<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema"
            targetNamespace="http://java.sun.com/xml/ns/javaee"
            xmlns:javaee="http://java.sun.com/xml/ns/javaee"
            xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            version="1.3">
  <xsd:annotation>
    <xsd:documentation>

      DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.

      Copyright 2003-2009 Sun Microsystems, Inc. All rights reserved.

      The contents of this file are subject to the terms of either the
      GNU General Public License Version 2 only ("GPL") or the Common
      Development and Distribution License("CDDL") (collectively, the
      "License").  You may not use this file except in compliance with
      the License. You can obtain a copy of the License at
      https://glassfish.dev.java.net/public/CDDL+GPL.html or
      glassfish/bootstrap/legal/LICENSE.txt.  See the License for the
      specific language governing permissions and limitations under the
      License.

      When distributing the software, include this License Header
      Notice in each file and include the License file at
      glassfish/bootstrap/legal/LICENSE.txt.  Sun designates this
      particular file as subject to the "Classpath" exception as
      provided by Sun in the GPL Version 2 section of the License file
      that accompanied this code.  If applicable, add the following
      below the License Header, with the fields enclosed by brackets []
      replaced by your own identifying information:
      "Portions Copyrighted [year] [name of copyright owner]"

      Contributor(s):

      If you wish your version of this file to be governed by only the
      CDDL or only the GPL Version 2, indicate your decision by adding
      "[Contributor] elects to include this software in this
      distribution under the [CDDL or GPL Version 2] license."  If you
      don't indicate a single choice of license, a recipient has the
      option to distribute your version of this file under either the
      CDDL, the GPL Version 2 or to extend the choice of license to its
      licensees as provided above.  However, if you add GPL Version 2
      code and therefore, elected the GPL Version 2 license, then the
      option applies only if the new code is made subject to such
      option by the copyright holder.

    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>
      The Apache Software Foundation elects to include this software under the
      CDDL license.
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      (C) Copyright International Business Machines Corporation 2002

    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>
<![CDATA[[
      The webservices element is the root element for the web services
      deployment descriptor.  It specifies the set of web service
      descriptions that are to be deployed into the Java EE Application
      Server and the dependencies they have on container resources and
      services.  The deployment descriptor must be named
      "META-INF/webservices.xml" in the web services' jar file.

      Used in: webservices.xml

      All webservices deployment descriptors must indicate the
      webservices schema by using the Java EE namespace:

      http://java.sun.com/xml/ns/javaee

      and by indicating the version of the schema by using the version
      element as shown below:

      <webservices xmlns="http://java.sun.com/xml/ns/javaee"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
        http://java.sun.com/xml/ns/javaee/javaee_web_services_1_3.xsd"
      version="1.3">
      ...
      </webservices>

      The instance documents may indicate the published version of the
      schema using the xsi:schemaLocation attribute for the Java EE
      namespace with the following location:

      http://java.sun.com/xml/ns/javaee/javaee_web_services_1_3.xsd

]]>
    </xsd:documentation>
  </xsd:annotation>

  <xsd:annotation>
    <xsd:documentation>

      The following conventions apply to all Java EE
      deployment descriptor elements unless indicated otherwise.

      - In elements that specify a pathname to a file within the
      same JAR file, relative filenames (i.e., those not
      starting with "/") are considered relative to the root of
      the JAR file's namespace.  Absolute filenames (i.e., those
      starting with "/") also specify names in the root of the
      JAR file's namespace.  In general, relative names are
      preferred.  The exception is .war files where absolute
      names are preferred for consistency with the Servlet API.

    </xsd:documentation>
  </xsd:annotation>

  <xsd:include schemaLocation="javaee_6.xsd"/>


<!-- **************************************************** -->

  <xsd:element name="webservices"
               type="javaee:webservicesType">
    <xsd:annotation>
      <xsd:documentation>

        The webservices element is the root element for the web services
        deployment descriptor.  It specifies the set of web service
        descriptions that are to be deployed into the Java EE Application Server
        and the dependencies they have on container resources and services.

        Used in: webservices.xml

      </xsd:documentation>
    </xsd:annotation>
    <xsd:key name="webservice-description-name-key">
      <xsd:annotation>
        <xsd:documentation>

          The webservice-description-name identifies the collection of
          port-components associated with a WSDL file and JAX-RPC mapping. The
          name must be unique within the deployment descriptor.

