/*
 *  Licensed to the Apache Software Foundation (ASF) under one or more
 *  contributor license agreements.  See the NOTICE file distributed with
 *  this work for additional information regarding copyright ownership.
 *  The ASF licenses this file to You under the Apache License, Version 2.0
 *  (the "License"); you may not use this file except in compliance with
 *  the License.  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 */

package org.apache.tomcat.jni;

/** SSL Context
 *
 * @author Mladen Turk
 * @version $Revision$, $Date$
 */

public final class SSLContext {


    /**
     * Initialize new SSL context
     * @param pool The pool to use.
     * @param protocol The SSL protocol to use. It can be one of:
     * <PRE>
     * SSL_PROTOCOL_SSLV2
     * SSL_PROTOCOL_SSLV3
     * SSL_PROTOCOL_SSLV2 | SSL_PROTOCOL_SSLV3
     * SSL_PROTOCOL_TLSV1
     * SSL_PROTOCOL_ALL
     * </PRE>
     * @param mode SSL mode to use
     * <PRE>
     * SSL_MODE_CLIENT
     * SSL_MODE_SERVER
     * SSL_MODE_COMBINED
     * </PRE>
     */
    public static native long make(long pool, int protocol, int mode)
        throws Exception;

    /**
     * Free the resources used by the Context
     * @param ctx Server or Client context to free.
     * @return APR Status code.
     */
    public static native int free(long ctx);

    /**
     * Set Session context id. Usually host:port combination.
     * @param ctx Context to use.
     * @param id  String that uniquely identifies this context.
     */
    public static native void setContextId(long ctx, String id);

    /**
     * Asssociate BIOCallback for input or output data capture.
     * <br />
     * First word in the output string will contain error
     * level in the form:
     * <PRE>
     * [ERROR]  -- Critical error messages
     * [WARN]   -- Varning messages
     * [INFO]   -- Informational messages
     * [DEBUG]  -- Debugging messaged
     * </PRE>
     * Callback can use that word to determine application logging level
     * by intercepting <b>write</b> call.
     * If the <b>bio</b> is set to 0 no error messages will be displayed.
     * Default is to use the stderr output stream.
     * @param ctx Server or Client context to use.
     * @param bio BIO handle to use, created with SSL.newBIO
     * @param dir BIO direction (1 for input 0 for output).
     */
    public static native void setBIO(long ctx, long bio, int dir);

    /**
     * Set OpenSSL Option.
     * @param ctx Server or Client context to use.
     * @param options  See SSL.SSL_OP_* for option flags.
     */
    public static native void setOptions(long ctx, int options);

    /**
     * Sets the "quiet shutdown" flag for <b>ctx</b> to be
     * <b>mode</b>. SSL objects created from <b>ctx</b> inherit the
     * <b>mode</b> valid at the time and may be 0 or 1.
     * <br />
     * Normally when a SSL connection is finished, the parties must send out
     * "close notify" alert messages using L<SSL_shutdown(3)|SSL_shutdown(3)>
     * for a clean shutdown.
     * <br />
     * When setting the "quiet shutdown" flag to 1, <b>SSL.shutdown</b>
     * will set the internal flags to SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN.
     * (<b>SSL_shutdown</b> then behaves like called with
     * SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN.)
     * The session is thus considered to be shutdown, but no "close notify" alert
     * is sent to the peer. This behaviour violates the TLS standard.
     * The default is normal shutdown behaviour as described by the TLS standard.
     * @param ctx Server or Client context to use.
     * @param mode True to set the quiet shutdown.
     */
    public static native void setQuietShutdown(long ctx, boolean mode);

    /**
     * Cipher Suite available for negotiation in SSL handshake.
     * <br />
     * This complex directive uses a colon-separated cipher-spec string consisting
     * of OpenSSL cipher specifications to configure the Cipher Suite the client
     * is permitted to negotiate in the SSL handshake phase. Notice that this
     * directive can be used both in per-server and per-directory context.
     * In per-server context it applies to the standard SSL handshake when a
     * connection is established. In per-directory context it forces a SSL
     * renegotation with the reconfigured Cipher Suite after the HTTP request
     * was read but before the HTTP response is sent.
     * @param ctx Server or Client context to use.
     * @param ciphers An SSL cipher specification.
     */
    public static native boolean setCipherSuite(long ctx, String ciphers)
        throws Exception;

    /**
     * Set File of concatenated PEM-encoded CA CRLs or
     * directory of PEM-encoded CA Certificates for Client Auth
     * <br />
     * This directive sets the all-in-one file where you can assemble the
     * Certificate Revocation Lists (CRL) of Certification Authorities (CA)
     * whose clients you deal with. These are used for Client Authentication.
     * Such a file is simply the concatenation of the various PEM-encoded CRL
     * files, in order of preference.
     * <br />
     * The files in this directory have to be PEM-encoded and are accessed through
     * hash filenames. So usually you can't just place the Certificate files there:
     * you also have to create symbolic links named hash-value.N. And you should
     * always make sure this directory contains the appropriate symbolic links.
     * Use the Makefile which comes with mod_ssl to accomplish this task.
     * @param ctx Server or Client context to use.
     * @param file File of concatenated PEM-encoded CA CRLs for Client Auth.
     * @param path Directory of PEM-encoded CA Certificates for Client Auth.
     */
    public static native boolean setCARevocation(long ctx, String file,
                                                 String path)
        throws Exception;

