``

7. To start Traffic Ops, enter ``$ bin/start.pl``

   The local Traffic Ops instance uses an open source framework called morbo, starting following the start command execution.

   Start up success includes the following:

  ::
   

   [2015-02-24 10:44:34,991] [INFO] Listening at "http://*:3000".
   
   Server available at http://127.0.0.1:3000.


8. Using a browser, navigate to the given address: ``http://127.0.0.1:3000``
9. For the initial log in:
  
  * User name: admin
  * Password: password

10. Change the log in information.

Test Cases
==========
Use prove to execute test cases. Execute after a carton install:

* To run the Unit Tests: ``$ local/bin/prove -qrp  t/``
* To run the Integration Tests: ``$ local/bin/prove -qrp t_integration/``

The KableTown CDN example
-------------------------
The integration tests will load an example CDN with most of the features of Traffic Control being used. This is mostly for testing purposes, but can also be used as an example of how to configure certain features. To load the KableTown CDN example and access it:

1. Run the integration tests 
2. Start morbo against the integration database: ``export MOJO_MODE=integration; ./bin/start.pl``
3. Using a browser, navigate to the given address: ``http://127.0.0.1:3000``
4. For the initial log in:
  
  * User name: admin
  * Password: password


Extensions
==========
Traffic Ops Extensions are a way to enhance the basic functionality of Traffic Ops in a custom manner. There are three types of extensions:

1. Check Extensions

  These allow you to add custom checks to the "Health->Server Checks" view.

2. Configuration Extensions

  These allow you to add custom configuration file generators.

3. Data source Extensions

  These allow you to add statistic sources for the graph views and APIs.

Extensions are managed using the $TO_HOME/bin/extensions command line script. For more information see :ref:`admin-to-ext-script`.

Check Extensions
----------------

In other words, check extensions are scripts that, after registering with Traffic Ops, have a column reserved in the "Health->Server Checks" view and that usually run periodically out of cron.

.. |checkmark| image:: ../../../traffic_ops/app/public/images/good.png 

.. |X| image:: ../../../traffic_ops/app/public/images/bad.png


It is the responsibility of the check extension script to iterate over the servers it wants to check and post the results.

An example script might proceed by logging into the Traffic Ops server using the HTTPS base_url provided on the command line. The script is hardcoded with an auth token that is also provisioned in the Traffic Ops User database. This token allows the script to obtain a cookie used in later communications with the Traffic Ops API. The script then obtains a list of all caches to be polled by accessing Traffic Ops' ``/api/1.1/servers.json`` REST target. This list is walked, running a command to gather the stats from that cache. For some extensions, an HTTP GET request might be made to the ATS astats plugin, while for others the cache might be pinged, or a command run over SSH. The results are then compiled into a numeric or boolean result and the script POSTs tha result back to the Traffic Ops ``/api/1.1/servercheck/`` target.

A check extension can have a column of |checkmark|'s and |X|'s (CHECK_EXTENSION_BOOL) or a column that shows a number (CHECK_EXTENSION_NUM).A simple example of a check extension of type CHECK_EXTENSION_NUM that will show 99.33 for all servers of type EDGE is shown below: :: 


  Script here.

Check Extension scripts are located in the $TO_HOME/bin/checks directory.

Currently, the following Check Extensions are available and installed by default:

**Cache Disk Usage Check - CDU**
  This check shows how much of the available total cache disk is in use. A "warm" cache should show 100.00.

**Cache Hit Ratio Check - CHR**
  The cache hit ratio for the cache in the last 15 minutes (the interval is determined by the cron entry). 

**DiffServe CodePoint Check - DSCP**
  Checks if the returning traffic from the cache has the correct DSCP value as assigned in the delivery service. (Some routers will overwrite DSCP)

**Maximum Transmission Check - MTU**
  Checks if the Traffic Ops host (if that is the one running the check) can send and receive 8192 size packets to the ``ip_address`` of the server in the server table.