        </xsd:documentation>
      </xsd:annotation>
      <xsd:selector xpath="javaee:webservice-description"/>
      <xsd:field xpath="javaee:webservice-description-name"/>
    </xsd:key>
  </xsd:element>


<!-- **************************************************** -->

  <xsd:complexType name="port-componentType">
    <xsd:annotation>
      <xsd:documentation>

        The port-component element associates a WSDL port with a web service
        interface and implementation.  It defines the name of the port as a
        component, optional description, optional display name, optional iconic
        representations, WSDL port QName, Service Endpoint Interface, Service
        Implementation Bean.

        This element also associates a WSDL service with a JAX-WS Provider
        implementation.

      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="1"/>
      <xsd:element name="display-name"
                   type="javaee:display-nameType"
                   minOccurs="0"
                   maxOccurs="1"/>
      <xsd:element name="icon"
                   type="javaee:iconType"
                   minOccurs="0"
                   maxOccurs="1"/>
      <xsd:element name="port-component-name"
                   type="javaee:string">
        <xsd:annotation>
          <xsd:documentation>
<![CDATA[[
            The port-component-name element specifies a port component's
            name.  This name is assigned by the module producer to name
            the service implementation bean in the module's deployment
            descriptor. The name must be unique among the port component
            names defined in the same module.

            Used in: port-component

            Example:
                      <port-component-name>EmployeeService
                      </port-component-name>

]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="wsdl-service"
                   type="javaee:xsdQNameType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            Defines the name space and local name part of the WSDL
            service QName. This is required to be specified for
            port components that are JAX-WS Provider implementations.

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="wsdl-port"
                   type="javaee:xsdQNameType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            Defines the name space and local name part of the WSDL
            port QName. This is not required to be specified for port
            components that are JAX-WS Provider implementations

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="enable-mtom"
                   type="javaee:true-falseType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            Used to enable or disable SOAP MTOM/XOP mechanism for an
            endpoint implementation.

            Not to be specified for JAX-RPC runtime

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="mtom-threshold"
                   type="javaee:xsdNonNegativeIntegerType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            When MTOM is enabled, binary data above this size in bytes
            will be XOP encoded or sent as attachment. Default value is 0.

            Not to be specified for JAX-RPC runtime

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="addressing"
                   type="javaee:addressingType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            This specifies the WS-Addressing requirements for a JAX-WS
            web service. It corresponds to javax.xml.ws.soap.Addressing
            annotation or its feature javax.xml.ws.soap.AddressingFeature.

            See the addressingType for more information.

            Not to be specified for JAX-RPC runtime

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="respect-binding"
                   type="javaee:respect-bindingType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            Corresponds to the javax.xml.ws.RespectBinding annotation
            or its corresponding javax.xml.ws.RespectBindingFeature web
            service feature. This is used to control whether a JAX-WS
            implementation must respect/honor the contents of the
            wsdl:binding in the WSDL that is associated with the service.

            Not to be specified for JAX-RPC runtime

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="protocol-binding"
                   type="javaee:protocol-bindingType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            Used to specify the protocol binding used by the port-component.
            If this element is not specified, then the default binding is
            used (SOAP 1.1 over HTTP)

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="service-endpoint-interface"
                   type="javaee:fully-qualified-classType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>
<![CDATA[[
            The service-endpoint-interface element contains the
            fully-qualified name of the port component's Service Endpoint
            Interface.

            Used in: port-component

            Example:
                      <remote>com.wombat.empl.EmployeeService</remote>

            This may not be specified in case there is no Service
            Enpoint Interface as is the case with directly using an
            implementation class with the @WebService annotation.

            When the port component is a Provider implementation
            this is not specified.

]]>
          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="service-impl-bean"
                   type="javaee:service-impl-beanType"/>
      <xsd:choice>
        <xsd:element name="handler"
                     type="javaee:handlerType"
                     minOccurs="0"
                     maxOccurs="unbounded">
          <xsd:annotation>
            <xsd:documentation>

                 To be used with JAX-RPC based runtime only.

            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
        <xsd:element name="handler-chains"
                     type="javaee:handler-chainsType"
                     minOccurs="0"
                     maxOccurs="1">
          <xsd:annotation>
            <xsd:documentation>

                 To be used with JAX-WS based runtime only.

            </xsd:documentation>
          </xsd:annotation>
        </xsd:element>
      </xsd:choice>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="service-impl-beanType">
    <xsd:annotation>
      <xsd:documentation>

        The service-impl-bean element defines the web service implementation.
        A service implementation can be an EJB bean class or JAX-RPC web
        component.  Existing EJB implementations are exposed as a web service
        using an ejb-link.