    /**
     * Set File of PEM-encoded Server CA Certificates
     * <br />
     * This directive sets the optional all-in-one file where you can assemble the
     * certificates of Certification Authorities (CA) which form the certificate
     * chain of the server certificate. This starts with the issuing CA certificate
     * of of the server certificate and can range up to the root CA certificate.
     * Such a file is simply the concatenation of the various PEM-encoded CA
     * Certificate files, usually in certificate chain order.
     * <br />
     * But be careful: Providing the certificate chain works only if you are using
     * a single (either RSA or DSA) based server certificate. If you are using a
     * coupled RSA+DSA certificate pair, this will work only if actually both
     * certificates use the same certificate chain. Else the browsers will be
     * confused in this situation.
     * @param ctx Server or Client context to use.
     * @param file File of PEM-encoded Server CA Certificates.
     * @param skipfirst Skip first certificate if chain file is inside
     *                  certificate file.
     */
    public static native boolean setCertificateChainFile(long ctx, String file,
                                                         boolean skipfirst);

    /**
     * Set Certificate
     * <br />
     * Point setCertificateFile at a PEM encoded certificate.  If
     * the certificate is encrypted, then you will be prompted for a
     * pass phrase.  Note that a kill -HUP will prompt again. A test
     * certificate can be generated with `make certificate' under
     * built time. Keep in mind that if you've both a RSA and a DSA
     * certificate you can configure both in parallel (to also allow
     * the use of DSA ciphers, etc.)
     * <br />
     * If the key is not combined with the certificate, use key param
     * to point at the key file.  Keep in mind that if
     * you've both a RSA and a DSA private key you can configure
     * both in parallel (to also allow the use of DSA ciphers, etc.)
     * @param ctx Server or Client context to use.
     * @param cert Certificate file.
     * @param key Private Key file to use if not in cert.
     * @param password Certificate password. If null and certificate
     *                 is encrypted, password prompt will be dispayed.
     * @param idx Certificate index SSL_AIDX_RSA or SSL_AIDX_DSA.
     */
    public static native boolean setCertificate(long ctx, String cert,
                                                String key, String password,
                                                int idx)
        throws Exception;

    /**
     * Set File and Directory of concatenated PEM-encoded CA Certificates
     * for Client Auth
     * <br />
     * This directive sets the all-in-one file where you can assemble the
     * Certificates of Certification Authorities (CA) whose clients you deal with.
     * These are used for Client Authentication. Such a file is simply the
     * concatenation of the various PEM-encoded Certificate files, in order of
     * preference. This can be used alternatively and/or additionally to
     * path.
     * <br />
     * The files in this directory have to be PEM-encoded and are accessed through
     * hash filenames. So usually you can't just place the Certificate files there:
     * you also have to create symbolic links named hash-value.N. And you should
     * always make sure this directory contains the appropriate symbolic links.
     * Use the Makefile which comes with mod_ssl to accomplish this task.
     * @param ctx Server or Client context to use.
     * @param file File of concatenated PEM-encoded CA Certificates for
     *             Client Auth.
     * @param path Directory of PEM-encoded CA Certificates for Client Auth.
     */
    public static native boolean setCACertificate(long ctx, String file,
                                                  String path)
        throws Exception;

    /**
     * Set SSL connection shutdown type
     * <br />
     * The following levels are available for level:
     * <PRE>
     * SSL_SHUTDOWN_TYPE_STANDARD
     * SSL_SHUTDOWN_TYPE_UNCLEAN
     * SSL_SHUTDOWN_TYPE_ACCURATE
     * </PRE>
     * @param ctx Server or Client context to use.
     * @param type Shutdown type to use.
     */
    public static native void setShutdowType(long ctx, int type);

    /**
     * Set Type of Client Certificate verification and Maximum depth of CA Certificates
     * in Client Certificate verification.
     * <br />
     * This directive sets the Certificate verification level for the Client
     * Authentication. Notice that this directive can be used both in per-server
     * and per-directory context. In per-server context it applies to the client
     * authentication process used in the standard SSL handshake when a connection
     * is established. In per-directory context it forces a SSL renegotation with
     * the reconfigured client verification level after the HTTP request was read
     * but before the HTTP response is sent.
     * <br />
     * The following levels are available for level:
     * <PRE>
     * SSL_CVERIFY_NONE           - No client Certificate is required at all
     * SSL_CVERIFY_OPTIONAL       - The client may present a valid Certificate
     * SSL_CVERIFY_REQUIRE        - The client has to present a valid Certificate
     * SSL_CVERIFY_OPTIONAL_NO_CA - The client may present a valid Certificate
     *                              but it need not to be (successfully) verifiable
     * </PRE>
     * <br />
     * The depth actually is the maximum number of intermediate certificate issuers,
     * i.e. the number of CA certificates which are max allowed to be followed while
     * verifying the client certificate. A depth of 0 means that self-signed client
     * certificates are accepted only, the default depth of 1 means the client
     * certificate can be self-signed or has to be signed by a CA which is directly
     * known to the server (i.e. the CA's certificate is under
     * <code>setCACertificatePath</code>), etc.
     * @param ctx Server or Client context to use.
     * @param level Type of Client Certificate verification.
     * @param depth Maximum depth of CA Certificates in Client Certificate
     *              verification.
     */
    public static native void setVerify(long ctx, int level, int depth);

}