**Operational Readiness Check - ORT**
  See :ref:`reference-traffic-ops-ort` for more information on the ort script. The ORT column shows how many changes the traffic_ops_ort.pl script would apply if it was run. The number in this column should be 0. 

**Ping Check - 10G, ILO, 10G6, FQDN**
  The bin/checks/ToPingCheck.pl is to check basic IP connectivity, and in the default setup it checks IP connectivity to the following:
  
  10G
    Is the ``ip_address`` (the main IPv4 address) from the server table pingable?
  ILO
    Is the ``ilo_ip_address`` (the lights-out-mangement IPv4 address) from the server table pingable?
  10G6
    Is the ``ip6_address`` (the main IPv6 address) from the server table pingable?
  FQDN 
    Is the Fully Qualified Domain name (the concatenation of ``host_name`` and ``.`` and ``domain_name`` from the server table) pingable?

**Traffic Router Check - RTR**
  Checks the state of each cache as perceived by all Traffic Monitors (via Traffic Router). This extension asks each Traffic Router for the state of the cache. A check failure is indicated if one or more monitors report an error for a cache. A cache is only marked as good if all reports are positive. (This is a pessimistic approach, opposite of how TM marks a cache as up, "the optimistic approach")
  

Configuration Extensions
------------------------
NOTE: Config Extensions are Beta at this time.


Data Source Extensions
----------------------
Traffic Ops has the ability to load custom code at runtime that allow any CDN user to build custom APIs for any requirement that Traffic Ops does not fulfill.  There are two classes of Data Source Extensions, private and public.  Private extensions are Traffic Ops extensions that are not publicly available, and should be kept in the /opt/traffic_ops_extensions/private/lib. Public extensions are Traffic Ops extensions that are Open Source in nature and free to enhance or contribute back to the Traffic Ops Open Source project and should be kept in /opt/traffic_ops/app/lib/Extensions.


Extensions at Runtime
---------------------
The search path for extensions depends on the configuration of the PERL5LIB, which is preconfigured in the Traffic Ops start scripts.  The following directory structure is where Traffic Ops will look for Extensions in this order.

Extension Directories
---------------------
PERL5LIB Example Configuration: ::

   export PERL5LIB=/opt/traffic_ops_extensions/private/lib/Extensions:/opt/traffic_ops/app/lib/Extensions/TrafficStats

Perl Package Naming Convention
------------------------------
To prevent Extension namespace collisions within Traffic Ops all Extensions should follow the package naming convention below:

Extensions::<ExtensionName>

Data Source Extension Perl package name example
Extensions::TrafficStats
Extensions::YourCustomExtension

TrafficOpsRoutes.pm
-------------------
Traffic Ops accesses each extension through the addition of a URL route as a custom hook.  These routes will be defined in a file called TrafficOpsRoutes.pm that should live in the top directory of your Extension.  The routes that are defined should follow the Mojolicious route conventions.


Development Configuration
--------------------------
To incorporate any custom Extensions during development set your PERL5LIB with any number of directories with the understanding that the PERL5LIB search order will come into play, so keep in mind that top-down is how your code will be located.  Once Perl locates your custom route or Perl package/class it 'pins' on that class or Mojo Route and doesn't look any further, which allows for the developer to *override* Traffic Ops functionality.

API
===
The Traffic Ops API provides programmatic access to read and write CDN data providing authorized API consumers with the ability to monitor CDN performance and configure CDN settings and parameters.

Response Structure
------------------
All successful responses have the following structure: ::

    {
      "response": <JSON object with main response>,
    }

To make the documentation easier to read, only the ``<JSON object with main response>`` is documented, even though the response and version fields are always present. 

Using API Endpoints
-------------------
1. Authenticate with your Traffic Portal or Traffic Ops user account credentials.
2. Upon successful user authentication, note the mojolicious cookie value in the response headers. 
3. Pass the mojolicious cookie value, along with any subsequent calls to an authenticated API endpoint.