        Used in: port-component

      </xsd:documentation>
    </xsd:annotation>
    <xsd:choice>
      <xsd:element name="ejb-link"
                   type="javaee:ejb-linkType"/>
      <xsd:element name="servlet-link"
                   type="javaee:servlet-linkType"/>
    </xsd:choice>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="servlet-linkType">
    <xsd:annotation>
      <xsd:documentation>
<![CDATA[[
        The servlet-link element is used in the service-impl-bean element
        to specify that a Service Implementation Bean is defined as a
        JAX-RPC Service Endpoint.

        The value of the servlet-link element must be the servlet-name of
        a JAX-RPC Service Endpoint in the same WAR file.

        Used in: service-impl-bean

        Example:
              <servlet-link>StockQuoteService</servlet-link>

]]>
      </xsd:documentation>
    </xsd:annotation>
    <xsd:simpleContent>
      <xsd:restriction base="javaee:string"/>
    </xsd:simpleContent>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="webservice-descriptionType">
    <xsd:annotation>
      <xsd:documentation>

        The webservice-description element defines a WSDL document file
        and the set of Port components associated with the WSDL ports
        defined in the WSDL document.  There may be multiple
        webservice-descriptions defined within a module.

        All WSDL file ports must have a corresponding port-component element
        defined.

        Used in: webservices

      </xsd:documentation>
    </xsd:annotation>
    <xsd:sequence>
      <xsd:element name="description"
                   type="javaee:descriptionType"
                   minOccurs="0"
                   maxOccurs="1"/>
      <xsd:element name="display-name"
                   type="javaee:display-nameType"
                   minOccurs="0"
                   maxOccurs="1"/>
      <xsd:element name="icon"
                   type="javaee:iconType"
                   minOccurs="0"
                   maxOccurs="1"/>
      <xsd:element name="webservice-description-name"
                   type="javaee:string">
        <xsd:annotation>
          <xsd:documentation>

            The webservice-description-name identifies the collection of
            port-components associated with a WSDL file and JAX-RPC
            mapping. The name must be unique within the deployment descriptor.

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="wsdl-file"
                   type="javaee:pathType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            The wsdl-file element contains the name of a WSDL file in the
            module.  The file name is a relative path within the module.

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="jaxrpc-mapping-file"
                   type="javaee:pathType"
                   minOccurs="0"
                   maxOccurs="1">
        <xsd:annotation>
          <xsd:documentation>

            The jaxrpc-mapping-file element contains the name of a file that
            describes the JAX-RPC mapping between the Java interfaces used by
            the application and the WSDL description in the wsdl-file.  The
            file name is a relative path within the module.

            This is not required when JAX-WS based runtime is used.

          </xsd:documentation>
        </xsd:annotation>
      </xsd:element>
      <xsd:element name="port-component"
                   type="javaee:port-componentType"
                   minOccurs="1"
                   maxOccurs="unbounded">
        <xsd:key name="port-component_handler-name-key">
          <xsd:annotation>
            <xsd:documentation>

              Defines the name of the handler. The name must be unique
              within the module.

            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:handler"/>
          <xsd:field xpath="javaee:handler-name"/>
        </xsd:key>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>


<!-- **************************************************** -->

  <xsd:complexType name="webservicesType">
    <xsd:sequence>
      <xsd:group ref="javaee:descriptionGroup"/>
      <xsd:element name="webservice-description"
                   type="javaee:webservice-descriptionType"
                   minOccurs="1"
                   maxOccurs="unbounded">
        <xsd:key name="port-component-name-key">
          <xsd:annotation>
            <xsd:documentation>
<![CDATA[[
                The port-component-name element specifies a port
                component's name.  This name is assigned by the module
                producer to name the service implementation bean in the
                module's deployment descriptor. The name must be unique
                among the port component names defined in the same module.

                Used in: port-component

                Example:
                    <port-component-name>EmployeeService
                    </port-component-name>


]]>
            </xsd:documentation>
          </xsd:annotation>
          <xsd:selector xpath="javaee:port-component"/>
          <xsd:field xpath="javaee:port-component-name"/>
        </xsd:key>
      </xsd:element>
    </xsd:sequence>
    <xsd:attribute name="version"
                   type="javaee:dewey-versionType"
                   fixed="1.3"
                   use="required">
      <xsd:annotation>
        <xsd:documentation>

          The required value for the version is 1.3.

        </xsd:documentation>
      </xsd:annotation>
    </xsd:attribute>
    <xsd:attribute name="id"
                   type="xsd:ID"/>
  </xsd:complexType>

</xsd:schema>