Example: ::
  
    [jvd@laika ~]$ curl -H "Accept: application/json" http://localhost:3000/api/1.1/usage/asns.json
    {"alerts":[{"level":"error","text":"Unauthorized, please log in."}]}
    [jvd@laika ~]$
    [jvd@laika ~]$ curl -v -H "Accept: application/json" -v -X POST --data '{ "u":"admin", "p":"secret_passwd" }' http://localhost:3000/api/1.1/user/login
    * Hostname was NOT found in DNS cache
    *   Trying ::1...
    * connect to ::1 port 3000 failed: Connection refused
    *   Trying 127.0.0.1...
    * Connected to localhost (127.0.0.1) port 3000 (#0)
    > POST /api/1.1/user/login HTTP/1.1
    > User-Agent: curl/7.37.1
    > Host: localhost:3000
    > Accept: application/json
    > Content-Length: 32
    > Content-Type: application/x-www-form-urlencoded
    >
    * upload completely sent off: 32 out of 32 bytes
    < HTTP/1.1 200 OK
    < Connection: keep-alive
    < Access-Control-Allow-Methods: POST,GET,OPTIONS,PUT,DELETE
    < Access-Control-Allow-Origin: http://localhost:8080
    < Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
    < Set-Cookie: mojolicious=eyJleHBpcmVzIjoxNDI5NDAyMjAxLCJhdXRoX2RhdGEiOiJhZG1pbiJ9--f990d03b7180b1ece97c3bb5ca69803cd6a79862; expires=Sun, 19 Apr 2015 00:10:01 GMT; path=/; HttpOnly
    < Content-Type: application/json
    < Date: Sat, 18 Apr 2015 20:10:01 GMT
    < Access-Control-Allow-Credentials: true
    < Content-Length: 81
    < Cache-Control: no-cache, no-store, max-age=0, must-revalidate
    * Server Mojolicious (Perl) is not blacklisted
    < Server: Mojolicious (Perl)
    <
    * Connection #0 to host localhost left intact
    {"alerts":[{"level":"success","text":"Successfully logged in."}]}
    [jvd@laika ~]$

    [jvd@laika ~]$ curl -H'Cookie: mojolicious=eyJleHBpcmVzIjoxNDI5NDAyMjAxLCJhdXRoX2RhdGEiOiJhZG1pbiJ9--f990d03b7180b1ece97c3bb5ca69803cd6a79862;' -H "Accept: application/json" http://localhost:3000/api/1.1/asns.json
    {"response":{"asns":[{"lastUpdated":"2012-09-17 15:41:22", .. asn data deleted ..   ,}
    [jvd@laika ~]$

API Errors
----------

**Response Properties**

+----------------------+--------+------------------------------------------------+
| Parameter            | Type   | Description                                    |
+======================+========+================================================+
|``alerts``            | array  | A collection of alert messages.                |
+----------------------+--------+------------------------------------------------+
| ``>level``           | string | Success, info, warning or error.               |
+----------------------+--------+------------------------------------------------+
| ``>text``            | string | Alert message.                                 |
+----------------------+--------+------------------------------------------------+

The 3 most common errors returned by Traffic Ops are:

401 Unauthorized
  When you don't supply the right cookie, this is the response. :: 

    [jvd@laika ~]$ curl -v -H "Accept: application/json" http://localhost:3000/api/1.1/usage/asns.json
    * Hostname was NOT found in DNS cache
    *   Trying ::1...
    * connect to ::1 port 3000 failed: Connection refused
    *   Trying 127.0.0.1...
    * Connected to localhost (127.0.0.1) port 3000 (#0)
    > GET /api/1.1/usage/asns.json HTTP/1.1
    > User-Agent: curl/7.37.1
    > Host: localhost:3000
    > Accept: application/json
    >
    < HTTP/1.1 401 Unauthorized
    < Cache-Control: no-cache, no-store, max-age=0, must-revalidate
    < Content-Length: 84
    * Server Mojolicious (Perl) is not blacklisted
    < Server: Mojolicious (Perl)
    < Connection: keep-alive
    < Access-Control-Allow-Methods: POST,GET,OPTIONS,PUT,DELETE
    < Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
    < Access-Control-Allow-Origin: http://localhost:8080
    < Date: Sat, 18 Apr 2015 20:36:12 GMT
    < Content-Type: application/json
    < Access-Control-Allow-Credentials: true
    <
    * Connection #0 to host localhost left intact
    {"alerts":[{"level":"error","text":"Unauthorized, please log in."}]}
    [jvd@laika ~]$

404 Not Found
  When the resource (path) is non existent Traffic Ops returns a 404::

    [jvd@laika ~]$ curl -v -H'Cookie: mojolicious=eyJleHBpcmVzIjoxNDI5NDAyMjAxLCJhdXRoX2RhdGEiOiJhZG1pbiJ9--f990d03b7180b1ece97c3bb5ca69803cd6a79862;' -H "Accept: application/json" http://localhost:3000/api/1.1/asnsjj.json
    * Hostname was NOT found in DNS cache
    *   Trying ::1...
    * connect to ::1 port 3000 failed: Connection refused
    *   Trying 127.0.0.1...
    * Connected to localhost (127.0.0.1) port 3000 (#0)
    > GET /api/1.1/asnsjj.json HTTP/1.1
    > User-Agent: curl/7.37.1
    > Host: localhost:3000
    > Cookie: mojolicious=eyJleHBpcmVzIjoxNDI5NDAyMjAxLCJhdXRoX2RhdGEiOiJhZG1pbiJ9--f990d03b7180b1ece97c3bb5ca69803cd6a79862;
    > Accept: application/json
    >
    < HTTP/1.1 404 Not Found
    * Server Mojolicious (Perl) is not blacklisted
    < Server: Mojolicious (Perl)
    < Content-Length: 75
    < Cache-Control: no-cache, no-store, max-age=0, must-revalidate
    < Content-Type: application/json
    < Date: Sat, 18 Apr 2015 20:37:43 GMT
    < Access-Control-Allow-Credentials: true
    < Set-Cookie: mojolicious=eyJleHBpcmVzIjoxNDI5NDAzODYzLCJhdXRoX2RhdGEiOiJhZG1pbiJ9--8a5a61b91473bc785d4073fe711de8d2c63f02dd; expires=Sun, 19 Apr 2015 00:37:43 GMT; path=/; HttpOnly
    < Access-Control-Allow-Methods: POST,GET,OPTIONS,PUT,DELETE
    < Connection: keep-alive
    < Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
    < Access-Control-Allow-Origin: http://localhost:8080
    <
    * Connection #0 to host localhost left intact
    {"alerts":[{"text":"Resource not found.","level":"error"}]}
    [jvd@laika ~]$

500 Internal Server Error
  When you are asking for a correct path, but the database doesn't match, it returns a 500:: 

    [jvd@laika ~]$ curl -v -H'Cookie: mojolicious=eyJleHBpcmVzIjoxNDI5NDAyMjAxLCJhdXRoX2RhdGEiOiJhZG1pbiJ9--f990d03b7180b1ece97c3bb5ca69803cd6a79862;' -H "Accept: application/json" http://localhost:3000/api/1.1/servers/hostname/jj/details.json
    * Hostname was NOT found in DNS cache
    *   Trying ::1...
    * connect to ::1 port 3000 failed: Connection refused
    *   Trying 127.0.0.1...
    * Connected to localhost (127.0.0.1) port 3000 (#0)
    > GET /api/1.1/servers/hostname/jj/details.json HTTP/1.1
    > User-Agent: curl/7.37.1
    > Host: localhost:3000
    > Cookie: mojolicious=eyJleHBpcmVzIjoxNDI5NDAyMjAxLCJhdXRoX2RhdGEiOiJhZG1pbiJ9--f990d03b7180b1ece97c3bb5ca69803cd6a79862;
    > Accept: application/json
    >
    < HTTP/1.1 500 Internal Server Error
    * Server Mojolicious (Perl) is not blacklisted
    < Server: Mojolicious (Perl)
    < Cache-Control: no-cache, no-store, max-age=0, must-revalidate
    < Content-Length: 93
    < Set-Cookie: mojolicious=eyJhdXRoX2RhdGEiOiJhZG1pbiIsImV4cGlyZXMiOjE0Mjk0MDQzMDZ9--1b08977e91f8f68b0ff5d5e5f6481c76ddfd0853; expires=Sun, 19 Apr 2015 00:45:06 GMT; path=/; HttpOnly
    < Content-Type: application/json
    < Date: Sat, 18 Apr 2015 20:45:06 GMT
    < Access-Control-Allow-Credentials: true
    < Access-Control-Allow-Methods: POST,GET,OPTIONS,PUT,DELETE
    < Connection: keep-alive
    < Access-Control-Allow-Headers: Origin, X-Requested-With, Content-Type, Accept
    < Access-Control-Allow-Origin: http://localhost:8080
    <
    * Connection #0 to host localhost left intact
    {"alerts":[{"level":"error","text":"An error occurred. Please contact your administrator."}]}
    [jvd@laika ~]$

  The rest of the API documentation will only document the ``200 OK`` case, where no errors have occured.

Traffic Ops API Routes
----------------------

.. toctree:: 
  :maxdepth: 1

  traffic_ops_api/routes

API 1.1 Reference 
-----------------

.. toctree:: 
  :maxdepth: 1

  traffic_ops_api/v11/asn
  traffic_ops_api/v11/cachegroup
  traffic_ops_api/v11/cdn
  traffic_ops_api/v11/changelog
  traffic_ops_api/v11/deliveryservice
  traffic_ops_api/v11/hwinfo
  traffic_ops_api/v11/parameter
  traffic_ops_api/v11/phys_location
  traffic_ops_api/v11/profile
  traffic_ops_api/v11/region
  traffic_ops_api/v11/role
  traffic_ops_api/v11/server
  traffic_ops_api/v11/static_dns
  traffic_ops_api/v11/status
  traffic_ops_api/v11/system
  traffic_ops_api/v11/to_extension
  traffic_ops_api/v11/type
  traffic_ops_api/v11/user

API 1.2 Reference
-----------------

.. toctree:: 
  :maxdepth: 1

  traffic_ops_api/v12/api_capability
  traffic_ops_api/v12/asn
  traffic_ops_api/v12/cachegroup
  traffic_ops_api/v12/cachegroup_parameter
  traffic_ops_api/v12/cache_stats
  traffic_ops_api/v12/capability
  traffic_ops_api/v12/cdn
  traffic_ops_api/v12/changelog
  traffic_ops_api/v12/configfiles_ats
  traffic_ops_api/v12/deliveryservice
  traffic_ops_api/v12/deliveryservice_regex
  traffic_ops_api/v12/deliveryservice_stats
  traffic_ops_api/v12/division
  traffic_ops_api/v12/federation
  traffic_ops_api/v12/hwinfo
  traffic_ops_api/v12/job
  traffic_ops_api/v12/parameter
  traffic_ops_api/v12/phys_location
  traffic_ops_api/v12/profile
  traffic_ops_api/v12/profile_parameter
  traffic_ops_api/v12/influxdb
  traffic_ops_api/v12/region
  traffic_ops_api/v12/role
  traffic_ops_api/v12/server
  traffic_ops_api/v12/static_dns
  traffic_ops_api/v12/status
  traffic_ops_api/v12/steering_target
  traffic_ops_api/v12/system
  traffic_ops_api/v12/tenant
  traffic_ops_api/v12/to_extension
  traffic_ops_api/v12/type
  traffic_ops_api/v12/user
  traffic_ops_api/v12/topology